(MUST WATCH) HOW TO REFILL A EPSON ET2720 ECOTANK SUBLIMATION PRINTER |

[@trapOrdoom]

Subscribed. The only channel with an angle that actually showed how to do it.

[@StraightOuttaContent]

Yes exactly! We show you how to print as well

[@dustiharrelson4818]

I have filled my printer before and needed to refill but it’s been a while since I needed to fill and I needed the refresher! Most appreciated… your instructions were easy enough to only listen to and get the job done! Got a subscriber out of this crafter!

[@StraightOuttaContent]

This video is extremely old, we don’t recommend doing any of this if you want to get into printing. We also sell transfers if you want a full color image for a shirt

[@ruthrivera3892]

Thank thank you for this video...as I threw away my original Epson bottles and had no clue how to refill..you are a life saver!!

[@StraightOuttaContent]

Haha thank you!!!! What projects are you working on?

[@shiningstarsoup]

Thank you for this walk through on using the needles, almost every video I have seen uses the autofill but the option for the needles was like $40.00 cheaper.... so thank you!

[@StraightOuttaContent]

This video is super old and way before our DTF transfers went to the moon. Please check out or most recent content.

[@mr.mycity313]

I'm gonna transfer my Epson ink to my old empty sub ink bottles and just empty sub ink into old Epson bottles! Im done w syringes, a hassle on my WF 7310! Just got a ET 3850 today! Hope it makes life easier.

[@MZWILDCAT1]

where do u get the syringes/needles

[@diannewest8469]

Thank you for this video. I'm a newbie and the beginner videos are a necessity.

[@DUCKSJO]

Thank you for the tutorial. I was getting ready to do a refill on mine. Couldn't get much of the ink out of the bottle but I see how you did it. thanks.

[@StraightOuttaContent]

kzbin.info/www/bejne/nobLm6yJi92LiLs

[@patriciajackson3883]

Can I just refill the bottles the same way and then fill up my sublimation printer because I’m afraid I might put the needle in to far would that work I have an Epson 2800 that I made into a sublimation printer

[@StraightOuttaContent]

Please don't do this. This printer is the worst printer ever. Also, this video is very old. We recommend checking out our new videos or if you need full color options email us for our DTF gang sheets at [e-mail]

[@jesusislord2149]

@@StraightOuttaContenthow is it the worst printer ever? I just bought one and am going to convert to sublimation.

[@StraightOuttaContent]

@ lol 👍🏿 k

[@jesusislord2149]

@@StraightOuttaContent I’m asking a question..?

[@DUCKSJO]

after I refill the ink do I have to do anything to the printer before using it? like calibration or anything?

[@binmabuse2987]

Is this process the same for refilling the Epson L3252 ecotank printer?

[@JenCrowley19]

I love this ink!! It’s been on sale lately too.

[@canadianchicky333]

Thank you so much! new subscriber!

[@StraightOuttaContent]

Don’t do this!

[@romalee-daniel9034]

Thank you for this video, it was very helpful, although not nearly as easy for me as it was for you. My question I looked at the front of my tank, and the ink wasn't feeling up in the front like it did with yours, does that mean I have to put more? for example, I used 2 syringes for black, and it still looks as if there is nothing there, when I did it for the blue, the ink started leaking through the outside opening on the right side where the cartridges are.

[@StraightOuttaContent]

This video is super old. I would recommend checking out our more recent videos because we are now one of the Top DTF manufactures in the country. Email us [e-mail] if you have any questions.

[@ShelleyPoarch]

I think this video and the other video to convert to sublimation printer and they are fantastic. I quick question hoping you can help. I followed and removed old ink out and got sublimation ink into printer and now the ink is not flowing through to print. Am i needing to do something to get the ink flowing again? thank you

[@StraightOuttaContent]

Old video. Please check more recent videos on this channel

[@tonygiron5746]

Great I was wondering how because I was going to start my own printing. Thanks

[@StraightOuttaContent]

Glad it was helpful!

[@rebeccamuehl2183]

Can I use a different brand ink to refill

[@StraightOuttaContent]

Yes you can but! Glad it helped but this video is super old! Definitely check out our more recent videos if you are looking for a full color transfer

[@lynzb9109]

Thank you so much, but this refill syringe do we need to wash out or just leave it as is when done using the first time

[@StraightOuttaContent]

You can just leave it the way it is. It doesn't dry out or anything

[@carolinecyr6339]

You guys are truly awesome! Thanks for those very useful videos! 🙂

[@queenrae91]

I am new to this. Excuse me if my question is odd but what if I need colors other than then ones listed on the machine. Like I here I only see a few colors what if I need a link or something like that.?

[@StraightOuttaContent]

If you're looking for a full color transfer check out our more recent videos because we're one of the largest DTF manufacturers in the country. Head on over to flashcustomtransfers.com

[@mariangies]

My 2720 printer keeps saying it’s out if paper but it has paper. Do you know how to fix that? Thanks for the video.

[@StraightOuttaContent]

First thanks for watching and hopefully I’ve earned your subscribe We kinda had this issue because of the type of paper we used. What kind of paper do you have in there? Meaning are you using sublimation paper or just normal paper?

[@SuperTeresaann]

Thank you so very much for sharing 😊

[@StraightOuttaContent]

This video is very old please don’t do it

[@Laboricuamamys2002]

I used the bottles that came with the printer(after washing them & filling them with sublimation ink) I had some ink left over. Do I have to do anything special or can I just refill with the bottles again as I did the first time? And do I have to do anything with the printer settings after filling them again?

[@StraightOuttaContent]

That's a really good idea. No, as far as I know you should be good to go.

[@magicisall111]

Hi my brother! Do you know how to print neons on this printer? Do i need to replace yellow and magenta with fluorescent inks? Please help

[@StraightOuttaContent]

We dont use this printer to print. Please check out our more recent videos using the Mimaki TXF printer

[@yvonnehayes5134]

I have an Epson ET-2800 and I tried to add ink the way you showed and it bubbles and leaked out. Yes I check the ink and it's almost empty. Please help.

[@maryvillareal282]

Thank yall for the helpful videos!! but the only question I'm left with is... 1.Do you have to unplug or turn off printer before refilling the ink?? and 2. If im not sure the brand of the sub ink i previously used, Could i just simply add it to the tanks? or is there a process i have to do? Thanks again for you's guys help!

[@maryvillareal282]

Sorry, i meant to say... on #2. Could i simply just add another brand of sub ink to the tanks?

[@karolinasantacruz6699]

Help! I have a epson et 15000 and when im filling up it spills all the ink from the bottom!!! Idk what to do HELP!

[@DiMarie90]

Hey! They no longer make the 2720, so I am looking into buying used. Can you clean the tanks out if they were previously filled with regular ink, and THEN refill with sublimation?? Or is this a no no? 😅 Thank you!!!!

[@StraightOuttaContent]

Yea this video is super old please do not do that. Please watch our more recent content. If you are looking for full color images we sell DTF transfers and also sell the printers

[@kyleepresley6037]

How do you know when it's full? Do you just look at the front ink level windows?

[@itsjustdifferenttees4004]

Do you have to turn it off before adding the ink? I may have missed that part

[@kerry-annshand6315]

I just refilled my 2720 but it's still coming out blank and saying it can damage the printer if I print without ink. I am in need of help please

[@Beremedrano24]

Do u clean the needles?

[@StraightOuttaContent]

Don’t do this

[@ebonylewis98]

Can I use another brand of sub ink ? Can I just put it in there once done ?

[@gailgilliam6122]

Thank you for this video. My question is: my Epson printer was in storage for over 5 months. Now no matter what I do I get both vertical and horizontal lines. I purchased a new Epson and I would like to transfer the ink from the old printer into the new one. Tried searching your videos but couldn’t find one. How would I do this? Thank you so much.

[@alexandraosullivan7279]

I just set up an Epson 2400 filled it with sublimation ink and all the lights are flashing. Power both wifi paper and ink. Do you know why that might be happening?

[@kathryngunter3621]

Is it really necessary to get the other different brand of sublimation ink out before putting in a new brand?

[@StraightOuttaContent]

Nope. I have a new video on how to do that

[@kathryngunter3621]

@@StraightOuttaContent Would you please send me the link I looked through your playlist and did not see it Thank you so much

[@MsJetme]

Hello do you have to unplug your printer before refilling the ink

[@StraightOuttaContent]

No, but I would recommend that you do.

[@lisamolina-armstrong6159]

What happens when I use the front half of that circle to fill the ink?

[@StraightOuttaContent]

I am uploading a new video on this entire subject as we speak. Please stay tuned with your notifications on so you dont miss this very important video about these printers.

[@Gol_gana_jerseys]

Hello, have you switched inks before? I'm already using sublimation ink on my ET2720 but want to try a different sublimation ink. Would I have to go through the conversion process? Any info would be highly appreciated

[@StraightOuttaContent]

Yea I actually have a video explaining how to remove ink you don't want and replace it with the ink you do want. Check that video out on my channel it should definitely help you

[@Gol_gana_jerseys]

@@StraightOuttaContent awesome! Will be checking out that video next!

[@Gol_gana_jerseys]

@@StraightOuttaContent mind sharing the link? Having a hard time finding the video..

[@StraightOuttaContent]

@@Gol_gana_jerseys brb let me see

[@StraightOuttaContent]

@@Gol_gana_jerseys kzbin.info/www/bejne/lWS2opt3h7-LmpI

[@SJ-qd4wb]

Do you keep going until the tank is full? I'm already two syringes in?

[@StraightOuttaContent]

There are fill lines so you can see how much is in there. You don't want to overfill it

[@sylviaearle6224]

I just found your video and I feel like an idiot. But I cannot see the ink levels on my Epson Et 2720 through the ink level windows. I have read the manual and nowhere does it say how to refill at least that I understand. By watching this I see I have to use the needles which I had no idea to do , I did guess that maybe that was what to do and did that for the black but was afraid I was going to damage something. Is there a way to tell how much ink is used or still in the tanks other than the plastic windows that don't even show any color, never have?

[@StraightOuttaContent]

lol first off you're not an idiot lol 2nd as you can see in the video I just had to wing it. It sucks cause the ink kinda stains the fill window so you really don't know how much you're adding but! if you have been using it for a long time and it seems "empty" I would suggest filling up the needle like half way and adding it slowly. The new ink will kind of show and you will be able to tell. Its better to add a little and have to add some more later then trying to fill it up and making a huge mess. I hope this bit of advice helps.

[@carlystauffer6982]

I didn’t realize it but I was refilling my ink in the first half of the little circle and not the back. Will this mess up anything??

[@StraightOuttaContent]

I don’t know what you mean by the back.

[@evonnebazemore9672]

l saved the original top so l can refill my printer, however it tells me that l needs to purchase new ink when the level on the computer showing that it fills. I don't want to over full it and then have that as a problem can you suggest how l can tell if the tank is full. Thank you Oh by the way the video that you made for cleaning your print head work very well for me l thanks and l appreciate want you doing.

[@amyalbernaz8687]

Do you rinse your syringe attachments after filling?

[@StraightOuttaContent]

This video is really old. Please check out our newest content

[@amyalbernaz8687]

@@StraightOuttaContent I searched for help dolly ink this came up first and was helpful just wanted to know how to clean or rinse or not the syringes but thanks anyways

[@oraliacontreras9646]

Hello I’m new on this what is the ink brand?

[@StraightOuttaContent]

Honestly I think its a non name brand off amazon. We love it and its the only ink that we use. The link is in the description. If you have more questions please contact my wife @flashcustomdesigns shes the pro!

[@58joanie]

I am filling a new eco tank printer. Does it need to sit awhile before using it?

[@StraightOuttaContent]

We don't use our printer. We use our $19.99 full color transfers

[@staceymedlin3673]

What happens if u put in the front when refilling, I took my ink out and put submission ink in and it's not printing anything I got the same printer

[@ivanatoledo1484]

i just turned mine into sublimation but the colors are coming out so dull :( it would be great to get a video on getting good colour!!! thanks so much for all your informative videos

[@StraightOuttaContent]

That's a good idea! My wife @flashcustomdesigns will do just that! Thank you

[@lashundawhite8230]

How do u recharge the ink after u have changed ink into sublimation ink

[@ajachimiak01]

Would this process be the same with a 2760?

[@StraightOuttaContent]

I'm not sure. We no longer use sublimation because we have a Direct to film heat transfer process that we use that allows us to do high definition full color images on anything

[@rhondacates1304]

I can not tell if the tank is empty or half full by looking at the windows on my printer. How do you tell? I shing a light on it to tell better, but they all look full. Is it normal for the tank to only take Half a syringe of ink if it is showing on my printer settings empty?

[@kita4266]

I'm having this same problem

[@christinasaravia1746]

Why does the ink not want to go in to the ink jet when I’m filling so you know

[@StraightOuttaContent]

old video, please check more recent videos

[@mr.mycity313]

You should have the link to her page to generate the traffic. JS people are lazy frfr, its very easy to search something but folks rarely will do it. I'm only commenting this because i went through your description to look for the direct link. IK this i'snt a new video but... An observation none the less... Nice vid, I'm subbing to both of y'all. I'm new to sublimation compared to yall, im gonna make some vids once I figure the new equipment out... Peace

[@StraightOuttaContent]

Thanks for the comment. But sublimation is not the way to go. Especially with DTF as such an easier option.

[@jessicapenton5616]

I removed my regular ink and put the sublimation ink in and it will not heat press to my shirt ?? Any idea what I need to do ?

[@StraightOuttaContent]

I'm confused by the question.

[@monicaducote4345]

How do you recharge your ink after filling it back up

[@StraightOuttaContent]

recharge and filling back up mean the exact same thing

[@wasakal7415]

Can you show how you print step by step how do you get good colour??

[@StraightOuttaContent]

That’s actually a really good question and yes! My wife at @flashcustomdesigns has a bunch of sublimation step by step videos on her KZbin you should check her out! I’ll also do on here on this page. That was a really good question and I hope I’ve earned your subscribe

[@bellamadre1]

Thank you!!!!

[@brendagallegos589]

I just recently converted my printer into sublimation and it made a few prints, but after it doesn’t print nothing it’s blank but I know it has ink, what can I do to fix that problem?

[@StarsHallow]

Did you ever find out what to do? I’m there now with mine

[@ldlhicks]

My ink not even coming out....printer is fresh out box...I've done several nozzle checks an head tests..

[@StraightOuttaContent]

Damn really! Maybe it’s clogged, check out my latest video on the printer and it shows you how to open the top and look at the cartridges on the inside

[@ldlhicks]

@@StraightOuttaContent can you send link because ya got a lot of vids loll...

[@emmy3269able]

Hi guys! Just converted my printer to sublimation ink and now Everytime I print the paper is completely blank. Please help 😭 thank you

[@StraightOuttaContent]

hey sorry about that. We have a fix video for this. Its on my wifes @flashcustomdesigns channel too. I am still in the hospital with covid but we both have a video to fix the issue

[@pattiamell7360]

So you do not need to reset anything?

[@StraightOuttaContent]

Nope, but I personally wouldn't do it. It jacks up the printer

[@carolynursin5363]

I try to refill my printer but it rum out at the bottom

[@jessicazaragoza5686]

Is it possible to turn this printer into an edible printer?

[@StraightOuttaContent]

Im not sure I know what that is

[@jessicazaragoza5686]

@@StraightOuttaContent a printer to use for images to put on cakes.

[@StraightOuttaContent]

@@jessicazaragoza5686 oh I don't know anything about that. You can ask my wife @flashcustomdesigns. She might knowb

[@IronWarhorsesFun]

I'm really starting to regret getting this printer. Everything is needlessly complicated.

[@StraightOuttaContent]

That’s why we made this video kzbin.info/www/bejne/r4XSnauKorOXeZo

[@StraightOuttaContent]

Check out our $19.99 22” x 24” full color transfers sheets! Yes you can gang sheet!

[@ItsSoLikeSabrina]

My printer is printing blanks I just bought it

[@StraightOuttaContent]

Did you adjust the settings on the printer? They can be a little weird when first printing.

[@ItsSoLikeSabrina]

@@StraightOuttaContent how do I do that

[@ldlhicks]

This is my problem