The Carbon-Fiber looks so good!! (Ep #8) (4K)

➢ Website: www.streetband...
➢ Patreon: / streetbandito
We remove the engine out the Datsun! Why do you ask? Its because we begin the process of building the carbon floors. In order to start doing any of that Tim has to build his trans tunnel and in-order to accomplish this he needed to remove his engine for more space
In addition to building out the floors/trans-tunnel, we cut the rear quarter panels to test fit the Carbon Fiber skins up to the car. Now, remember this is a test fitment to see what adjustments need to be made next. So when all is said and done we will align the body panels so all body lines are in sync.
If you so happen to enjoy this build please subscribe for more updates. I release weekly updates every Thursday @ 4:00pm EST
Thanks for watching and see you again next week!
Camera Gear Used
My Vlog Camera: goo.gl/b31xKA
The Only Lens I Use With Vlog Cam: goo.gl/Rwu7PW
Video Light: goo.gl/d76uZ1
Mic I Use: goo.gl/3e6QDV
My Second Camera: goo.gl/kZxi5K
Favorite Lens For Them Sexy Close Ups: goo.gl/zjYeH3
Best Bang For Your Buck Lens: goo.gl/NZGSj9
Budget Versatile Lens: goo.gl/1LX2qm
Everyday Camera Bag: goo.gl/kJmNkp
Best Camera Case: goo.gl/k2Grf
Crazy Legs: goo.gl/eSQRZW
GO PRO 5: goo.gl/fnpFjP
Best GoPro Case: goo.gl/Feb6T5
Carbon Fiber Materials ordered here:
Dragon Plate: goo.gl/QspBBA
Fibre Glast: goo.gl/A28X94
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Music By: K.eYe.D 👹
SOUND CLOUD: goo.gl/hwPqfN
IG: goo.gl/bv5Wnk
TWITTER: goo.gl/j1XzBS
Send Free Stuff Here:
13030 9th St, #300
Bowie, MD
20720

[@tomahoks]

Damn son, your act is so cool, cheers from Finland.

[@Sulo_240L]

Torille? Or just couple beers?

[@tomahoks]

namelessvids Hell yeah, Sovjet Finland!

[@phantom5185]

@@StreetBandito And what do U do? LoL

[@SupercarSeany]

Correct me if I am wrong. Since the carbon panels were made by laying on top of the original panel... The entire car is like 3-4 mm larger? How did all the gaps stay manageable? Absolutely sick build, great camera work.

[@imissmynut]

spankjelly The Car would just grow a tiny amount like 2mm but gaps can all be sanded and gapped on each panel to get a consistent 3mm gap between doors and the quarter panel etc

[@MindDezign]

Whats all the hate for the motor choice.You all must move on and build the car YOU want.Not what other people want.Both my Z cars have mild L28 but thats just me.Its expensive to get over 200hp out of them.Its very easy to see why a different motor that already has over 200 hp to start is a smart choice.Now if thats in a small shorter package motor that will take the understeer out of the nose Even better. I do suggest to send them the motor of your choice with a matching gearbox , for them to keep as a future option if all else fails.

[@brucekirk5386]

Most reliable engine company on the planet even thier motorcycles are the longest lasting iv been building cafe and bobbers out of Honda/Suzuki bikes for 25 years

[@MYPIG13]

where did you buy the carbon skins/ quarters?

[@markalmelo]

More video's Please! A datsun is still on my future car list amazing looking car, and this project is insane!

[@leefhead1]

hes using the grinder wrong, thats why hes having such a hard time cutting that panel off. Everything else looks amazing though!

[@RenatosilvaMinis-Games]

Muito top o progeto

[@dawg630]

Sheeesh, cool stuff! Cheers from Russia!~

[@aaronlehman9549]

Wear gloves please you do not know how much stress that gives me.

[@StreetBandito]

Lol we started recently it gets better.

[@ideabrickworks9043]

Worried about you dude, cutting metal with no eye protection! Found you from the FE40 project (awesome) and now binging this project to catch up. I will be working on my daughters kitchen in Silver Spring in June…do you allow visitors? I would love to see your work!

[@crispycris]

Again, making everything look so easy. Besides that, that place is huge! Luxury garage is what it should be called. Or Heavenly Garage.

[@crispycris]

Amazing. Lucky guys. Can understand why you are always in such a fresh vibe when making these videos cause the action is da bomb.

[@houseofno]

Maybe you didn't notice but this "luxury garage" has a roof leak that leaked water on the car. Otherwise nice car. Not into the s2000 motor. It's not a bad little engine but you have to rev the little buzzbomb to a "million" rpms to get any power out of it. Torque is not a dirty word.

[@phantom5185]

So, how many layers per quarter panel? 3-layers? I seen the first... And what was Tim's email? I'd like to show him my car, and what I've done.

[@phantom5185]

Is there more footage you took of Tim cutting out the quarter panels? That you hadn't shown us on U Tube? [ Still waiting for Tim to reply to my sent IG to him. ] (I really don't need to cut out the whole quarter panel cause the lower portion an area is blistering of undersurface rusting. This is why I'm choosing on cutting out the whole quarters on the car, as Tim di here.) This is why I'd like to show Tim pics of my car, and since he does this work for a living, I want to get his opinion, to resolve the problem I'm faced with.

[@stuntdrvr]

maybe im wrong but when you lay carbon over the rear Quarters... you just have a mold... female piece...???

[@djsonicc]

Wait, so you guys used the actual quarter panel as the mold for CF fender? Just lay CF over it, remove, then reinforce with additional sheets?

[@mustangboss1246]

Millennials.... take a good steel body... make a plastic mould then cut the wielded on sheet metal pannels.... then glue on pannels... just because you glued everything in elementary school does not mean it applies to cars...

[@lonedct8r817]

Where is this shop? I have an E60 5 series I would like some carbon fiber on. Nobody has pre made pieces.

[@JonHowes1]

Man...just found your channel. Watched 3 episodes of your carbon work. You just earned a new subscriber! Amazing work thusfar...now for the rest of the series :P

[@fns58]

Goddamn that guy at 3:56 and on, grabbing and moving his bare hands so close to the freshly cut aluminum made me clench hard. Buy that man a pair of mechanix! Other than that lovely project you have there, a lot of love being put on as such beauty deserves. You gained a new sub, regards from Spain!

[@shannonflanders-lyonnais6367]

That's mild steel...

[@danikael2815]

Man you keep calling things by the wrong name like a quarter panel is not a flare!!! So far in all the episodes youve done it.

[@dgfabrication4987]

So is the quarter panel you made slightly bigger than factory as its just a mould of the ourside skin ? Thanks

[@AmenIamHotepRA]

*Where in the US can you find a program that teaches you how to do what you guys are doing?*

[@fiercenet]

kzbin.info/www/bejne/iZOxn3ecjdmHm68 When your cutoff wheel gets real low... but you think you can make it all the way!

[@MrTBiz-ki3bl]

Where'd you get all them carbon fiber parts from? What's the website?

[@brianluck84]

The production value from episode 1 to now is phenomenal. Keep it up

[@amanteapasionado6836]

My grandpal used to have a 240z with a super charged corvette motor and side pipes on it when i was little in the mid 80s. The front would come up off the ground a little when you would mash on it. It was so mean. My uncle wrecked it. Well he didnt but he had it at his girls house parked out front and someone smashed into the back and totaled it while it was parked.

[@amanteapasionado6836]

He had a picture of him standing behind it with a rag acting like he was crying lol

[@SJ-wr5yg]

your definitely about to blow up bro! Your videos are crazy good, cant wait to see you at the top

[@danieloleary4682]

what supplier do you guys use for your carbon. Im looking to do a little carbon work to my 84 volvo 242, any point in the right direction for a quality carbon fiber supplier would be greatly appreciated, Thanks, Dan. Subd btw great work !

[@danieloleary4682]

oh didnt see that thank you !!

[@PhillipTieuChainz]

Whats the name of the business or website so I can price out the carbon fiber body panels?

[@TheLoydal]

Killer build. And you are doing a good job on the videos. It's all good!

[@dylonparsons2197]

I wanna know, Did you use the body as the mold? And what did you use as a mold release?

[@adamdove7264]

The sickest 240z build ever. damn i cant wait to see thing at H20i

[@jaimecogollok4855]

cada vez que veo al negrito...lo adelanto! pura farandula!

[@thewrongredneck2086]

this will also work to make fiberglass body parts as well correct?

[@Francisco_Garcia14]

I'd really really like to rep street bandito stuff where can I get some merch?

[@Francisco_Garcia14]

alright sounds good omw to buy me some merch keep up the good work I enjoy the videos a lot

[@leb274]

The name of the background music please.

[@phantom5185]

The more I watch these, the more excited I am getting to jump into forming my new quarter panels. I've accepted, the quarter panel driver side needs to be replaced, but I'm not paying Chrysler $3,800.00 plus if they find other issues behind which will increase $3,800.00 fuck that. Their max cost isn't anything above $3,000.00. I have an estimate too remove both quarter panel, replace with brand new, $6,800.00. I will be disappointed after I place masking tape, as Tim did to this care quarter panel indicating the 1-inch that will be left and the remainder will be removed. Once I start cutting, there isn't anyway of going back or backing out of it. I've been seaching, for the Carbon Fiber before taxes for measurements of 3ft by 5ft which is 1-meter by 50-inches for $41.50 per is a great cost. [ And it's in Canada. ] I've seen cost at over $50.00 per Just searching for a small grinder, as Tim used. I do have too small hand grinder 5-inch but the disks are to big.

[@sergiopacheco3180]

Sexy lookin ITBs!!!

[@Generalusuer]

Wait so did he make a mold or did he just put carbon on the rear quarter and it fit?

[@MindDezign]

Hey Tim I did a bandito skin job on my 240Z dash , to put in my 280. It pulled off in one peice , like I thought it would ( because the stock dash was vacuum formed from the manufacturer ), but Im going to vacuum bag red/black carbon/ kevlar over the fiber glass To get the look I wanted. But this is to let you and others here know it will pop off in one complete part No two or multi part mold needed!!

[@HotGritz910]

Only thing I don't like is the engine, but hey it's going to be light.

[@BryanCarter4130]

Been following this build, seriously insane work. Would love if you started producing some carbon 240z parts. I have a 71 thats getting a 4.8 LS with some serious boost

[@tonystarkdlt]

So how many layers total did you do for the shell?

[@Dug6666666]

More work up front , but wouldn't it be better to make reverse molds off the car and pop part panels from them. A- to have something to go back to if a panel needs replacing. B- you could sell carbon panels on and recoup the labor costs.

[@jameshowey7102]

How much would a project like this cost? Just the carbon fiber bits.

[@jameshowey7102]

Street Bandito what website was it ordered from? I'd like to not get cheap shit

[@Birken87]

Looking real good. How are you guys going to fasten the carbon parts to the frame?

[@Birken87]

Street Bandito yeah, I've seen that. And that was why I asked. I was thinking about the alignment since the door sides are fastened at the original place, but the fenders and everything will be on top of the OEM panels.

[@rubberducky243]

Why don't you have more subs your camera work is amazing

[@saschagoretzki5504]

Nice to see youre work step by step and HAPPY BIRTHDAY BRO!!!!!!!🤗🤗🤗

[@trash08]

I got so sad when i saw a fucking honda motor in that shit.

[@Xfacehack]

This is sooooooo cool! Have thought about how people carbon fiber convert "regular" cars but never seen an video. Awesome! SUBBED!

[@massacre2231]

Are the body panels single layer?

[@sgsuck109]

at what shop is this?

[@NIVO1972]

best thing that could happen to the ole girl. Yanking that damned Honda crap out of the Datsun. Made me smile

[@brandonuribe9552]

I hella love your build man been following you since 800ish subscriber. How about a follow before your work gets even bigger??? :0

[@michaelrouth5612]

sweet build subbed thing is going to be sick when its done

[@BuildThreadsNorway]

Everything about that car looks so good!! The narative is super smooth and relaxing as well! Now I just have to back to watch the previous episodes.

[@4rombaku]

Hey guz, Great series! Good luck and keep posting! I'm sure this question been asked bfroe but anyways why you putting Honda in Datsun? Nissan has great engines to start with.

[@derickcriswell1477]

After watching you guys do this carbon fiber I'm almost willing to do the same and get rid of the fiber glass

[@harleyhewson3806]

Have you guys done a hatch by chance

[@alfredo_jr7914]

yo what kind of glasses or frame are those?

[@alfredo_jr7914]

Street Bandito hell ya you mean "Glasses Shop"

[@Stavo1420]

Love the car alot but me as a Nissan and Datsun fan just can't take the idea of a S2000 motor being up into it, he needs to get a SR20 or a RB20 or 25, something like that because it just feel like I saw something I shouldn't have. Hope he does change the engine but I am new to the channel and all so hope to see some more great builds, Happy B-day man.

[@Stavo1420]

Street Bandito If basically free than I guess you work with what you got but as far as the S2000 engine being great, I know that for sure, a bigger 4 banger making about 235ish HP is damn good and the engine is reliable too just you know new to the channel so their are some thing I don't know about the build and it just hurts a little to see a Honda engine go into a bad ass Datsun.

[@racketman2u]

Yeah, you can't beat the sound and smoothness of a six, but good to see a Z being rebuilt anyway, and maybe one day it'll get a proper engine.

[@laurieagnew6706]

F20c is a far better piece of engineering than any rb. Now jz would be a different story

[@sabz_bhp]

Love the car the channel BUT.. just not down with a f20 in a classic datsun.. agree with the comment about a sr or an rb or even a v series engine would suit the cars personality.. not knocking the f20 one bit. No denying it’s an amazing engine but gotta keep it pure!! Either way keep it up.

[@scottb6430]

I agree, Honda in a 240z not cool. Different but not cool. Put a new generation skyline motor be bad ass. Out of budget I'm sure but be bad ass. At least a 4g63 be better

[@derickcriswell1477]

I'm working on putting a twin turbo vort tech v6 engine and trans in her with the all the computer mods

[@CalMUK91]

When you took the engine out on the lift all I was thinking is, I hope to god the back of the car isn't too heavy and it pivots and falls!

[@Zisch4Bumm]

Crap i accidently deleted my comment😂 so i will do again: Nice Video! I enjoyed watching it! Keep up the great work :)

[@Zisch4Bumm]

Street Bandito Haha LOL no problem mate ^^

[@marvinprietos3141]

how much does the car weight?

[@drkessel8289]

Happy Belated BDay!

[@xmgoblinkanal1599]

lotus 6:52 its very light

[@emiezzero8113]

What rims are those ???

[@pyramidacid]

Happy Birthday Yo! Keep it up! Carbon panels are starting to look mega legit

[@JDMovation]

Just watched a few episodes not knowing what motor you went with for this build. When I seen the f series motor in there I instantly fell in love!

[@CrazyBanjoKazooie]

this is the sickest thing ive ever seen!!! and its not even done yet lmao

[@charlesparker8452]

Lookin gooit. Happy B day from T City washington

[@ChutneyInc.]

I just subbed this morning thought i was going to have to wait for ever for more of this eyeball food!

[@GRPLiningServices]

Thoroughly enjoying this build. Brilliant car and modern materials is a win. Lovely camera work too.

[@spookyintentions989]

high af in the end lol

[@simplelife1741]

Big ass shop mbn

[@thriceguys]

that carbon looks so good on the car. As always great work on both the carbon fiber parts and the camera skills and editing.

[@jjaeks5518]

Really gnarly build, guy is super talented too, and great footage/editing.

[@ofadetergentsud]

48 years old?! Wow! This is such a timeless body style.

[@carlosleandry12]

fist vid and stopped watching when i saw a K series in the 240z

[@jackiea2148]

yo

[@BossAuto_]

How did you pop the carbon panel off the quarter

[@schnecks2180]

What a way to spend a birthday-- Knee deep in Datsun :-)

[@nic_actual]

Content: yes... Homeboy 'presenter': Nah

[@sprydo7113]

It's a Hot*Sun...F-series "interesting to note"

[@Z32orDIe]

Happy bday brotha! Congrats on leveling up, subbed for sure. Love the datsuns!

[@TreyHerrera]

Love the filming! What camera you use?

[@akraftw3rkorange]

awesome, how are you stabilizing your handheld footage? great work btw

[@MitchellGuyon]

Why not just make the fender flares as wide as the tires?

[@abdulnasserlawi7619]

Can you tell us why Vtec? Why not rb engines

[@DalanarTV]

He could try felt for sound dampening in the wheel wells

[@ChevyFtWss]

dudes wearing two jackets when other dude has a t on.

[@milesduke8920]

Up guys own honestly the best channel I've seen for a while, keep it up the best is yet to come 👌🏽👊🏽👊🏽

[@madmen2505]

all the best bday wishes from berlin city

[@scooter1261]

Keepin it real man. Lovin it. Keep the updates comin 😋. Happy bday man!!!!

[@antinoir472]

Just found this channel ! You guys do slick work I’m subbed and watching !!

[@derickcriswell1477]

This is inspiring me to work on my 260z

[@thebowtieguy777]

I plan on doing some of this stuff to my 79 pinto

[@blueridermg]

Only 1:31 into video and not a subscriber yet :) I can see why you love pizza lol sure looks good

[@scottl3739]

Awesome work fellas !!!!!

[@jessie38supercharged]

Honda though?