How to Program a 2005 Ford F-150 Chip Key When You Only Have 1 Original Key

  Рет қаралды 80,848

striker1211

striker1211

Күн бұрын

This will work for 2004 (not Heritage), 2005, 2006, 2007, and 2008 models. Newer models may be the same but I haven't researched those.
*Requires Windows Laptop... or a desktop and an extension cord :)
Step 1: Buy Transponder Keys and USB OBD2 Tool online
Step 2: Get keys cut at Home Depot, ACE Hardware, or Local Locksmith
Step 3: Install forscan and program the keys
eBay Keys from Seller: keylessremotesforless (not a sponsor)
www.ebay.com/i...
VINT-TT55502 OBD2 USB Dongle from Amazon (not a sponsor):
www.amazon.com...
How program a spare with only one original key

Пікірлер: 131
@scomi
@scomi Жыл бұрын
Amazing job on this video. The process went a little differently than you described, but you got me close enough that it was simple enough to figure out .Probably the highest value video I've ever seen on KZbin. You saved me a ton of money. I really appreciate the information. I spent just over $20 on a key, a fob, and the OBDII USB cable. My local Lowe's cut the key at no charge, since the guy told me you pay for the key not the cutting. As a bonus, the FOR Scan software, that I didn't even know was available to the public, helped me diagnose the AC problem on my other truck. I searched for hours and your video was the only video I found that helped me out. Way to go. Keep up the great work!
@blueheronhomeinspections7295
@blueheronhomeinspections7295 4 жыл бұрын
Many thanks! Much, much appreciated. Followed instructions and all went well. Ford dealer cut my keys for $5/key, very much surprised but happy! I thought they charged $5 just to breath in dealership.
@juanpena9386
@juanpena9386 3 жыл бұрын
My F150 came with just one key. You helped me a lot. Now I have 3 working keys. Thank you.
@justz00t48
@justz00t48 Жыл бұрын
Worked great for my 2006 and 2011 F150. On the 2011 it prompted to insert the new key before the 12 minute wait but still worked fine.
@scomi
@scomi Жыл бұрын
That's the same way it worked for me on my '08 F250
@vwsportruck3427
@vwsportruck3427 Жыл бұрын
This absolutely did the trick for my son's 2006 F150! Thanks 😃
@kevinmackechnie3165
@kevinmackechnie3165 3 жыл бұрын
Followed your video with my 2014 Ford 150 FX4 and worked like a charm. After programming the key I only needed to turn it Off/0n 8 times in the ignition to program the remote buttons. Thanks a lot!
@maxscozia
@maxscozia 2 жыл бұрын
Ok I figured it out finally... I definitely stumbled cause of the windows 10 issues with this procedure. Thx! For all ur help and thanks to all the guys on the forum...all their experiences let me piece everything together.. Took me 7 hours or reading every post on the forum... but it’s done ✅
@ParadiseisYoursNow
@ParadiseisYoursNow 2 жыл бұрын
Worked perfectly with my 2005 Escape. HomeDepot cut my blanks for free too! Thank you for this vid!
@justinfoster2882
@justinfoster2882 2 жыл бұрын
Many thanks to you (and your commentors) for saving us money and time. Worked perfectly on the first attempt for 2 fully functioning keys. Thanks!
@Hugh_Manitee
@Hugh_Manitee Жыл бұрын
Leave it to a young man to figure a way around paying a locksmith or dealer hundreds of dollars. Bravo! I'll have to try this.
@vincentleuga8135
@vincentleuga8135 2 ай бұрын
Did the trick for my Ford Mustang 2013. Thank you so much !
@theot3625
@theot3625 2 жыл бұрын
Worked First Time... Ford F150. Thanks a bunch Striker you saved me over $100...
@vArAnOsUpEr
@vArAnOsUpEr 3 жыл бұрын
Thank you so much! I was able to program my extra key without having any problems.
@randytrashcan
@randytrashcan 2 жыл бұрын
Great stuff! A few instructions in the tutorial have changed, but it’s pretty straightforward. The program now needs to be downloaded and installed first. You’ll click the bottom left button once the program starts up, and it will give you the ID. You’ll then create an account and register that ID. Bought a key on eBay for $10, an OBDII tool for another $10, took the key to ACE and they cut it for free. $20. Sure as hell beats the dealership wanting $200.
@striker1211
@striker1211 2 жыл бұрын
Yeah it's funny because if the dealership was reasonable they could charge $30 a key and people would pay it.
@justz00t48
@justz00t48 Жыл бұрын
You are lucky getting some one to cut one so easily. I went to through 4 different places before I could get some to just cut the key. Most places just refuse to do it for you.
@AntoineFinch
@AntoineFinch 3 жыл бұрын
Hey you're the man just finished making 2 keys for my wife's explorer THANKS A MILLION it works just follow your steps!
@OldUncleZeb
@OldUncleZeb Жыл бұрын
I just did this today. I used a similar ELM 327. I also went to Home Depot with some blanks I brought in, and they cut it for free using the “old machine” they had. I have new 2 keys and only spent $40!
@striker1211
@striker1211 Жыл бұрын
Glad to hear it still works. Thanks for watching.
@jeffc42024
@jeffc42024 Жыл бұрын
wanna give ya a big shout out cause this saved me i had one half broken key an dealer wanted an absurd amount to make another key this got me 2keys an 2 fobs for under 50 bucks ! again thank you for this video great job with the tutorial
@Orange-kl3zu
@Orange-kl3zu 3 жыл бұрын
I have a 2010 Ford F-150 and it worked like a charm Thanks I have three keys for around 30.00
@earlt911
@earlt911 10 ай бұрын
I'm guessing that this same procedure will work for a 2008 Ford Escape? Thanks for the video - you are awesome!!😁
@alain.r
@alain.r Жыл бұрын
Worked on 2003 Lincoln Navigator, thank you!
@zaidlaffta
@zaidlaffta 3 жыл бұрын
Just got me 3 keys using this viedo. Thanks alot.
@Megalocade
@Megalocade 3 жыл бұрын
Very helpful thank you, want to do this to my 2008 Mazda 2, I bought a v1.4 Elm 327 500k wired adaptor with hi-can switch years ago but never needed to use it on my old Mazda 3 but my new Mazda 2 only had 1 none remote key when I bought it, FORscan connects to my car and shows pats programing and currently have 2 keys stored, I have a lot more options for pats showing on my FORscan but it is showing "program ign key" which is what I need as I ain't erasing keys so will use that as soon a my new oem keys come.
@WallyJ2K
@WallyJ2K Жыл бұрын
Worked on my 2006 Ford F-150 Supercrew. Thanks!!
@waleye262
@waleye262 8 ай бұрын
This worked great on my 2008 F150!
@matthewlizalde9040
@matthewlizalde9040 3 жыл бұрын
dealership quoted me $145 this costed me $40 dollars Hell Yeah thanks for showing me your ways
@tonys6464
@tonys6464 3 жыл бұрын
Well done! Concise explanation of useful information. Thanks for your effort!
@Theferg1
@Theferg1 3 жыл бұрын
I’m going to order the obd device now and give this a shot on my 2009 mustang and hopefully it will program my Oh eBay keys.. lol. I will update in a couple of days!!
@gw5309
@gw5309 3 жыл бұрын
Billy - how’d it go?
@NewLatitudeGlobal
@NewLatitudeGlobal 3 жыл бұрын
Awesome video. Worked spot on! Thank-you!
@rchamb70
@rchamb70 2 жыл бұрын
This video was incredibly helpful! I just had success with 2 new keys from Amazon. One thing was tripping me up that I want to comment about that may help others: The dialog that pops up at 9:49 about counter of programmed keys. I was doing like you and just clicking ok hoping that the count would increase - it didn't, and I tried a bunch of times with both new keys. It was hard to tell exactly what the dialog was telling you to try, so I did this: After the dialog pops up, leave it open. Then, turn the key in the ignition to Off, wait a few seconds and then turn it back to On. Then click ok on the dialog box. Boom! That increased the key counter for me. Worked for both of my new keys! I hope that helps someone. Also, as much as it seems like you should, don't enable unlimited keys. That made programming fail. Thanks a lot for this, bro!!
@juanpena9386
@juanpena9386 Жыл бұрын
Went to the home Depot in Kerrville TX, hoping to get my new keys cut. The one neanderthal I dealt with acted like I was stealing a car 😂. I'll just buy my own machine.
@striker1211
@striker1211 Жыл бұрын
Yeah Home Depot is a gamble. A locksmith can cut the keys but then they have their own issues because they often offer these same programming services.
@juanpena9386
@juanpena9386 Жыл бұрын
@@striker1211 Exactly. Me, I won't charge for my work. There's enough greed out there.
@Manmodor007
@Manmodor007 2 жыл бұрын
Great video, thanks for the help!
@wildbill23c
@wildbill23c Жыл бұрын
I figured if you put one of those keys in the ignition without it being programmed to the vehicle it would set off the alarm. You don't need to subscribe to the Forscan Forum in order to get the software.... however, you do need a key in order to access these higher level features of the software....the alternative is to pay a $12 annual subscription to program keys, fobs, etc. Although, $12/yr is cheap considering all you can do with the software. I'm gonna have to do this on my 2005 Ford Taurus because it only has 1 key, and to my knowledge doesn't have remote keyless entry but I don't think there's any way to find that out, but don't care if it does or not honestly, it runs/drives and gets me around, I just feel better having a spare key in case I lock my key in it LOL...not that I've ever done that before...yeah right LOL. Supposedly you can program a key without the software by simply putting the unprogrammed key in the ignition, turning it on and letting it set for about 10 minutes, then turn off the key, then back on and repeat the ignition on for 10 minutes process, turn off the ignition, remove the key, reinsert the key, and it should start...gonna try that first to see if it works, otherwise I'll go to the ole Forscan software LOL. Figured what the heck, got the car, needs a 2nd key, may as well experiement LOL.
@pheonephone9407
@pheonephone9407 Жыл бұрын
Did this work?
@RonBme
@RonBme 3 жыл бұрын
Homedepot can cut the keys u bring in the problem is they cant charge u for ur own property so they say they cant cut them. I've had 2 keys cut in the past 2yrs
@itsmeray01
@itsmeray01 9 ай бұрын
Great video , Thanks. 3 years later ,,, How is the truck runnung? I noticed a momentary ticking in your engine when you started it .. the notorious symptom that you need a timming chain job.
@striker1211
@striker1211 9 ай бұрын
I got rid of it a few months ago. The frame was rusted and the floors rotted away. It ticked the whole 7 years I owned it. Rust took it before mechanical failure.
@DingoBZR
@DingoBZR 4 жыл бұрын
Great video! Thank you so much for sharing this!
@user-co2uc4ng9p
@user-co2uc4ng9p Жыл бұрын
This is a very good video. I was able able to program one key without any problems. The second key will not program even when using either the original key or the newly programmed key. Any help / suggestions would be greatly appreciated.
@FranksShitBoxCollection
@FranksShitBoxCollection Жыл бұрын
If it's just a cheap eBay/Amazon special key then odds are that you got a bad key.
@AntoineFinch
@AntoineFinch 3 жыл бұрын
lowe's won't cut keys bought from someone else! they want 75.00 for a key for a 2005 explorer! columbus, ga 08/2021
@scottsterba
@scottsterba 3 жыл бұрын
Great video. Followed it and it worked perfectly for me. Thanks!
@zumajax
@zumajax 3 жыл бұрын
Where did you get the keys?
@TheyCallMeMud
@TheyCallMeMud Жыл бұрын
Wait so you have to register And then wait for approval to make a key that will actually start the car. Also was not aware that the key would turn but not start a car like that. Thanks for the education
@christychaves9518
@christychaves9518 4 жыл бұрын
Worked perfectly!!! Thank you.
@donvanhuss2706
@donvanhuss2706 2 ай бұрын
need some kind of invitation code to register for the Forum any suggestions
@randalllee2293
@randalllee2293 4 жыл бұрын
Thank you. I duplicate a key base on your video.
@anthonyaguilar6978
@anthonyaguilar6978 4 жыл бұрын
Great video
@caseybrehm1242
@caseybrehm1242 2 жыл бұрын
That video of your 5.4 sounds like it is about to die... This video being so old, I'm sure it did die.
@striker1211
@striker1211 2 жыл бұрын
Nope, still running fine.
@biliards2002
@biliards2002 3 жыл бұрын
Good man ! Smart . Thank you
@bryonwhitmire6658
@bryonwhitmire6658 Ай бұрын
How do i get a invitation code? Wont let me register...
@tombowlen4264
@tombowlen4264 2 жыл бұрын
Thanks I'm going to do this tomorrow when my keys come in and I get them cut just wanted to know what's the best way to unplug everything when done programming
@striker1211
@striker1211 2 жыл бұрын
Once the success message pops up from the program you can just unplug it.
@tombowlen4264
@tombowlen4264 2 жыл бұрын
@@striker1211 thanks very much just wanted to make sure because one person said if you just unplug it it could brick the computer while the program is on
@rickrucker5042
@rickrucker5042 Жыл бұрын
Where do i get the Hardware ID number on 2006 F-150 ?
@lon602
@lon602 9 ай бұрын
Will this work to change to remote headed keys?
@qrs3658
@qrs3658 4 жыл бұрын
hi, this is some really good info. Can this program work on other vehicles such as BMW, Mercedes and Audi? Also is there any other way to program a key using a duplicate?
@Megalocade
@Megalocade 3 жыл бұрын
This will only work if the car uses fords pats system, FORscan is designed for Ford, Mazda, Lincoln and Mercury vehicles.
@carparking9644
@carparking9644 Ай бұрын
This is how to program a key for a Ford Escape 2009?
@natehill8069
@natehill8069 Жыл бұрын
So these are transponder keys?
@paulricharddeguzman6753
@paulricharddeguzman6753 2 жыл бұрын
Will this work for 2000 F150 XLT? I tried programming my remote and it won't go into program mode. And I only have one Key also so I was wondering if this will work for my 2000' F150???
@guerradan1958
@guerradan1958 2 жыл бұрын
They don’t cut keys since they don’t have a code for the key. So I both two blanks problem resolved
@bobflowers2150
@bobflowers2150 3 жыл бұрын
Great video. Can you explain why this will not work on the 2004 Heritage, which is what I have.
@striker1211
@striker1211 3 жыл бұрын
The heritage is just a 2003 that they rebadged for a half year run in 04. You'll need to follow instructions for a 2003 with the older key system.
@maxscozia
@maxscozia 2 жыл бұрын
Will I need the laptop connected to the internet while in the car executing the PATS programming? Everything is all preinstalled and ready just like u do in ur video.. all downloads and installs complete... Don’t think I need internet access while programming but want to make sure and ask..
@striker1211
@striker1211 2 жыл бұрын
It doesn't download anything to work, but you may need to connect periodically due to the license validation of the software.
@kevinmackechnie3165
@kevinmackechnie3165 3 жыл бұрын
Will this method work on a 2014 Ford F150 FX4?
@johndouglasdahl
@johndouglasdahl Жыл бұрын
12 min of chatter what was all the talk about downloading ? when did the blank fobs get programmed ? did you or the unknown blue device actually program the blank (new) fobs ? what was the point of joining some …… online organization ? why downloading (software ?) was it for the blue device ? was the blue device electronically connected to the truck computer somehow ? could / did the blue box automatically activate several fobs in “ seconds ” ? to much detail for what purpose ? i'm still confused abt what i watched and what happened
@RobertDickens2002
@RobertDickens2002 Жыл бұрын
Would this work for 02 mustang
@kuehnel16
@kuehnel16 Жыл бұрын
So what do I do if I don't have a master key
@scomi
@scomi Жыл бұрын
There are a few other options in the FOR Scan software under the PATS programing. I'm sure one of them applies to creating all new keys. I'd do more research and be sure before you start playing around there.
@armdelgado
@armdelgado Жыл бұрын
this can work for a ford explorer sport trac 2001?, thank you for your respond.
@striker1211
@striker1211 Жыл бұрын
I believe the 2001 has a different type of key with its own procedure.
@wgr1515
@wgr1515 Жыл бұрын
How I can register without invitation code.
@allonna1
@allonna1 Жыл бұрын
is this forscan programing possible with Veepeak OBD2+. if so could use some serious help lol
@striker1211
@striker1211 Жыл бұрын
I'm not familiar with that adapter, I'm unsure if it supports hs-can mode. I would contact their support and verify. You could always try it and if it doesn't support it forscan will tell you.
@lowbornfabrication
@lowbornfabrication Жыл бұрын
Sounds like your 3V needs cam followers and timing kit.
@striker1211
@striker1211 Жыл бұрын
Haha probably. Sadly it'll meet the scrap yard before it sees a mechanic. Frame rust is taking it.
@6Saturdays
@6Saturdays 2 жыл бұрын
It's asking for a confirmation of Registration Do you have an invitation code?
@maxscozia
@maxscozia 2 жыл бұрын
I keep getting “no adapter found. Check connection and try again” Everything is plugged in properly, WiFi is connected. My driver install didn’t come from the “setup.exe” like urs but I did get that window for install, uninstall, and it said the drivers were installed with success. Switch is on hs... What am I doing wrong?
@striker1211
@striker1211 2 жыл бұрын
Open device manager from start menu and look for the adapter in the list of devices. See if there is an exclamation point next to it. If so, right click on it and hit properties. It will show an error code on that screen.
@tombowlen4264
@tombowlen4264 2 жыл бұрын
So I went to home depot to get my blanks cut they said "we can't cut keys that are not from inside the store
@pheonephone9407
@pheonephone9407 Жыл бұрын
I can't get the program to open. Please offer any tips. Its asking me to pay for a program to open it. Seems scammy...
@scomi
@scomi Жыл бұрын
He covers that in the first part of the video, about the free 2-month license. It only takes about 10 minutes to get your license key.
@hilarioromero5942
@hilarioromero5942 6 ай бұрын
Will this wonk on my f150 2011?
@hilarioromero5942
@hilarioromero5942 6 ай бұрын
Tried programming it 4 times but keep getting pat programming failed
@LexxusRoberts
@LexxusRoberts 2 жыл бұрын
Why am i struggling to find my PCM number ? :(
@marinodejesus8024
@marinodejesus8024 3 жыл бұрын
Hey, I'm stuck at the part where I have to install the Driver into the system. I go into the setup properties but nothing happens. What am I doing wrong?
@striker1211
@striker1211 3 жыл бұрын
If it's not loading the file properties, and you've extracted the file as shown in the video, something on your windows install may be corrupted. Do file properties open for any file type? You can actually skip the step of checking the digital signature if you are 100% sure you are downloading the driver from the manufacturers website.
@marinodejesus8024
@marinodejesus8024 3 жыл бұрын
@@striker1211 Thanks Striker. I did as you said just downloaded it directly. It said it had already been pre-downloaded, so that is probably why.
@ateeqafzal4444
@ateeqafzal4444 Жыл бұрын
Will this work on a 2011 ford ranger
@striker1211
@striker1211 Жыл бұрын
Nope sorry
@amyb9077
@amyb9077 2 жыл бұрын
My laptop won’t save the key file. Anyone have that problem?
@justz00t48
@justz00t48 Жыл бұрын
The date and time must be correct for the key file to work.
@Delorean_Guy
@Delorean_Guy 2 жыл бұрын
Would this work on an older model 2001?
@striker1211
@striker1211 2 жыл бұрын
The keys are different on older models but there are other videos on youtube for 2001s
@jimstrongone
@jimstrongone 3 жыл бұрын
But great video
@AntoineFinch
@AntoineFinch 3 жыл бұрын
can you switch forscan from one PC to another PC or do you have to get another license ?
@striker1211
@striker1211 3 жыл бұрын
You'll have to request another license
@AntoineFinch
@AntoineFinch 3 жыл бұрын
@@striker1211 ok cool, DO YOU NEED THE ELMCONFIG _2.16c FILE TOO? i have vint-55502 model
@eray9934
@eray9934 Жыл бұрын
What if you lost all the chip keys that came with the vehicle? Now I only have nonchip duplicates I previously made for when I lock my keys in the car. Guess I’m fucked huh?
@striker1211
@striker1211 Жыл бұрын
It's been a while since I did this but I seem to remember that you needed at least one chipped key. Mobile locksmiths might have the tool to reprogram the computer and save you a tow though.
@scomi
@scomi Жыл бұрын
There are several options in the FOR Scan software under PATS. I'm sure one of them is for creating all new keys from nothing. You probably need to do more research before messing around in there.
@dhobbs1974
@dhobbs1974 3 жыл бұрын
Hey man when I get ready to install the driver, do I need to have the bbfly adapter connected to my laptop?
@striker1211
@striker1211 3 жыл бұрын
Either way will work. The installer just adds the driver to the windows Driver Store. Windows Plug and play framework takes care of the rest.
@dhobbs1974
@dhobbs1974 3 жыл бұрын
@@striker1211 Thanks for the help
@dhobbs1974
@dhobbs1974 3 жыл бұрын
@@striker1211 Hey man I have one more question, so I had to order a new PCM for my f150 and they did program it back to my original vin for the truck and they did tell me that I’m going to have to get the keys reprogrammed. So will this process that you’re doing here reprogram the keys to the new PCM?
@dhobbs1974
@dhobbs1974 3 жыл бұрын
@@striker1211 I got it fixed, you know the option where you can erase and program keys, that does work because I had to erase mine out of the Pats and reprogram all of them in order to get mine working.
@damightymo
@damightymo 3 жыл бұрын
I tried this but the programming failed when I put in the new key. Any idea how I can figure why it failed?
@dorothysmith1882
@dorothysmith1882 Жыл бұрын
When do I get the invitation code ? I’m stuck here
@pheonephone9407
@pheonephone9407 Жыл бұрын
Me too. Did you figure it out?
@dorothysmith1882
@dorothysmith1882 Жыл бұрын
@@pheonephone9407 i gave up nd went nd had 2 programmed 250.00
@buffchipz7523
@buffchipz7523 3 жыл бұрын
I just bought a 2010 fusion do I need 2 keys or 1 key to program it
@ctoomuch
@ctoomuch Жыл бұрын
Followed your instructions but it didn't work for my 2003 F150 Harley Davidson. After searching I came across this video: kzbin.info/www/bejne/bWPOg36Mi5WUgJI which showed me that for the older trucks you have to erase all keys and then program the 2 you have (including the one original that works). Just wanted to let people know that your way works for the 2005 models but it's different for the older trucks. Thank you for the video and information!
@MowersNBlowers
@MowersNBlowers Жыл бұрын
Or you can just buy a Tom’s key
@jimstrongone
@jimstrongone 3 жыл бұрын
Truck sounds horrible....
@unblindswordzman96
@unblindswordzman96 3 жыл бұрын
Lol 😂
@HondaCivic2001
@HondaCivic2001 6 ай бұрын
Do the new keys have to be with the ford logo to work because the keys I got from Amazon don’t work
@striker1211
@striker1211 6 ай бұрын
Mine were aftermarket with the Ford logo. The quality on these keys varies wildly.
@HondaCivic2001
@HondaCivic2001 6 ай бұрын
@@striker1211 Thank you for responding to my question and I hope that I can figure out what you are talking about on this video when I get the OBD device I ordered thank you again
Forscan 101 what is it how to begin where to buy how to start tutorial basics
14:13
The CUTEST flower girl on YouTube (2019-2024)
00:10
Hungry FAM
Рет қаралды 41 МЛН
Gli occhiali da sole non mi hanno coperto! 😎
00:13
Senza Limiti
Рет қаралды 24 МЛН
5 THINGS YOU DID NOT KNOW ABOUT YOUR 2004-2008 F-150
6:05
Jay Thompson
Рет қаралды 379 М.
How to make a cheap transponder key bypass
11:55
Lessco Electronics
Рет қаралды 1,2 МЛН
Ford Trucks Hidden Feature You Didn't Know About
6:42
GK7 Garage
Рет қаралды 1,8 МЛН
2001 Ford F150 Making and Programming a Key
5:50
The Working Locksmiths
Рет қаралды 13 М.
750HP 2024 F-150 Sleeper. Under 50K With Warranty!
15:30
Performance On Wheels
Рет қаралды 304 М.
99-04 Mustang PATS Key Programming using ForScan
11:57
Mustang5L5
Рет қаралды 3,9 М.
Hacking Ford Sync 3 🔓⚡
7:42
NaviUpgrade
Рет қаралды 222 М.
Ford Quick Tips: #48 How To Erase All Known Working PATS Keys
4:11
FordTechMakuloco
Рет қаралды 287 М.
The CUTEST flower girl on YouTube (2019-2024)
00:10
Hungry FAM
Рет қаралды 41 МЛН