Stripping Royal Enfield for hard tail frame

[@timlindgren8264]

Ha ha, the look on your face when you slid the frame over the motor and then said “it’s going to well” was great! 👍

[@clientcentredlearning]

Great to hear you are feeling more “normal”

[@TheOldaz1]

Glad you're feeling better, that 350 went together well - and so it should with your experience. Thanks Craig.

[@mikewynne6549]

You're looking better and happier Craig, but don't go mad just yet 👍

[@andyc750]

good to see you getting back to normal Craig

[@anythingoldmechanical]

I believe this is the red bike.. The bike that i deserved to own, that would of been polished daily, whether it was used or not on that day, a RIDDEN as much as i could use her as long as the roads were dry. It literally, would of been my ultimate dream to have owned that gorgeous historic 350.

[@johnwebb6489]

Good to see you on the mend. You can tell you are feeling better 👍😀

[@acimbobby]

Great with the time lapse strip down. That's the first time I have seen a motorbike stripped. Keep improving LOL

[@markallen6543]

You need a nice big clock for the workshop wall.

[@valvegeek]

Fab 😁 - wish I was so productive - but the sun was out today which made me feel like doing something.

[@shaunholbrook2288]

great to see you up and running again !

[@andrewhartley8781]

You're starting to look like your old self again, well done. Hopefully you'll open the special sticker sales soon

[@TheOldRogue]

Great to hear you are feeling better, just don't push your self too much, thanks for sharing.

[@davesbikestouringandmuckin7759]

Great to see you back on it Craig

[@peterwall9896]

Nice to see you're all well and good.😎❤️

[@Thegarageartwerks]

Great to see you so well, so inspired and enthusiastic mate

[@pgebhard7072]

Great to see you feel a lot better again!

[@bigface139]

Loving the new time-lapse stuff

[@christrafford4819]

Great to see you enjoying shed life again.. looking forward to the builds..look after my Enfield

[@bruceharrison9798]

Nice to see you nearly back to normal m8

[@garysmith7581]

Yo Craig really well done 👍 for that, plus you seem a lot better kidda too, good on ya 🤸‍♀️🤸‍♂️, can’t picture what the bobbers going to look like, but al go by what you’ve made up so far, keep them vlogs coming. XX🤠🙏🌈🦋🌎

[@MrDixie951]

Great to see you back at it, fantastic content as usual 👍👍

[@mitchrozelle269]

Nice, go, go , go ! We just need to crack on with what we know and makes us feel good!

[@colsparky651]

Looking much better. Keep with it

[@blairguinea6811]

Your back for business Craig, I think you could run a marathon Sir

[@davidbaker3270]

so good to see you getting back to normality

[@silktvPDR1]

Great to see the progress, glad on the mend ... wish I could work that fast lol

[@srl9727]

Lookin' good, feelin' fine, well pretty near. And a whole new take on "painting" yourself into a corner!

[@kennethszpindor1723]

Great to hear your recovering is Tracy getting better to good to hear you getting frames and stuff done and seeing the green bike getting taken apart go for it Craig

[@THEDOGHOUSECUSTOMMOTORCYCLES]

Thank you Kenneth, Tracey is still struggling a bit but getting better.

[@HepcatHarley]

I wasn't ready

[@THEDOGHOUSECUSTOMMOTORCYCLES]

your really slacking old boy lol.

[@rickmason4189]

Like the blues tunes bud.

[@davesmith8568]

Good to see your back up to speed Craig, hope all the rest of the family are doing well. Looking forward to rest of the builds.

[@PRB1098]

I scanned the comments for his Lordship's post, but Lady Mandy must have locked him in the shed 😂

[@THEDOGHOUSECUSTOMMOTORCYCLES]

I think hes moved into the shed lol

[@erikeggenbakstad]

Glad to see you on your feet again and getting some work done, true sign you are getting better. Cheers!

[@garyyorke1080]

Went very well didn't it ... glad your well on ya way for recovery . Hope the family is heading the same . Not really that much to the Enfield when you strip it back to basics . Gonna enjoy watching this build Craig.

[@tonywilliamson1822]

You look and sound loads better.always listen to your inner voice, don't push it .

[@Ivan-gm7zb]

Great to see and hear your feeling loads better 👍

[@andrewbull3537]

What did you put in your tea !!!!,I've never seen anyone work so damned fast !!!!!😁😁😁😁😁👍

[@gzhutch8407]

Wow! You've really got a spring back in your step Craig! It's almost as if you've speeded up the video in parts. 🤣 Great to see you back on form pal.

[@RichieWilliams]

Great to hear that you're on the mend :)

[@shagun5836]

I wish you use indian black standard bullet gold line paint job with monograms one day.!!

[@Wooley689]

Good to see you going to it again. Question, ever given any thought to doing one of the Musket twin conversions?

[@paulfoster9279]

Glad your feeling better Craig. How's Tracey feeling?

[@mickmccarthy5897]

fair play great work

[@davidwhite9293]

Don't over do it young man

[@alancampbell1008]

The reason it went so well is because you ARE the Enfield hardtail king! 😂 Wonder how many more are looking for a Bullet...probably too late to ask if you'd consider building another rear end?

[@sriramnandakumar7414]

Great is there a way to buy from you... this hardtail with other bolt ons for engine mount ...

[@sidwainhouse]

Would you ever consider making a plunger frame? Top work as usual...

[@THEDOGHOUSECUSTOMMOTORCYCLES]

Thank you Sid. My head is bubbling with ideas all the time so good chance in the future.

[@sidwainhouse]

@@THEDOGHOUSECUSTOMMOTORCYCLES sorry Craig, I've just added more to your head to contemplate... 😂 Glad to see you're getting better mate.

[@iamthefatstig]

Cheers for the sub Big Boy xxx

[@martyncozens5654]

Question excuse my dimness on this, but when you hacksaw the original frame to bits then weld the new bit on the back. Is the reason for retaining the original front frame tube and steering head so you keep the original frame number, I'm assuming the frame number is on that front section of frame????. Pleased to see your on the mend take care.

[@twin40dave]

Another great watch , your defo gonna need a bigger shed mi lover 😘😉😀

[@THEDOGHOUSECUSTOMMOTORCYCLES]

definitely starting to struggle

[@twin40dave]

@@THEDOGHOUSECUSTOMMOTORCYCLES perhaps when you go on your travels, get the builders in , nice surprise for when you get back 😉

[@THEDOGHOUSECUSTOMMOTORCYCLES]

@@twin40dave It would be nice to get a proper workshop one day.

[@twin40dave]

@@THEDOGHOUSECUSTOMMOTORCYCLES I'm sure you will Craig your work and content and attitude is second to none , your channel is growing so it won't be long I bet , just hope you can find a place locally

[@THEDOGHOUSECUSTOMMOTORCYCLES]

@@twin40dave Thank you. I'll certainly keep working at it.

[@1924ab]

Hi Craig, where did you find that girder fork on the bike on the lift.

[@kevinscudamore2711]

Rome wasn’t built in a day 👍🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@stephengent9974]

Welcome back to the land of the living. You looked half-dead for a bit.

[@charliegutierrez8728]

Hey brotha what happen to the Ural build.

[@baylatron]

I would love to be able to do what you do 👍

[@THEDOGHOUSECUSTOMMOTORCYCLES]

You have amazing skills from what I have seen.

[@baylatron]

@@THEDOGHOUSECUSTOMMOTORCYCLES thanks mate means a lot your knowledge is next level and you have great ideas 💡 👍

[@frankiechristians7813]

GREAT!

[@michaelhayward7572]

Hi Craig, whats the stretch on these hardtails over a stock wheelbase? Tia, cheers.

[@kmat-TV]

How to get a piece sent to india ???? Love the frame mate

[@eddiemizen3703]

Nice and easy does it 😉

[@andrewbull3537]

Craig,what is the maximum size back tyre you can use in the enfield /hardtail frame ???? Thanks in advance chewy 👍👍,peace

[@THEDOGHOUSECUSTOMMOTORCYCLES]

Hi Andrew, the maximum I go is 400x19 you could certainly go a bit bigger but would be restricted with chain run, Ive never tried going bigger than a 400x19 as i like to keep the old vintage look.

[@andrewbull3537]

@@THEDOGHOUSECUSTOMMOTORCYCLES ,ok, thankyou for your quick answer to my question,.....now sit down and have a nice cup of tea and put your feet up and watch coronation street 😁😁😁😁,have a good evening.

[@cornishreptiles]

The hardtails that you make, are they longer than the standard swingarm setup?

[@timberlaneworkshop2402]

How many bikes do you reckon youve built on that old table?

[@Papa_Kilo]

Yet another great video. What would the maximum that you could stretch the frame?

[@THEDOGHOUSECUSTOMMOTORCYCLES]

Thank you Paul. The frame is approx 3.5" longer, any longer and i think it starts to look odd

[@LirycznyBandyta]

Hello. I am wondering whether you could supply me with one of your hardtail frame so I can use it for my bullet. I am in south of England. I would love to hear from you. Many thanks Raffa

[@johnkinnane547]

G'day Craig your looking good mate and just think you probably have antibodies to it now, I'm looking forward to following this build and watching the different stages it goes through. One question does the back tier stay the same width or is there enough room in the frame to use a bigger rim? Anyway mate good to see you take care John

[@THEDOGHOUSECUSTOMMOTORCYCLES]

Thank you John, You can get a bigger rim, i normally just go up a tyre size.

[@festabuell8807]

Craig, Ive got an Enfield hardtail Chop, whats best way to send you pic/vid

[@devalgajjar9912]

Can I get the dimensions and design of that rear hardtail frame?

[@pikeywyatt]

dont over do it ,slowly does it.keep safe.

[@pikeywyatt]

thanks.

[@Lhawk2107]

👍🏻

[@marcpinion]

Nice one. Take it slow don’t over do it

[@geoffreyjones2000]

I bet that if you drank a Red Bull, you could build a bike in a day, sir

[@iannowie1383]

At this rate Dan and the winner of the GS won't get their bikes until Xmas 2021....Sorry but in my opinion you owe it to these guys to get their bikes completed.

[@bsatrialsguy9095]

can i have the swing arm please send to NI address i need for project just a request

[@THEDOGHOUSECUSTOMMOTORCYCLES]

Your welcome to it

[@davidwhite9293]

You do need a bigger shed

[@hazzalandy]

You don't peg them? I thought you'd be the type to like a bit of pegging

[@richardchanning8465]

That frame fitted too easy. It must be the wrong one.

[@THEDOGHOUSECUSTOMMOTORCYCLES]

Shhhhhh something will go wrong lol

[@shagun5836]

I wish you use indian black standard bullet gold line paint job with monograms one day.!!