Stryfe Select Fire Kit Installation and Review

[@dragonblaster-vu8wz]

I lost it at the intro. Also, if you don't name this blaster, you could also just put a plate with your x strike logo over that hole, that way no one could claim your stryfe as theirs

[@homelee665]

Hilarious new intro! I guess I'll have to get one of these kits now. Between you and Walcom, it seems like the best choice for select-fire. Thank you, sir.

[@ZachsYTUBE]

Lol loving the new intros, really shows off your humour!

[@snorribjorn5074]

That is indeed a Beautiful kit! Kudos to them for making it as ambidextrous as they did! (And I'm very glad that you didn't break it as well.)

[@everydayagent2210]

The take away is don’t shoot sneaky kids in the face with full auto nerf blasters! Ha! That whole bit made me smile and I had to listen to it twice! Awesome kit! I will have to procure one for myself.

[@Pi314music]

Thanks for the vid, I’m actually installing this kit in the next few weeks.

[@CaptainXavier]

Nice!

[@thine_gamernerf-roblox-and9444]

Yep, I am getting it soon too. Should be great.

[@bigemugamer]

Just saw and commented on it over at WalcomS7's channel then saw you had a vid on it to and thought "OMG Captain Xavier NEEDS to make a new weekly segment called 'Can it take a select fire kit?' then slap it in a Rayvenfire for the first episode" PREASE make this a thing!!

[@usernameshidds]

That is the best intro ever. Love it!

[@salwoyciesjes9182]

You could also put a tac rail on it to cover it up, or if you decide you don’t want anything, place some masking tape on the inside of the shell, fill the hole with hot glue, remove the tape, then sand down the glue. Just and idea.

[@slimebuck]

your time lapse music reminds me of the 1960 batman's rogue gallery having a dance party right before batman runs in going POW, BANG, YOZERS!

[@nathantalisien4284]

Another good video, Cap'n. A shame about the selector switch, but it's still a beaut of a blaster.

[@MegaNoah13]

So this is going to be your loot/ review intro! I like....

[@chatotalks5325]

well Capt'ns put out a new video, and my local thrift store had a stampede, so today's a good day

[@tristanowen1128]

Love all the new intros Captain

[@memefry2614]

I love this intro more than anything

[@Mr.Basher]

okay the new intro is amazing i love it... ive only seen the intro so far sooooooo i shouldn't be saying anything ill shush now...

[@noahkrelle9911]

Best and funnest intro ever seen! thumb up for this intro👍

[@collensworth99]

What about a expanded battery cover to put the switch on the right side. See if someone could 3D printed spacer to keep the power source in place.

[@devon8419]

You could always use contour putty on that hole and then paint over it

[@sixgunssixguns]

I want to get into nerf moving for larp and once I get some more experience I am totally going to do this!!!!

[@sixgunssixguns]

Moding*

[@sixgunssixguns]

Ayyyyy thx for the ❤ and by more experience I mean any lol

[@sir_goofs9456]

But I want some loot...oh well

[@CaptainXavier]

+Treecko_Gamer02 NONE FOR YOU!

[@sir_goofs9456]

Captain Xavier XD thank you for that dear sir

[@ALPHA.Mods.1]

This is nice. Select fire = more modularity.

[@bike_rider-k2h]

Cyber clone Alpha I'm Captain Xavier and I like all things modular.

[@goldnspartan]

Holy shit tripple upload ohhhhmahhhhgerrrrrd you spoil us good sir

[@danbasile1653]

Captain, did you install any sort of voltmeter or voltage alarm? I'm debating doing a build with this kit but the jam door switches look like they would block the 3D printed voltmeter bracket OutOfDarts/FoamBlast both offer.

[@CaptainXavier]

It has a voltage alarm built into it. You can configure it to whatever voltage you want.

[@danbasile1653]

Awesome, thanks!

[@danbasile1653]

How did you mount the rev trigger switch?

[@eggbag4182]

Could you look at the Xploders Mayhem? Even if it isn't Nerf? I can't find any disassembly videos on it anywhere!

[@bigemugamer]

I DID IT!! =D got my stryfe set up! removed all the electronic locks but left the physical locks in as they do not hamper the way i use the blaster, works great with 22 round worker mag i just recieved at the same time as the rapid fire kit, would love to pick up a couple more of these kits but I'm guessing better revised versions are on the way! THANKS Captain Xavier, your video did make it a bit easier to instal. BTW the 3 button one green one red LED board setup, can you adjust the speed of thew full auto fire mode?? or is it only for turning on off and switching between the 3 firing modes, thank you again in advance. =D

[@Aderalls]

I wish the selector itself was a switch with 3 positions. Working on a project at the moment and the AR style selector isn't doing it for me. The knockoff Stryfes on Amazon use a switch but the stock kit in those is terrible as far as I know.

[@rajivbahadur5852]

Hey man! Great video, what flywheel cage and motors are you using in this build?

[@CaptainXavier]

No idea. Probably whatever set Worker sent me with the kit.

[@williamsturgess9191]

I watched your video and loved the idea so went out a bought one. Also being left handed I tried to mount the plate where I could easily switch modes and found that I couldn't. So I designed one and am in the process of 3d printing it. I can send you the files if you would like?

[@CaptainXavier]

Absolutely!

[@williamsturgess9191]

@@CaptainXavier do you have an email address I can use or should I make a thingiverse page and link the url?

[@CaptainXavier]

@@williamsturgess9191 email address is in the video description of every video.

[@williamsturgess9191]

@@CaptainXavier gotcha, just finishing prototyping it now and will send shortly

[@xandercage2107]

Probably the funniest damn intro you've ever had

[@Mike-vu8nn]

If I want to do a complete overhaul of my stryfe, will it be an issue to install the select fire after the fact? I've done light mods on spring blasters, but never messed around with electronics before..

[@CaptainXavier]

No, you can do it all in whatever order you want.

[@WBertram]

Can I run 3 imrs on this or do I have to do something to make them work on this

[@StuckOnAFireHydrant]

Imrs are not recommended on any build because they cannot supply the amprage our motors pull. Lipos are the way to go but if you really want to the captain does say he is currently running that on imrs in the video if you watched it all the way through. Imrs are safety hazards but if you want your hard work to go up in smoke, to each his own.

[@pastiesandagstring]

Nice review. Did yours take a while to arrive? I ordered mine Black Friday. Took almost a month for it to be put into shipping. as of the 28 of dec it hadn't even left china yet.

[@CaptainXavier]

+pastiesandagstring yes, shipping from all of these places ( Lightake, NFStrike, Banggood) is going to be very slow. That is the price you pay to get the stuff so cheap.

[@Orax1701]

Captain Xavier Ah, the price of time...

[@pastiesandagstring]

Captain Xavier So...making a very late return to this subject lol. I eventually got my kit but I never got around to installing it. I started thinking about it recently and have discovered nfstrike and the page for the instructions seem to have vanished. Any chance you know of another location for these?

[@mattvonnerf3495]

Did you finally get around to converting it to LiPo? If so, what LiPo did you end up using and did you need an expanded battery door?

[@CaptainXavier]

Nope. This one still runs on LiFePO4 batteries.

[@jedileader0174]

Is this the kit you were talking about?

[@TheDenofBadgers]

Captain, how about you modify the switch by making it longer like an ak safety.

[@tangerinepaint3643]

A smaller regulator, nice, now all I need is a stryfe and this selecc fire kit

[@Dark-jx2es]

This thing was an absolute nightmare for me to install, but SO satisfying once it was done...also, ended up making a file to 3D print the selector switch (not the plate) because it is stupidly hard to paint.

[@legofanXXL]

Can you give me the file please.

[@maximk.3194]

What cage and flywheels?

[@rzrider683]

Have you tried Out of darts insutano( sorry for the spelling) wheels?

[@xWhitechapelx]

Captain, great job on your video.

[@CaptainXavier]

+DarkenKnights ...new to the channel I take it?

[@xWhitechapelx]

Nope not at all, I've been around for a while. I just rarely make any replies to your videos. if you replied that way, somebody must have offered the Monkee Mod kit in an earlier comment or I may have over looked it when reading below. If that is the case, then I retract my early comment and to say great job - Comment retracted and to say great job.

[@CaptainXavier]

+DarkenKnights I just meant that I have used that very kit in several videos already...

[@xWhitechapelx]

I haven't watch any of the past videos lately, I only watch your current videos as they come out, if you have used any full auto kits. I assumed they were from another company (s) as you have mention in your current videos. I rarely hear you use anything from Monkee Mods. If you have used anything from their company, I may have missed it and my apologies to that. Great work as always and keep it up..

[@CaptainXavier]

I got them from Tacticool Foam quite a while ago.

[@stevemelnick6779]

how does electronic motor braking work? is it important in highly modified blasters? how do i make the pusher always return? i have a full auto stryfe and a modified rapidstrike, both motor swap, lock removal, rewired and LiPo’d. the pusher sometimes goes out half way. how do i remedy this? and can you make a how-to video? p.s. your videos are awesome.

[@CaptainXavier]

Steve Melnick I'm pretty sure I have a mod tips video on that. If not I will do one.

[@CaptainXavier]

+Steve Melnick I do! But I spelled "braking" wrong. I spelled it "breaking:

[@stevemelnick6779]

awesome! ill search your channel when i get home from work

[@stevemelnick6779]

Captain Xavier its cool i never get the two mixed up bc im an automotive tech lol

[@Khourakunda]

Castro is that you?

[@ValTek_Armory]

i actually installed this kit in my latest primary just last night

[@CaptainXavier]

And is it not amazing?

[@ValTek_Armory]

its great! i'm gonna have to adjust the rate of fire some, but its perfect! i'll have to send you a pic of it on facebook

[@CaptainXavier]

Nice!

[@butterknife_mtb_rc]

What battery are you using with that? Also, would I be able to install this in a stryfe with an extended battery tray(top chunk of plastic was taken out)?

[@CaptainXavier]

All of that is explained in the video. No, you cannot extend the battery tray, that area is where the kit is install. In the video I tested it with IFR batteries but the kit is designed to run on LiPo as well.

[@butterknife_mtb_rc]

Thank you for clarifying that, also I was wondering if it could be installed in a demolisher?

[@natescloset777]

I tried installing mine but it won't do any of the modes. It is, instead, stuck on doing a 7 rotation burst for each trigger pull. Do you know of any way I can fix it? Thank-you!

[@CaptainXavier]

I ran into that. For me it was a matter of getting the selector switch in the correct position, turning it off, turning back on again.

[@natescloset777]

+Captain Xavier Hm, I'll try that. it seems to be doing the same thing even without the selector switch connected.

[@RIKO-SENA]

Name reccomend slfs select fire stryfe

[@mohamedzuraidi3319]

Hi Cap! I have a couple of questions for this kit in particular. 1. I'm installing the Kraken motors powered to a lipo hence will need to do the necessary however I noticed a lot of stuff in this kit especially in the area of the rev switch... should I do this mod first then install the select fire kit of the other way around? Or both at the same time coz it doesnt really matter? Thanks in advance :)

[@CaptainXavier]

I would install this kit first so you know what kind of space you will have available.

[@mohamedzuraidi3319]

Many Thanks :)

[@tinymonkeygaming1881]

Sweet kit dude it's awesome

[@adynholden9546]

I hope whoever is reading this has a nice day

[@Bean41]

Adyn Holden I am

[@beanieteamie7435]

Thanks

[@typorter9676]

Hey you to man

[@_gl1ch_reveiwsnerf213]

You too man 👍

[@co-op343]

Would it work in a duel stage raven. If not a single stage rayven?

[@CaptainXavier]

I am not sure what you think the number of stages has to do with it but this kit is specifically designed to fit into the shell of a Styfe. It will not fit in the shell of a Rayven. Not without a LOT of alteration.

[@slinger0083]

Could this kit work in a perses? If not, are you aware of any select fire kit that could?

[@CaptainXavier]

Not stock, obviously. They are completely different mechanisms. I am not aware of a drop in select fire kit for the Perses but I'm sure they will exist eventually.

[@Glitschklöte]

what kind of engines did you build? The seller told me to bridge the 20A fuse when I install Fangs revamped.

[@CaptainXavier]

Worker 132s I believe.

[@beerenmusli8220]

Awesome Video!!!!

[@nerdtvch5]

I wonder if this would work in the worker clear shell

[@CaptainXavier]

Yes

[@nerdtvch5]

@@CaptainXavier Thank you! :) That might be my first mod attempt, I'm too afraid to mess with my stock stuff

[@kingdoomsday9534]

How would you replace the battery

[@slimebuck]

Cap X, as a lefty as well I feel your pain.

[@willnolan7987]

Slime Bucket, as a fellow lefty, I feel your pain.

[@flyingfloorboard4097]

@@willnolan7987 , as a fellow lefty, I feel your pain

[@jedileader0174]

What wheels and motors do you recommend for this kit for it to have an average on par with rival on 4 IMRs.

[@CaptainXavier]

I recommend the worker 32's with the worker cage and the worker wheels. They were all designed to be used together and they work very well together. My LT ran this blaster at Endwar and it never failed him.

[@jedileader0174]

@@CaptainXavier, thank you.

[@owilliacfr]

@@CaptainXavier 132 motors? these? www.workermod.com/product/worker-mod-132-motor-set-for-nerf-n-strike-elite-stryfe-and-rapidstrike-cs-18-modify-toy-color-silver/

[@Tbug20]

i wonder if this would work with AAs. it sounds dumb i know but im curious

[@CaptainXavier]

No

[@Tbug20]

@@CaptainXavier good to know. i might pick one up if i ever upgrade to lipo.

[@Nikoline_The_Great]

Does anyone know why you can't just use a solenoid for the pusher? I am just curiuos.

[@CaptainXavier]

I can't think of any reason if you have one the fits and works.

[@doomlord7331]

Could this kit piggy back on the power supply on a MOSFET build?

[@CaptainXavier]

*looks over his shoulder expecting to see the electrical engineer you are talking to...see no one...looks back * Me? I haven't the foggiest idea...I don't even really understand what a MOSFET is or how they work...it is on the list of things to learn...but it is down there a bit. Right before "How do dance proper Samba rolls" but right after "How to make a proper Formaggio Sauce." It is a long a complicated list...

[@lemonflavorbri6]

can stock stryfe flywheels handle iMRs? I know how to set it up to use iMRs, but do I need to upgrade flywheels?

[@gamerguy9729]

Finn The Cheese Lord no but you probably need to upgrade the motors

[@rzrider683]

gamer guy actually, if you replace the internals, you might as well use lipo.

[@gustaafdehaas]

Captain Xavier! Great video. Could this kit be installed in a rapidstrike?

[@gamerguy9729]

gustaaf no

[@gustaafdehaas]

gamer guy thank you!

[@dacenmclean7901]

gamer guy yes you can, anything you can fit it in. I've seen someone put one in a button

[@dacenmclean7901]

Nitron**

[@valerielastname9508]

I don't think increasing voltage would increase rate of fire, given the voltage regulator.

[@CaptainXavier]

+Armadillo 2001 the kit has a feature that allows you to set the fire rate but the max rate is limited but the voltage of the system.

[@valerielastname9508]

Ah. Makes sense.

[@slimebuck]

so this kit makes the retaliator useless?? does this kit cost less?

[@En1gmatic1]

The kit cost about $40

[@slimebuck]

thank you En1gmatic1

[@marsmanstudios3076]

Question: does this include everything to completely rewire a stryfe and upgrade to 2s/3s lipo with xt60 connector? If anyone knows thanks in advance!

[@CaptainXavier]

No. This is just for the pusher system and it is designed to be soldered into the existing battery tray. You need the Worker Flywheel kit (also in this blaster but was featured in a different review video) for that.

[@nelsonbrum8496]

This SF kit is NLA @ the link provided. Anyone else still sell/manufacture it?

[@CaptainXavier]

Try Amazon. They had it last I checked.

[@nelsonbrum8496]

@@CaptainXavier Thanks Sir, will check.

[@nelsonbrum8496]

@@CaptainXavier Looks like two kits available. (as of 01/02/2021 for future readers) I'm going to go for the more expensive one, switched a triple 7-segment display instead of the three button jam door unit. Looks like I have a month to wait for it as well (Pepperidge farms remembers 4-6 week shipping times). Guess OOD is getting another order from me soon. *smirk*

[@willnolan7987]

Has anyone made a good mod guide for the monkeemods? Or is it the same?

[@CaptainXavier]

Is it select fire or just full auto?

[@Orax1701]

What happens if you don't turn the kit on? Is it just single fire or does the Stryfe not fire at all?

[@DoitForTheLolz1]

I would think nothing would happen unless you happened to have a seperate battery for the pusher mechanism, but then why would you try to fire a dart without the flywheels turned on anyways?

[@CaptainXavier]

+DoitForTheLolz1 if you do not turn it on it does not fire.

[@Orax1701]

Captain Xavier Thank you for your reply and keep up the very interesting (and good) work!! P.S. Any idea if the kits come with black fire selection switches now? Because the pictures of the ones for sale on NFStrike.com only show orange switches and there is no option to choose the colour and I like black 😊.

[@JeffStAndre]

Can this work off the default alkalines?

[@CaptainXavier]

I have never tried it...but I suspect not. The voltage would be too low and the current draw too high

[@slimebuck]

THAT LOOT IS FOR ME!! GIMMIE GIMMIE GIMME!!!!!

[@itzluc4000]

Can you buy this om Amazon aswell?

[@CaptainXavier]

Why are you asking me? Why not just search Amazon?

[@JR-sq6jn]

Dude love your vids can you do a review video on all your guns.

[@CaptainXavier]

I just did...on new years day...kinda...

[@JR-sq6jn]

Oh ok thx

[@CalebDoesStuff]

Looks cool!

[@tayloranderson9548]

what battery are you using?

[@Bean41]

Is it a “bad” idea to run this on a 2s?

[@CaptainXavier]

Probably

[@Bean41]

Captain Xavier what 3s do you use and- or recommend for this kit?

[@niyanpatel6796]

I got one of these for Christmas

[@bigemugamer]

lol sitting at my desk going over the installations and your video multiple times..... i need more references to do this to a stock stryfe =( edit: you talk about removing the whole resistor assembly but in the instructions they just move it aside, it looks like its still connected to the battery tab edit2: mine did NOT come with the delicious flavor pack of lubricating grease for the gears =(

[@bigemugamer]

5 hours later, still super annoying to put together >=( edit: ok to be honest i took a break =P but now i got a heart beat!! =D

[@bigemugamer]

seriously though..... you could put this mod in any flywheel blaster right?? I really want to buy another one and embue my Rayvenfire with the same ability. edit: obviously you would need to mod it, but there has to be a rayvenfire one in the make somewhere, its just as popular a blaster imo.

[@kingdoomsday9534]

And do you need to Sauter

[@CaptainXavier]

Depends on what battery you want to use. If you want to use a LiPo then you need to solder a new connector in.

[@kingdoomsday9534]

Thank you so much I just started modding so this will help A lot

[@mrnormietron4186]

Hello there

[@CaptainXavier]

hi

[@its_not_crowfoot2688]

Ragnar Simonsson i like you profiel image

[@mrnormietron4186]

ethan bull Thank you

[@its_not_crowfoot2688]

Ragnar Simonsson no problem

[@cesarmeza3583]

GENERAL KENOBI

[@_gl1ch_reveiwsnerf213]

Where can I buy it?

[@CaptainXavier]

Amazon.com

[@_gl1ch_reveiwsnerf213]

I still can’t find it, is it still there?

[@CaptainXavier]

If going to Amazon and typing "stryfe select" is beyond your technical skills I worry about your ability to install this kit... Goshfun Full-Automatic Modified Kit V7 Finger Sensor Single Triple Continuous Safe Shoot Mode for Nerf Stryfe Modified - Accessories Color Random, Upgraded 2021 www.amazon.com/dp/B07DK4N25X/ref=cm_sw_r_apan_glt_i_9QZY60JMN7JVWNZ1CT67

[@Bean41]

What dose the barrel do?

[@CaptainXavier]

I assume it improves accuracy?

[@Bean41]

Captain Xavier ahh that makes sense. I am assuming you forgot but what about the magazine covers you reviewed a while back. I asked if they would interfere with a double AK pouch?

[@CaptainXavier]

They are a bit tight, but they will fit

[@CrimsonHoodnerfer]

Is it possible to make a flywheel air blaster?

[@CaptainXavier]

+Crimson Hood nerfer a what?

[@CrimsonHoodnerfer]

Captain Xavier so take a rapidstrike or a stryfe for instance and maybe you can put a air blaster into those shell's. But still keeping the flwheels and the motors in it. My idea for the air blaster would be a big blast tank, because it's straight. This will also make it easier to make a brass breach while still using magazine's. Just a crazy idea

[@CaptainXavier]

Does the air blaster fire into the flywheels or is it a separate system?

[@CrimsonHoodnerfer]

Captain Xavier yes the air blaster will fire into the flywheel cage.

[@CrimsonHoodnerfer]

Captain Xavier I hope you will give it a thought and maybe try it.

[@penguinstar4249]

Are you going to paint that

[@CaptainXavier]

A little. I will be painting the white stripe black and putting my Logo on it.

[@jennstuition]

You are so funny Captian Xavier...

[@tangerinepaint3643]

Wait, your left handed?

[@CaptainXavier]

yes

[@oanamariamuja5970]

Hi

[@CaptainXavier]

Hi

[@edwardmorrissette5817]

Anyone think this could work for a rayven

[@CaptainXavier]

+Edward Morrissette yes, but not easily

[@edwardmorrissette5817]

Thank you!

[@its_not_crowfoot2688]

hi

[@CaptainXavier]

hi

[@Jonathan-on1gi]

Are u left handed because I am

[@CaptainXavier]

Yes

[@Jonathan-on1gi]

Captain Xavier thanks for replying you are my fav youtuber

[@CaptainXavier]

:)

[@Jonathan-on1gi]

This is the best day ever!!!!!! 😀😀😀😀

[@maxshortburner]

me too

[@amalio2265]

I want loot!

[@randallmoore9267]

The cool

[@captainkeeli7734]

And the 53rd like

[@askeleton6927]

51st.

[@captainkeeli7734]

I'm early I'm the 404th view yay

[@bike_rider-k2h]

Robert Juett Error 404 page not found.

[@Orax1701]

Error 404 _viewer_ not found