Just WOW ! Absolutely brilliant build...true craftsmanship. Thank you for making this available.
@Henry_Little3 жыл бұрын
Beautiful build, with exquisite attention to detail... Nice!👍✌️
@laheu3 жыл бұрын
Oil-canning technique with photo etch is new to me. It looks perfect, so I'll try it out.
@blackmamba34273 жыл бұрын
Awesome video and brilliant workmanship
@theblankettruth3 жыл бұрын
Great work so far. I have been able to do several Arleigh Burkes but have never felt comfortable/ experienced enough to go all out with the detail-up kits. I will be following this series with special interest!
@jzghostrider663 жыл бұрын
OUTSTANDING I'll be following this one with serious interest as this one is on my too do list.
@saulrodriguez1309 Жыл бұрын
Es hermoso el Arleigh. ¡Buen trabajo! 👏
@andrewgrace44103 жыл бұрын
Beautiful build, the Pontos kit is awesome
@madazza723 жыл бұрын
Its about time someone built a arleigh burke class destroyer awesome work i am currently building one myself i look forward to the next video with great interest 😀
@flugwuzzi3 жыл бұрын
WOW! Excellent work on the PE parts. Looks so much better with the Pontos set.
@christophersnyder15323 жыл бұрын
This is exceptional, I plan to build Bainbridge in this scale, the ship that had helped rescue Captain Richard Phillips from the Somali pirates, back in 2009, and have a few good references in preparation for building my version. Take care, and all the best.
@studioblueocean45903 жыл бұрын
I also watched the movie impressively. support your work.
@OzScalemodeling3 жыл бұрын
Very nice work, Looking forward to Part 2 ⚓👍
@CommandShadow07 Жыл бұрын
Question?! What kind of glue for metal on plastic? Please name of the glue, and Response ASAP. Thanks!!
@andys98993 жыл бұрын
Ha, i really hoped for an Arleigh Burke Class as the next model. Great choice.
@owenchristie69583 жыл бұрын
I can barley but some seat belts on a 1:48 aircraft. How you do that; I’m amazed
@SteveDobbelare Жыл бұрын
How do you apply the large flat photoetch? Spot glue or coat whole surface? If coating whole surface how do you keep glue from drying on surface before applying?
@Mkakarot993 жыл бұрын
Hey there! Love your videos ! Can you please tell me what glue you use for the photo etch? Also I noticed you made moulding lines on the funnels.. did you do it by bending them? Im kinda new in the hobby
@studioblueocean45903 жыл бұрын
I use locktite 401. Just scratching with a knife.
@robertgriffin6623 жыл бұрын
Not even finished and she's Beautiful!
@jonasdavebaclig665710 ай бұрын
Question sir what types of grey did you use for flight decks?
@pascallaval20833 жыл бұрын
Super, beau travaille. 😃👍
@Tony1961803 жыл бұрын
Insane, I have a new name for this builder, " Master Steady Hands " Just Awesome.
@Paul_Sim2 жыл бұрын
상가대 너트는 따로 사신건가요? HS 모델 상가대는 기본적으로 너트가 작은거 같아서요
@fabioboscolo20313 жыл бұрын
what a nice job ! well done mate !
@Hey_MikeZeroEcho22P3 жыл бұрын
Super Start!!! I was assigned to FFG's when I was in the USN..... so I have some 'OLD' FFG kits and planning on using the 'Pontos' PE on those kits. Although my FFG's are Not the 'Academy' kit, I'll try to do my best in manipulating the 'Pontos' PE onto that resin kit!! Wish me luck on that.....by the way.......... The "oil-can" method of metal skin on funnels looked Quite Interesting!!!! I must look at that part again on your video!!! ( but if you noticed there is much of that on the Rest of the skin of the ship!! [how would you do THAT part is a mystery!!!])
@studioblueocean45903 жыл бұрын
I'm worried, too. no choice but to cover that part with painting skills.
@AppleInk2 жыл бұрын
Fantastic work! also love that you use WoWS music : D
@romeohenderson7772 жыл бұрын
do you know the song
@rexburman483 жыл бұрын
I just finished building an Arleigh Burke 1/350 scale. Now I need to find the time to edit and post my build on KZbin.
@m60873 жыл бұрын
Superbe travail.
@peterhughes70993 жыл бұрын
Wonderful to see you at work, and I was thinking of adding this kit to my collection to build in the future, however watching you build it, I really don't know if I have the ability to make it anywhere as near as good as this.
@studioblueocean45903 жыл бұрын
In fact, it is difficult to make. It will be enough to make the kit well.
@JedenSiedemDwa3 жыл бұрын
So great done! All the best for You! ;)
@fw14213 жыл бұрын
It would have been nice to have the corrected bow included with the 1/2-0 Bismarck kit from Pontos,correcting it was a bear.
@stormtrooper66023 жыл бұрын
왜 그런건지 모르겠는데,유난히 현대 군함들이 단차가 잘 보이네요. 대전기 전함들이나 구축함들은 단차가 있어도 티가 잘 안나는데 이지스함들은 단차가 조금만 있어도 바로 티가 나서 조립하기 은근 까다로운 것 같네요. 예전에 1/350으로 타이콘데로가급 이지스 순양함을 조립한 적이 있는데 단차가 장난 아니였던지라, 그 이후론 대전기 군함들만 사게되네요ㅋㅋㅋ
@glenflanderka65043 жыл бұрын
Nice work! Crazy amount of detail. What are you using to prime the PE?
@studioblueocean45903 жыл бұрын
i use car paint primer.
@glenflanderka65043 жыл бұрын
@@studioblueocean4590 Acid etch?
@서동길-o9f3 жыл бұрын
16:33 조립을 잘못한게 아니고 다 저런듯. 저기 에칭이 빠진거 같기도하고.. 여튼 넘 멋지게 만들고 있네요. ^^ 다음 영상도 기다리고 있습니다.
@studioblueocean45903 жыл бұрын
조립하면서 생긴 조그마한 단차들이 모여서 저래 된것같기도 하고요..ㅜㅜ
@MyTiefighter3 жыл бұрын
알레이버크는 사랑입니다.
@tuananhnguyenquang94113 жыл бұрын
Thanks so much to do this model☺️☺️☺️
@jlrr54213 жыл бұрын
Huuufff y solo es el primer video 👍🇲🇽
@maxelsoro62923 жыл бұрын
Hmm interesting uss wayne e meyers will be perfect for us destroyers top unit in my toy collection But i am waitimg the big 1 of it
@neboskii87563 жыл бұрын
Scale modeling is fun | 'u' |
@doganaybalaban50803 жыл бұрын
Again an epic video built is coming...
@davidlarge88943 жыл бұрын
With those fingers you should have been a surgeon the way you handle PE I cannot do it .
@doctorshawzy64773 жыл бұрын
with so many brass extras, it would be better for the manufacturer to make the entire model out of brass in the first place..
@Satisfyer0072 жыл бұрын
WOW
@rcdiy48323 жыл бұрын
where are you from
@АрсенийКудряшов-ы2и3 жыл бұрын
Wow
@sbf1093 жыл бұрын
오토모댈 에칭작업은 함선에 비하면 어무것도 아니네요. ㅎㅎ; 어제 영상 문제때문에 오션님 리플 달린글 눈물을 머금고 제업했습니다. ㅜㅜ
@studioblueocean45903 жыл бұрын
영상이 바로 사라져서 문제가 있나 했는데 그런 일이 ㅜㅜ
@겐트혐오옵치사랑2 жыл бұрын
킷은 안비싼데 디테일업 애칭이 겁나 비싼 특이한 케이스.
@Serenityindailylife2 жыл бұрын
Metal earth destroyer
@GOODDA3 жыл бұрын
선댓글 후감상
@studioblueocean45903 жыл бұрын
여어 개근상 줘야겠는걸?
@GOODDA3 жыл бұрын
테이프 성애자는 내가 생각했던것 보다 훨씬 더 변태였다..
@Paulpubg-z5g3 жыл бұрын
World of warship song 😃🤩😍😊
@Ggarrong3 жыл бұрын
안녕하세요
@Ggarrong3 жыл бұрын
...
@fredtedstedman3 жыл бұрын
I can't see the point in buying a plastic kit -and then putting this much photo etch on it .
@tyvernoverlord53633 жыл бұрын
detail that the plastic can’t give you
@fredtedstedman3 жыл бұрын
@@tyvernoverlord5363 it's like buying a brand new (expensive ) car and covering it in tinfoil , I bet the brass costs almost as much as the ship-perhaps more .
@jusdrewit2 жыл бұрын
@@fredtedstedmanPE parts are ~$30, kit is around $50, I think the car comparison makes no sense in this context. To create a museum quality kit you need PE parts. This is beautiful work of art