STUFFED AND TUCKED! Foxbody Coilover Kit & Drop Brackets

It's time to install the coilover kit! But we hit a snag along the way... No worries we got it done. With that being said hopefully this video sheds some light on this installation on this kit.
#upr #coilovers #install
Link to coil over kit. lmr.com/item/U...
WANT BREW2L DECALS? www.shopbrew2l...
LINK TO SHIRTS: / @brew2lfoxbody
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.t...
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.c....

[@motownXJdad9565]

this is my favorite fox on youtube, i love the the fact that its actually built to perform, and not a poser with a body kit

[@BREW2LFOXBODY]

Thanks bud, it’s still a work in progress but we’ll get there soon hopefully 🙏

[@pissedntalk5295]

Absolutely inspiring to see what you built on a budget and in your garage before you had the shop and hoist !! Still my favourite fox body channel !!

[@BREW2LFOXBODY]

Thanks brother! 🤘

[@stevenwatts586]

00:03 every car guy/mustang guy ever👀

[@sespeedshop]

LOVE that Swass ! LOL Sir Mix-a-lot for the win! I used to cruise to that album back in the day.

[@FoxcastMedia]

Yeah! Time for a little testing to get that suspension dialed in

[@BREW2LFOXBODY]

Soon!!

[@coreyprice5411]

Man I just did this exact install with the rear coil overs 2 days ago... ran into an issue with having a 93 cobra rear end in it that after swapping to fox length 4 lug axles to suck up the tire inside the fender well the brake calipers will hit the shock at the spring for the parking brake and you lose about the last inch of travel on the threads. But that’s the sacrifice for 4lugmafia kinda guys!! Great content can’t wait to see it on the floor!

[@jpp9846]

She's came a long way since being a blue, dead fox, back where your garage now stands.

[@BREW2LFOXBODY]

Yes she has, I’m thinking about making a recap video for the guys that are new to the channel.

[@jpp9846]

@@BREW2LFOXBODY that would be good

[@travisdunn5675]

RIP convertible donor car. Lol. Man, most people wouldn't believe it's the same car as back then

[@floppyseizure8615]

8:35 Some classic Sir Mix-a-lot. Haven't heard that song in a while.

[@BREW2LFOXBODY]

Love some old school mixalot

[@reloaded1880]

loving the shop and new drive way

[@paulhudgins5120]

Just love what you are doing to the under side of the car, it looks clean, strong and well done , great job, looks awesome.

[@wesboyd7416]

Ready to see some pulls!!!

[@stephenroberts7816]

Looks like a fun time in your shop. That car looks so tough with those tires built rear

[@BREW2LFOXBODY]

Thanks bud, we have a blast when we’re all together! Lol

[@ka0sud0ku98]

just got my limited hat in bud thanks again for everything you do!

[@PartlyCloudy420]

i'm adding strange coil overs next week to my Go Slow along with a 35 spline axle spool kit from...thanks for you videos car looks great #happyracing

[@3.0whipple88]

Nak doing big things, ready to launch!!!

[@DanKennedyEats]

installed the same upr kit on my vert! awesome stuff and easy install, great vid as always guys.

[@shanebatten6473]

Gonna be hookin and bookin soon....can’t wait

[@seastacker8582]

This thing should hook awesome! My daughter heard peppa and came over to see. I’m surprised my girls don’t have a brittish accent yet. They already call gas “petrol” and vacations “holidays”. 😂😂

[@BREW2LFOXBODY]

Looooool I love it 😂

[@mattcox3373]

The car looks awesome underneath and I can’t wait to see what it will do. Love the updates on the shop and yard as well

[@BREW2LFOXBODY]

Thanks Vic!

[@Elliottfan]

The ONLY thing I could recommend since you're doing all the rear end work would be 93 4 lug cobra disks! Super easy and cheap for you to do! I definitely think this is the best fox on KZbin though, it's just got a vibe of it's own!

[@BREW2LFOXBODY]

Thanks bud! We will get there at some point. The drum brakes will be fine for now though. 🤘

[@wastedwagesmercuryman6018]

Damn brother, would have been a great time to install a safety loop! That thing is gonna hook! With the upper arms i drill the pilot and opened it up to where it was a tight fit for the spacer. Hammer that area to where the support will not fall in and then with the arm in place drill the opposite hole!

[@BREW2LFOXBODY]

The loop is coming, just gotta wait on the funds brother. That’s a good technique 👌

[@rr122608]

Awesome video! I enjoy seeing your great work.

[@BREW2LFOXBODY]

Thanks 🙏

[@jimmyjamesgarage3290]

That new rear end setup looks hard!

[@woundedfox5109]

The blue that shows up at 12:28 is brew2l...car is beautiful, got my hat yesterday, its awesome thank y'all so much.

[@BREW2LFOXBODY]

Awesome! Thanks again Larry for your support 👊

[@bama_5.051]

Same as always great content. U and Andrew should do a sitcom together LMAO

[@santasstang8798]

Ole Drew always causing drama!

[@cloucks1003]

As always... thanks for the content!

[@jasonhastings5538]

That coilover kit looks good!!

[@c.campbell209]

Wow! Looks fantastic. Very inspirational 👍👏

[@jakehooper680]

Another great and informative video . Thanks for sharing brother. BTW the car is looking awesome !

[@BREW2LFOXBODY]

Thanks Jake

[@RegularGuyGarage]

Cars looking good buddy 🤘can’t wait to see it run

[@BREW2LFOXBODY]

Thanks brother!! Hopefully soon

[@WRJ63]

anxious to see how these coil overs work out for you, I have CO's on the front of my car and love them, but I also installed a strut tower brace to help strengthen it all up, I'm kinda worried about putting all the weight and strain on something that was designed to only deal with what a strut or in the rear the shock places on it and I don't want to add bracing in the rear of my car that will interfere with the cargo room in what is already a small hatch area, I like having a spare tire and a sub in the back.

[@Kam-Bogey]

I just put SR Performance V2 Coilovers on my 92 vert. Changes the car!! Lowered it 2”!

[@AhmedBurton]

I don’t comment on every video but you are my favorite KZbinr. Nice video. Also what’s the link the the coilover kit you bought? Didn’t see it in the description.

[@BREW2LFOXBODY]

I just added it. Sorry about that

[@Dmnxx]

Peppa pig and chocolate milk. Aw that's cute Andrew. 😁

[@BREW2LFOXBODY]

😆😆😆😆🔥🔥

[@stevebussius7887]

Hey guys, great channel. FYI, The lower shock brackets in the video are intended for eye to eye style coil over shocks only Like a Viking bolt in coil over kit or equivalent. The Strange shocks with the stud at the top will put the shock at such an angle it will contact the lower bracket. If you're looking to lower the rear of a Fox Body or SN95 Mustang, the Viking style coil over kit is a better choice. The coil over sleeve and Strange shock combo is intended more for a very mild drop (1-1.5 inch max) or gaining clearance for taller slicks. Keep up the great work!

[@chriskyllonen4646]

Isn't he using strange shocks?

[@santasstang8798]

Need to get a safety loop! Looking awesome buddy! Beautiful

[@BREW2LFOXBODY]

It’s coming brother. 👌

[@santasstang8798]

@@BREW2LFOXBODY I knew I’d taught you well!!!! 😂

[@motorbrains88chris]

Hell yeah looks great !!! Nice work

[@BREW2LFOXBODY]

Thanks bud!

[@franciscovasquez4555]

Great up date

[@noelibarra3903]

Awesome work buddy 👍🏼

[@RPJs-Cuisine]

Great video! And weather or not Andrew likes it or not. He is very much part of this channel. U 2 have great chemistry. I wish me and my ex stepson had the same. BTW, hopefully u have shooooooo'd away the haters. SVE, 4 Lug, u can serve me up! Lol!

[@BREW2LFOXBODY]

Lol, we definitely have a blast! Hopefully 🙏

[@scottsutherlin7169]

Looks good brew2l hard work pays off, your 🦊 came along way and looks hard core! Hope to meet ya some day seem to be a cool operator!🤘🔥💯😎

[@BREW2LFOXBODY]

I appreciate that 🙌

[@RustyDreamsGarage]

Looking good ol buddy. Hopefully long term gains make it worth doing. You’ll have to give an update after awhile on what you think of the rear coilovers

[@BREW2LFOXBODY]

Will do 👍

[@bayoucoupe8998]

Looking good BREW2L , Calypso clone has come a long way man. Won’t be long now you’ll be moving asphalt off the highway 💪🏼.

[@BREW2LFOXBODY]

Thanks bud, I hope so

[@LynnTwinCustoms513]

She gonna be nice and solid out back now!

[@Houseacwth]

Looking good homes.

[@BREW2LFOXBODY]

Thanks House 😎

[@NoFox_Given]

After I did everything on my car the axle was pushed to the driver side about a 1/4”. Weird that you don’t really notice it until you put a big set of wheels on the back.

[@BREW2LFOXBODY]

These car were all over the place it seems. Some more to passenger side and some to the driver side.. 🤦‍♂️😆

[@bigdaddyc1997]

Lets gooooo love your videos man!!!

[@BREW2LFOXBODY]

🔥🔥🔥🙌

[@MikeSVOR]

Beautiful work man! I miss having time to work on my fox. That lift is awesome! The undercarriage is soo clean too.

[@foxbodyshu5.056]

Looks great man! Love Hunter’s Cobra too! 👍🏻

[@irshred]

Looking good Brew2l

[@BREW2LFOXBODY]

Thanks bill

[@GearHead704]

Can't wait to see it go down the track at FTO

[@KevinMO91]

Hey, I'm doing the same thing as you and keeping my foxbodies 4 lug. I know you are gonna do a video on the rear drums but have you considered the kit from foxbodybrakes? Its like 500 bucks for everything to convert to 4 lug rear discs. I'm doing the 4 lug rear discs, and gonna upgrade to the 73mm svo front calipers with a cobra brake booster. Really interested in your upcoming brake video though for sure.

[@BREW2LFOXBODY]

We will eventually go to disc in the rear. Just not a priority at the moment 👌

[@kb01663]

my car leans down way more on the driver side. I put the adjustable control arms from maximum motorsports to even it out and my passenger side still sits higher

[@BREW2LFOXBODY]

Are you sure your springs are the same length? Also are they turned correctly?

[@kb01663]

@@BREW2LFOXBODY oh yeah, they're sve lowering springs pig tails to the rear. The car was still sitting low on the driver side rear with the stock springs. I've redone the whole rear suspension. What was crazy was all the stock bushing were still in good condition, replaced all the bushings with polyurethane ones

[@mysticker11]

mustang coming ......hummm...whooom whoom...rooooooooaarr!!!!.... camaro or firechicken comin....rap tap tap pop tat tat poo pooooonnnnn.......lol have a good day

[@BREW2LFOXBODY]

Loooool 😂😆👌

[@fordtechlife]

Man that shop looks awesome 🚗🦊🔧💯🔴🇺🇲💪

[@mikej9932]

Damn ready to run some 8's!!!!

[@BREW2LFOXBODY]

In the 1/8 maybe 😂

[@zacharyblum9862]

I’ve got a Procharger 302 with stock cam. What’s your recommendation on a cam ? “Blower cams? Alphabet cams?” Thanks Brew2l!

[@BREW2LFOXBODY]

As far as off the shelf cams go you really can’t beat the F cam with a blower. Otherwise just go with a custom grind cam. IMO

[@07bluelbz]

Looks awesome. Only thing I'd recommend later is a driveshaft loop.

[@BREW2LFOXBODY]

It’s coming. Got to replenish some funds

[@07bluelbz]

@@BREW2LFOXBODY I know the feeling. I ordered some parts last night and thought about ordering the Stifflers loop but I decided to wait also.

[@Jay-zk7xk]

Andrew was eating good in this video lol

[@SpazStampy]

Have you ever considered the MM torque arm! I’ve been considering it

[@BREW2LFOXBODY]

Not really looked into it. I might check it out today though. 👍

[@late-modelmustangnation4252]

Watching from ponies in the smokies never miss a vid 😀

[@BREW2LFOXBODY]

🤘🤘🤘🤘 wish I was there!! 🙌

[@scottiebingham9682]

What size rear tires do you have? Enjoy watching your videos and learning as I just bought my first Foxbody in January.

[@BREW2LFOXBODY]

275/40/15 on 15x10 wheels. Glad the videos are helping!

[@scottiebingham9682]

@@BREW2LFOXBODY Thank you sir. I’ve got 245/45/17 on it now and was thinking of going to a 275/40/17 I’ve learned a lot from your videos

[@vernondavis2207]

Excellent vid as usual, however I didnt hear you mention anything about the pinion snubber, which needs to be changed to a shorter one.Lowering the car causes the diff to hit the stock snubber earlier, bottoming the shocks out earlier due to the limited suspension travel with the stock snubber on a lowered car..I speak from 1 busted Lakewood 50/50 and 2 Strange. 10 ways experience! Keep up the love of the hobby! Vernon "Vette Killer" of Tampa Fl💪🏾🙏🏾..also, only certain shocks work with the UPR lowering kit..

[@eddylorenzo5033]

Nice video 4 link is for track give an episode on track suspension

[@k5wxp22]

Man, that undercarriage is CLEAN! Mine has "rust protection" thanks to driving from Texas to Florida with leaky valve cover gaskets. 😆 I can't seem to get it clean, even with a pressure washer. Any suggestions?

[@BREW2LFOXBODY]

Thanks bro, I just used purple power and a pressure washer myself.

[@jaysonescoe5799]

Give. Easy off oven cleaner a go!! Just stay up wind!!

[@MorbidThrasher666]

Looking good!!!

[@vtecbanger3180]

I had a gt vertigo when I was little reminds me of your pic. What year bmx is your pic?

[@Pushrodlife]

Lookin good!

[@bigmrc71]

I have the same coilovers, the only thing i dont like is the set screws ,i feel they'll mess up the threads on the coilover. i wish they had a lock ring instead

[@BREW2LFOXBODY]

I’ll be keeping a check on them.

[@franciscoaponte5933]

Nice

[@maddmikesmotorsports8909]

Few questions #1 what reinforce kit and coilover kit did you install ? #2 How do you like the Team Z grip series kit ? #3 Why didn't you use the Team Z springs and why no anti roll bar. Sorry so long I just did the same swap . Team Z setup, 31 spline axles spool 4.30 gear. And getting little input on a final adjustment.

[@StLMikie]

Dude. I just had to replace a coilover. Strange double adjustable. $300 plus dollars for that thing. Glad only one was boogered

[@BREW2LFOXBODY]

Damn.... 👀

[@5PointSlow]

Bro you kill me on how you say coilovers. It sounds like you're saying coalovers. 🤣😂🤣😅

[@BREW2LFOXBODY]

😂😆

[@marcusfabiousmaximus3463]

Love the channel,Where did you get the drop brackets from?

[@shawnnance2746]

Hey brew2L, I finally found me a car, however I’m fixing to order the stuff to restore the sunroof. So my question is, what’s the lmr code to use and also I wanna do what I can to support the channel so can I order somehow to help you and the channel out?

[@BREW2LFOXBODY]

Congratulations! The current code is BREW2LHPTQ It ends on Tuesday I think.

[@shawnnance2746]

@@BREW2LFOXBODY thanks man!

[@pvsheridan]

@9:30ish you mention "upper and lower reinforcements" for the frame rails...is that a separate kit from this LMR coil-over kit? Thanks so much for the video

[@thundermite1241]

Imagine a coyote awd foxbody

[@topdragster365w]

Hello there Like ask you on the bottom shock adjustable mount that you said is stupid expensive? Lol. Thanks think im need them put long stroke shock on my dragradial mustang. Thanks very good channel you doing.

[@joepiazza3037]

Hi Brew2l! Nice fox 😁, what did you spray on the underbody (undercarriage) to make it black? Looks brand new. Thank you!

[@MuscleCarGarage2022]

So we're your shocks the Strange single adjustable? The fitment section at the bottom of LMR link your provided states these only work with Strange 10 way and Lakewood. Any info is appreciated

[@brezicky]

Awesome fox is looking nasty

[@stangaddiction8885]

I have the same exact setup on my coyote fox with the drop brackets and coilovers. After installing the drop brackets, my car is super bouncy, I have strange shocks and when I adjust them, it doesn't change anything. Do you think the shocks have gone out? Previously I was riding near the end of the shock, it would bang hard on bumps, I assume the shocks were bottoming out also. Same reason why I bought the drop brackets.

[@MarkJones-ct4wx]

I have the same shocks and coil over kit on my 84. I like mine low too. I'm having the same problem with shocks bottoming out. Did those drop brackets work out ok? UPR says they won't work with those shocks and coil overs.

[@torque8475]

So I noticed (at least on lmr) the “strange” front coil over kit springs are 12” but these springs are 10” would that effect anything?

[@Funky5.0]

funky 1990 mustang..again excellent video..Ii see u kept your drum brakes..how fast do you think you can go before a Break upgrade...

[@michaelsima9186]

I didn’t see any driveshaft loops??

[@jblaze0382nj]

Where did Andrew get those rear shock drop brackets? I can't find them

[@korygreene3875]

I have a 1983 ford mustang convertible and it has the stock v6 and I want to swap for a newer Ford V6 any suggestions on where to start?

[@aaronrepsher7628]

Looks great!!! I've been waiting for this video because i have these coilovers in my LMR cart i was wanting to see a few things like the tire/wheel clearance with the springs and coilovers on the shocks and also is there a way i can buy those shock relocation adjustable brackets separately? Also are you still running a spacer on the rear wheels and if so what is the thickness? I'm excited for you and excited to see what kind of et's this thing puts down now with the new setup?!?.....well whats next for this car???347 and bigger turbo??? Can't wait to see whats in store after Ford takeover!

[@aaronrepsher7628]

Also one more thing are you installing the SVE torque box set? Thats the one I've been eyeing up it looks like best bang for buck to sturdy up that chinsy factory sheet metal that was Fords "afterthought"!

[@BREW2LFOXBODY]

No spacers, LMR doesn’t sell the brackets that I know of. I’d be happy to see some 7:40s in the 1/8 on this setup

[@aaronrepsher7628]

@@BREW2LFOXBODY Thanks for the info, what is the width of your rear wheel and tire combo? I have 15inch prostars with nitto drag radials 10.5 wide so im wanting to make sure i can squeeze those back on with the coilovers.

[@sirhammy3274]

Did you put it on your tab at Harry's?

[@BREW2LFOXBODY]

I did actually, but he said this was the last time... 😞😞

[@briancrosby6895]

Hows the spherical bearings on the street? I'm about to redo my suspension as we speak

[@Donovan.Creamer]

How did the coil over drop brackets work out? I need a set but everything says they won’t work with stock style the upr maximum coil over kit like you’ve got.

[@wadestewart901]

Hey bud, went to buy a hat and can't get to the payment screen. It gives me an error. Could you help?

[@BREW2LFOXBODY]

Not sure on that... maybe try to reload to screen again. I just tried it and it worked for me. Let me know if you continue to have problems

[@wadestewart901]

@@BREW2LFOXBODY i tried again with Chrome (I have an android) it did not work. I used Microsoft edge and it worked flawlessly. Thanks!

[@k9-hero374]

Hey can u tell me about your quads shocks like u obviously removed them but is it ok or should I addd something to make up for them ??

[@BREW2LFOXBODY]

Just take them off. Unless it’s a street car only then I would leave them. They actually help keep the rear end from shifting as bad from side to side. But if you have adjustable upper control arms you can fix that issue by adjusting them.

[@k9-hero374]

@@BREW2LFOXBODY well my car is a daily use car do u recommend it?

[@BREW2LFOXBODY]

@@k9-hero374 I would leave them.

[@jaysonescoe5799]

Ughhhh!!!! Go to order My hat and the color I want is out @the moment. Ya know gotta go red and black cuz.... Dawg Life!!! Yo bro!! When I do order a hat!! I’d be honored if everybody signed it in some way underneath of course!!!!

[@BREW2LFOXBODY]

We just placed another order yesterday! I’d be honored to put some ink on it for you brother! 🙌

[@jaysonescoe5799]

Check orders because I ordered a solid red. But I will order the red/black for sure!!! Awesome bro you guys all Rock!!

[@BREW2LFOXBODY]

I got your order for the solid red brother 👌

[@andrewarnold2696]

Would those just be considered shock mount reinforcements or part of the “torque boxes”?

[@threexxxphat]

Witch shock you using ..i.have a 2015 that I wanna drop

[@kriskeith6979]

hey man I've got a quick question about the rear coil overs, did you have any issues with tail pipe fitment ? Thanks!

[@BREW2LFOXBODY]

I don’t think I had tailpipes on the car after the coilovers. But I’m sure they can be tweaked some to clear

[@kriskeith6979]

@@BREW2LFOXBODY ok yeah I was wondering, been hearing about tailpipe issues. I don't want to go with the dumps. I'm running the Eibach setup from the pro-street coil cover kit and would like to change to the full coilover in the rear

[@springamike]

What size rear tire are you using with the coilovers?

[@Jeremyaker1320]

I’d like to know as well

[@Tigerfire75]

Thunderbirds are the best fox body then the Lincoln Mark