Make ANY FURNITURE in Blender in 15 Minutes

[@Art_foul]

I'm not understanding these comments. I'm less than 2 weeks into blender and could follow it fine and these are some good tips

[@elizabethhammond1348]

Do you think Blender would be good for designing miniature furniture for a laser cutter?

[@bentheultimatelegend]

4 years of Blender and learned so much from this.. Amazing video!

[@alexlarson9866]

I started CADwork in 3D Planner and moved to Sketchup and got really intuned with it. Moving to blender has been a jump since it's in meters and not inches/feet. Finding out that I can do imperial measurements is a GAME changer for continuing this journey. Ill learn metric conversion eventually but this was awesome to learn about in your video!

[@rachapongwatana3868]

Wow! This is a quick and straight to the point and full of amazing Tricks to play with. Amazing Video!

[@PreRendered]

There was a LOT of amazing info in this 16 minute video. Damn great job, you are superb both with Blender and teaching.

[@UnobviousExpand]

Thank you so much! Short video well explained and full of useful things to know. Such goodness is rare. ❤

[@stedbenj]

Wow! Jam packed with info, direct to the point, just awesome. Thank you!

[@jake1689]

Absolutely spectacular tutorial for non-beginners!

[@JayJayGtr]

great tutorial video, quick and simple to follow :D

[@lerenardnoir6498]

HE'S BACK ! Yaaayy

[@FriedrichWeidig]

learned so much from this video! every sentence you say contains some useful information and it's nice that you explain WHY! you use the functions. Thank you alot!

[@bizarremaybe3307]

I learned a lot from this video! ♥♥♥

[@dotcircles9926]

3:01 when adding the solidify modifier, those two back faces created by extruding the back vertices extrude in the z axis of their respective normals, it seems you somehow made them extrude along the global y. When I follow the directions step by step it results in the extruded faces poking out of the leg radius from side view

[@FishaGesit]

thank you !

[@chrystianyaxche5381]

What is the difference between using Edge crease, Edge bevel Weight with the bevel modifier, isn't it better just the support loops and the ctrl b bevel? I ask because of the number of polygons.

[@VertexArcade]

Using Edge Creases and Edge Bevelling are procedural, so instead of using Ctrl+B to bevel the vertices, we use the Bevel modifier and the Edge Bevel Weight to procedurally allow us to control how big the bevels should be. Then at any point we can come back and change how big the bevels are without modifying the mesh

[@89ZY]

wow,,,amazing

[@ladyoftudor6812]

Is this for rendering or game assets?

[@sanchitaruhela2816]

OKAY SO great tutorial it helped me do my work, but it really frustrated me too , its too fast tbh and a lot of things are not explained plus like u say what we have to do after uve done it in flash seconds so that is very veryyyy hard to follow, but ig it may just be a beginner problem

[@z_l_a_m]

3:15 Solidify breaks for me

[@VertexArcade]

What does the Solidify do for you?

[@z_l_a_m]

@@VertexArcade he extrude the two back vertices so that they don't match the card

[@z_l_a_m]

sorry i didn't see your comment @@VertexArcade

[@z_l_a_m]

Now I’ll ask a better question. 3:16 there was a timeskip after that, what did you do during it?

[@VertexArcade]

There was no time skip, all I did was press numpad 3 to look from the side view so that I could add in the bottom part of the chair

[@jackbassett218]

I'm really confused about how you are switching on and off the modifier at 3:50, i've done everything up to that point and I'm quite honestly stumped, i wouldn't say i'm new to blender but i haven't got too much experience any help would be appreciated thanks

[@VertexArcade]

All I'm doing is adding the Subdivision Surface modifier using Keyboard Shortcuts, Ctrl+1(keyboard not numpad) will add the modifier with 1 level of subdivision, Ctrl+2 will add 2 levels and so on!

[@jackbassett218]

thanks!! @@VertexArcade

[@betterthanbaked]

I also got confused, Going from solidify 3:16 to a full wireframe mesh at 3:31, Found a forum where they said object -> Convert -> Mesh. Does the trick but it also converts the mirror :/

[@pattiadamspl]

@@betterthanbaked I also had a problem with understanding what's happened in this part. I figured you need to apply the modifier - you need to check the modifier and use ctrl+A

[@enki313]

might be a long shot but im kind of new to blender and im trying to move just 1 vertex like you did in 2:20 but i can't, it moves the entire shape, any idea what im doing wring?

[@maverickf6787]

What if you dont have a side view of the furniture? I use Ikea alot and they dont have side views

[@VertexArcade]

Unfortunately then you'll just have to roughly match the shapes. You could set up a camera with an image of the chair from an angle and try and match the perspective and that will give you a rough guide

[@DeDebitam]

was good but you have missed so many parts which is unknown for me because im beginner ^^ so the final result is far different

[@alexwaler]

4:52 tells me the issue can be fixed with "holding edge loops". but i can't find this feature. What am i missing?

[@VertexArcade]

Ctrl+R is the shortcut to create an Edge Loop in Blender. Holding Edge Loops is just the term for adding loops close to edges so that any subdivisions don't round edges too much

[@prox4983]

I think to "holding edge loops" you need to create the edge, select it completely and then Ctrl + B

[@TheMraaqib]

Amazing lesson! Your audio is a bit out of sync I feel, you're explaining a step 1-2 seconds after it's done.

[@emanovak5940]

i cant inset circle

[@pedrooliveira6887]

go to edit mode then u can

[@theulfhednar2655]

Kinda hard to keep up with your movement, and I kinda messed up when it comes to the blue part on the coushins. other than that this seems nice. Ps, when mentioning the seems, you go waaay to fast. I end up having to jump back and forth to try and understand what is being said.

[@VertexArcade]

I'll keep that in mind for next time, thanks for the feedback!

[@theulfhednar2655]

@@VertexArcade Np, Not quite done yet, got the materials left. Even though I was a bit rough, A lot of it is still really good. However, just getting compliments won't make one learn anything. Likewise, just comparing my result to yours tells me I gotta work harder. So your tutorials are a big help. Hope you make more great videos, I'll be waiting :D

[@Zyncronz]

this tutoriall is sooo hard to learnnnn

[@dcsteel4959]

Tried on 4.1 blender not even close tried multiple times back and forth checking the steps and still everything is off sadly not even close to the dimensions

[@Emi-Wan]

First step, delete default cube to add a new cube

[@FurryNonsense]

If you're not an experienced Blender user, dont even try keeping up with whatever is going on

[@anothersamurai2609]

too much information in small duration. hard to understand

[@ladyoftudor6812]

What settings do you even have? I cant even drop and drop this image. I cant even import this image into planes. Nothing looks the same. This is for beginners, and I cant even get into the early steps because nothing is the same. I import image as planes and it comes as an Arc and I don't even see the image at all.

[@OomNeil]

this video is not beginner friendly

[@magdomingsorianoflores1976]

Please man, make a real-time tutorial please... 😢

[@Potts2k8]

... I wish _any_ of that made sense 🥲