Su-26 F3P Low Budget Contra Drive Biplane V2 build Video | Tobi-Style

[@ginginthing]

Outstanding slow speed performing aircraft. Best indoor performance I've seen. Incredibly beautiful plane.

[@ralphhowing3473]

Got to love the knife edge, now that's a plane for rainy days!

[@andrewroos6035]

Congratulations, excellent design and construction skills and a lovely little plane. F3P never ceases to amaze me!

[@tobi-style]

Thanks a lot

[@showusyaguppysaustralia1515]

Wowsers this is a fantastic build! I recently started to 'try' make some foam board planes and the amount of detail and the way this model is able to fly so slow absolutely blows my mind!! Fantastic job mate well done 👏

[@bumbleboltfpv3707]

Well done! Holy heck man your engineering and stick control skills are of the chart ^_^

[@tobi-style]

Thank you :)

[@АндрейФ-п4к]

Супер!))) Впервые вижу такое интересное прочтение SU-26)))) Светлана Капанина наверняка удивится и порадуется, если увидит!)) Летает превосходно, очень красивая модель!

[@tobi-style]

I'm sorry, but I can't understand this

[@quadguy1470]

Your building and flying skills are amazing!

[@britinozoz]

WOW.....That had everything that is great about aeromodelling.....

[@tobi-style]

Hey thanks a lot :)

[@ralphhowing3473]

When you finished it just the way you picked her up I could tell that baby was going to fly!!!

[@3h55]

11 Gramm motor/Regler/Propeller!? Soviel wiegt mein servo fürs querruder in meiner edge540...zugegebenermaßen hätte auch ein 7 Gramm servo bei mir gereicht. Sehr gute arbeit beim bau und beim editieren vom video. Top. Gibt ein like

[@tobi-style]

Danke dir :) Ja, die 11 Gramm stimmen. Mit den zwei Motoren hat er für das Abfluggewicht aber viel zu viel Leistung. Für nächste Saison werde ich es mal mit nur einem Motor probieren.

[@divyajnana]

Amazing, lightweight and beautiful build. Not to mention the Superman flying skills. All good!!!

[@slyknezz6862]

It looks like it stops mid flight sometimes! Super stable flight as well. Very nice work!

[@tobi-style]

Hey thanks a lot

[@grumpyjohntxredneckrc6346]

Excellent Build & Precision Flyin! Thanks You Have Given Me Some New Build Ideas On Materials & Techniques...

[@tobi-style]

Hey thanks

[@divyajnana]

This is absolutely fabulous; wonderful engineering

[@tobi-style]

Thank you

[@StasysFPV]

This is more than wonderful. Supper job and skills.

[@tobi-style]

Hey thanks :)

[@OCnStiggs]

New maneuver: Fly at the wall and pull vertical. Land on the wall and hover to a stop. then takeoff. Very cool design and construction techniques.

[@normg2242]

That looks so therapeutic...!

[@tobi-style]

It's also really relaxing to fly :)

[@briancourtice2858]

I got worried when I saw that mini Radian zipping around. It could smash that bipe to pieces. Great design. I really like the contra motors concept.

[@tobi-style]

Yeah, the mini Radian is sometimes a bit scarry, but I try to take care as good a possible that this woun't happen

[@jaqueprevost2708]

Amazing Job man , keep going ! amazing skill

[@tobi-style]

Thanks :)

[@SasquatchPNW]

I love the Slick 580 Scheme on this plane, great video and editing!

[@rcfanaticd.garcia6393]

¡IMPRESIONANTE! Buen trabajo.

[@tobi-style]

Muchas gracias

[@DoHyeon_Hwang]

control skill is really nice wow...

[@tobi-style]

Thanks :)

[@Red20RC]

Seriously impressive building skills! Nice work 😍😎🤩

[@tobi-style]

Hey thanks 😊

[@Peter.Jensen]

Watching this only to enjoy 😊 the marvelous soundtrack at highest volume...

[@tobi-style]

Haha thanks 👍

[@abates3747]

very cool!, particularly using the colour scheme that I designed! :) ...looks like a fun airplane!

[@tobi-style]

Yes, it's a lot of fun. But for next season there're some parts to improve. I didn't knew that you designed it. Great job. I'm loving it on my Slick 580, but also looks really good on shockys :)

[@nickmalone3599]

Amazing, should add a video insert if your hands working the controls.

[@tobi-style]

Hey thanks. The movement of my hands with this plane are not that crazy, pretty slow like the plane itself ;)

[@dkgolfnut]

Wow, Great flying Bro. Th plane is fantastic as well

[@tobi-style]

Hey, thanks a lot

[@geebee3d]

Love it!!! I fly indoor free flight, F1L, Limited Penny Plane, USA rules EZB, and A6, and can absolutely appreciate the work that went into this model. Great build and it looks wonderful in the air.

[@tobi-style]

Hey thanks :) I also appreciate you work with the free flight planes. We once had a guy with one of these in our club. Verry impressive to watch

[@matthewmann8951]

That is sooooo sweet wow all I can say is nice, very nice .happy new year to you and yours.

[@tobi-style]

Thanks a lot, I wish you a happy new year too

[@anthonyfoster7948]

well done on your build, I like how you showed the build and flight

[@jordyrobignon3387]

it's flying SOO slow :o very breathtaking. are there plans of this plane?

[@tobi-style]

I'm sorry, but at the moment I don't have plans for this plane.

[@PauloIrineudeSouza]

@@tobi-style And now, sr. Do you have the plans to sell, please?

[@danielm.3383]

Fliegen in Zeitlupe. Geiles Ding!

[@tobi-style]

Danke dir

[@GerardoC01]

Massima stima per te, sei grande! 👏🏻👏🏻👏🏻

[@rcvg69420]

Looks like a fun model!

[@tobi-style]

Yes it is. A lot of fun to fly with :)

[@rchoper21]

Just stumbled on this video. Awesome design! Love the way it floats in the air. I'd love to see some of your other planes because this one blows me away! Wish I could read the text , youtube should make it possible to translate!

[@tobi-style]

Hey thank you. Videos of my other planes (indoor and outdoor) will follow soon. At the moment, the only way to translate the text is to use an external translator

[@momoseelmann]

Aber hallo wie cool ist das denn !! Weitermachen da geht noch mehr !!

[@tobi-style]

Hey danke :)

[@johngreen8693]

Absolutely fantastic, but so many questions....

[@JimEdmiston]

Very cool build thanks for showing the process. Do you plan on adding any speed brakes for your down lines?

[@powderslinger5968]

Yes! The effect would be complete!

[@jeffersdom]

I Love an Airplane with lots of Air !

[@tobi-style]

Thanks

[@flatheadprints]

very interesting and well done, really enjoyed it.

[@tobi-style]

Thanks a lot

[@aerodrone6344]

Wow! what a fantastic construction and Build! i wonder what program you use for designing the model? great flying anyways!

[@tobi-style]

I did use the CAD from our university, so in my case it's Catia V5. You can also use other programs like AutoCad or Inkscape

[@judechopper]

Damn SIRwtf how lite friggen slow bloody spinning my head frig! Thankyou I'm building now!😅😊😮

[@simont3686]

I saw that intro and subscribed.

[@tobi-style]

Great, I hope you like this channel

[@simont3686]

@@tobi-styleOf course I do.

[@MasboyRC]

This is so cool.. 👍

[@tobi-style]

Hey thanks 😊

[@FlyFreak96]

Sehr geil. Ich habe immer mehr das Gefühl das ich mich wieder mit dem leichtbau beschäftigen muss 🙈

[@tobi-style]

FlyFreak Danke dir😀 Ja der Leichbau ist eine Sache für sich, mach aber auch extrem viel Spaß beim Bauen und Fliegen

[@FlyFreak96]

Ja kann ich mir gut vorstellen. Das sieht bei dir alles so einfach aus😁. Ich muss mal gucken was ich bauen kann( habe leider keine fräse)

[@tobi-style]

@@FlyFreak96 Du kannst sowas auch ohne Fräse bauen, ich hab den ersten F3P Doppeldecker auch komplett per Hand ausgeschnitten. Am Ende dürfte es sogar genau gleich lang dauern, weil beim Fräsen ja noch die ganze Vorbereitung dazukommt und das Fräsen selbst ja auch noch etwas dauert

[@FlyFreak96]

hast du die beiden 1s Lipos parallel oder in reihe gelegt? Ich habe genau das selbe Antriebsset für mein F3p Flieger aber bei 1s reagiert gar nix. Gruß Rolf

[@tobi-style]

Hallo Rolf, ich hab die beiden Akkus in Reihe, also als 2s 150mah verschaltet. Der Motor sollte auch noch mit 1s funktionieren, allerdings läuft der Regler bei 1s nicht mehr

[@robertme9080]

STUNNING !!!!!!

[@tobi-style]

Thanks :)

[@andyschmid7259]

Absoluter Hammer!

[@Eugensdiet]

I'm very impressed. Really neat plane. Are you using differential thrust? Please tell what kind of film you are using.

[@tobi-style]

I tried differential thrust, but becaus the propellers are verry close togther, it hasn't much an effect. The film is called "mylar film" with a thickness of 3 microns

[@Eugensdiet]

@@tobi-style Thanks for the feedback.

[@tomcierijr.1448]

Awesome job...

[@tobi-style]

Thanks

[@powertool4uau]

great build and flying

[@edgeflyer1]

Klasse Tobi, thumbs up :-)

[@tobi-style]

Uwe Grenda Danke dir😊

[@Andyman35uk]

Awesome design but how on earth do you transport this anywhere? It must be so fragile.

[@chriscrawford6245]

Tobi, could you please tell me what are the materials you used for construction (i.e., white board and clear sheet)? Fabulous job!!!

[@창공유랑]

Wonderful!! wow wow wow

[@tobi-style]

Thanks a lot

[@MartyLJ57]

Nice plain. I just don't understand that type stunt flying. Looks to be tail heavy in normal flight.

[@Maxfahrer]

It isn't tail heavy. He is flying in stall thus has a positive angle of attack / slight pitch up.

[@wingnutzster]

“Low budget” where I come from does not cover access to or the use of expensive machinery - live the design and the workmanship though

[@tobi-style]

For me it's kind of low budget, because at your club I can use our whole workshop (CNC included) for just 20€ a year. Besides this I completely understand what you mean. For my first F3P biplane project (kzbin.info/www/bejne/r3WynoRsaseLptU) I did cut out all the pieces by hand. So it's completely possible without CNC

[@briancourtice2858]

@@tobi-style The CNC is nice, but that airplane could be cut out by hand. No big budget machine required.

[@tobi-style]

@@briancourtice2858 Yes you're right

[@erwinbeizeiten1499]

Fantastisch Gewicht Bauausführung Film Flug Nur eine Frage Ich baue meist mit Holz und bin im Vergleich zum Durchschnitt auf andere Art Minimalist. Material Depron?

[@tobi-style]

Hey danke :) Ja genau, das ist Aero-Depron

[@thomasstark5381]

Fantastic airplane

[@jhonepps6061fingers-wild]

great vid whats your motors

[@simcard578]

Did you set up motor brake (in the esc) for vertical upright? The plane is very very slow but not in vertical upright. Is it possibile to slow down the plane when it is in vertical upright manoeuvre?

[@tobi-style]

I didn't set up the brake, because the little propeller don't have much braking force. I try to use my ailerons as a brake

[@donolinger6904]

@@tobi-style - Do they move the normal way, like the would during banking for turns? Or is it in the same direction?

[@ks3mov11]

good job！ nice idea.

[@nx_rc_room]

Sehr Cool! :D

[@tobi-style]

Danke dir :)

Sooooo bad ass, can we get the blueprints for that?

[@tobi-style]

Hey thanks, if I have enought time I'll prepare the plans to be publishable

[@michaelhunermund4257]

Huhu, eine tolle Arbeit!! Kann man den irgendwo nachbauen? Und was brauche ich da für Motoren, Servos und kkus zu? Wäre toll, wenn Sie mir da weiterhelfen. Bin schon lange auf der Suche nach genau solchen Modellen! Liebe Grüße und schöne Feiertage! Michael Hünermund

[@needmoreboost6369]

I’m looking for a motor, servos and radio set or spektrum receiver to start building ultra slow planes like this, any suggestions? Previously I’d just strip micro helicopters for the electronics but a receiver compatible with a spektrum dx6i would be convenient, I’ve got an as3x all in one with a 28mm edf and I’m building a gear reduction to use that motor on a slow pitch prop but it’s still heavy for indoor. Any suggestions would be greatly appreciated.

[@1954charlie]

Super ,super,super!

[@ludwigwenninger6290]

Super Video... Geiles Modell.. Es wäre sehr nett, wenn Du mir zwei Fragen beantworten könntest... Welche Folie verwendest Du .. Kondensatorfolie ? und bespannst Du die Teile beidseitig oder nur auf einer Seite ? Vielen Dank schon mal...

[@tobi-style]

Danke dir :) Ja, es ist Kondensatorfolie oder auch Mylar Folie genannt. Damit bespann ich dann die Teile nur auf einer Seite

[@ludwigwenninger6290]

Cool.. Ich habe nach der Folie gesucht aber nix gefunden.. Welche Stärke verwendest Du und kannst Du einen Tipp geben, wo man diese bekommt ? Danke Dir..

[@tobi-style]

@@ludwigwenninger6290 schau mal hier: fly-scale.de/Kondensatorfolie-Polypropylen-320mm-breit-35lm sonst gibts die auch im Shop von Donatas Pauzuolis, die ist dann etwas dünner und noch minimal leichter

[@captaindronieversefpv]

i am newbie who want learn F3p. i want to ask if you use gyro in this video ? and How to setup the gyro ? i just bough AR3Pro V1 Hobbyeagle .

[@CalvinCai_Frisbee]

AWESOME

[@tobi-style]

Thanks

[@rolandotorrico9624]

What material di you use to build the airframe?

[@Maxfahrer]

It's Depron

[@tobi-style]

It's Aero-Depron covered with mylar film

[@ralphhowing3473]

You can call it "The Gym Flyer".

[@marlonb.8243]

Are there any commercially-made kits available for this class of aerobatic plane? I usually fly outdoors, but I would like to have this type for indoors.

[@wingnutzster]

My German is not so good, what do you cover your models like this in?

[@grumpyjohntxredneckrc6346]

It L@@Ked To Me Like What I Use? Light 3mil Heat Shrink Wrap? For Super Ultra-Lights I Like Using A Cheap Clear Food CLING Wrap It's A Little Thinner...

[@tobi-style]

No problem, I do cover my models with mylar film

[@arifmartoyo]

Thank you....

[@colstace2560]

I just wish you had shown the motors and servos to me that's where the mystery is

[@tobi-style]

There is no mystery about this, you can find all the components in the video description

[@the.hatero]

MUY MUY MUUUY BUENO QUE ARTE TIENES MAN !

[@ruedigerzoll3008]

Super!

[@ashokkumar5581]

Can you provide the plans in whatever format. Dxf, pdf, anything works fine for me.

[@JotaFyer]

Muleke fera de mais ... Monstro

[@tobi-style]

Amigos do JOTAFlyer Muchas gracias😊

[@MikeDavies621]

Is there a plan available for this model ?

[@Lucky32Luke]

Have you thought about it making it FPV? We are talking added 9g weight is huge but is it doable?

[@tobi-style]

Untill now, I didn't thought about making it FPV, but it would be possible. The structure of my plane could handle the 9g pretty easy on the right spots, like on the nose between the propellers

[@Lucky32Luke]

@@tobi-style I build fpv micro quadcopters for a while now and in my field of the hobby it became common to install fpv (tiny 600tvl analogue camera + video transmitter all in 9g runs from 3v-5v on 25mW output) on almost anything moves. I have fpv on my RC car, on a monster truck, on my daughter's RC crawler etc. The range you flying is covered without a problem. The only real investment is a decent analogue fpv goggle (Fatshark; Orqa; SkyZone). Right now the digital HD FPV in this size and weight is not yet ready only from 40g+. Once you transmitting a video signal anyone in that sport arena who turns on a goggle can see and follow what you see in your goggles live without delay! Immersive. I hope you will give it a try but one suggestion: try first in a large environment even if you flying awesome and confident LOS, flying FPV will take a few runs to get used to I am 100% sure but I also pretty confident it will blow your mind too!

[@tobi-style]

@@Lucky32Luke Thanks for your recommendations. I think I'll give it at try, but then with a plane especially designed for FPV and a bit more durable in case of a crash ;)

[@Lucky32Luke]

@@tobi-style Glad if I could help or possibly influenced you joining the FPV community. Your build quality and flying skills will work for you if you ever feel trying quadcopters I know a former heli champion who also happen to be the best in our hobby too in racing. it would be great to see the video you flying ultra light fpv. Dont know anyone who have done it. You could be a pioneer on that I think. Good luck and prepare for take off! ;)

[@lonakanalimasa3139]

Sweet!!!!!

[@stemflite]

How can I learn to build and fly like this?

[@Erichder5te]

Hi Tobi, super spannende Bauweise. Ich Versuch Grad ein Luftschiff in dieser Bauweise zu bauen, hab aber noch kein passendes Material zum bespannen gefunden . Welches hast Du verwendet?

[@tobi-style]

Hi, ich benutze zum bespannen Mylarfolie (auch Kondensatorfolie genannt) mit einer Dicke von 3-3,5µm

[@Erichder5te]

@@tobi-style interessant. Ich hab da nur sone schwere 30g/m² Folie. Kannst Du mir neb Link zu einer Bezugsquelle schicken? Danke

[@tobi-style]

@@Erichder5te Ich hab meine von Fly-Scale: fly-scale.de/Kondensatorfolie-Polypropylen-320mm-breit-35lm Die dünnere, 3 mü dicke, gibts sonst noch bei Donatas Pauzuolis im Onlineshop

[@robertdanzl]

Welches Material ist das weisse Gerüst? und Welche Folien verwendest du du? Gibst den PF Plan schon, wäre otal super!

[@tobi-style]

Hi, das weiße Gerüst ist Aero-Depron und die Folie nennt sich Mylar oder Kondensatorfolie. Den Plan gibt es leider noch nicht

[@robertdanzl]

@@tobi-style danke für die Antwort. Freu mich auf den Plan. Ist das Depron 3mm oder. Ist die Folie selbstklebend

[@tobi-style]

@@robertdanzl Genau, das ist 3mm Depron. Das Gerüst sprühe ich mit Sprühkleber ein, damit die Folie darauf hält. Sieht man auch im Video ;)

[@johnmarktamano8834]

awesome

[@tobi-style]

Thanks

[@Flybrei]

Respekt, echt super gemacht. Tolles Bau-Video, hast du den Flieger selber entwinkelt? 👍 Abo hast du schon.

[@tobi-style]

Flybrei danke dir😊 Ja, der Flieger ist selbst entwickelt

[@Flybrei]

@@tobi-style So ist der noch cooler👍😎

[@Rundumsfliegen]

@Flybrei: du hier?😂 Das beste: ich habe Tobi-Style schonmal in echt getroffen😂👍

[@yevhendriha5477]

Excellent! Can I purchase plane drawings?

[@PauloIrineudeSouza]

Can you share the plans, please?

[@tobi-style]

At the moment I haven't enough time to convert my CAD files into good drawings for everyone, but I plan to do it in the future.

[@PauloIrineudeSouza]

@@tobi-style Thank you!

[@nicholausrudy1831]

How can i get plan of this plane?

[@MrLoveflyer]

Ist es möglich so einen Flieger bei Dir käuflich zu erwerben, und mit was für einem Preis müsste man rechnen??

[@tobi-style]

Leider ist es zzt. nicht möglich so einen Flieger bei mir zu kaufen. Wenn dies allerdings der Fall wäre müsste man mit min. 600€ nur allein an Arbeitskosten rechnen

[@_namenloses_4593]

was für motoren hast du benutzt?

[@petergoldmann1936]

Von wo bekomme ich den Bauplan ?

[@m.s.aviation7065]

Vbar why not spektrum?

[@tobi-style]

This is the JR XG14 radio. It looks a bit like the Vbar, but it isn't

[@joshuaburgess4730]

You selling kits?

[@robot7759]

Q: why cover the body in clear plastic?

[@davidhines7104]

Rob Ot it’s a ultra light that’s cellophane

[@tobi-style]

I did cover it, because it's much lighter. The film is called "mylar film" with a thickness of 3 microns

[@simonje3810]

Hey, hast du eine Fräsdatei für die airbrush Schablonen, bzw. wie hast du die gemacht? Gruß Simon

[@tobi-style]

Hi, ich hab das Design in Inkscape erstellt und dann als DXF exportiert und gefräst. Also zu deiner Frage, ja ich habe eine Fräsdatei für die Schablonen. Grüße Tobi

[@simonje3810]

Tobi-Style ok, vielen dank.😃

[@paolopinkel8288]

Verkaufst du auch die modelle bzw die Bausätze?

[@tobi-style]

Derzeit leider nicht mehr, ich habe es aber wieder vor

[@paolopinkel8288]

Habe defintiv Interesse. Mit wieviel muss man ca rechnen?

[@johnnyllooddte3415]

can i buy one

[@johnnyllooddte3415]

where is the link for the plans

[@tobi-style]

At the moment you can't buy this plane. If I have enought time, I'll prepare the plans to be publishable

[@sueallchin3661]

How do I get one