Making a aluminum shroud core for the AGT Vulcan 3

Hi guys in this one we make a new shroud core for the AGT Vulcan 3, its a little quieter then the original one and has a 1/2 UNF on the end for a mod or muzzle brake.
Sekhmet gauges: 10% off
Code: "SUB12"
www.sekhmetonline.com/?ref=SUB12
Merchandise link:
personalised.clothing/sub12ai...

[@jimihendrix5576]

It's a shame the brown shirts at Airgun Nation forums no longer allow this type of content. Thank you for sharing your beautiful work.

[@sub12airgunners]

Our pleasure thanks for watching

[@Tim_Bassett]

Every time I see your lathe work makes me wished I paid attention at school metalwork classes....outstanding. You could hear the difference in the shroud, as you say though, not a great deal. The felt certainly makes it a thud and deadens it a bit. great work.

[@sub12airgunners]

thanks Tim 😀

[@PaulSmith-jr1qe]

Stunning job as we see you perform on every video, just a shame you don't do custom work for customers. I suspect you would do a much better job than some of the so called tuning come customising experts out there.

[@sub12airgunners]

thank you, we would love to have the time to make custom parts for people but it's just not posable at the moment 😀

[@brynybach7741]

As you say, it's always difficult to record the difference in sound but I would say that (same as with all my same efforts like this) it usually just highlights the hammer/valve noise, making that the loudest noise after. I have often wondered if anyone has made some form of sound absorbing cover for around the hammer/valve area of a air rifle. I know it always sounds louder when out and in use because, especially on a bullpup, it's right next to your ear. Something for you to work on. As usual, another excellent video. 👏 👍

[@sub12airgunners]

you are spot on, we try to quieten down the action with guides and delrin tipped hammer, etc before we do a mod or shroud for this reason but as you say the action always ends up being the loudest part

[@leec8592]

A beautifully made moderator core for the V3. With the silencer attached the V3 is all but silent! Thanks for sharing the video 👍

[@sub12airgunners]

Thanks Lee 😀

[@Adytzu1979]

the best art in airguns, please don't forget what you promised, pressure gauge for the regulator. Greetings

[@sub12airgunners]

we will try 😁😁

[@rizco8543]

The best airgun knowhow channel. TX. Great job as always.

[@sub12airgunners]

thank you

[@marouaneladjel1907]

you're a pcp engineer it's sure to every one I'm still shocked bravo bravo bravo

[@sub12airgunners]

thank you very much 😀😀

[@Marcus1954s]

Thanks again for the fantastic depth and range of advice given here, both in terms of air gunning and engineering.

[@sub12airgunners]

thank you and thanks for taking the time to comment 👍👍

[@three-phase562]

Moderator looks great, very well machined as always. Will be interesting to see what it looks like when the muzzle brake is completed. 👍👍

[@sub12airgunners]

Thanks yes we are hoping it adds to the overall look

[@philbate5555]

Perfection just comes natural to you jake and its visiblein each and everyone of you're videos. absolutely spot on .

[@sub12airgunners]

thanks Phil 😀😀

[@rayingles1]

Amazing piece of work

[@sub12airgunners]

Thank you! Cheers

[@salhameli765]

@@sub12airgunners how can I contact you ? Email number

[@2speed818]

As always very interesting, really enjoyed it

[@sub12airgunners]

Glad you enjoyed it, thank you

[@lankymk]

Awesome machining as always. It definitely sounded different IMO, new core without the felt sounded best imo.

[@sub12airgunners]

we don't really do the felt normally, as long as it takes the bark out we are happy but it does make it a little quieter

[@RG-oj8br]

My favorite airgun channel! Thank you for your content.

[@sub12airgunners]

Wow, thanks glad you like it thanks for watching👍

[@eoinwestman6222]

Ah lads this quality of work is fantastic. Love the videos. Great to see the effort and passion in your work. I’ll catch up with at the northern shooting show again. The gun is extremely quiet all you can hear is the action imho.

[@sub12airgunners]

Hello mate yes pop over and say hello 👍👍

[@eoinwestman6222]

@@sub12airgunners absolutely. See you there

[@stephenwallace2423]

Fascinating process and excellent work as always!

[@sub12airgunners]

Thank you! Cheers

[@aaablablablabla8948]

I just think it's wonderful how you do that with the explanation just supper

[@sub12airgunners]

thanks very much 😀😀

[@casperboo5465]

Great work as always Jeff, very informative and help full, great watch Cheers 👌👌👌👌👍👍👍👍👍👍👍👍👍

[@sub12airgunners]

Glad you enjoyed it

[@kempy9584]

Another excellent video 👍🏻👍🏻👌🏻 Can’t wait for the alpha wolf videos😎

[@sub12airgunners]

Thank you 😀

[@kempy9584]

Any news on the carbon cocking handles 😎

[@iangoodsell3257]

Lovely job Jake

[@sub12airgunners]

thanks Ian 😀

[@jonathankrum3016]

Amazing work as always sir!

[@sub12airgunners]

Thank you! Cheers

[@lisawood516]

Really enjoy your machining vids. Brilliant engineering skills. 😊😊😊

[@sub12airgunners]

Glad you like them!

[@skydonkey245]

Always enjoy the metal work. awesome work as usual..

[@sub12airgunners]

Thank you! Cheers

[@spyderdryverlee4581]

Excellent work guys. I made a similar device for my latest build but for inside the mod. It's very quiet.

[@sub12airgunners]

nice one 👍 thanks for watching

[@giancalisthenics1845]

Vi seguo da un po', perché anche io sono possessore di un AGT Vulcan 3, complimenti 👏🔝 per tutti i lavori e miglioramenti che effettuate sul fucile, purtroppo nn tutti sono in grado di lavorare al tornio come fate voi, sarebbe bello se anche noi potessimo acquistare i pezzi creati da voi. Saluti dall'Italia

[@sub12airgunners]

thank you fro watching 👍 we love to be able to make the bits available to people we just don't have the time or machines

[@FreeFarmPestControlUK]

Great watch and as ever watched every second 👍 I really enjoyed this one and I think the results sum it up nicely and literally speak for themselves 💪 Well done 👏 another improvement to a cracking rifle 🤌 just goes to show perfection can be perfected 😊 Nice one jeff/jake 🙌 can't wait for the next one 👌 atb

[@sub12airgunners]

thanks you glad people like the machining vids 😀 thanks for watching and taking the time to comment 👍

[@crazycressy7986]

Sweet job ,hopefully you can do something similar to the Vixen. I need to blow the dust off my lathe lol

[@sub12airgunners]

thanks 👍

[@brorjordas1979]

Way good n nice work!👍🏻👍🏻

[@sub12airgunners]

Thank you! Cheers!

[@leecolclough2492]

Been waiting to watch this excellent as always extremely informative and great content my dad had his moderators made by hand for his powder burners at least six different calibers some very hot some not in fps i only shoot sub 12 so to seebthis level of lets face it artistry just wish i had the tooling proper lathe work that is grand to see cheers for the video it was a agood watch 👍👍😂

[@sub12airgunners]

thank you very much gad you liked it 👍

[@Piupiu68az]

I'm not amused by how well you manage them, that you don't test them with some sound meter and also with pellets, greetings and have a good day. It's just that I'm embarrassed to mess with them

[@sub12airgunners]

thanks for watching

[@user-uj2nc7eg5f]

Hi Master Chief of airgunology. Good work keep it up more. Regard

[@sub12airgunners]

Many thanks

[@johndanville6643]

Your good dam you 😊

[@sub12airgunners]

Appreciate it thanks for watching 😀

[@myadventureman2636]

Amazing gun

[@sub12airgunners]

thanks for watching

[@mongieman]

wow well good

[@sub12airgunners]

Many many thanks

[@jeffhello1444]

nice one

[@sub12airgunners]

Thanks for the visit

[@crazycressy7986]

I was thinking when i get my Vixen short ,i was going to line the inside of the sroud to see if it takes out the bark ,do you think this will work or what would ypu do ?

[@sub12airgunners]

yes that does help and works very well on some guns 😀

[@redgum1340]

Lots of work but it's worth it. 🙂

[@sub12airgunners]

thank you

[@arpapatiung5299]

I like air rifles. and I am very happy with your video, but unfortunately there is no Indonesian language, so I just enjoy the video without understanding your regrets. Please activate Indonesian so I can understand the details of your explanation. Sorry, I made this with the help of Google Translate.

[@xuanphuongtv2348]

Xin lỗi bạn có thể cho tôi hỏi đường kính bên trong của lỗ giảm thanh cho cỡ đạn 5.5mm hoặc 4.5mm là bao nhiêu để đảm bảo triệt âm tốt nhất được không ạ

[@sub12airgunners]

4.5 we use 6mm 5.5 we use 7mm that gives good suppression and clearance to minimise the chance of clipping 👍

[@xuanphuongtv2348]

@@sub12airgunners thanhyou 🥰🥰🥰

[@julianchambers8372]

Hi, good video mate. I know its difficult but the noise level didn`t seem much difference. Have you ang drawings available for making a moderator.?

[@sub12airgunners]

it just doesn't show up on the vids we was going to get a meter just haven't got round to it yet, sorry this one was done off the cuff so no drawings

[@crazycressy7986]

Listen with headphones ,the mod sounds a lot quieter

[@julianchambers8372]

Hi mate, will do. I have a Weihrauch carbine with a integral moderator which has failed. i1m going to have ago at making the internals. Thanks regards Julian

[@crazycressy7986]

@julianchambers8372 just use curling rollers ,felt, and washers ,I've done the same to my 97k ,but being a springer, you can't really tell ,but I've also fitted a stainless steel piston spring sleeve and the twang is not as bad but I've only put 8 pellets through the new gun lol ,it needs running in

[@julianchambers8372]

@@crazycressy7986 Brilliant idea mate I`ll give it a try. Thanks J

[@timharrison3056]

What Scope are you using there Jeff?

[@sub12airgunners]

that is the element titan 5-25x56 ffp it's a heavy but a great scope

[@mimetype]

What's UNF stand for and what's the point of a shroud?

[@sub12airgunners]

UNF stand for Unified Fine just a thread type, the shroud is just a container for the pressure wave that leaves the barrel of a pcp when fired, it slows the wave down and restricts the expansion this helps to make less of a bang

[@mimetype]

@@sub12airgunners Thanks very much.

[@vagnerdainvencaolino7388]

Hi, my friend, I have a good job, I would like to know if there is a way to improve the functioning of the side lever, why is it so heavy to assemble? very brave

[@sub12airgunners]

thanks for watching we will have a look 👍

[@vagnerdainvencaolino7388]

Do you think, in general, that its regulator is good, or not? What about the human regulator?

[@deanpike8376]

Just converted my HW100 to buddy bottle and form stock but the supplied shroud is not the best, movement after a few shots its held in place with a grub screw, poor really. Do you know of anyone that could design a better shroud that will enable me to fit a moderator on the end as well. I have taken the shroud off now and I am using just a Wierhauch moderator, but the gap between barrel and bottle spoils it a bit.

[@sub12airgunners]

yes never liked the grub screw idea on shrouds or mods, you could have a look on air gun forum there a few shroud/mod makers on there

[@deanpike8376]

@@sub12airgunners Thank you for the reply lad

[@xuanphuongtv2348]

Sản phẩm tốt đã có mặt trên thị trường amazon chưa ạ

[@sub12airgunners]

no sorry

[@billmasen3923]

Many of us Airgunners would be royaly screwed with your video output.

[@sub12airgunners]

we are glad it helps people 👍

[@airtechregulators4037]

they make lathes with coolant pumps now,😂

[@sub12airgunners]

our one has but the pump has packed up on it so a frits bottle is

[@dnap1245]

Amazing engineers

[@sub12airgunners]

thank you 😀