Shortening the FX DRS

[@philipgamble7917]

Watch the Joe Pie video on threading upside down (start the threat in the bore and it feeds out). It's a game changer for internal threads, takes all the stress out of it.

[@TribbleDude]

Sounds obvious but I didn't think of that. Thank you.

[@three-phase562]

That Sabre Tactical stock does look very nice. Great to watch the machining of the barrel and cylinder, thanks for posting.

[@sub12airgunners]

thank you and thanks for watching 🙏

[@Lostin2024]

Wow! This was brilliant to watch. Something mesmerizing about lathe work, especially if it’s done by someone with your skill level.

[@sub12airgunners]

thank you and thanks for watching 🙏

[@Kimsaile]

I can't believe it, your dexterity is incredible...

[@sub12airgunners]

thank you 🙏

[@2speed818]

Another 10 on the video my friend and the machine work amazing 👏👏

[@sub12airgunners]

thank you and thanks for watching 🙏

[@krisgater6891]

Id love to buy one of those DRS rifles off you.. great video again..

[@sub12airgunners]

they are just one off's it will get sold when we have finished but they is a few names down for it now

[@TheWelshman50]

Think you should sell the mods as there would be loads of people looking to buy

[@sub12airgunners]

we do some but we just don't get time to make them all 😀

[@philbate5555]

Brilliant jake absolutely brilliant as always mate 👍

[@sub12airgunners]

Thank you Cheers Phil

[@Tim_Bassett]

nice video and its really good to see how stuff is machined and the work / effort that goes into it. The rifle is now looking very nice, although i am still not convinced by the larger plenum :-) The bronze chassis is lovely. keep up the good work.

[@sub12airgunners]

thanks Tim 👍

[@phillipward4862]

Your machining skills are incredible amazing to watch 👍

[@sub12airgunners]

thank you and thanks for watching 🙏

[@Tunnelrat6666]

Love watching machining videos.

[@sub12airgunners]

thank you glad you like them 😀

[@lisawood516]

Great skills! looks really nice.

[@sub12airgunners]

Thank you! Cheers!

[@paulspeller968]

wow that look 👀 is stunning mate . right up my street . great job . that stock is excellent

[@sub12airgunners]

thanks mate it looks just right now with the mod on IMO👌

[@MrBoab67]

very interesting video rifle looks great in that chassis

[@sub12airgunners]

thank you and thanks for watching 🙏

[@jasonmajeika1266]

Cracking looking bit of kit !!

[@sub12airgunners]

thank you and thanks for watching 🙏

[@briancare1]

That’s what im talking about. I prefer a folding buttstock. Another great craftsmanship. 👍👌👊🙌

[@sub12airgunners]

thank you and thanks for watching 🙏

[@EdBraunbeck]

I love these videos! They are so relaxing to watch but maybe I'm weird. :)

[@sub12airgunners]

Glad you like them!

[@markrhodes5474]

Top quality craftsmanship 👍

[@sub12airgunners]

thank you and thanks for watching 🙏

[@FreeFarmPestControlUK]

Absolutely stunning mate ❤😍 👏👏🙌🙌 As ever excellent work, great video and something thats truly unique, just when you think it can't get any better it does 💪 very well done indeed. atb

[@sub12airgunners]

Thank you very much 👍

[@chrisw3212]

Nice job mate. Why did you opt for a new transfer transport port and the extra machining on the barrel opposed to parting and re-crownig? Rather than adjusting air velocities via the reg and hammer spring/weight im genuinely intrested. Thanks again

[@sub12airgunners]

thanks for watching 😀 we went for the larger port so we could back off the H/S a little and we didn't have a big jump in fps between light and heavy pellets👍 the barrel was a good one so we wanted to keep the choke if it wasn't that good we would have just chopped it off to save some work 😁

[@sebastiang6410]

Nice work! Does the saber chassis allow hammer spring adjustment without removing stock?

[@sub12airgunners]

not the SB one i think you can with the MDT chassis

[@davidbarker3455]

Outstanding. Great skills.

[@sub12airgunners]

thank you and thanks for watching 🙏

[@rayingles1]

Interesting could watch all day

[@sub12airgunners]

thank you and thanks for watching 🙏

[@stevenwhitfield8900]

Had you thought about comparing the DRS against the original Snowpeak M30B and seeing if that particular rifle , at half price, could match up with a little tuning, not all the changes you made to the DRS after you got it ?

[@kareemancher]

I know that you have shorten the air cyclinder but coukd you make a larger one to accept bigger barrel I cant seem to find the 700 air tube anywhere

[@memememe2674]

You mention 780 fps for jsb 8.44 pellets. Do you work with this pellet first then check others for over power,bismags always put mine over with 8.44 set around 770 to 780

[@icuppu2]

whats your shot count from full fill down t6o reg pressure?

[@memememe2674]

​@@icuppu2 agt vixen, 120 shoots from 110 bar use. Down to 100bar in bottle. I know it's not the same rifle but must work on sane principle quoting 1 pellet?

[@sub12airgunners]

we test with jsb 10.34 they are about the most efficient pellet and make sure it's under with them

[@chrisfigueroa3361]

WOW looks awesome nice nice job thanks for sharing be safe buddy 💯

[@sub12airgunners]

thank you and thanks for watching 🙏

[@PaulSmith-jr1qe]

Hi, Is there enough room inside the chassis for the match trigger ?

[@sub12airgunners]

Hi no we had to mod the match trigger to get it to fit, but it will go with a little tinkering

[@PaulSmith-jr1qe]

@@sub12airgunners Lets hope when the DRS match trigger comes out it will go straight in.

[@mikebird8290]

Thanks for sharing. your a clever man 🎯🇬🇧

[@sub12airgunners]

thank you and thanks for watching 🙏

[@GrahamHenderson25x]

looks mint shagga! 👌

[@garydaubney4025]

I LOVE IT HOW YOUR COMMENT GETS A "TRANSLATE INTO ENGLISH" MESSAGE... HA CLASS

[@sub12airgunners]

thank you 👍

[@sub12airgunners]

🤣

[@brorjordas1979]

Sweet! 👍🏻

[@sub12airgunners]

thank you and thanks for watching 🙏

[@mutasimaldory]

Great work, as always! A quick clarification though, was this done purely for the aesthetics and "because you can" or was there a functional reason that I missed..?

[@sub12airgunners]

it was just for the look really, it's a bit long with a mod on the standard gun and it really does need the mod as it has a real bark without it

[@JayCole37]

Nice works 🙌🏽🙌🏽🙌🏽

[@sub12airgunners]

thank you and thanks for watching 🙏

[@MArk19745-i]

Whats in that box section on the stock in front of the trigger?...

[@sub12airgunners]

that is the plenum 😀

[@MArk19745-i]

@sub12airgunners I was thinking plenum and or regulator. I thought probably wrong though but it wasn't was it. Cheers

[@ads3453]

Wasn't someone 3d printing a different magazine which wasn't super tight like the official ones ? I definitely remember seeing others using a different mag which was apparently better.

[@Pitsy]

Would be very interested in those

[@kempy9584]

Nice looks savage 👍🏻👍🏻👍🏻

[@sub12airgunners]

thank you and thanks for watching 🙏

[@huntersdiary]

amazing mate

[@sub12airgunners]

Thank you! Cheers!

[@YeibonYe]

is it not a m30x 1?

[@myadventureman2636]

😊❤ Perfect

[@sub12airgunners]

thank you and thanks for watching 🙏

[@aldocuevas3521]

Beautiful but crazy expensive

[@sub12airgunners]

thank you, yes not cheep 👍

[@mrm3e46]

Do you sell a barrel??

[@sub12airgunners]

Hi sorry no we don't sell them

[@mrm3e46]

@@sub12airgunners oki thanks

[@jeffhello1444]

nice 😁😁

[@sub12airgunners]

😁

[@jp8351]

Nica a micro carabine DRS 😁

[@sub12airgunners]

thank you and thanks for watching 🙏

[@offroadfreak8582]

Why does your Rolex not have Rolex branding on the dial? Is it like an unbranded fake version?

[@sub12airgunners]

it's because it's not a Rolex it's a Seiko 😁

[@offroadfreak8582]

@@sub12airgunnersreally? There appears to be a Rolex crown on the clasp.

[@Piupiu68az]

😳

[@alanmullock381]

And 'ere's me wiv me 'acksaw and a power file😂👍👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎😎😎😎😎

[@sub12airgunners]

🤣🤣 thank you

[@nicholasrichards2402]

Looks like a child toy gun.

[@wellyliu7087]

126610LV