SUBARU Forester Headlamps- REPLACEMENT & AIMING!

[@EasyFixShaun]

*_Wizard MUST SEE Timing belt trick for Subaru:_* kzbin.info/www/bejne/jXi9gIuoftZlh5o *_Best Subaru tool for Impossible Rear Wheel Bearings:_* kzbin.info/www/bejne/m3zUiqeDmdGDj9E *_New sway bar link video_* kzbin.info/www/bejne/ZoSbe3WblM-hbMk

[@cleverbyhalfproductions3004]

Worked like a charm! I had to figure out a few of the clips on my own, but, man, did this help! Did the whole thing without a lift in under an hour.

[@EasyFixShaun]

Excellent! Nice job😀🔧

[@swampfox1171]

Best video on this topic I found, by far. Best camera work and explanations. Minor request: show the headlamp adjustments on the lamps themselves, other than that perfect..

[@EasyFixShaun]

Thanks Jim! I’m really glad you liked it. Sorry about the headlamp adjustment missing section. I’m working on being more comprehensive in my videos. Have a great day 😃

[@patrickhayes1004]

Concise yet complete across all phases of installation. Thanks for an easy to follow how-to.

[@EasyFixShaun]

You are welcome! Thanks a lot for the comment.

[@LeTripNC]

Ty man you are a saver ! 21yo got a forester , this car is a fcking dream ! goes everywhere

[@EasyFixShaun]

Awsome! Subarus are incredibly agile and simple durable vehicles 😀😀

[@LeTripNC]

@@EasyFixShaun Do you got advices for timing belt or anything? when i floor it it takes 1 / 2 sec to rev up and finally going faster. i got a power prob i used to reach 180 km/h not its 150/160 max, my steering wheel shakes while driving fast. CD reader is not powerful enough to suckthe cd in. and many more probs aha. i take every piece of advice u can give me aha, Thanks !

[@EasyFixShaun]

The translation is hard to understand but i think i know what you mean. If you suspect the engine timing may be off, i would suggest removing the engine front cover and inspect timing marks to see if everything is correct. That is the best way to verify 😀

[@IgnazSouza]

Thank you. I need to replace both my forester's headlights and bumper cover and you just showed how to do it here.

[@EasyFixShaun]

_Excellent! Let me know how your project goes please._

[@nathansmith3401]

Fantastic video. i wish i had found it 6 months ago, might have saved some anxiety.

[@EasyFixShaun]

Thanks! I am fast no matter how long it takes. 😀 Sorry I couldn't get this video to you sooner!

[@Ziip47]

Any suggestions on audjustments when the pair being replaced are not working?

[@EasyFixShaun]

Light bulbs are not lighting up?

[@mercenaryconstruction1628]

Good video. Those pin clips behind the fender are a bugger to get out.

[@EasyFixShaun]

You are so correct! No problem, glad to help 😃

[@edwardhosken3539]

Do you recall what size the four headlight bulbs are? Going to take some tools when I visit my daughter and don’t want to forget the most important one. Thank you.

[@EasyFixShaun]

9005 and H1 bulbs on each side. Good luck with your project!

[@edwardhosken3539]

Sorry, I meant to ask what size the bolts are. Thanks.

[@EasyFixShaun]

I am not sure on that.

[@bwest6275]

Super helpful and clear, thank you 👍

[@EasyFixShaun]

Thank you! No problem. Glad to help! 😀🔧

[@tamaravillarroelmoggiano6599]

Hi, Small question, i need to change only the inside light/ bulb that is out of light. I have the replacement.... is doable for a non car person? do you have any do and donts?

[@EasyFixShaun]

Hi. You can replace all of the bulbs without removing the lamp no problem 😁

[@muddywaters-c6l]

I GOT THE SAME ISSUE SAME SIDE DAMN THATS A LOT JUST TO GET TO THE HEADLIGHT

[@EasyFixShaun]

Agree. Its crazy. If you do these lights everyday you can get em in and out fast. But if it's the first time, take your time. Removing the bumper is very doable but awkward and dealing with a lot of plastic that can break. Also you want to be warm so the plastic isn't brittle 😃

[@HawkGTboy]

God I wish I had a garage/workspace like this. I need to do this job on my Forester but I’ll be doing it outdoors. :(

[@EasyFixShaun]

It does help to have heat and lights for sure. You will get there. I've been there too. It's harder outside but it can be done. Do it when it's warm out if you can, that will help the plastic to not break😀🔧

[@its_me_voltron6394]

You did so much work

[@EasyFixShaun]

Yup bumper removal for headlamps is kinda crazy but normal now. 😃

[@Cubanlu718]

Very helpful, thank you

[@EasyFixShaun]

Glad it was helpful! 😀😀

[@sdold]

Great video, but man, that music is loud! Thanks for posting. Liked.

[@EasyFixShaun]

Sorry about the audio levels. I am working on that. Did you get your headlights installed?

[@sdold]

Not yet, I haven’t bought the new ones yet, I wanted to see what kind of a job it would be to replace them. I opened up the rear access hole and warmed them up for a while to let the water evaporate. For a trip I am taking tomorrow through a lot of rain I will put a strip of packing tape across the top and see if it keeps the water out. That Top seam seems to be where it is coming in.

[@EasyFixShaun]

@@sdold That is a great idea! Good luck, keep me posted :)

[@sdold]

The packing tape didn't help. I sealed the top edge really well too, so I don't think that's where it is coming in. It might be coming in the 1/16" drain holes I drilled in the bottoms of the lenses. I'll cover the holes next time I have a chance to dry them out. I never thought I'd be this cheap.

[@EasyFixShaun]

Bummer man. I wonder where the heck the water is coming in? I don’t blame you for trying. Cheap fixes are the best!

[@Maga1v3r]

Nice video! I want to buy 4 LEDs for my Subie Forester 2007 but I don't know what type of connectors I need in order to connect them properly. I wanna skip the part of remove the whole headlights out and just to replace the bulbs with new LEDs . I think on of them should work, type 9005 or type H11 Can u help me?

[@EasyFixShaun]

Yup. There are lots of manufacturers making led light conversion bulbs. Some are good. Some are not. I’ve had good luck and bad luck. Bad luck usually means you have to purchase another brand and replace the lights all over again. As far as looking up the right part start with your bulb number that you want to replace and buy the bulbs to convert. You may not want to buy the cheapest kit. The best kits are usually a little more money. You get what you pay for kind of thing. There is a lot of junk available. Take your time and select something that you think is going to last.

[@FishinWithJoeG]

Seems like a lot more work than I realized I may have to pay someone to replace mine

[@EasyFixShaun]

Sorry it didn't work out. Pulling a bumper is always a tough project for me too😃

[@davidtaylor2455]

How long does the whole process take? Thanks.

[@EasyFixShaun]

1 hour. But if it is your first time plan 2/3 hours just to be safe 😀🔧

[@cm4936]

Thanks👍

[@EasyFixShaun]

Thank you for watching 😀

[@firebirdnewt]

What is the name of the tool you used t remove the plastic clips?

[@EasyFixShaun]

ATD 8579. I think there is a link below the video in the description. Gear wrench also make a set of two or three pliers.

[@electricjellyfish375]

Thank you. Very informative video. Well done.

[@EasyFixShaun]

No problem! Thank you 😃

[@patrickmercado5284]

There is gonna be a couple clips ……. and video jumps past an important fastener.

[@EasyFixShaun]

Im pretty sure i showed all the fasteners. Which one did I miss?

[@patrickmercado5284]

That sneaky one up under the inner fender well. Plus it is a tough one to access by just turning the wheel. I snapped a picture of it simply to see what I was dealing with. layed on my back, shut my eyes and did by feel in the dark no less !

[@EasyFixShaun]

I did remove it during the time lapse portion of the video but failed to point it out. Sorry about that. I don't know how i missed that. My apologies 😀🔧

[@PowUp10]

Are the sports model headlights interchangeable with this model?

[@EasyFixShaun]

I think so. But please don’t quote me on that. I believe they all fit the same.

[@PowUp10]

@@EasyFixShaun I ordered some, will let you know!

[@EasyFixShaun]

Good luck. I will feel terrible if I’m wrong.

[@PowUp10]

@@EasyFixShaun lol no worries, I looked at a ton of photos and all the mounting points look the exact same

[@EasyFixShaun]

Ok I’m glad you checked it out!😀

[@jareddoubleyou]

So we have to remove the bumper and the whole light casing and fuss with all these screws, tabs, and steps just to change a lightbulb? That seems crazy. I've changed headlights in sedans (Hyundai, Toyota) in 15 minutes just by going in behind the light. Is this class/size of vehicle just that much more complicated? This seems like something that would take me way too long and I'd definitely still screw up. Hmm... 🤔

[@EasyFixShaun]

Ya make sure it's not cold out, stuff will break. It's not too bad. It should not be necessary for headlights, kinda too bad this is done. They made this normal on most cars now. 😃

[@FernandoFlores-zu9px]

Any way to fix the water ?

[@EasyFixShaun]

There are some ways to remove the lamp and "un-bake" the seals for disassembly in your home oven. Pretty slick. Although I must admit I have never done that. I replace the lamps only. Much faster and easier. Check out some videos on you tube on that. You should be able to find some 😀

[@barbacor]

What bulb size is that ?

[@EasyFixShaun]

Here is a link to amazon for the 9003 bulb! www.amazon.com/Philips-Standard-Halogen-Replacement-Headlight/dp/B00Y9VPK4W?crid=WG87YZRPS03U&keywords=2005+subaru+forester+headlamp+bulb&qid=1666700261&replacementKeywords=headlamp+bulb&sprefix=2005+subaru+forester+headlamp+bulb%2Caps%2C95&sr=8-4&vehicle=2005-13-57------------&vehicleName=2005+Subaru+Forester&linkCode=sl1&tag=easyfixplusam-20&linkId=55f6e6c298c83a01dea5acd1fadbeb59&language=en_US&ref_=as_li_ss_tl

[@marigoldman]

What are they charging you for the headlights there (U.S. I guess)? In Australia the Subaru dealership charge $950!! For ONE!

[@EasyFixShaun]

Seems like 500-600 per lamp here. I wonder why its such a price difference?

[@marigoldman]

Got a replica headlight for $300 new. Will definitely use this vid to help me out today. Cheers

[@EasyFixShaun]

Nice. Ya sometimes that's the best option. Good luck! Cheers 😀🔧

[@HumphreyMurray]

Great video for the replacement! Has anybody had any success at repairing the water leaks and cleaning out the inside stains left by the water buildup?

[@Truthseeking]

Farkkkk that a lot of work

[@EasyFixShaun]

It was. But i think to do it a second time would be much easier. Really want to take your time the first try to get the hang of it 😀🔧🔧

[@pamelayounger4247]

How much to do this installation?

[@EasyFixShaun]

I would expect a repair shop to qoute at least a couple hours for the replacement of both lamps. Multiply that by their labor rate. I would say 100-200 roughly.

[@pamelayounger4247]

Easy Fix thank you! They -Subaru sure didn't make it simple did they? I replaced my old 2001 Mustang headlights assembly myself I was impressed & surprised! But I wouldn't even think about taking a bumper off!😬 You made it look easy but.... do you have any recommendations brands, websites etc for the best most reasonable reputable companies to get the whole headlight assemblies for both sides? If I gotta spend that much for installation I can't spend an arm and a leg for the parts but I want them to last! I have a 2007 Subaru Forester that I plan on keeping till the wheels fall off! Also, any suggestions for the type of bulbs led, halogen, etc? Both of the original covers are hazed and the passengers side is covered inside with condensation really bad the low beam on that side has stopped burning not sure if it's just a burnout bulb or because of the condensation. Am weighing weather I need to replace both sides of bulbs or replace the whole housing on both sides. Any thoughts? Thank you for your response, I appreciate it!

[@EasyFixShaun]

No problem. They whole bumper coming off for lamps is a real bummer! You can replace them yourself though. Once the bumper is removed they are easy. As far as recommended manufacturer.....aftermarket will be the most affordable and look great initially. They are made in china usually. Sometimes they get water inside of them within a year, which is disappointing. I have had to replace them twice, on several vehicles. The best parts, will no doubt be from Subaru. I don't know the cost but I know they will last forever. So if you are keeping your car forever go with Subaru. That way you will only need to do it once. For bulbs, Led bulbs seem to be bright. They are almost too bright! You can find those on ebay and amazon. Usually any lamp that you buy will come with standard lamps in them.

[@pamelayounger4247]

Easy Fix thank you! Thanks for the info I guess the aftermarket parts are gonna be cheaper but if they don't last then you may as well spent the extra $$ and get the Subaru parts, saw another video just now on here and this guys light went out - cover didn't look to have condensation in it but he figured out the ballast had water in it so I guess that's another possible that could cause issues? Again thanks I'd really like the look of the new assembly but at possibly $300 for parts and another 2-300 for labor it's not a cheap fix!!🙄

[@EasyFixShaun]

I agree. Ya it’s a bummer on the cost. But you will see much better! 😀

[@alexanderSydneyOz]

thanks but why do youtubers insist on putting music on their videos? This is utterly unbearable. But even if I liked it, *most* people who watch some video are going to dislike the music, whatever it is.

[@EasyFixShaun]

Sorry about that.

[@kevanlewis9063]

I need a pair of light where can I get

[@EasyFixShaun]

I would try ebay. I think mine came from AM Autoparts. Let me know if you can't find them!

[@EasyFixShaun]

Don't forget to subscribe 😉

[@msmcneill314]

That was an expensive fix, all you needed to do was top off the headlight fluid, it was obviously low. Serious tho, I'm thinking of replacing mine. Tried the whole buffing thing to fix the oxidation haze and its back a year later. I'll be referencing this video.

[@EasyFixShaun]

Hahaha! Thank you!

[@juicycle]

@@EasyFixShaun - the ginger man smashed thumb , eh? perfect . thanks. clearcoat after the polish! wax; baby oil. keep the O2 away.

[@EasyFixShaun]

Haha yup!😀🔧

[@pyrojason]

Gingerly...Smashed.. Like..

[@EasyFixShaun]

Hahahaha! represent 😄