Subaru Outback replacing the rear brake pads and rotors

[@saralincoln1005]

Hey man I appreciate the video. I had to do a complete break and rotor change on my outback and you've helped tremendously.

[@guitarded10]

The fuckin’ parking break. Thank you

[@Sunnybrook-69]

Thank you! I needed this so much!

[@boatfriberg]

Thank you for the video. It was very helpful. Unfortunately our ABS light came on after we changed the rear pads and the rotors. Do you have any ideas what may have caused the light to come on? We have a 2002 Subaru Outback. Thank you for any assistance,

[@YourCarGuyDR]

The abs sensors are on the hub close to the brakes. I would check to make sure the wiring did not get damaged during the repair.

[@themechanic4222]

This is when Milwaukee angle wrench comes handy 😂

[@Blanco_SubieForester]

After doing all that do you need to bleed the breaks or no? Thanks

[@YourCarGuyDR]

No, you do not need to bleed the brakes.

[@Blanco_SubieForester]

@@YourCarGuyDR got it! Thanks

[@GlycerinZ]

Only need to bleed the brakes if you replace the caliper!

[@chriswagner3963]

What size are the bolts you used to get the rotor off

[@YourCarGuyDR]

Chris Wagner I believe those ones are m10/ 1.00

[@Chef_602]

It should be 14mm, Source: Haynes Auto Repair Guide

[@maccentric]

I read elsewhere 8mm/1.256 pitch. Apparently you can borrow some from your radiator mount

[@OutandAboutwithTrev]

The lubricant will help them go in a bit more nicer....who would have thought!!!! also -- that's what she said!!!!