Subaru WRX Fake Bee R Rev Limiter!

[@eflem7708]

We the people are gonna need a longer video of what different settings do on that puppy. Props for going against the grain and trying a knockoff! I almost did at one point but I pussed out and sold it

[@eflem7708]

I want one basically for the sole purpose of being a dickhead and blasting flames at people who get too close to me at stop lights. Well that and an ignition cut launch control would spool more boost on my fp blue than my fuel cut lc

[@NickDemers-rh6dw]

@@eflem7708 Thats the only reason to get one!

[@eflem7708]

But for reals. We need more videos on different settings. Also is your car painted, wrapped, or plasti dipped

[@NickDemers-rh6dw]

@@eflem7708 All painted and I'll see about another vid

[@eflem7708]

Rustoleum smoke grey?

[@UnstableAdrianHD]

bro's car actually shitted

[@steezc4530]

You should probably get that looked at.

[@NickDemers-rh6dw]

Blew some packing out I know lmao

[@commentnoises5751]

Nick Demers looool wtf

[@istvanilosvai2962]

@@NickDemers-rh6dw was it part of the muffler or the cat?

[@NickDemers-rh6dw]

@@istvanilosvai2962 It was muffler packing. No big deal

[@xlujah9269]

Has it blown up yet? I wanna put one in my wrx

[@noahphillips9782]

your car will blow up if u do that 100%

[@yatte3891]

did you run it with the catalytic converter still on BROO......

[@vhonborbon986]

How did you wire it? I heard from people you have to do it differently for the fake ones.

[@dariuslewis9320]

I bought a icebeam version hope it works good

[@dariuslewis9320]

How do I find a English setup

[@gavin9627]

if you get a cheap one and turns out bad will mess anything up?

[@jewtubetruckers]

Bro do you have the wire diagram for the install and also did you have to do a cat delete???

[@MrPond-xp6dl]

Took me a minute to realize I’ve been in this car Bc we’ve met

[@NickDemers-rh6dw]

And who may this be lol?

[@MrPond-xp6dl]

I gave the the subie lanyard when I was like 16 when we went for a ride with another friend and I now own a blue hatch

[@NickDemers-rh6dw]

@@MrPond-xp6dl Ahh yes I still hvae that lanyard too

[@MrPond-xp6dl]

Will you help me if I got one for the hatch

[@NickDemers-rh6dw]

@@MrPond-xp6dl yea I could. I don't recommend the knock off though only cause it will probably be a dud

[@xcgavin5658]

Who needs cats!!!

[@rasec1889]

install video?

[@SLU2MOVIES]

You my man are a man off culture ;) Going to install one into a N/A GH Can't find the ECU pinout but going to figure it out ;) some way ;p Did you use the diodes inline with the beeR Ignition signal ?

[@NickDemers-rh6dw]

I have 4 diodes coming off of the 4 ignition wires on the ecu and then into the bee r ignition wire

[@SLU2MOVIES]

@@NickDemers-rh6dw Perfect thanks, got so much hate :P for buying one, and even more hate when they heard it's a fake one All need to do is find the coil signal from the ecu ;) Much appreciation

[@nen-ire]

@@SLU2MOVIES does your fake one work?

[@nickige1080]

@@NickDemers-rh6dw ignition signal wire correct not ground or power

[@hiboost2453]

Hey man what settings do you have set on your Bee R? Just curious.. mine doesn’t spit like this aha

[@NickDemers-rh6dw]

Honestly I just play with them al the time but this is set to the max gain and like max rpm

[@hiboost2453]

and a day later I figured out how to get those settings right and now my engine ticks like a mofo rip pops were hella loud and apparently I was spitting flames haha sick as shit though just not the right car to put it on ig :P

[@NickDemers-rh6dw]

@@hiboost2453 no wayyy! Haven't had any trouble with mine that's not good

[@hiboost2453]

@@NickDemers-rh6dw Yeah man! :( gotta pull my engine, might throw the unit on my e36 next time I guess I was told its my cam bucket (lifters pretty much)

[@NickDemers-rh6dw]

@@hiboost2453 Sorry to hear that best of luck!

[@tkw123amg]

Is it really the fake one?

[@revo.d]

WAIT SO THESE THINGS WORK? i dont want to spend $200 on a real one if the fake one works as well

[@NickDemers-rh6dw]

I won't say its guaranteed because there is so many knock offs but I got this one off of wish and surprisingly it worked. Think I paid 35 bucks.

[@revo.d]

Nick Demers you have the link?

[@BDR.Kriminal]

@@NickDemers-rh6dw u have the link

[@NickDemers-rh6dw]

@@BDR.Kriminal I posted it somewhere in the comments I don't think it works anymore though

[@danparkman3579]

Were did u take the rpm signal wire from mate

[@NickDemers-rh6dw]

Tapped into it from the ecu I believe it's called the engine speed output

[@danparkman3579]

@@NickDemers-rh6dw i have a diffrent scoob tho i wired one in today but its not cutting it out ect.. i have to be like fy thottle to do anything

[@NickDemers-rh6dw]

@@danparkman3579 You can tap into the rpm wire behind your gauge cluster too

[@danparkman3579]

@@NickDemers-rh6dw do u think this is my problem problem have it in the tacometer output on ecu at moment but it doesn't cut it in neutril with handbrake up

[@NickDemers-rh6dw]

@@danparkman3579 So I wire my rev limiter box like this. Goes to 12v and GND. My rpm wire comes from ecu. My signal wire I have on a switch to ground not through the handbrake. That way I can turn it on and off when I want without the handbrake having to be up. And my box is wire to ignition coils 1 2 3 and 4 not the cam angle sensor

[@chonslie]

what injectors were you using at the time 565s im guessing???

[@NickDemers-rh6dw]

Stock 550s I believe but honestly not too sure!?

[@chonslie]

@@NickDemers-rh6dw they are probably 550s if that’s a Hawkeye if it’s a blobeye or bug they are 440s

[@chonslie]

@@NickDemers-rh6dw also ty good to know I’m about to put some 565s in my bugeye I Appreciate the shared knowledge!

[@ivanshinoda]

Do you fully depress the gas pedal? or what % do you depress?

[@NickDemers-rh6dw]

Slam the pedal all the way and it limits the revs to whatever you set it at

[@GabrielSTEFAN943]

Does it throw any codes ?

[@yohan1902]

Any damages to your motor/internals?

[@NickDemers-rh6dw]

Nope nothing. Only my exhaust packing blew out

[@yohan1902]

Nick Demers hmm does the bee limiter build boost?

[@NickDemers-rh6dw]

@@yohan1902 Just a limiter no boost ova hea :(

[@ivanborruel]

I put the fake bee r and now my car won't start.

[@NickDemers-rh6dw]

Thats strange because even if your wires were switched around the original wires from the ecu should still be connected and it shouldnt negatively effect anything.

[@ivanborruel]

@@NickDemers-rh6dw It won't turn on because there was no diodes. Anyways, that thing did not work.

[@ivanborruel]

You need to wait to get the exhaust heated to produce the bangs?

[@NickDemers-rh6dw]

No wdym?

[@ivanborruel]

@@NickDemers-rh6dw if you need to get your car at a normal operation temp or it works right away when the car is cold.

[@NickDemers-rh6dw]

@@ivanborruel It'll work for whatever you set the rev limiter to. No need to wait for anything. Except I would never do this when it is cold you grenade the rings

[@ivanborruel]

@@NickDemers-rh6dw I ask you this because I installed a fake Bee-R on my 2003 Impreza WRX and it only limits the rpms but no bangs or flames at all. Yellow knob is on F, and the rev limiter is set to 5500rpms or something like that, what are your settings?

[@NickDemers-rh6dw]

@@ivanborruel This was with everything turned up to the max

[@MrSnowman777]

Di you install this on the coil pack or on the ecu?

[@NickDemers-rh6dw]

Ecu

[@fatman24271]

still working good? do you throw fat flames?

[@NickDemers-rh6dw]

Works fine I can only see flames at night

[@fatman24271]

@@NickDemers-rh6dw I see it

[@Mt-ze3xe]

Bro still had a cat????

[@ivanshinoda]

What was the thing that spit out of the exhaust pipe?

[@NickDemers-rh6dw]

Exhaust packing or somethin like that?!

[@ivanshinoda]

@@NickDemers-rh6dwAhh, nothing serious. I just bought a knock off version of bee-R from Ebay called ''Power Builder PQY, how hard was the installation? I have a 2003 Impreza WRX, where did you get the installation instructions?

[@NickDemers-rh6dw]

@@ivanshinoda My box came with some instructions but it didnt work you have to get the ecu pinout online and watch some videos to piece it together.Took me about an hour or so

[@ivanshinoda]

@@NickDemers-rh6dw Thanks mate, I will star to collect info on this installation.

[@NickDemers-rh6dw]

@@ivanshinoda Good luck if I come across anything I used I'll send you some links

[@nen-ire]

how good is it still?

[@NickDemers-rh6dw]

No issues

[@crossover2777]

did you hook the 2 step wire to the ebrake or to a switch?

[@NickDemers-rh6dw]

No I added a switch that went to gnd so I can switch it when I want to

[@crossover2777]

@@NickDemers-rh6dw actually thats exactly what I need help with lol. so you have a simple off/on toggle switch right? do you put the 2 step wire on one end and a ground on the other or? I'm new to all of this haha sorry

[@NickDemers-rh6dw]

@@crossover2777 Yes very simple. One side of the switch to the signal wire the other to ground. That's it

[@crossover2777]

@@NickDemers-rh6dw sweet. also where did you wire your 12v wire to? couldn't find a spot on the ecu pinout? thanks

[@NickDemers-rh6dw]

I found one on my ecu but if not i would go from the cigarette lighter outlet or straight to the battery but if you go battery make sure you can switch it so its not always on and only on when the car is on

[@felsauro]

did you got the link where you buy it ?

[@NickDemers-rh6dw]

Dont have a link anymore sorry. I got it off of wish.com

[@ivanborruel]

Nick, where did you hook the green wire?

[@NickDemers-rh6dw]

Goes to the diodes

[@ivanborruel]

@@NickDemers-rh6dw I connected the green wire to crankshaft sensor and get BIG explosions

[@NickDemers-rh6dw]

@@ivanborruel So you didi it right? Or thats not supposed to happen?

[@ivanborruel]

@@NickDemers-rh6dw a user from KZbin says that the fake Bee R doesn't work well with subarus. He commented that for big explosions you can connect the green wire to the crankshaft sensor. I did that and get BIG explosions but he also told me that he bent two valves by doing that in the lapse of two weeks. I didn't obey the warning and when doing explosions my car suddenly went off and I had to tow it home. The main 15amp fuse blew.

[@NickDemers-rh6dw]

@@ivanborruel Oh man. I had mine for quite a while and then some seals let go and I had some leaks. Lol I stopped using it then.

[@Exhaustlover]

Awesome 😎

[@slytewrx7408]

Whats the black smoke from?

[@NickDemers-rh6dw]

Unburned fuel

[@392Tommy]

You got a link for the ecu pinout?

[@NickDemers-rh6dw]

Ill send it in a few!

[@392Tommy]

@@NickDemers-rh6dw did you ever find that link ?

[@NickDemers-rh6dw]

@@392Tommy Oh yea sorry I thought they sent here they are! www.romraider.com/forum/viewtopic.php?f=7&t=13924 forums.nasioc.com/forums/showthread.php?t=1198827

[@stephenbaker7225]

What were the colours of wires on yours? Mine is yellow, green, red, brown and blue.

[@NickDemers-rh6dw]

I think yellow green white and red and black

[@stephenbaker7225]

What part of Berta are you in? I’m in yyc

[@BDR.Kriminal]

Do you have cats?

[@NickDemers-rh6dw]

Catless downpipe yea

[@DarkoStreams]

forex?

[@NickDemers-rh6dw]

What about it?

[@DarkoStreams]

Nick Demers you trade? 👀

[@NickDemers-rh6dw]

@@DarkoStreams Yes I do

[@xcgavin5658]

Holy fawk

[@僕めろん]

なんかゴミがでてきたw