"IDK what this sensor is here but we're gonna remove it" lol -every car guy
@Bagged8GenAccord4 жыл бұрын
no way.... first yt ive ever seen that runs no adds
@frightenedsoul4 жыл бұрын
“I like to drive this car... uh rather... not slow” lol! Me too man. Me too
@hotlinejames4 жыл бұрын
The sensor on the rear control arm is a leveling sensor for headlights
@AdrellixGaming4 жыл бұрын
Damn bro you’ve been grinding!!! I remember u had like 2k subs with that mazdaspeed 3! just found the channel again, unreal man!
@kidscope8864 жыл бұрын
You have shown me everything I need to know to work on my own subi you’re a life savvveeerrrrr
@jackbrady863 жыл бұрын
Very cool video. I recently did my shocks and struts on my Prius, and when that bolt on your strut was giving you problems, it triggered my PTSD
@Bones1144 жыл бұрын
Dude my son would go nuts over that coloring book lol he loves riding in my sti. Love your channel my dude
@daddywrx12344 жыл бұрын
Perfect timing for this video cuz imma have my firstborn in October and can’t wait to cop those books
@SosaBuilt4 жыл бұрын
Few months later now, how do you like the coilovers? I'm debating on a few diff ones and these are on my list. Thanks in advance !!
@nolahahnshouse33894 жыл бұрын
I just put a set of k sports on my corrado and so far I love them!
@khangdo53183 жыл бұрын
That Mustang looks sick.
@JoeyyTube4 жыл бұрын
That’s so funny... this whole time, keeping up on your channel, I could have sworn you had Coilovers already 😂 righton Cam
@benjamindippo4 жыл бұрын
I know you had a Mazdaspeed 3 but you should pick up another one and properly mod it like you did the ST. Especially now that you have all the support.
@baldazar3 жыл бұрын
I’m picking these up tomorrow in Mesa for my A4, I appreciate the tips!
@Soaraza_Enterprises4 жыл бұрын
Nice install. I'm gonna be doing this shortly. You should update us if / when you get an alignment . . Are you planning on doing adjustable lower control arms, toe arms, or the roll correction kit from whiteline?
@Zainathan4 жыл бұрын
new cam upload? love to see it! really nice quality video and very informative
@reflexboxer2ndlt8073 жыл бұрын
Tucson in the house
@truudat4 жыл бұрын
Neiko breaker bar is the best one in my opinion, got it on amazon for $22
@RastaMan30004 жыл бұрын
Love your content bro ! Keep it up , one of the few who can make a professional install video make sense
@auth.garage2 жыл бұрын
Have you had any issues running the stock lower control arms in the rear? About to order a set of coilovers and I’ve seen some people say without adjustable rear LCAs they see uneven tire wear and too much camber in the rear?
@IcySTi2 жыл бұрын
I miss videos on the VA.
@Bang_n_slang11 ай бұрын
Do you still have them ? What’s the review as of now. I have a 600hp c63.
@beesouljah3 жыл бұрын
Great video! Looks great with the new coilovers. Thanks bro! STI love
@gRosh082 жыл бұрын
Cool! Thanks for sharing.
@itscharstoncho59003 жыл бұрын
whats the size of your tires and rims
@makolaktoza50994 жыл бұрын
Yes i love your video pls nissan 350 z test
@moschoi2 жыл бұрын
How did you fit a jackstand next to the floor jack like that? I can never get my jackstand to fit on the pinch weld when I jack up my 2020 sti
@AyoManSyKoTiC4 жыл бұрын
I ran into the same problem with the fronts on my sti also. I ended up having to screw the bottom bolt out rather than using the mallet
@xBPxHolistic4 жыл бұрын
Love this channel man 🙏
@channelgreen59492 жыл бұрын
just had my coilovers installed at the shop today. i noticed my ride height on the front right side of the car is a little higher than the left.....is it because its not settled yet? or do they have to be perfectly even? thanks
@revaca78064 жыл бұрын
you should build a mk6 gti next!!
@santosb94423 жыл бұрын
Do you live in colorado ? because I saw a car that looked just like this one.
@carlosalvarez42082 жыл бұрын
Hey. Im thinking of going with the same coils how are they after a while
@brichhh773 жыл бұрын
What are the full tire size?
@abnerbravo60233 жыл бұрын
I just installed some coilovers last week I’m curious if you have any torque specs for top hats? I just tightened everything with a breaker bar.
@markmartin73842 жыл бұрын
What color is this car?? Is that a factory color?
@brother_maleik3 жыл бұрын
Didn't include how to get to the tophats of the rear coils
@rickygonzalez93402 жыл бұрын
do they not fit a 2020 sti? i think i saw they only fit 18 down
@hiramaragon19033 жыл бұрын
In the market for some coilovers just a quick question on spring rates, what do you recommend ? I’ve got a 2020 Subaru sti..
@angreinhan37184 жыл бұрын
What jack stands are you using i tried to put my jack and jack stands on the pinch welds but my jackstands wont fit
@thedude31894 жыл бұрын
Honestly in first bit I would of kept Jack there while you impacted it to reduce stress you might of cross threaded or shaved off some due to weight stress. Same with your wheels, at least wiggle them and go in spec form tightening sequence, I've seen people just throw there wheels up and use impact and then wheels come off because it shaved off a bunch of it on lugs. Sorry I just like to see you safe.
@bagle87494 жыл бұрын
is it a bad thing that im modding a 2010 toyota matrix (automatic 1.8 4 cyl. engine :'( ??? ksport coilovers, muffler and resonator delete, custom straight pipe addition. i want to get a diablo body kit and some wheels too..??? any tips??
@Mr_Ja34 жыл бұрын
Any updates on the Ksports?
@oldirtydave224 жыл бұрын
if you use an open hand wrench to guide the fastener out while your backing it out with the impact its a lot easier!
@RLTPDX4 жыл бұрын
Different question. what program do you use to edit your videos
@Tony-tk4ht4 жыл бұрын
Yessirskii
@briantavares90104 жыл бұрын
Should take professional pictures of the subie for wallpapers
@Rebecca-7134 жыл бұрын
I have a daily driven ‘16 wrx. I’m looking for some comfy coilovers, and these look pretty affordable. Do you think rolling the rear fenders is necessary in order to prevent tire rubbing?
@Hawk7886 Жыл бұрын
Entirely depends on your wheel fitment, height settings, and camber goal
@XxTrustNoOnexX4 жыл бұрын
Nice
@Jesuswalkss4 жыл бұрын
You recommend these for the 350z? Ive seen your old install video and was curious to see how you've liked them
@CameronAlford4 жыл бұрын
Love them! Drifted so good😍
@Jesuswalkss4 жыл бұрын
@@CameronAlford Lesgo okay gonna have to give them a try 👌😤
@felixleonardo22024 жыл бұрын
What ksport model are those ,control pro,sport ,gt
@pothead5034 жыл бұрын
You have a Tomei titanium exhaust, but can't afford a proper impact. It's a life saver, get one!
@906films4 жыл бұрын
Yo when does merch ship?
@CameronAlford4 жыл бұрын
Did you order a restock item?
@906films4 жыл бұрын
Cameron Alford I don’t believe so. Two CS tees, 2 CS stickers, turn for rumble, and silver jet tag
@kristianbrown3584 жыл бұрын
Noti squad
@kidscope8864 жыл бұрын
Does anyone know if you need lower control arms when going on coilovers
@CameronAlford4 жыл бұрын
you do not. But to get a proper alignment or a certain angle or camber you need them
@wilmarmorales66713 жыл бұрын
I have a question men, you have never had problems with your car
@RobHTech2 жыл бұрын
Geez/ What happened to the floor? I thought you said it was heavy duty and rugged. Looks like cheap Epoxy.
@zack21894 жыл бұрын
ahh first comment but i need a tutural for a 350z one tho plz
@zack21894 жыл бұрын
tutorial*
@CameronAlford4 жыл бұрын
I did ksport install on the 350z already yo! Go find it on the channel
@juzi432 жыл бұрын
Bro looks like he could be related to Mac Miller
@dieselduy67724 жыл бұрын
Hello...
@davidresinos4 жыл бұрын
Third
@roberthawkins3692 жыл бұрын
i didnt get a tee shirt....WTF Ksport !!!!
@Leeoh9494 жыл бұрын
Slam it
@austinhuitema46044 жыл бұрын
Does anybody else agree that the channel was better with the 350z??