Relaxed Shortblock Build with Dachshund l No Music l ASMR l I EJ20/EJ25 l Subi-Performance

[@avisivam8540]

The best ASMR on KZbin

[@hammerton1]

THANK YOU for actually showing the process of installing the heads to the rods. So many videos just skip over it.

[@E83-b8e]

You know a man's about precision when he scalpels open his 'o' ring bag... A true craftsman 👌😎

[@TheGuccibane]

I love your Dachshunds! Mine is going to be 20 years old in April!

[@erikdejong2091]

so nice to see that you really leave nothing to chance, really someone who loves his job

[@kessdoggie]

Watching an artist at work, a great way to start the day with my coffee.

[@skibik64]

I have never owned or driven a car with a boxer engine but I sure do find these videos interesting to watch. Thank you for hosting them.

[@-RA-0]

If I ever had a subaru I will take it to you. Very, very nice job.

[@SubiPerformance]

hehe good idea

[@pajapajic8809]

Vrhunski rad i pedantnost i sa vrhunskim alatom daju vrhunske rezultate.

[@johnreese3762]

Another great Video! Thanks

[@javierlebron20]

I wish you use to give info like the piston rings gap,torque specs etc.. that will make the videos perfect

[@Kyle-pz7os]

All of that is readily available information, both from subaru, and the piston manufacturer.

[@MiGG_Aus]

@@Kyle-pz7os no its not

[@lepeejon2955]

The Bob Ross of engine builds but with happy Dachshunds.

[@davidzimmer2694]

Beautiful

[@tatdexter2334]

Nice to see one put together by a pro. Wish my hand was that steady when applying sealant!

[@bikedogtor1663]

Good editing

[@blermule8692]

Hut ab mein Freund! Ich arbeite selber seit 30 Jahre in der Herstellung und Veredlung von Verzahnungen wo es auch sehr präzise zugeht. Und ich bin immer wieder beeindruckt, mit welcher Sorgfalt du deinen Job machst! Ich schau mir das sehr gern an!

[@brkofobija]

Complicated engine and tight engine compartment, the only advantage is the low center of gravity. Top mechanic!

[@874runnersr5]

Keep up the great work my dude!

[@juanpadilla7062]

You do some awesome work. I wish I could afford one of your short blocks.

[@gmsworkshop3957]

Hi my teacher, Subi is Lerning Cener for me. Subi is the Best Lerning Center of The World,

[@abc123546879]

Love your DOGS.

[@rocelos]

E muito bom ver essas montagem,pois se aprende muito sobre medição e ferramentas para ganhar tempo, parabéns pelo excelente trabalho.

[@МаратХайрулин-ц6в]

Привет.По моему мнению , одна из лучших серий по сборке,прогрессируешь и прислушался к просьбам твоих поклонников по поводу перевести на тот или иной язык,молча ,но все понятно и снято детально и со всеми не маловажными(я бы сказал основопологающим при сборке щепетильности в допусках размеров),круто было бы если паралельно выводить на экран допуски размеров, и будет хоть в университет это пособие обучения,как относится к сборке правильно.Спасибо.

[@jorgeconcepcion934]

Exelente trabajo como siempre. Saludos desde puerto rico.

[@alejandrogaut]

Hola Andy: Gran video, realmente que detallista, no se te escapa nada!! El instrumental de medición todo Mitutoyo, de primer nivel, da gans de comprar un Subaru fundido para llevartelo y que lo dejes mejor que de fabrica. Saludos desde Córdoba, Argentina!!

[@gmsworkshop3957]

Subi Mechanics are Family relax.

[@3x__]

Super wie immer!

[@nicoquattro3950]

Wirklich sehr geil 👍 Alles perfekt auf die Boxer abgestimmt. Wäre mir aber auf dauer schätze ich zu langweilig 😁

[@olip20]

I also have 2 Dachshunds and 2 forester (one full STi build in Canada) !! LIke a lot your channel !

[@manelf1750]

Me gusta lo rápido que montas los pistones. Eres crack tío. 👏👏👏👍👍👍

[@Rreeve87]

another great video! Hello from Brunei!

[@ЕвгенийФилиппов-т1и]

Красота, и без мата!

[@PMMM9]

Excellent.

[@kking5652]

Excellent, from nitro West Virginia USA.

[@abc123546879]

After you tank the block do you clean the oil holes to make sure they are clean.!!!!!

[@sonarerol6709]

Wahnsinn wie genau du ihr das macht super saubere Werkstatt und arbeit ich hab meine vespa getunt 46ps am Rad haha mit dem hab ich gumistreifen gezogen hat weil die so laut war hat sogar die Polizei dann nach geschaut aber da war ich schon zuhause. Ich liebe das zerlegen schmutzig auf mega genau und sauber zusammen bau und du bist Vorbild für mich was arbeit betrifft mach so weiter lg aus Wien

[@сергейСизяков-э3ы]

It’s amazing

[@danspeed7039]

Why dont you use redline assembly lube anymore andy?

[@SubiPerformance]

I like that lube more :)

[@stephenhunt6253]

What is that rod you're pushing into the wrist-pin holes to prepare for putting in the wrist-pins? That's pretty neat.

[@jon-paulcooper8336]

Always bravo 👏👏👏

[@jorgemartin4933]

U make the best vids 👍💯

[@gerardcurran8664]

Why measure the connecting rod bolt before torquing them down?? Pleasure watching you work, real perfection👌

[@sephiros9883]

They are stretch bolts. He measures that they stretch as specified by the manufacturer, which means that they are torqued down perfectly. Lesser builders just torque it until it beeps and call it a day :)

[@myoniwy]

@Subi Performance Why you use copper gasket (19:27) to the aluminum block? It destroy aluminum.

[@mattbelka1]

Well done mate grate video 👌👌👌👏👏👏

[@fitoxky]

Que luz dejas en biela y bancada para un auto uso diario 450whp

[@guilleromagnoli7391]

Hello from Argentina. Very good videos! What do you tell me about subaru engines for experimental aviation? Regards GNR

[@C0smicEye]

What pistons are you using? Factory OEM? or Mahle like I've seen you use in your other videos? Also, I assume the green stuff is just run of the mil assembly lube?

[@SubiPerformance]

mahle motorsport ❤️😍

[@d913y]

Goodson first engine assembly lube

[@ze_german2921]

I rebuild my first EJ25 engine and I installed the wrong main bearings (STDX) 0.001" extra clearance, what I needed was STD. Now I get to do it again 😁

[@mareksumguy1887]

Why do you use RTV silicone on case halves, instead of anaerobic sealant??

[@22inkvizitor]

какое масло льете в двигатель ,марку и вязкость???

[@iTzToRuthles]

@Subi Performance Do you also need to gap the oil control rings aswell?

[@AVEFENYXX]

You are de big🤙🏼🤙🏼🤪

[@ssfikas745]

What oil use ?

[@ObliterationxGuitar]

What exactly is he measuring with the gauge at 9:00? Like whats the reason for it?

[@stevecuthbert8856]

Hello Andy. I hope you don't take as criticism but it seems like there should be a more secure way to hold the crankshaft when torquing down the connecting rod caps rather than holding it in a vise. The pressure pulling sideways on the crank may not be bending it at all but if it was secured in a sturdier fixture of sorts it just seems like it would help you too so you would not need to hold back on the crankshaft while torquing. I know you are an expert builder and have many engines to prove so. This is simply a neutral statement from a loyal fan to possibly assist to bring your builds to another level of refinement. I love your channel my friend.

[@mattbelka1]

Do you use extra clearance on crank and conrods bearings on all your engines or you always stick to OEM clearance? Or may be is better just always stick to OEM clearance???

[@Cord1976]

Why do you not use plastigauge to check main and bigend bearing clearance? Even after all the measuring, i still like to double check.

[@SubiPerformance]

Mark Cordall i trust my measuring instruments....and plastigsuge is 💩

[@Cord1976]

@@SubiPerformance Why would you say it 💩? I've built a great many engines mainly RB26's and a handful of EJ's/4G63's and i always liked to double check my measurements with plastigauge, it has on a very few occasions highlighted slightly tighter gaps that localised measurements would have missed. Am always keen to learn from others experience.

[@bartxxl1]

Can you do after the build a first startup?

[@centrumsubaru]

Hello. Nice work, as always. In Your opinion what differences are in between ACLRACE, KINGRacing, MAHLE Motorsport bearings ?

[@SubiPerformance]

the precission :) mahle best :)

[@multiv4rider]

The mahle bearings are clevite right?

[@cristianionici5070]

HI, what was the approximate cost for this work? Thank you.

[@drivelikejizzy6882]

Freu mich auf meinen subi pullover 👌💪

[@lichy8296]

What oil using to assembly engines?

[@SubiPerformance]

www.subi-performance.com/product-page/subi-performance-montage-gel

[@daos3300]

@@SubiPerformance could be interesting if you provide a tds. i like to know what i'm putting in my engine.

[@fernandovillagran3116]

buena excelente de chile, puerto montt

[@sphinx5101]

Which pistons were used in this build ?

[@sphinx5101]

Which rods ?

[@ungaasable]

Where do you get your "drei-bond" gasket joint. Online?

[@NoPainNoBrainNoShame]

12:57 Nooooooo!!!!... .. oh, nice.

[@PMMM9]

Relaxing and satisfying to watch...

[@Behind_The_Slice]

Nice, wann kommt den dein Stage 4 Block in den Shop? Zu den Sleeves war da nicht das Problem das sich die Büchsen einmal setzen würden und so die ZKD flötten geht? Oder habt ihr das in den Griff bekommen?

[@tjlovesrachel]

I deff need a closed deck long block from you ......I’m so trying to build my 17 sti.. I’m looking for 500 to the wheels... pump gas ..hopefully you got something for me 👍👍😉😉

[@34SV]

why you measure conrod bolts lenght after torquing? thanks!

[@SubiPerformance]

i check the stretch :)

[@34SV]

@@SubiPerformance how much is allowable? new or used bolts? thanks from Argentina!

[@charlesv3962]

Peanut!!!!

[@elmzsni]

you make it look so easy... those measurements give me headaches

[@PopularDollar]

Where are you guys located?

[@SubiPerformance]

germany

[@PopularDollar]

Subi Performance awesome 💪

[@transmetalworks]

My girlfriend was watching this with me, she's impressed that you are a guy who can find a hole.

[@SubiPerformance]

haha

[@Chris.Davies]

Oh man, the EJ20 crank is so tiny and lightweight. No wonder they are such lovely engines. But don't put lightweight pulleys on the front of the engine! The crank speed needs damping at idle, so a heavy pulley stops the crank getting wrecked on #1 & #4.

[@abc123546879]

Why use a knuckle buster on a torque wrench to torque.

[@Budivedder]

Pinter ini orang asemble mesin kerjanya bagus

[@johnjimjohnston]

i have never seen them run a new engine

[@yondaimehokage3343]

8:35 can i know what is that for?

[@555_Kochi_STi]

Measures the bolt stretch

[@506_Dust]

Why would he put honey in it?

[@РусланКазахстан-о7з]

How match мотор собрать?

[@AleksandrYurchenko]

Добрый день! В одном из видео вроде видел, что у вас есть русскоговорящие сотрудники. Как ли это?

[@МаратХайрулин-ц6в]

Да.Твой теска по имени.

[@Use_2024]

Интересно, если он 2 поршня поставит по классической схеме это уже будет считаться ошибкой?)

[@Kyle-pz7os]

Sure seems like the wrong way to torque the connecting rods, really bending the crank in the vice like that. Dont they sell a fixture? I get the block is two halves and its inaccessible compared to a traditional build, but there has to be a better way.

[@saulespino2510]

So not everybody knows what a shortblock is. I have a BRZ and want to learn about my FA20 engine but not sure if I have a shortblock engine…

[@ModifiedUsedomMedia]

Ja wie viel Leistung kann man so einem opendeck anbieten? Wenn die richtigen Innereien drin stecken.

[@westhouse4641]

Seeing that crank flex and shift in the vice makes me shudder

[@papadill8138]

I wanted to grab that falling rod for you hahahhaha

[@leolldankology]

Make a shirt with the doggos.

[@ProfDriftel]

wo is der Kaffee? :-)

[@larryholman6618]

Did not see ring end gap staggering position on the piston? Uggh. LoL!

[@sonarerol6709]

Frage warum werden die kolbenclibs eines durch einen ersetzt Loch montiert hmmmmm sicher blödefrage lg wien

[@williamgeggatt768]

Did i just watch rocket science?

[@dabb3dout]

Skill like that I'd say you could frost some dam nice cakes !

[@user-dj8nz4rq3d]

У вас что китайские кольца или мастер плохо расточили цилиндр

[@sonarerol6709]

Zu kolbenclibs hab ich mir selber beantwortet: weil mann an der Kurbelwelle nicht rankommt oder hmmmmm

[@pimpsquad1542]

Why all install this black crankshaft from Spec-c,a lot of test were made and show that hardness of all crankshafts the same.Its just advertising action from subaru. Just a Marketing.

[@МішаБойко-р8у]

Привіт з України!

[@juanpadilla7062]

Sponsor me. Lol

[@elbrusbekpolatov10]

I want to come to you can study Friends like this let the author see