Sublimate on a Canvas Board with Lamination Film

  Рет қаралды 31,969

Making with Marilyn

Making with Marilyn

3 жыл бұрын

In this video, I sublimate a photo onto a Dollar Tree canvas board using lamination film. I saw a KZbin video from Griffith Designs where this process was used, so I decided to try it myself. Wow, it works wonderfully!!!
Some items used or discussed in the video:
Cosmos Sublimation Ink www.shareasale.com/r.cfm?b=13...
1.5 mil lamination film www.amazon.com/gp/product/B00...
Scott 3.0 mil laminating pouches www.amazon.com/gp/product/B00...
Heat Press (15" x 15") www.amazon.com/gp/product/B08...
Cricut Easy Press Mini www.amazon.com/gp/product/B07...
Koala Sublimation Paper www.amazon.com/gp/product/B07...
Butcher Paper www.amazon.com/gp/product/B07...
Heat Resistant Tape www.amazon.com/gp/product/B07...
Teflon Sheets www.amazon.com/gp/product/B07...
Heat Resistant Gloves (these are actually for hair stylists using heat wands and hair straighteners, but they work fine for me) www.amazon.com/gp/product/B07...

Пікірлер: 141
@michelledepasquale9272
@michelledepasquale9272 7 ай бұрын
Your tutorial is clear and concise. No frills or distractions, just the facts! Thanks!
@MakingwithMarilyn
@MakingwithMarilyn 7 ай бұрын
You're very welcome. Thank you for watching and commenting.
@ofeliacastaneda4963
@ofeliacastaneda4963 Жыл бұрын
What a great memory to have HAPPY TIMES
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
Thank you!!! That is so true.
@dorothycaridine6246
@dorothycaridine6246 Жыл бұрын
Yes, I love your tone and patience in describing how to do it. Very good instructions.
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
Thank you so much!!!
@C.Nahual
@C.Nahual 2 жыл бұрын
I made my first canvas sublimation thanks to your video. It looks amazing! This is an excellent tutorial!
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Thank you so much!!! I am happy your love your canvas! It is amazing what you can do with it.
@sonyascrafts4527
@sonyascrafts4527 2 жыл бұрын
Marilyn that came out great! Thanks for sharing!
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Thank you Sonya!!!
@almacanelo8610
@almacanelo8610 3 жыл бұрын
Love,love how you show step,by step this tutorial Very nice sublimation picture Thank you for sharing
@MakingwithMarilyn
@MakingwithMarilyn 3 жыл бұрын
Thank you so much for watching and your wonderful comment!!! This was a fun project:)
@abiromeroramirez
@abiromeroramirez 2 жыл бұрын
The anti ghosting tips are gold! Mucha gracias! Awesome tutorial 👌
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Thank you for watching and your sweet comment!
@BobbieBTexas
@BobbieBTexas Жыл бұрын
Thank you. I’m going to try this tomorrow. Love your teaching, no music just your voice explaining everything. Going check out your other videos
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
Thanks so much!
@maiyerandkaiyalaniyang-mou3430
@maiyerandkaiyalaniyang-mou3430 3 ай бұрын
I wanted to say, I watched your video and tried it out. It turned out amazing and the colors were vibrant. Thank you for this video
@MakingwithMarilyn
@MakingwithMarilyn 3 ай бұрын
Thank you for watching and letting me know how it came out!!!
@brendaroberts6443
@brendaroberts6443 Жыл бұрын
Beautiful pic of you and your family. You did an amazing tutorial. Thank you for sharing with us🤗
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
Thank you!!! I've really come to cherish the picture:)
@kathydunn128
@kathydunn128 2 жыл бұрын
I love how thorough you are with your teaching! You are by far the best instructor on KZbin! Thank you for sharing and God bless you❤️
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Oh my, you just made my whole day better with such a sweet comment!!! Thank you so much for watching!!!
@hfletcher39
@hfletcher39 3 жыл бұрын
Thanks for sharing the tips on how to get finished edges. I really appreciate that
@MakingwithMarilyn
@MakingwithMarilyn 3 жыл бұрын
You're very welcome! Thank you for watching.
@JfamilyShoppe
@JfamilyShoppe 2 жыл бұрын
Wow I'm so excited for this thank you!
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Yes, this is a great way to get vibrant photos onto those inexpensive canvas boards. Thank you so much for watching.
@MileyonDisney
@MileyonDisney 2 жыл бұрын
I like the tip about using the Teflon sheet under the laminate. Thanks for the helpful video!
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Thanks so much!!! I'm glad it was helpful!
@trinaceniceros8027
@trinaceniceros8027 9 ай бұрын
I love your video .I did my first canvas and it came out amazing!! Thank you...
@MakingwithMarilyn
@MakingwithMarilyn 9 ай бұрын
Thank you very much! Congratulations on your first canvas🙂
@tammy7759
@tammy7759 2 жыл бұрын
Thank you for this excellent video!
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Thank you so much Tammy!!! And I appreciate you taking the time to watch and comment:)
@lynnefusco5320
@lynnefusco5320 2 жыл бұрын
Fantastic tutorial thank you so much 😊
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Thanks so much!!! I appreciate you watching and taking the time to comment:)
@debragarrett007
@debragarrett007 Жыл бұрын
Awesome Video Marilyn. Love your channel❤️❤️.
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
Thank you so much Debra!!!
@ivywright28
@ivywright28 Жыл бұрын
Thank you so much!! It’s been really helpful ❤️❤️
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
You're welcome! Thanks so much for watching!!!
@tajuana_on_a_mission
@tajuana_on_a_mission Жыл бұрын
Excellent job!
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
Thank you so much!!!
@btmomm2
@btmomm2 11 ай бұрын
I just found you on KZbin and LOVE how complete your instructions are! I have to do this! I am in charge of making 80 Christmas gifts, for ladies in our Church. I think I will do a cute manger scene....Thank you!
@MakingwithMarilyn
@MakingwithMarilyn 11 ай бұрын
Thank you so much!!! Some people use the lamination pouches and just use the front or back. I really prefer the super thin lamination film. It's a little tougher to work with b/c it is thin and wants to roll up on you, but I love the results. Here is my most recent video on this technique. kzbin.info/www/bejne/qXaklnuolLCMgtk
@denisejohnston6243
@denisejohnston6243 2 жыл бұрын
Great video! Thank you
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Thank you so much!!!
@paflamechaser
@paflamechaser 2 жыл бұрын
awesome... thank you so very much.
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Thank you!!!
@jungsomewhat
@jungsomewhat 2 жыл бұрын
Very nice voice friendly and helpful and "happy "👍 thank you from the UK
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Thank you, thank you, thank you!!! I appreciate you watching and taking the time to leave such a wonderful comment! I would LOVE to visit the UK!!!
@jungsomewhat
@jungsomewhat 2 жыл бұрын
We would love to see you this side of the big pond, the USA gets bad press and I'm afraid memories are short, we would all be speaking German now if it wasn't for the brave dough boys ... Your alway welcome 🙂
@Creole_marmalade
@Creole_marmalade 10 ай бұрын
Beautiful
@MakingwithMarilyn
@MakingwithMarilyn 10 ай бұрын
Thank you so much!
@dorothyrose9262
@dorothyrose9262 Жыл бұрын
Thanks so much !
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
You're very welcome. Thank you for watching!
@TheShugluv7777
@TheShugluv7777 2 жыл бұрын
Hi Mar, I am trying to sublimate on a canvas and came across your video which was so helpful thank you for sharing!
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
I'm glad you found it helpful RUG'l!!! If you want to try the really thin lamination film I used, send me a text message. I have a lot of it and could mail a sample to you.
@TheShugluv7777
@TheShugluv7777 2 жыл бұрын
@@MakingwithMarilyn Thank you so much Mar! However I clicked on your Amazon link and placed a order for the film. I have the sheets, so I wanted to try the film that you suggested. I always get a lot of bubbles with the sheets unless I put them through the laminate machine.
@miasam60
@miasam60 2 жыл бұрын
I love your tutorial!! I’m going to try this out, I already have all the necessary items! I also love how you explain everything so well! 😀
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Thank you Maria! I appreciate it. And I hope your project turns out great!!!
@miasam60
@miasam60 2 жыл бұрын
Thank you!! I forgot I had those boards, I came across your video and really enjoyed seeing how easy you make it look!
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
@@miasam60 I use a really thin 1.5 mil lamination film. I love it because it melts into the canvas texture really well. But, I had someone else who tried it say they felt it was hard to work with. The thicker pouches works also, but it does seem like it is sitting more on top of the canvas than the thin film.
@miasam60
@miasam60 2 жыл бұрын
Thanks Marilyn, did you buy that on Amazon? I have some, I’ll have to check to see what thickness it is.
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
@@miasam60 I did buy it on Amazon. There are some expensive ones, but I found one that is not. I can alway mail a sample to you if yours is thick. You could just email me.
@ebonygiftsfromgod7668
@ebonygiftsfromgod7668 Жыл бұрын
thank you so much:) this was very helpful perfect tutorial
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
Thank you so much!!!
@ebonygiftsfromgod7668
@ebonygiftsfromgod7668 Жыл бұрын
@@MakingwithMarilyn you're more than welcome
@litlsuz
@litlsuz 2 жыл бұрын
Nice job! I had made a few of these a few weeks ago using a thicker thermal laminating pouch also found the finish to be shiny. So I sprayed it with Some Krylon Acrylic Matte Spray and I like it much better. Just an idea, if care to try it. Worked for me. Glad to see you had succcess with the 1.5 mil thickness, I'm about to try that too and will use your settings. Much appreciated!
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
I figured out to spray a matte finish over these and I really like how it turned out as well! Yes, I love the 1.5 mil but you definitely need to tape it to your Teflon sheet or paper under the board because it really curls up. Thanks so much!
@litlsuz
@litlsuz 2 жыл бұрын
Okay Marilyn, thank you. I used tape, that helped. Just finished it. So I think that the 1.5 film produced an image that was not as clean as the thicker stuff. For that reason I may have to go back to the thicker stuff. However, I did like the way that the 1.5 picked up the texture of the substrate.
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
@@litlsuz now I may have to experiment to compare the two with the same photo 😂
@litlsuz
@litlsuz 2 жыл бұрын
Marilyn, I think I'll be doing the same because I may very well have done something wrong. I was also cooking dinner between waiting for heat press to heat up and things to cool down. LOL. Better just stick to one thing! Anyhow, let me know if you see a difference. I'll let you know what I get too.
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
@@litlsuz that sounds great.
@preciouspeaces
@preciouspeaces 2 жыл бұрын
TFS...great video I'm late to the sublimation game😊
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
You're right on time!!!
@angelawagnon9778
@angelawagnon9778 2 жыл бұрын
This is so awesome. I wonder if this film would work on cotton tshirts. Does it become stiff when it cools? I have a hard time finding 100% poly shirts.
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
That is an intriguing idea, but I don't really think it would work. I am going to try it on some scrap fabric though to see what happens. I have only used it on canvas and wood (hard surfaces), so I am not sure how it would feel on fabric after it cools. I will try a small sample and see. Thanks for the idea!
@opfla
@opfla 6 ай бұрын
I love your videos! They are so easy to follow. I really love that little shelf that your heat press is on. Where did you get that table? I love it
@MakingwithMarilyn
@MakingwithMarilyn 6 ай бұрын
Thank you so much! I bought the table that the heat press is on at Harbor Freight. It is very similar to the Husky ones they have at Home Depot, but less expensive. The one I have includes a lot of drawers in it for storage.
@opfla
@opfla 6 ай бұрын
Couldn't find it on their site; unless I don't know what it's called @@MakingwithMarilyn
@MakingwithMarilyn
@MakingwithMarilyn 6 ай бұрын
@@opfla YUKON 46 in. 9 Drawer Mobile Storage Cabinet with Solid Wood Top
@shamekathomas4918
@shamekathomas4918 2 жыл бұрын
♥️❤️❤️❤️
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Thank you Shameka!!!
@sharonfranklin8522
@sharonfranklin8522 Жыл бұрын
Just what I needed. I've been trying to use 3 mil Scotch at 400 deg 60 sec and have had the laminate ripple or nearly burn. I asked on a fb group and all I got was crickets. Other YT videos didn't say temps or times... frustrating. So I am ordering the 1.5 mil and changing my temps and times. Don't they also make a matte form of this laminate? Thanks for your great video.
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
Thanks so much Sharon! I really love the 1.5 mil. I had one person say it was too thin to work with and it just wanted to roll up on itself. I tend to lay my project on a teflon sheet, then put the laminate over it and tape each corner to the teflon sheet. That holds it in place well. There is a matte version of the thin laminate and I would LOVE to try it. But it was a lot more expensive than what I found for the regular. Sometimes I lightly spray a matte sealant over it to decrease the sheen.
@cindyswain8094
@cindyswain8094 10 ай бұрын
I love your videos Marilyn! I’m using the Scotch 3ml pouches (that’s what I have) and no matter what time or temp I use, the film ripples. Do you have any suggestions for how to use the Scotch pouches as far as time and temp for adhering to the canvas? Or would you just recommend that I get the 1.3 ml film?
@MakingwithMarilyn
@MakingwithMarilyn 9 ай бұрын
Thank you🥰 I would try to stretch your pouch film and then tape it to something under it to try to keep it from doing that. Possibly that might help but I ended up switching to the thin film after trying the 3 mm pouches.
@proskurniak1
@proskurniak1 2 жыл бұрын
What is your printer for sublimation? Loved this idea and the process but still do not have a sublimation printer, wondering about getting a regular printer and putting sublimation ink in it and also looking at the Sawgrass SG500.
@proskurniak1
@proskurniak1 2 жыл бұрын
oops, just saw below the answer to my question, LOL
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
I have 2 printers now that I use for sublimation. I have the Epson Ecotank 2760, which is not marketed as a sublimation printer, but I put Cosmos Ink's sublimation ink into it instead of the ink that came with it. More recently, I got an Epson Ecotank 15000, which is a large format printer (up to 13" x 19"), also not marketed for sublimation. I added Hippoo sublimation into into it instead of the ink that came with it. I don't see much of a difference in the two printers/inks, except the ability to do larger prints with the 15000. People who have the Sawgrass printers really like them, but the price of the ink that goes into them is pretty expensive. I hope this helps you in some way:)
@intrinsicparanormal
@intrinsicparanormal 2 жыл бұрын
do you have any tips about graininess on the canvas after pressing? both mine came out grainy, even with high quality photos.
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
The only thing I can think of is whether the image might be shifting slightly causing it to look less crisp or possibly overheating it. I have not seen that happen before so I'm really not sure. Let us know if you figure out what is happening so that it might help other viewers.
@mansaetwaru3191
@mansaetwaru3191 Жыл бұрын
I would like to see more videos
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
Thank you so much for watching!
@marjoriecramer9102
@marjoriecramer9102 2 жыл бұрын
I have been trying to do this on Canvas with the Scotch pouches. I cannot get them to flatten or sublimate very well at all. I am doing it at 400 for 60sec for the final press using my heat press. I am wondering if it is because of the thickness. I am going to order the thinner film that you have. I was doing the prepress at 400 for 25 sec before adding the sublimation pic. Any ideas? Thanks
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Your timing for pre-press and final press seems to be okay, but I don't use the Scotch pouches because of how thick they are. I tried them and definitely prefer the thinner film. I hope you like the thin film as much as I do. Due to its thinness, you do have to deal with it curling, but I think it is well worth it! Let me know how it goes with the thinner film!
@tajuana_on_a_mission
@tajuana_on_a_mission Жыл бұрын
What type of pressure should the heatpress be on to avoid the canvas from curling?
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
The various boards I have used have experienced differing amounts of curling, but what I like to do before adding the film in to put the board under the heat press to release as much moisture as possible. If the board curls at that time, you can immediate place it under something really heavy until it cools all the way off. On some boards, I have had big pockets of air form on the back side as the air inside is heated. I haven't seen that pressure causes any differences in the curling issue.
@TheBestUni
@TheBestUni 3 жыл бұрын
🙋🏾‍♀️🙋🏾‍♀️❤️
@MakingwithMarilyn
@MakingwithMarilyn 3 жыл бұрын
Thank you so much!!! I love your channel and am really grateful for your comment!
@TheBestUni
@TheBestUni 3 жыл бұрын
@@MakingwithMarilyn thank you 😊 for your support
@natashasouliere1786
@natashasouliere1786 2 жыл бұрын
I love that you put magnets in your heat press and Teflon sheet. Brilliant! Can I ask what heat press you have?
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
@@natashasouliere1786 thank you! I have an inexpensive heat press from Amazon. Here is a link for you to check it out if interested. www.amazon.com/gp/product/B08JPMCRVJ/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B08JPMCRVJ&linkCode=as2&tag=makingwith022-20&linkId=e0aff3cc2f956258968f9fa14150788a
@connieantal6765
@connieantal6765 2 жыл бұрын
When I tried at Christmas to do this I had problems with the board warping. What did I do wrong?
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Oh no, that's awful!!! When you say it warped, did it curl a little or what was the warp like? If it curls a bit, you can set it under something smooth and heavy while it is warm and let it sit under the item for quite awhile. That will help it be more straight. Also, did you pre-press the canvas board before pressing on it? I hope this might help a bit.
@LanceMcGrew
@LanceMcGrew 4 ай бұрын
Can I get an Amazon link to the magnets you used to secure the teflon sheet to upper heat press platen?
@MakingwithMarilyn
@MakingwithMarilyn 4 ай бұрын
I believe I just bought them at The Dollar Tree Store.
@lenasbackyardhomestead9461
@lenasbackyardhomestead9461 2 жыл бұрын
Could I use the lamination paper on faux leather ?
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
I Lena! I don't think so. I think the faux leather that I have would melt or greatly warp under the high heat and length of time required for sublimation.
@gazsto
@gazsto Жыл бұрын
Hi, been looking for a similar laminating film in the UK and we use Micron and not mil in thickness, you mentioned 1.5mil and not the thicker 3mil like the pouches and the only reference I have come across is some pouches that are 5mil and in the description it states thickness 0.127mm (or 127micron). Any advice? as you regard the thinner film as better, so I assume something like 75 micron, but not too sure. Thanks Lolly ♥
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
I prefer the thinner film. To me, it melts onto your substrate better taking on its form really well. The thicker ones seem a little cloudy or less clear, but just barely. They work also, I just like a really think lamination for these types of projects.
@gazsto
@gazsto Жыл бұрын
@@MakingwithMarilyn Thank you! 👍♥
@jerrypittam374
@jerrypittam374 2 жыл бұрын
Any way to cut the glare/gloss finish?
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Yes Jerry, I have sprayed these with a matte finish clear gloss spray to do that and they came out great!!! It took awhile to learn to spray evenly and keep the can further away from the canvas (and to use minimal spray), but once I got it figure out, they turned out great!!! I have thought about doing a video on that and you just inspired me, so thank you for the question!
@jerrypittam374
@jerrypittam374 2 жыл бұрын
@@MakingwithMarilyn Wow! Thanks for the quick reply. Happy to hear you have a solution. The glare would be a dealbreaker for me, but a touch of matte spray is a great solution.
@jSAYWAT
@jSAYWAT 2 жыл бұрын
What printer are you using for prints?
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
I used an Epson Ecotank 2760 for this project. Thank you for watching!
@nikkipowell9927
@nikkipowell9927 4 ай бұрын
What settings would you use for wood?
@MakingwithMarilyn
@MakingwithMarilyn 4 ай бұрын
Thank you for watching! Which settings are you asking about? Print settings, press settings?
@bobslfcu773
@bobslfcu773 Жыл бұрын
Have you tried dtf on a canvas board? Do you know if it would work without the laminating film?
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
Yes, I tried it out about a year ago on a video. Here is a link to the video. kzbin.info/www/bejne/rZbMiXunmNlqpq8
@rosecowan1556
@rosecowan1556 Жыл бұрын
I tried to print on my 2760 and the Cricut software will not print it. I’m guessing I need a bigger printer for 8 x 8 size. I purchased the laminate you suggested, haven’t tried it yet.
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
The printer is large enough. Cricut software limits the size. You would need to use other software to print it.
@rosecowan1556
@rosecowan1556 Жыл бұрын
@@MakingwithMarilyn Thank you. Do you print on other software?
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
@@rosecowan1556 I print from Inkscape mostly but also from Silhouette Studio. Inkscape is free. I have several videos on using it.
@rosecowan1556
@rosecowan1556 Жыл бұрын
@@MakingwithMarilyn Do you like your Epson ET15000? I read in comments that is printer you used for the canvas you made.
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
@@rosecowan1556 yes, I love my Epson Ecotank 15000. I have it and I have an Epson Ecotank 2760 for my sublimation prints.
@jf6720
@jf6720 5 ай бұрын
What happens if you just try sublimating directly on the canvas?
@MakingwithMarilyn
@MakingwithMarilyn 5 ай бұрын
If it's a cotton (or other non-poly canvas), the print will not be very vibrant. Since you are not going to launder a canvas, it's not like it will wash out, but it's not going to be super vibrant as when sublimating on the film or other sublimation coating.
@carlosdejesus474
@carlosdejesus474 Жыл бұрын
I've been tying to sublimate on canvas for about a week without being successful. I was trying to print a family picture but I was getting messages like this picture has to be flatten and the resolution has to be at least 300 etc,,etc. I'm using Adobe Illustrator . Any suggestions???
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
I'm sorry but I am not versed in Adobe Illustrator. Where did the file come from? Did you scan a picture or was it emailed to you? If you want to email it to me so I can look at it, I am happy to do so.
@estherventura707
@estherventura707 Жыл бұрын
Thanks I like the film better
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
I love that method! Thank you for watching.
@andrealatona8693
@andrealatona8693 2 жыл бұрын
My butcher paper is sticking to my lamination paper. What am I doing wrong? I am using the rolled laminate.
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
The sublimation paper should cover your lamination film, and then the butcher paper just keeps the sublimation ink off of the heat platen. Even if there is white space left on your paper, you will want to have it up against the film instead of having the butcher paper against it. I hope this helps and thank you for watching!
@yvonneherrera3145
@yvonneherrera3145 Жыл бұрын
What type of paper did you use to print picture
@MakingwithMarilyn
@MakingwithMarilyn Жыл бұрын
I used Koala paper on this project. You can get a link to it in the video description if you are interested in purchasing it. Thanks for watching!
@cogginslorri
@cogginslorri 2 жыл бұрын
how much press do you use in your press
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Are you asking what pressure I use? If so, it depends on what I am pressing. I have to adjust it to have less pressure for thick things and more for thin things.
@valeriehofmann2615
@valeriehofmann2615 2 жыл бұрын
I've done two and the second one the ink didn't sink into the texture of the canvas. You can see white areas :/ why would it do that?
@MakingwithMarilyn
@MakingwithMarilyn 2 жыл бұрын
Did you use the same lamination film, temp and pressure? I am not sure why it would do that.
@valeriehofmann2615
@valeriehofmann2615 2 жыл бұрын
@@MakingwithMarilyn no I did a hotter temp for the laminate. I dont know if it sunk in to much
🐶 How to Sublimate on Canvas with Laminate (WOW!!!)
20:14
Silhouette School with Melissa Viscount
Рет қаралды 36 М.
HOW TO SUBLIMATE ON CANVAS WITH A LAMINATING SHEET
22:00
Crafting with Delonda
Рет қаралды 23 М.
39kgのガリガリが踊る絵文字ダンス/39kg boney emoji dance#dance #ダンス #にんげんっていいな
00:16
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 8 МЛН
MISS CIRCLE STUDENTS BULLY ME!
00:12
Andreas Eskander
Рет қаралды 19 МЛН
Best Toilet Gadgets and #Hacks you must try!!💩💩
00:49
Poly Holy Yow
Рет қаралды 21 МЛН
Using a Photo to Make a Sublimation Tumbler
28:31
Making with Marilyn
Рет қаралды 4,2 М.
Sublimation on Ceramic Tile Using Matte Laminate
24:20
The Oily Krafter
Рет қаралды 59 М.
Sublimate on Glass: Dollar Tree Cutting Boards or Sublimation Blanks?
14:29
Sublimate on 100% Cotton Using This DTF Hack - Yamation Review
19:47
Crissy Creates Official
Рет қаралды 21 М.
5 Ways to Sublimate on Wood
15:18
Just Might DIY
Рет қаралды 79 М.
Eloá fazendo graça kkkk
0:15
Story Elis e Eloá
Рет қаралды 24 МЛН
UNO!
0:18
БРУНО
Рет қаралды 1,3 МЛН
Мужик купил китайское авто и сразу поехал в СЕРВИС
0:14
Собиратель новостей
Рет қаралды 3,6 МЛН
ДОМАШНЕЕ ЭСКИМО//ПРОВЕРКА РЕЦЕПТА ТИК ТОК
0:22
ОЛЯ ПЕРЧИК
Рет қаралды 1,2 МЛН
Забота Казахов🇰🇿
0:45
QAZAQ PEOPLE
Рет қаралды 276 М.
The poor girl couldn't take care of the cat 😢😔
0:38
Ben Meryem
Рет қаралды 6 МЛН