How to Cut Siser EasySubli for Sublimation with the Silhouette Cameo

[@busybsdesignshop]

This video literally saved my nerves and sanity. I kept looking at other tutorials looking for a way to quickly and more efficiently clear out all of the unwanted tiny cuts. None of them mentioned using the offset option. And I absolutely LOVE the tip of moving my image out and back. Other tutorials strongly recommend never moving the image. Thank you so much!!

[@DesignBundles]

Glad it helped you and your sanity! ❤️ -Brittany

[@Theresa914]

Becky, you are a life saver. I got my EasySubli in today and the instructions are useless. It took me lots of searching but I found you and you answered all my questions. Awesome. You are my favorite go to person for silhouette, vinyl and sublimation. Thank you so much.

[@DesignBundles]

Glad it was helpful! 😊

[@elizabethguzman5037]

@@DesignBundles having issues with registration marks loading my pro. Any suggestions?

[@roxannasnt]

This video literally saved my life. I kept looking at other tutorials and none of them mentioned the cut settings, the blade settings, or the fact that I had to heat up the print to enhance the color. Thank you so much!!

[@DesignBundles]

Awesome Roxanna! I'm so glad we were able to help! I'm sure your project turned out fabulous! ---Becky

[@marlettaengland1513]

Another great video. I love how you get right to the point and explain things so well.

[@AmandaJaneCoombes]

Your videos save my life! I can watch other videos and never understand it but your videos I totally get and so thank you!

[@DesignBundles]

Happy to help!

[@BostonMQ]

Great video! Soo much info, I'll be back (probably 5 times 🤣) to take it all in. I learned other things about the Cameo that I didn't even know!

[@J.maries_sincerethings]

I came here for the tutorial ( Thank you btw)...but I love your nails!

[@DesignBundles]

Thank you for watching! 😊

[@davecruz9893]

This is an old video....BUT...It helped me ever so much in a situation I had....Thank you.....Your videos are so easy to follow...Marry Me ???

[@DesignBundles]

Glad we were able to help! 😊

[@juliegpickwick6598]

Brilliant I have a lot of Colton shirts I can now use for sublimation. Thank you so much

[@susanwolfe7999]

Great video. Best one on KZbin for EasySubli. Attempted my first EasySubli project. Without these instructions it would have been more difficult. I only wish Siser would improve their mask!! Your video's are always very informative and easy to follow.

[@DesignBundles]

Glad it was helpful!

[@justineboyington8124]

I have an Epson 7720 and it seems no matter what settings I use the easysubli keeps getting paper jammed the size of paper I’m using is 8.4 by 11. Any suggestions?

[@flarpster3675]

You are just the BEST!! Thank you so much!

[@DesignBundles]

You are so welcome!

[@everetteallen3156]

Awesome video! Great content. You answered so many questions I had. I appreciate you sharing.

[@charlenelabrasca102]

This is great! I thought you had to press your sublimation design on the easy subli. But I can print directly onto the easy subli! I’m excited to try this!!!

[@DesignBundles]

Hi Charlene! Let us know if you have any questions! We are here to help - Dawn 🙂

[@oldbrown56]

Becky, thanks for the great video! I am a newbie to all this type of stuff Just got my Cameo and setup my sublimation printer, without your easy to follow instructions the Cameo and printer might've ended up in the bin. Thanks from OZ

[@DesignBundles]

Glad it was helpful!

[@joleneuccello3588]

This was so helpful!!!

[@DesignBundles]

We're so glad! ❤️

[@vikki92411]

Very nice instruction video. Thank you 😊

[@DesignBundles]

Glad it was helpful!

[@anthonykirkendhall4344]

Excellent tutorial!

[@mistytilley5817]

Everything works great except for cutting through everything! I have an autoblade & when i set to force 33 it cuts all the way through. What should i set at to prevent that?

[@EmmyKaye97]

For Silhouette Cameo, I use these settings. Hope it helps! Material: Heat Transfer, Flocked Blade: Auto, 3 Speed: 8 Force: 15

[@kathiedelany1265]

Hi Becky, I love your videos and often find myself viewing them again to refresh my memory 😊. Are you still doing videos? Where can I see or follow you? Haven't seen you in awhile.😢

[@NaturalVirgo2012]

Love the content. You make it look easy. Lol. I’m still getting used to my Cameo

[@DesignBundles]

I completely feel the struggle, the Cameo (and especially the software) is a very powerful machine. Hope you enjoyed the video and feel free to ask any questions you have! ---Becky

[@tamaraarhue7707]

Great Tutorial!!!! Thank you for the info.

[@yaditruji2595]

wow so helpful thank you

[@DesignBundles]

Glad it helped Yadi!

[@wilsons043]

Awesome! I'm ready to tray this out.

[@DesignBundles]

Hope you enjoy it! - Agata

[@lilg3zzy]

Awesome tutorial ❤️

[@MaryFruge-u8y]

Will all EasySubli have have the white line as this design does? Or can it be cut at the color lines?

[@toniwyles2593]

What would you decrease the cut to?

[@jordanlotus188]

Hi! Very nice work, shirt is really looking nice!!!

[@jordansanders3511]

nice

[@DesignBundles]

Glad you liked it!

[@calleensweeter1080]

I have always used a cricut and i love the machine but the print and cut is to limited. I did learn your work around and loved it. Yesterday i got a Cameo 4 thinking this would be easier. I followed your video (which i love your videos) but i still cannot get it to just cut the outline :(. i think i am missing something. I also use a Macbook

[@BrittanySimmons-to2wb]

Ok so I’ve followed the instructions step by step, my registration marks are getting completely cut off when I print the image only the one corner mark in there to the right but it totally misses the square and the left corner.

[@DesignBundles]

Hi Brittany! Have you tried recalibrating the machine? - Dawn

[@marycentko5074]

I struggle with the siser easysubli mask when I have words the letters seem to pull up then when I flip it over to apply to a shirt they fall off the mask…ugh. Any suggestions

[@DesignBundles]

Hey Mary! Have you tried making an offset behind your lettering? - Dawn 🙂

[@tyronefreeman9378]

Hi great videos thanks but why when i try to do print and cut my Cameo does not see the reg marks? I have tried putting the eye over the black square and hit send then it does not look for the other reg marks just starts cutting inside my artwork? Thanks for any help - Tyrone

[@peggystephens325]

I'm using a Mac - what is the shortcut for duplicate to the left? I tried command ← and it only moved my whole mat to the left.

[@DesignBundles]

I am not sure there is one. It seems you just need to use right click and duplicate

[@ChrisTina-tf4xb]

Is this like HTV? Will it peel like HTV?

[@DesignBundles]

Hey Chris Tina! This is a type of HTV. Your HTV shouldn't peel if you have applied it with the correct heat and pressure. Usually peeling HTV is representative of not enough pressure during pressing. Hope this helps! ---Becky

[@coryjeffreys5146]

Since this video do you still recommend the same setting when cutting the easy subli. Or do you have better. Setting now? Because you said about it cutting a little to deep earlier…

[@DomoLadii]

Same. Would u change the force ??

[@toniawinn9605]

Very helpful! Thank you!

[@DesignBundles]

Thank you Tonia! ---Becky

[@jennylowe4486]

Great Video as always. Can you please tell me what mask you use? I have no luck with the ones that come with the easysubli. Thanks so much.

[@MeeshaMillz]

Awesome video! I am going to try this process this weekend!!

[@DesignBundles]

Have fun! :)

[@90milessouthco65]

To complicate for me can you try with Cricut? I sold my silhouette machine

[@LouiseBradfordKreations]

Where do you get your masking from?

[@DesignBundles]

Hey there! The masking is sold at any place that carries the EasySubli and also at most pattern vinyl distributers, although the masking for pattern HTV is slightly different than the masking for EasySubli. Hope this helps! ---Becky

[@Killakitanna]

You printed with sublimation ink directly onto the easy subli sheet?

[@DesignBundles]

yes

[@craftingwithkristie1692]

Great video, thank you!

[@DesignBundles]

Glad you liked it! Thank you for watching!

[@w2naturals676]

Love your content

[@livincountry]

But wouldn’t you still be able to use the remaining subli even if you didn’t change those settings?

[@ssergeant9682]

when it comes to the mask for lifting the design - does it really matter what you use? they claim (Siser) that you have to use theirs because of the material content. I have the easy subli - but doubt I have the masking stuff although I'd pretty sure I have other stuff that came with HTV printed material.

[@DesignBundles]

Other masking may not be strong enough which is why they recommend the siser masking.

[@vanessaepley13]

So do you print on the matte side then do a print and cut ? Is it hard to do with the he Cricut

[@oscarprogamertime4504]

Hi , i printed my sheet and tried many settind and still coming out like grainy white little dots between print, how i can solve this ? Is not bright and clear as yours, thank you...

[@DesignBundles]

Hey there! I would definitely try to perform some test prints on regular paper to test out your colors before printing on the EasySubli. You can also sublimate on it without running it through your printer, I'll link that video for you below. Hope this helps! ---Becky kzbin.info/www/bejne/eqTWh2xvf8ath7c

[@LouBeister]

Love it!

[@DesignBundles]

Thanks Lou! ---Becky

[@daffyduck8244]

Becky is masking the same as transfer tape? Thanks

[@juliebellrogers8658]

Question, so you print right on the easysubly, and how do you do it with the cricut

[@cassandrareed5959]

Love the design Becky

[@DesignBundles]

Thanks Cassandra! ---Becky

[@tarasantone8689]

Where did you find the large size easysubli? I can only find 8.5x11

[@isamaralonso-ruiz3004]

Where can I get the Rachel blade? My reg blade didn’t cut all the areas and smeared my ink( I warmed it up at 310 for 60sec) even though I did a 2x cut. Thanks for the video.

[@DesignBundles]

Hi Isamar! Did you check on the Silhouette site?

[@loristubblefield4254]

Thanks so much for your videos. They are so helpful! My printer only prints 8.5 x 11, which is big enough for my small & medium shirts that I design for myself. I'm having trouble figuring out how to flip my design & set my page up. Basically, I would need my design turned sideways. Can you help?

[@angelalove2314]

Great video!! I tried it and loved it!! But when you do a print that has a lot of ink do you have to clean you printers rollers to prevent pizza wheel marks on your next project?

[@nevaeh502001]

Omg this is what I was looking for. I love the details do you have a Facebook pfe

[@DesignBundles]

So glad this was helpful for you!

[@mariapreciado9349]

Hi Becky, I have a question how do you get your show print border to print bigger

[@pdokoonline]

You print direct on Easy Subli? You don't need to print on sublimation paper and do heat press on Easy Subli and than cut etc.?

[@DesignBundles]

Correct you print right onto the easy subli, depending on your printer! - Brittany

[@lifestylecurves685]

Lovely video!

[@smartsudio]

what is that transfer plastic called???Ty

[@ruthybarretta7955]

Hotfix Adhesive Permanent Fusible Adhesive Sheet can you do sublimation on this

[@Milyloved]

Nice 😍

[@DesignBundles]

Thanks 🤗

[@cyndibrierly7112]

I use the Epson 2720 that I converted. My Media selections are auto select, coated paper, photo, photo high gloss, photo Matt, photo semigloss or plain paper. Which media should I use to print my design on easisubli?

[@DesignBundles]

Hi Cyndi! Once your design is ready, open the Page Setup panel and adjust the Media Size to Printer so it matches the 8.5 x 11" sheets of EasySubli! - Dawn 🙂

[@toplevel956]

Can you do a video on how you use easy subli to print, please. I have an eco tank and exit won’t feel the easy subli

[@DesignBundles]

We do have one here - kzbin.info/www/bejne/e368n4qnaZKmgtE

[@Lisa-oh2vl]

Are you using a sublimation printer ?

[@mpcaz]

Do you suggest a warm stretch after application and can this be used on Polo shirts like Pique shirt with a knit pattern? Thanks for another great video!

[@michaelcombs1333]

Any suggestion if 60+ seconds under the heat press still causes a smear? I have an epson printer, using cosmos ink, and a cameo 4.

[@DesignBundles]

I would work on testing your print settings. It may be that your printer is putting out more ink than the vinyl needs. Try lower print settings and that should output less ink so it'll dry. Hope this helps! ---Becky

[@shantarenee73]

Hi! I was wondering if there is a way to get the white from around the letters? I noticed when you downloaded the image. The white wasn’t around the words.

[@DesignBundles]

Yes, I set this up to have the white border because the font was distressed. You can set up the image to cut exactly around the image if you'd like, it's all personal preference I think. Hope this helps! ---Becky

[@donadonaldson3430]

I hope you can help. I'm following along, and have tried several times, but 1. I am not able to change my page orientation to portrait. 2. I am not able to change the height to 19.0". Then I turn on the print border it is much small than my image. Can you please advise on how to fix this?

[@DesignBundles]

Hey Dona! I am more than happy to give it a try! First question, did you set your machine to "none"? I'll have to rewatch the video to see if I covered that, some versions of Silhouette Studio won't allow you to set the material larger than the mat. Your print border is determined by the settings in your actual print driver. Go to File > Print. Find your printer and click on Preferences. In there you will find the settings you need to adjust for what your printer will print. Start with these and let me know how it goes! ---Becky

[@beverlybuford9055]

Hi Becky! I tried to follow this procedure step by step. I wasted 2 sheets of Easy Subli 😭😢🤔 The first time my printer only printed about 4 inches of my design. The second time, my Silhouette cut it completely wrong. I had to move the blade to the block manually…it would not read it at all. Obviously, it still didn’t read it right because it cut it horribly wrong. Then I printed onto A-Sub but my cutter didn’t cut it at all. It sure acted like it was cutting….but it didn’t. I was using the auto blade set on 3 and 33. When it went over the entire design with the auto blade, it went back over it with the blade 2 holder going up and down. Your design and shirt are awesome! Any suggestions on what I’m doing wrong? Thank you!

[@DesignBundles]

I would double check your blade is locked in all the way, then I would make sure your blade is clean. If those suggestions still don't help I recommend recalibrating or looking if your software needs to be updated.

[@trina9366]

Is there a way to cut without the white border? How do I achieve a bordless print? Is that possible? Im really new to sublimation >.

[@DesignBundles]

Hi there! Are you referring to the bleed? We do have a video just for beginners which I think would be helpful! kzbin.info/www/bejne/hKSanpSZfKZ-rbM Let us know if you have any additional questions.. We are here if you need us! 😊

[@momsterof4_lrah]

Do I need a specific printer, or can I use my 2720? ( Also using cosmos ink, not sure if that matters at all! ) Thanks in advance !

[@DesignBundles]

You can use any sublimation printer and ink with Siser easy subli - Agata

[@momsterof4_lrah]

@@DesignBundles thanks so much, I appreciate you 🤗🥰

[@joys1613]

I only have Cricut that I use for my vinly and just pretty much started doing sublimation. Can I use silhouette to print and then cut it on my cricut? Thank you

[@DesignBundles]

Hey Joy! You can use your Cricut for the Print and Cut, you will just be restricted by size. As of now, I don't have a way for you to print from Silhouette and cut with Cricut, because you won't have a way to line up your design with the Cricut software. Hope this helps! ---Becky

[@luciap7177]

Do you have a print and cut on silhouette using a sawgrass printer?

[@DesignBundles]

Hey Lucia! This video will help : kzbin.info/www/bejne/jIuvgqOQa86Uja8 If you have any questions, let us know. We are here if you need us.

[@monteserick]

Looks like your using an epson 7710 printer, is there any special sublimation ink I need for this to work? Was going to buy a 7720 just trying to figure out what conversion kit to get.

[@DesignBundles]

Hey Erick! Yes, you'll need either a CIS system or refillable cartridges, depending on how often you plan on printing. The CIS systems can get clogs in the lines if you don't print almost daily. Hope this helps! ---Becky

[@imsosan74]

Love this I am learning so much from you! What mask are you using?

[@DesignBundles]

I'm using Magic Mask in High Tack (recommended for pattern HTV) but if you are going to source some to buy, I would probably go with the transfer that is made for the EasySubli, it should all be about the same price. Just if you happen to have Magic Mask already available, it may save you a separate purchase. Hope this helps! ---Becky

[@ninalugo8031]

Is she using sublimation ink?

[@velstreatsandthings7106]

You shared your main printer settings but I am wondering what the Color Correction settings are set to. I think this is the issue we are all having with the ink bleeding and not drying. Can you share what the Color Correction settings you had on the More Options tab please?

[@DesignBundles]

Hey Vel, I've actually never played with those settings before. I'll take a look and also research to see what I find out. As for the ink drying, make sure you don't have it on high quality, that may help. Thanks for the question! ---Becky

[@maicolfigueroa9146]

Hi nice videos, which blade did you use, I am cutting easy subli HTV with the automatic blade but it's not working. Do I have to buy a better one?

[@DesignBundles]

Hey Maicol, I personally use the Ratchet blade, they are a little hard to find but I feel they are more reliable (and I am "old school" before AutoBlades). Hope this helps! ---Becky

[@StickerBoutiqueInc]

so i am having an issue with when I put my easysubli into the epson printer, it doesn't matter if i do it through rear feed or the tray, it has these dots that are run after my main image. It does not do this on my sublimation paper fyi! How would I fix this?

[@DesignBundles]

Hey there! So if I am thinking correctly how you are describing, this is because the EasySubli is thicker than the sublimation paper and what you are seeing are commonly referred to as "pizza wheels" or something similar. I would check the level of ink (via your Printer Preferences) and see if you can reduce the amount of ink coming out. For example, I use Premium Presentation Paper Matte, but you may be able to use a more standard setting that will prink less ink. Hope this helps! ---Becky

[@StickerBoutiqueInc]

@@DesignBundles thank you, that was my second guess was to reduce the ink saturation! Going to try this. I also didn't try the tray i thought i had but didn't yet. just rear feed.

[@SaraEmmaLouise]

Hi great video. I was wondering can you layer other HTV's over easy subli? I want to use it as a "fill" and then have another HTV as a border. I hope that makes sense.

[@DesignBundles]

Great question! I don't think I would layer over the EasySubli, it will reactivate the ink when you press again. I would subtract out the design so that it fits together like a puzzle, then press the EasySubli last. Hope this helps! ---Becky

[@SaraEmmaLouise]

@@DesignBundles Okay, thank you so much.

[@jadedragon3534]

Does it feel like HTV on the shirt? What the longevity? I noticed with HTV after a while it cracks or peels.

[@DesignBundles]

Hey Jadedragon, it does feel like vinyl on the shirt and it has the same lifespan (depending on individual wear and tear). Hope this helps! ---Becky

[@claudiacorona3921]

My epson dont feed easysubli what am i doing wrong

[@DesignBundles]

Hey Claudia, are you trying to use the rear feed? That's what I use when printing with my Epson onto EasySubli. Hope this helps! ---Becky

[@ssergeant9682]

experimented. my cutting is WAY off. It reads registration marks way off to the side. the cut not only cut around the design, but then cut the offset again below the design. I'm not sure what to try next. fortunately I did NOT use the easy subli. I just printed onto paper for the experiment. these are the steps I took: traced the design to achieve a filled in design moved the design off to the left. did an offset on the 'trace' of .07 - then applied moved the design back over the new 'trace' didn't move it all the way so I did a group then center'. then grouped both the offset and the design. went to page setup - used cutting mat of 12 x 12 media size custom . 7 x 7 show print border and cut border added registration marks centered the design within the corners no 'print bleed' printed design on letter size paper put on a 12 x 12 mat hit 'send' it finally cut it properly (on paper). but why was the registration so far off the first couple of times. I'm almost afraid to try using the easy subli. lol Do I dare take this same image - print in on the easy subli - and try to cut it? or do I need to do another 'test cut'? the first couple of times it wouldn't let me de-select the cut border. the only thing I can think of is the design was too large or the paper I designated was too small? I enlarged the paper to a bit larger than 7. (made it 7.125) At least I'm not using that obnoxious auto blade. lol (thank you for that info - it really helped). I now only use the ratchet blade. you show the blade as being a ratchet blade. my software doesn't show that. just shows 1mm blade. Silhouette business edition 4.4.937.

[@DesignBundles]

Sometimes when the registration is off it is because there is too much light in the area. I recommend trying again with less light.

[@kathleenwilds1624]

Becky … another great one to save for another day. But … how does the transfer feel after? Like a regular vinyl transfer? Does it hold up well to wash and wear? I get the concept of why … just unsure if the after … Thanks

[@DesignBundles]

Hey Kathleen, it feels like any other vinyl product in my opinion, with a similar thickness. It does hold up very well to wash and wear, no complaints from me on that front. Hope this helps! ---Becky

[@emilygrossman6288]

Is there a link to where you recommend buying the masking sheets and additional supplies? Also do you need to use a new masking sheet for every design or can you reuse sheets?

[@emilygrossman6288]

Also where do you recommend buying easy subli paper as it is so hard to find it in bulk or reasonably priced anywhere

[@ssergeant9682]

I do most of my designs in Silhouette but I only have a cricut maker. can I put easy subli in my printer and then use the print and cut feature in design space? it prints it out and puts registration marks for the cricut maker to follow.

[@DesignBundles]

Yep, you got it, you can use EasySubli to print onto and then contour cut with the Cricut like you would other materials. Hope this helps! ---Becky

[@ssergeant9682]

@@DesignBundles I always have way too many questions, but why would someone do it in 2 parts. first the easy subli and then the printed sublimation paper? when they could do it as one. just trying to get the process straight in my head. but the single process is a lower temp and shorter time? (as opposed to doing the 2 step process which seems to require a hotter temperature and longer press time? it's basically like a regular inkjet printable, but with better colors?

[@Kelseyalexis03]

Hey! Where do I purchase the Easysubli paper

[@DesignBundles]

Hey there! I purchased this from H&H Sign Supply, but I believe a lot of vinyl suppliers carry it now. Hope this helps! ---Becky

[@lisaerrio1]

Why won't the ctrl L or ctrl R work? ctrl C worked? I think that's the best shortcut ever & I NEED it. can you help? Great video btw!!

[@DesignBundles]

Hi there! Thank you for watching and we are glad you found us! Have you recently updated the software?

[@lisaerrio1]

@@DesignBundles no I haven't lately. I can always go back to older version if there are issues? Also I'm using white easysubli with a black red & white school logo on a black shirt but the border is black. Do you have any suggestions because I'm new to offset & I think I removed the wrong middle pieces in the letters. Do I always want to use PNG or are SVGs easier for sublimations? Thank you in advance! I so appreciate your help!!!

[@jimmys511]

Can you do a comparison on the siser HTV and 3g opaque paper

[@lisafunicella5305]

OMG! I am having such difficulty following your directions! I’m not sure if it’s because I am using a Mac or if it’s because I have a different version but I am so frustrated! I can’t get the original cut lines to delete without deleting everything. HELP!

[@BrittanySimmons-to2wb]

I’m having the same issue, macs are so difficult

[@amberlindsey7112]

Have you used the forever subli-light? It seems like it would be easier than cutting the image out. Just would like to see you demo it lol. Love the info you give in your videos.

[@DesignBundles]

Hey Amber! I have not but this is an excellent recommendation. I will add it to my list! ---Becky

[@Shin3Live]

You can't do gradients or super detail with the Forever Subli-Light, also there is no way to get the white background. It is great if you just want to put a sublimation design directly on a light colored cotton garment. I feel the 2 products have very different uses.

[@amberlindsey7112]

@@Shin3Live Thanks for the info. I just received my order of it today. Going to give it a try.

[@kimberleejoyner4478]

Can this be done in cricut design space? I only have cricut products.

[@DesignBundles]

Hey Kimberlee! It sure can, you will just be restricted to the print and cut size of Cricut. Hope this helps! ---Becky

[@elieghrobinson609]

I've been having problems aligning my print and cut on my silhouette. Also I've been getting registration errors

[@DesignBundles]

Sorry to hear you are having problems Eliegh. I would check a few things just to start with: 1. Your lighting, some crafters even use a flashlight to illuminate the area and 2. Make sure your printed paper looks exactly like your screen. Even minor differences can cause the Cameo not to recognize the registration marks because it will be looking in the wrong area. Sometimes my Cameo will try to use the edges of my paper as the registration marks (not sure why) and I have to pause cutting and retry. Definitely recommend cardstock or copy paper when first starting out. Hope this helps! ---Becky

[@tracybarnes2531]

Why do I have line in my easy subli using epson eco tank2760

[@DesignBundles]

Hi Tracey! Is the line showing after you print? You may have a clogged nozzle!

[@tracybarnes2531]

@@DesignBundles yes but it’s brand new

[@DesignBundles]

Can you run a print test from your printer's program, please?

[@mystic671gaming5]

So glad I found this video, very informative. Is this almost the same process as doing it in Cricut DS?

[@DesignBundles]

Yes, absolutely, but you will be limited to the print and cut size of the Cricut software. There are a few work arounds that you can do, I'll link them below. Hope this helps! ---Becky kzbin.info/www/bejne/eqTWh2xvf8ath7c kzbin.info/www/bejne/rXmwh4uiap54fKs

[@cassandrareed5959]

Hey Becky the East subli is a sheet that you can use with your regular sublimation ink? I always assumed you needed a separate printer to use easy subli for sublimation.

[@DesignBundles]

Hey Cassandra! You are correct, you just use this with your regular sublimation ink and printer! Sawgrass does make a special ink that they recommend with the EasySubli, but I didn't see a huge difference in the quality to justify a separate printer and ink purchase. Hope this helps! ---Becky

[@cassandrareed5959]

Design Bundles Thxs Becky

[@NJS7770]

Do you print on the smooth side or the rough side of the easy subli?

[@DesignBundles]

You will want to print on the smooth side. 😊

[@nicolemelendez2254]

Can you use this without sublimation ink or you do need sublimation ink?

[@DesignBundles]

Hey Nicole! You do still need Sublimation ink. Hope this helps! ---Becky