Sublimation Paper Comparison: Which Should You Use for Your Crafts?

[@MaryKayLora]

Tip on telling which side is the right side of paper to print on: As a general rule, if you pinch the paper with damp fingers, the correct side will stick to your finger.

[@AlanAngelo1]

Before we buy any supplies, we check on Angie's site first to get her recommendation. We thought we would trip Hiipoo sublimation paper to go with the Hiipoo sublimation ink recommended. We definitely prefer the A-Sub paper over the Hiipoo sublimation paper. The issue is when trying to trim the paper. Using the Circuit trimmer, the Hiipoo sublimation paper will "catch" and not cut a clean line. The A-Sub paper cuts well with the trimmer every time. (Note: the blade is new too). For us, we will stick with the A-Sub paper and with any of Angie's recommendations!

[@AngieHolden]

I use both of that and the Hiipoo paper is definitely tricky to cut with a paper trimmer! I have noticed that as well!

[@lynnebizlyne436]

I too found that using the Circuit trimmer with Laser paper (using infusible ink) also catches and does not cut a clean line, as well as the printable vinyl. Yes it has a brand new blade in it so I am not sure why it only cuts regular copy paper ok. I found my cheaper Office Depot Carl brand trimmer cuts way better.

[@ramonamontgomery7996]

I just love the way you explain everything, you are my go to, thank you

[@AngieHolden]

Wow, thank you!

[@diegssegundo9590]

Hello there!! Thank you for sharing!! Do you used cotton on your t shirt or poliéster?

[@d.g.4499]

I think she used a polyester shirt. I don't think you can use cotton for this type of project.

[@denisedavis3342]

I love the way you explain everything as well! Links in description and time stamps are so great and helpful and saves time.

[@AngieHolden]

Glad you like them!

[@teresakennemore3990]

Thank you for all that you do. 😊 I watched your video for the first time last week, and this week I bought a printer and hippo ink. Thank you.

[@lynnebizlyne436]

Before I buy any supplies, I check your recommendations first. :-) I really prefer when paper is marked on the back to know which side to use. Thumbs up, just ordered the Asub. Thanks Angie! :-)

[@stevenadebanji5893]

thank you Angie for the video, i am new to t-shirt printing, and your video was very helpful...

[@lamarcapitalr]

Nice work space Looks very clean, neat, and Organized

[@janetkeenan9482]

I love all of your videos. I'm a new crafter here and you help me so much thanks alot!!!

[@AngieHolden]

You are so welcome!

[@carpentersization]

Your videos are really awesome. Thanks for all the hard work for us.

[@AngieHolden]

My pleasure!

[@MzNayNaysWorld]

Thanks so much for this video. I’m new to sublimation and I’ve already learned a lot from watching ❤️

[@AngieHolden]

I'm so glad!

[@joyscranfield5527]

Great info, thank you for doing research & sharing your results!

[@AngieHolden]

Glad it was helpful!

[@A_Just.OK_Gamer]

I would like to see you now do a comparison using specialty sub paper, like A-sub, and compare it against using regular copy paper and laser paper. I've seen others use regular copy paper and it seemed to work just as well as A-sub and is way cheaper than any of those papers used here. Thanks!!

[@AngieHolden]

I have that on my list!

[@marcelwoingue-dagrou2556]

Very nice video, straight to the point and clear !

[@Coast_life]

I printed some test prints on my new printer using standard Georgia-Pacific printing paper. Out of curiosity, I pressed the prints on my test material. It looked the exact same as my A-sub paper print...🤷‍♂️🤷‍♂️

[@saniyahcarroll4411]

I’m glad that I found your videos, I’m certainly not educated about cricut explore air 2 or the Siser press. My cricut only came with a mat nothing else therefore I’m lost 😞

[@AngieHolden]

Start with this video! kzbin.info/www/bejne/nZ-bpaCOmt-Kipo

[@barbarastroud4102]

Best explanations hands down.

[@LorraineCastellon-Rowe]

Awesome comparison video!! Thank you very much!!! Have a wonderful week!! 💐❣💐❣

[@AngieHolden]

Thanks for watching!

[@gaylrobinson6793]

You do an excellent job !

[@katiehewes423]

Thanks for the comparison. Is it just me, or does the DyeMaster paper look like its "unicorn" is more color-intense? I noticed it the printout and on the pressed shirt. Maybe that was just the video.... Did anyone else notice that? Thanks for the comparisons, Angie. Always informative.

[@AngieHolden]

I didn't see any difference in real life after pressed.

[@katiehewes423]

@@AngieHolden, much appreciated. Sometimes video is inaccurate.

[@mosthighlawson3872]

I agree the dye master pops more out of the three to me

[@eXpansiveconsciousness]

We have an Epson WF 7110 with Cobra Inks & use Dyemaster as our go to sublimation paper. Colors are much more vibrant with deep rich blacks compared to all other major brands we have tested including Texprint especially on mugs. Despite the paper not having a watermarked side, you can tell from the feel & color of the paper which is the correct side to print on. Dyemaster provides just the best results we have ever gotten out of any other sublimation paper at a great price.

[@sheilamiles7424]

I love your videos. You explain things so well.

[@AngieHolden]

Thank you so much!

[@livingmytruth90]

Good to know abt the various papers! & Thanks for using the hiipoo ink bc I haven't seen anyone else use n it's the one I got.... Now I know it'll work well!

[@AngieHolden]

Thanks for watching!

[@stephanierecht3295]

If you don’t mine me asking what kind machine do have I order epson 2720 and was wondering if I could use the hiipoo

[@livingmytruth90]

@@stephanierecht3295 yup thats the printer i have.i think as long as its sublimation ink it should work. I've been happy with the hiipoo ink.

[@gear21clothingco.75]

Great Video... I may try the A-Sub. With Cosmo Ink.

[@AngieHolden]

Go for it!

[@justinmolyneux6040]

I have trouble connecting to it wirelessly,besides that,awesome.

[@AngieHolden]

Sorry to hear that!

[@luv2craftcards]

The last unicorn looked darker bit it could be your lighting.

[@AngieHolden]

In person, they were all the same.

[@assadnujjoo]

You can test regular copy paper as well...

[@EmpressNatiLocs]

Great video thanks so much! I’m off to Amazon to order paper now! Also, I’m gonna subscribe!

[@TheKhulis]

.Good Info. .Looks like you could have trimmed all 3 and Pressed them all side by side in One Press.

[@pattibaileydesigns]

Thanks for this video Angie! ASub comes in 125g and 120g. I see you are using the 125g. Do you know the difference? I know 120g is thinner but curious why there are two different weights.

[@AngieHolden]

I could probably use a lower weight but I don't do enough sublimation printing to keep all of the weights. The difference is going to be in how color saturated your image is, the humidity at the time, and how fast your printer prints. I am finding I can use the 125 all of the time and not have issues. Which works for me. The lighter weight is probably less money as well. So, if you have prints that are not as color saturated, trying a lighter weight is not a bad idea.

[@Diana-sr5ub]

Just a tip, if using 1 shirt for testing several items try making you images smaller. Otherwise it was a good video.

[@AngieHolden]

Thanks I guess. I did want people to be able to see it.

[@MadeByTriniLena]

Awesome Angie

[@saniyahcarroll4411]

I’m glad that I found your videos, I’m certainly not educated about cricut explore air 2 or the Siser press. My cricut only came with a ma t nothing else therefore I’m lost 😞

[@trscsaeg]

Please lay the shirt flat when showing the press comparison next time and put the camera dead on. This way we can look at everything and compare. Great job and thank you for this video

[@Nekoenjeru]

Hi Angie, I do have a quick question🤗 I’m considering turning some of my artwork into coffee mugs and tumblers. My question is this. Of the 3 you mentioned here, which is the best paper for both mugs and tumblers? Thanks

[@AngieHolden]

They are all fine for that.

[@caramelgirl73]

Great video. Very informative

[@AngieHolden]

Glad it was helpful!

[@jules1990]

Can you use a low GSM for printing, there are so many different ones. Some say lower the GSM the more vibrant the colours. Do you have any advice please for mugs and tshirts thank you from the UK 😁

[@AngieHolden]

I would say experiment and see which works best for you. I don't think that it is going to make it more vibrant on all surfaces.

[@deniseelie9957]

Thank you for sharing with us. Do you have any suggestions or advice as to why the the A-Sub paper doesn't release all the ink?

[@keonipauole1828]

Does it work with dark colors and cotton? Thats the million dollar question.

[@AngieHolden]

Try this: kzbin.info/www/bejne/nYKmi4WkmaeHf5o

[@angelovazquez4240]

it did help alot this video THANKS!!!!!

[@abigailmobleybellinger2056]

Can you provide the info on the Heat Press you are using in this tutorial? Brand, Name, etc. I am interested in buying this heat press. Thanks for the wonderful tutorial.

[@AngieHolden]

Try this: kzbin.info/www/bejne/g5KrpXhriqt4itk&lc=UgyJBLZgAibl5UBf88N4AaABAg

[@cozettebyrd3161]

Hi I have a vivid home press 5 in 1 presser trying to print on a 100 percent polyester blanket using the A sub 125-G sublimation paper NOTHING PRINTED OFF😬

[@AngieHolden]

What ink and printer did you use?

[@kevinhennessy9229]

Love your videos. Question, whats the difference between 105g, 120g and 125g paper? What would you recommend for mugs? I see you use 125g.

[@AngieHolden]

Here is a brief explanatino: A-Sub 105g - best for designs that have light to medium ink saturation. A-Sub 120g - best for medium to slightly heavy-saturated ink designs A-Sub 125g - best for when you print designs that have very heavy ink saturation. I tend to have both 120 and 125 here on hand.

[@slashslash92]

@@AngieHolden I believe this should be added to the video's description as it's very useful. Thank you again Angie for all of your work

[@kathyshorter8150]

Thank you so much for this video. I wish you would do one for dark substrates.

[@AngieHolden]

It is coming up!

[@Crafts-and-cocktails]

Angie did you ever compare sublimation paper to copy paper?

[@AngieHolden]

Still on my list! My list is loooong!

[@lovelurae5306]

Great video thanks for the info. Which one feels the softest after being pressed.? I ordered the siser brand paper and it’s very stiff but washes well. The other brand I tried ppd is awful. After washing the shirt the image wrinkles.

[@AngieHolden]

I think you are talking about two different things. This is sublimation paper and only the ink transfers to your shirt. Siser the actual material goes on your shirt. This paper is for sublimation ink only.

[@jenniferscraftynook5626]

I was wondering if you can tell me or have a video showing the proper way to load the sublimation paper into the printer.. thank you so much

[@AngieHolden]

That would depend on your printer. But you should print on the side that does NOT have markings.

[@jenniferscraftynook5626]

Ok thank you

[@billkim7277]

Great video! Have you tried the DS sublimation paper from Epson itself?

[@AngieHolden]

Not yet!

[@alisasmithette4599]

So helpful thank you!

[@AngieHolden]

You're so welcome!

[@FilomenaDapaz]

Thank you .you are my go to.... girl teacher

[@krissyskreations]

Most sublimation paper do bleed when pressed, so be very careful reusing. I usually don’t even chance it unless I’m using Honestly Spinking Sublimation Paper which is proven not to bleed.

[@AngieHolden]

Reusing the cover paper? I always am!

[@krissyskreations]

@@AngieHolden Yes, reusing the butcher / blowout paper. Sometimes you don't see the ink until it's too late.

[@AngieHolden]

Definitely! I would rather throw it out each time but several of my viewers do not like that!

[@anabellmedina9954]

Have you tried , cosmos paper ?

[@AngieHolden]

No I haven't.

[@JORGINHODONASCIMENTO]

Great vid as always! Have you tried the Epson brand? I was very lucky to find an Epson F170 but i still need to get the paper, the heat press and start playing with it. But i rather get an expert's opinion so i don't waste time nor resources.

[@AngieHolden]

These are the only papers I have tried so far.

[@vikki92411]

Hi, can you tell me the best way of the best paper to do sublimation on dark fabrics please? I’m new to this. Thank you

[@AngieHolden]

Try this: kzbin.info/www/bejne/nYKmi4WkmaeHf5o

[@JB-yy3vt]

What is your printer? Do you have any issues with the printers jack jamming the printer- lots of people say the 13x19 jams in the epson 15000

[@AngieHolden]

I am ONLY using 8 1/2 x 11 as I don't have the capacity for the larger size. Good to know though!

[@3939889ISME]

I really love your video.

[@JCo-bx3tq]

You mentioned you use a different mat when using the easy press for sublimation, which mat is that? I don't think I saw it linked. Thanks!

[@AngieHolden]

I didn't link it! Sorry! I use the protective mat from Artesprix if it is large enough for the design.

[@vitunetune4042]

Excuse me I can use the a sub paper on a cotton shirt 👕?

[@AngieHolden]

Sublimation needs polyester in order to work.

[@patresaplus3274]

What’s your views on using copy paper for sublimation?

[@AngieHolden]

I plan on doing a more detailed video but I do feel like it results in a print that is not as vibrant.

[@meeraam987]

Thank you so much for this video much appreciated! 💓 Just wanted to ask about the quality of them after washing?

[@AngieHolden]

I didn't compare these shirts as far as which paper washed best.

[@saramedina8396]

Do you need a different type of paper when using dark color or is it white the only option? I’m a new subscriber and love the content of your video

[@AngieHolden]

I am working on some options for dark colors but this is white/light only right now.

[@saramedina8396]

@@AngieHolden thank you for the info. I’m looking forward to continue learning about sublimation before I go ahead with the investment.

[@deidrapowell8762]

You said make sure protective paper is ok for sublimation. I just bought a ton of butcher paper after seeing tons of videos saying that was ok to use - is it?

[@AngieHolden]

Yep. Butcher paper works!

[@Cjprivate1]

Hi ! Great video . Do you have information on any Htv sublimation papers that work best for the epson printer ?

[@AngieHolden]

This is the sublimation paper that I recommend for an Epson printer.

[@baemhkado]

Can I use a Teflon sheet instead of “protective paper?”

[@AngieHolden]

Try this: kzbin.info/www/bejne/sKOog5Zjbretfac

[@rachelpettit5438]

Thank you for the video. I was wondering how each did after a few washings?

[@AngieHolden]

I didn't compare paper after washing.

[@rachelpettit5438]

@@AngieHolden thank you

[@maxinealarado9530]

I bought the Printers Jack sublimation paper and it is not working for me. I am new to sublimation but I was hoping that I would have a hard time.

[@AngieHolden]

What do you mean it isn't working? What seems to be the issue? What are you using to print on it? What are you pressing it on?

[@lornacantu6255]

I just bought an epson ecotank printer I wanted it for sublimation printing,of course it comes with ink.do I need to buy a different kind of ink or I can use the one that comes with it?? TIA🥰

[@AngieHolden]

Try this: kzbin.info/www/bejne/Y5eXoHtorZKBq5I

[@victoriaperez7754]

Can you use the stimulation paper on cups as well ??

[@AngieHolden]

You have to use this paper on sublimation blanks and print it with sublimation ink. That is the only way it will work. But yes they do make cups that will work.

[@lyperez0218]

Do you know what is the difference between A-SUB 120G , 125G and 105G ?

[@AngieHolden]

It is supposed to be for designs with various levels of ink saturation. The higher the number the more ink.

[@ITSLIFEWITHTRUDY]

What are the settings to use with the heat press and also with the et 4700 printer?

[@AngieHolden]

Heat press depends on what you are pressing. You can find my printer settings here: kzbin.info/www/bejne/Y5eXoHtorZKBq5I&lc=UgwjHvltzM2dGYhfTc14AaABAg

[@spirchro36]

Good, thank you

[@AngieHolden]

No problem!

[@carriestroman1717]

Where do you get your T-shirt’s the 65% polyester and 35% Cotten I cannot find any

[@AngieHolden]

So many places. You can find them at your local store. Amazon. Other sublimation suppliers online.

[@maritzabarrientos1058]

( A-Sub )What category of paper does this fit into? pink backside or blue backside ? I don't know which color profile to download, jack print epson 2720

[@AngieHolden]

A sub has writing on the back and no pink or blue backside so I am unsure.

[@TheDanielShow24]

Loved your vid just one question, how do these brands of paper handle well when washed?

[@AngieHolden]

You don't wash the paper. You wash the ink that has been transferred to the shirt. The ink was the exact same in all three trials.

[@ForwardMovingDesigns]

Lol that's funny

[@MrDoom6969]

Did you give that NEW Ink away?

[@AngieHolden]

I did! Or someone is picking it up tomorrow!

[@itsnelyyy9391]

great video :)

[@AngieHolden]

Thanks for the visit!

[@Angela_Marie_Antom]

So I have a Epson 2850 put in my sub ink and used sub a paper and printed my image, went to press a poly tote and the image did not stick :( what am I doing wrong????

[@AngieHolden]

The only thing it could be is that you do not have sublimation ink. Check to see if the bottles say sublimation. Was there other ink in your printer before you added sublimation? It may not be all the way out.

[@randybliteki4946]

But which A sub is for dark colors ??

[@AngieHolden]

None of them. Try this: kzbin.info/www/bejne/nYKmi4WkmaeHf5o

[@kelliebryant4703]

I used two of the same papers you used and nothing comes off on my shirt. What am I doing wrong?

[@AngieHolden]

Did you print with a sublimation printer with sublimation ink installed? Try this: kzbin.info/www/bejne/Y5eXoHtorZKBq5I&lc=Ugy7Nc7i_NdDJc-qA4x4AaABAg

[@KStram25]

Do you have to use sublimation ink or can you use the Epson ink? Also if you have Epson ink in printer how can you change it out?

[@AngieHolden]

You have to use sublimation ink. You would have to flush the regular ink out though.

[@melaidarw75]

Hi Angie, can teflon sheet also be used as.protective paper? Or is this special for sublimation?

[@AngieHolden]

I would not use a teflon sheet. You can see more here: kzbin.info/www/bejne/sKOog5Zjbretfac

[@buttonsplaymusic4896]

How does it work with printing 'white'?

[@AngieHolden]

No this does not. A white toner printer is what you are looking for.

[@omairagarcia1137]

Hi Angie, I have a question ❓. Can we use any espon printer than espon eco tank et 4700? Because there are really price.

[@AngieHolden]

Any epson ecotank will work for sublimation.

[@Sunshine-pf4lf]

Do you mind sharing what is the difference between the Asub varieties. Some say 125G and 120G

[@AngieHolden]

I have not ran any tests between varieties!

[@floors1974]

I did same as you But the color is very low ..any tips please My printer es epson 3760

[@AngieHolden]

If it is your first print, I would print like 5 more sheets then press the 6th. Make sure you are pressing on polyester as well.

[@katt7922]

Do you need different sublimation paper to use on dark fabric?

[@AngieHolden]

I have a shirt that I am testing now. Video should be up week after next.

[@lifehouse8208]

Hi what type of shirt do you use? Cotton or blend etc

[@AngieHolden]

For sublimation, you always use polyester. At least 70% polyester is what I recommend.

[@armonhill3429]

so is A-sub only for white or light colors

[@AngieHolden]

Sublimation is only for white or light colors. Try this: kzbin.info/www/bejne/i3mYnaN5m8ppn7c

[@rosenunez8557]

I have the a sub (the one that’s on your right) but it doesn’t transfer to shirt and if I put temp to high it burns my shirts😭 what am I doing wrong?

[@AngieHolden]

My guess is you are not using sublimation ink. Try this video: kzbin.info/www/bejne/gorNYamJbtGCntU

[@donnaviolette324]

please help..... I have the A Sub paper and an epsom ET 2720.... but when I put in presentation matte paper..... the printer says paper doesn’t match setting..... i’m so lost.... can you help me

[@AngieHolden]

Just because you picked matte as you setting. I just click okay when it says that.

[@maryloustaley8150]

Can you use butcher paper in place of the paper you are using? I have a ton of butcher paper.

[@AngieHolden]

You have to print on sublimation paper. You can use butcher paper as protection when pressing though. That works fine!

[@maryloustaley8150]

@@AngieHolden Thank you!

[@jalajala4020]

What do you think of the new hiippo paper?

[@AngieHolden]

I really like it! I used it here: kzbin.info/www/bejne/eHPapYmee7WnfrM&lc=UgyUInN9Gh4i_fVxk494AaABAg

[@JessicaLPie]

Have you tried the Hiipoo ink with the Hiipoo sublimation paper?

[@AngieHolden]

I have their sublimation paper here and I will be trying it on a project soon!

[@claudiaestrada145]

May I know how do you print from beginning to end? I ask because my computer doesn’t have an option to select “MIRROR printing” unless I don’t see it :/ also, how do you switch the design around?

[@AngieHolden]

That is very specific to your computer and setup. But I did run through it here: kzbin.info/www/bejne/Y5eXoHtorZKBq5I&lc=UgwisgeF48FlFUff6xl4AaABAg

[@1proudmom2]

Did any bleed through paper when pressing?

[@AngieHolden]

I generally don't get bleed through but I always use protective paper just in case.

[@ednaanadio6552]

Could the shirts be 100% polester, any brand?

[@AngieHolden]

Try this: kzbin.info/www/bejne/mGXFkKOpqLClgZo

[@corarosinante8656]

Do you think you can link where to fond the protective paper

[@AngieHolden]

It is in the description below the video. You may have to click show more to see it.

[@rashujohn6086]

You didn't have to cut the image?

[@AngieHolden]

No reason to cut with sublimation.

[@Guitarpicker7919]

Can you use cotton T-shirts or just polyester?

[@AngieHolden]

Just polyester - at least 65% poly.

[@Guitarpicker7919]

@@AngieHolden Thank you!

[@tonealjenkins5908]

Hello i watch you all the time i am a new sublimation craft but i am having problems mirror my images please give me some suggestive thank you

[@AngieHolden]

Try this: kzbin.info/www/bejne/injEnZtslseJZ9k

[@kattiaesixx]

is hipoo highly recomended?

[@AngieHolden]

I have only used Hiipoo so I don't think I can weigh in either way!