Success with metallic thread starts with these 3 simple steps

  Рет қаралды 67,721

Nancy's Notions

Nancy's Notions

Күн бұрын

Пікірлер: 28
@saraalicea3363
@saraalicea3363 3 жыл бұрын
She was the greatest,❤️, we missed her very much 🪦
@itsmelaura1533
@itsmelaura1533 11 жыл бұрын
I love your videos. You make it clear and concise. You are one of my favorite video teachers. Thank you.
@54Lauram
@54Lauram 11 жыл бұрын
Thank you. There are so many tips out there for metallic threads. I am intimated by the threads. Will try your method & hope it works
@ladyhock1954
@ladyhock1954 8 жыл бұрын
Thank you Nancy. Love your show and tips.
@NancysNotions
@NancysNotions 8 жыл бұрын
Thank you Lady Hock! :)
@14bogota
@14bogota 2 жыл бұрын
Que sra tan espectacular ! Sus tutoriales siempre tan utiles y super instrutivos .dios la bendiga donde quiera q este🙏🙏🙏😍
@ixoxopaula
@ixoxopaula 2 жыл бұрын
Nancy you were the best. I will miss you.
@clarencesmith130
@clarencesmith130 Жыл бұрын
Any changes with the bobbin?
@missdebra100
@missdebra100 6 жыл бұрын
Always offered great information !
@saygoodgood4873
@saygoodgood4873 5 жыл бұрын
Thank you that was very helpful, I have singer brilliance 6160, Threaded the metallic on the top ( where we feed the poppin) tension on (1) , lowest speed I could achieve, had good results, now I just have to buy ( metallic needle) and hope for the best. Thank you again ❤️
@debbieoneal3371
@debbieoneal3371 3 жыл бұрын
Where do I get that thread holder?
@s.vennilasekar2201
@s.vennilasekar2201 5 жыл бұрын
Is the metallic thread can be used for hand embroidery...
@FrauK
@FrauK 11 жыл бұрын
Thanks!! Great lesson. Special the tread holder....
@s.vennilasekar2201
@s.vennilasekar2201 5 жыл бұрын
Is the thread can be used for hand embroidery... Pls reply
@flowersflowers5070
@flowersflowers5070 3 жыл бұрын
Can you see on paper with this thread? I do crafting as in junk journaling which uses paper.
@sylviabrown6617
@sylviabrown6617 8 жыл бұрын
I'll order the spool for the thread
@ceraselasimona5845
@ceraselasimona5845 8 ай бұрын
De unde putem cumpara acest fir?
@sylviabrown6617
@sylviabrown6617 8 жыл бұрын
so i can use the thread on a regular machine
@NancysNotions
@NancysNotions 8 жыл бұрын
Absolutely!
@sandyrock1607
@sandyrock1607 8 жыл бұрын
I cannot find the vertical spool pin on your web site. You called it a horizontal spool feeder.
@NancysNotions
@NancysNotions 8 жыл бұрын
Hi Sandy! We now recommend the Wonder Thread Guide for specialty threads, found here: www.nancysnotions.com/product/wonder+thread+guide.do?extid=ythtv&code=NNOADV-1320 Enjoy! :)
@211ssw
@211ssw 7 жыл бұрын
I just watched Superior Thread's video on the same topic & they say the opposite! When using a spool, metallics should have spool horizontal since vertical puts added spin on the thread. Cones need a net over bottom 1/2 of cone & thread through a stand for problem free results. They suggest a Topstitch needle & explain why.I am curious about who is correct!
@rosemason2071
@rosemason2071 6 жыл бұрын
211ssw i just watched another video also. He was right on with Nancy. He suggested two different needles. One was top stitch. The other was same as Nancy suggested. I have always found Nancy to be on top of things. He said if feeding horizontal to feed from bottom.
@bobbysjobbysdr7854
@bobbysjobbysdr7854 7 жыл бұрын
Where to buy the thread director
@NancysNotions
@NancysNotions 7 жыл бұрын
Hi Bobby, We currently sell a couple different versions of the one shown in the video. Please click on the nancysnotions.com links below to the thread directors we currently sell: www.nancysnotions.com/product/thread+director+thread+spool+pin.do?sortby=ourPicks&refType=4 www.nancysnotions.com/product/wonder+thread+guide.do?sortby=ourPicks&refType=1 If you have any questions about these products, please contact our Sewing & Product Advisors: www.nancysnotions.com/jump.do?itemID=5&itemType=LANDING&page=sewing_prod_advisor Thanks for watching!
@ReshmaKhan-iw3fb
@ReshmaKhan-iw3fb 11 жыл бұрын
Lovely...
@GMO--ge4ir
@GMO--ge4ir 4 жыл бұрын
I don't suppose you could embroider a car like that with a normal sewing machine that doesn't have computerized embroidery functions❓🤔
How to Sew with Metallic Thread
8:04
Melanie Ham
Рет қаралды 19 М.
How to Sew with Metallic Threads #WithoutTheHeadache🤯
3:57
WonderFil Specialty Threads
Рет қаралды 51 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
Give your rotary blades some TLC
6:27
Nancy's Notions
Рет қаралды 85 М.
Learn Nancy's favorite techniques for basting a quilt
6:25
Nancy's Notions
Рет қаралды 111 М.
Demonstrating Metallic Thread
5:03
Superior Threads
Рет қаралды 19 М.
Metallic Thread Embroidery Help & Tips
3:03
John Deer's Embroidery Legacy
Рет қаралды 61 М.
Learn to sew perfect circles in multiple sizes
8:15
Nancy's Notions
Рет қаралды 183 М.
Christopher Nejman - Metallic Thread Tips For Your Sewing Machine
24:40
Christopher Nejman
Рет қаралды 141 М.
Metallic Thread Tips - Recap
14:10
Christopher Nejman
Рет қаралды 11 М.