Summit Racing Pro LS Rotating Assemblies

[@clay3865]

Just picked up a set of Summit 3.898 " 3cc dome pistons and a set of Summit H beam 6.125 " connecting rods. I also bought the summit ring pack. They look great and I cant wait to put this little 346ci together and see how they perform.

[@dangerousfreedom4965]

C Lay does it come balanced?

[@devoncharpenter5744]

Which direction do these rods go in since they do not have an arrow?

[@clay3865]

@@devoncharpenter5744 One side is beveled and one side is not inside the rod journal. That's how you tell

[@clay3865]

@@dangerousfreedom4965 No sir

[@Cultofpersonality09129]

@@dangerousfreedom4965 nope…. and they take a lot of $$$ to get it done. The cranks so out of balance it’s ridiculous.

[@theswager95]

Cant wait to start ordering parts from you guys

[@SummitRacing]

Thanks for watching! We are here to help when you are ready.

[@johnbehneman1546]

Thank you so much!!!! Great upgrades for your LS build!!!! Thanks for sharing!!!!

[@johnbehneman1546]

Great video !!!! It looks cheaper to build my LS from brand new parts. To my specs no less. Do it once and do it right. Thanks for sharing. You made my day.

[@SummitRacing]

Thank you, John!

[@philistineau]

Well, I know what’s going in my next engine! 😀

[@dangerousfreedom4965]

philistineau 4”?

[@dieselburner4461]

You guys need to open a store in California !

[@SummitRacing]

You never know!

[@tonkatoytruck]

For under $3000usd in parts, you have yourself one, bulletproof, sbc short block.

[@reggieanderson885]

Stop it

[@ernestosalazar4590]

Does the kits come with wrist pins ? And if they don’t what is the correct ones for this kit ?

[@briancollins4949]

Can you get a balanced rotating assembly?

[@marx769]

Welp, it's been over a year. Can one get this balanced and ready to drop in, yet?

[@Funkyflykiwi]

Not balanced?

[@matt6951]

If I buy a rotating assembly, will it need balancing? Or can I slap it right in after a good dingle berry hone?

[@SummitRacing]

Thank you for your question Matt. At this time, the Pro LS rotating assemblies will need to be balanced by your local machine shop. We are looking into having balanced assemblies sometime in the future.

[@davidfarmerracing]

@@SummitRacing hurry!

[@darrellhughes6773]

I saw n a engine build where dey used 4032 pro ls pistons n a 6.0 iron block. Which pistons are better d 2618 r 4032 for d Lq4 6.0L

[@Onhaey]

Looks like my bare 6.0 block is gonna get some goodies

[@ch.i.c.o5922]

I ordered a forged pro ls crankshaft 3.622 58x from summit racing but I make a mistake my 6.0 ls have 24x reluctor what should I do , get that change or stick with 58x ?

[@curlynigero6417]

Thinking about getting a 383 rotating assembly I just get confused about wich pistons to go with I know I'm going with a stage 2 or 3 cam and maybe ls6 heads is there a piston that can accommodate this build with a lm7 block?

[@SummitRacing]

Hello Curley, A LM7 can be bored to LS1 bore size of 3.898 or the common 3.903 oversize. A SUM-R24409035 rotating assembly fits the 3.903 bore and includes the 4 in. stroker crank, 6.125 H Beam rods, rings, and bearings.

[@devoncharpenter5744]

Wich direction do you install these rods since they came with no directions and there is no directional arrow on the rods

[@767dag]

What a build for a turbo , -15 dished pistons @ .025-.030 ring gap ... ? Or is there reference? Different pistons and ring for that application?

[@SummitRacing]

Dave, We would need to know more information on your setup to get you the right combination. Here is a link to Summit Pro LS Rotating Assemblies to check out and narrow down your search results. If you need more assistance, please contact our sales team @ 1-800-230-3030.

[@mafosa8519]

Nice!... Larry

[@jeremyeubanks2387]

Can you get the flattop piston without 2cc dome?

[@SummitRacing]

Hi Jeremy, The pistons in the Pro LS line are done with the volume needed to hit target compression ratios. The only displacement out of (4.8/5.3/5.7/6.0/6.2/7.0) that a Flat Top achieves these targets is the 6.0L. All others needed a dish or slight dome to hit the targets. If you are in need of a different brand in a flat top, they are common and we’re just a phone call away.

[@jeremyeubanks2387]

@@SummitRacing I've got a 6.0 lq9 with .020 milled of the head and can't add anymore compression

[@amordeweso]

I just need my ls1 overhauled might as well get a forged assembly can I get a link to get this ?

[@SummitRacing]

Here is a link to all of our LS assemblies www.summitracing.com/search/brand/summit-racing/part-type/engine-rotating-kits To help choose just the right one for your application please contact our sales line at 1-800-230-3030

[@dangerousfreedom4965]

Do they come balanced?

[@SummitRacing]

Thank you for question. The assemblies don’t come balanced at this time, but we plan on adding that option to the mix in the future.

[@dangerousfreedom4965]

Summit Racing I guess I’ll be waiting to purchase a kit then.

[@matt6951]

@@SummitRacing ahh.. bummer

[@Cultofpersonality09129]

Nope. And you end up spending a fortune to get it balanced. The crank will need Mallory. It’ll be $500 minimum to have done. Better off buying a balanced kit of higher quality when you factor in the price. Not worth it.

[@dangerousfreedom4965]

Does this come balanced?

[@SummitRacing]

Thank you for your question, at present time (March 11, 2020) the assemblies don’t come balanced. Within the year, Summit is hoping to introduce a balanced option but the rollout would be incremental.