Super ATV Portal Gear Lift Install GEN 2 - Extreme UTV Tech

[@UnclePackysAdventures]

I bought a new RZR Dynamix and upgraded it because of this video.

[@BustedKnuckleVideo]

Awesome how do those shocks handle the portals?

[@UnclePackysAdventures]

@@BustedKnuckleVideo Awesome! My wife loves it in comfort mode

[@UnclePackysAdventures]

It's actually crazy how the dynamix system keeps it stable even on 6in portals and the 3-5 lift kit.

[@BustedKnuckleVideo]

Nice! I've got to do some shock tuning on mine

[@UnclePackysAdventures]

@@BustedKnuckleVideo I'm sure you do a little more with yours than I do. Did you go to my channel and see it?

[@jlandry92583]

What brand 30mm did you buy for the Castle nut, you said Lowes so I'm assuming kobalt? I have 2 out of 4 portals leaking so tomorrow night starts the breakdown and redoing the seals.

[@BustedKnuckleVideo]

not sure on the brand, shouldn't make a difference

[@jlandry92583]

@@BustedKnuckleVideo thanks

[@brianbinns4941]

Thanks for the video! I installed mine over the last few nights and the video was very helpful!

[@BustedKnuckleVideo]

Glad we could help!

[@oliversanchez2884]

Excellent video.... What brand are the billet high clearance radius rods?

[@BustedKnuckleVideo]

They are made by L&W Fab out of Georgia. We run them on all of our rigs

[@barharborbasher249]

Awesome job for making comprehensive easy-to-follow directions 🤘🏼looking forward to the next video 🍻 The V2 portals look WAY TOUGHER !! But I gotta say all this video does is piss me off that I live in a state with a 60” law 🖕🏻

[@BustedKnuckleVideo]

We will have the full blown test run video out soon!

[@cruisingthethaiway6881]

The sunrise trail has no limit

[@barharborbasher249]

Nor'easter Playa oho really lmao tell that to the wardens 😁 Trust me it’s 60” bud 👍🏻 I sat on 22,000$ cash waiting for a 1000 RZR4 for two year. I put on 13,000 miles on my old RZR4

[@BustedKnuckleVideo]

thats a crap ton of miles

[@richardmarler8637]

If you measure the toe-in while the suspension is hanging won't that measurement change when the vehicle is back on the ground? Of all the vehicles I've worked on the toe-in is always measured with the weight of the vehicle on the suspension.

[@BustedKnuckleVideo]

yes

[@FortyGritSandpaper]

Portals rock.... cause they keep good shaft angles and allow the needed lift to gain ground clearance without sacrificing the strength of the axle shaft angles..

[@BustedKnuckleVideo]

All very true, only downside is added width but I think it is worth it.

[@FortyGritSandpaper]

For competition and extreme park riding, it totally is. The trails are usually plenty wide, the extra width wheel to wheel increases stability.

[@BustedKnuckleVideo]

Bill Titwell not a single racer we run with uses these. I’d like to see if the gen2 portals can hold up to the abuse of racing.

[@stevegraves4524]

I really like your videos. You are a do it yourselfer. If that’s even a word. LoL. Thanks for sharing your knowledge.

[@BustedKnuckleVideo]

Thanks for tuning in!

[@concealit4800]

Also running a 32 how much top speed will I lose of I go with the 30 percent gear reduction vs the 15 ?? I already have some clutxh work done do u think a 15 gear reduction would be enough with my clutch work or 30 be better?

[@BustedKnuckleVideo]

I think there is no point in doing the 15, upgrade to some 34-35s and do the 30% and youll be happy

[@swoop-it4621]

Thx for video. Did both my portals/seal change today.

[@BustedKnuckleVideo]

Awesome, still no issues out of these

[@texasmade2684]

when you say gear reduction does that make your rzr slower?

[@BustedKnuckleVideo]

If you run the stock size tires yes, If you put 34-35s on it then no.

[@AdrenalineJunkieProd]

Great video guys!

[@BustedKnuckleVideo]

Thanks! We plan on putting the test run video out soon

[@SXSVideos]

I would love to see a video of this beast in action! I'm curious if it will hold up to the hill killing abuse that the other buggies go through. Any footage of this coming?

[@BustedKnuckleVideo]

Yes we have a full trail riding video coming soon where it gets put to the test

[@SXSVideos]

BustedKnuckleVideo awesome! I look forward to it!

[@kenshinhimura9387]

Do you think these portals could handle hitting jumps and racing or are these just for rock crawling and mud?

[@BustedKnuckleVideo]

With some mods they might hold up to racing and jumps. It is just a lot of leverage

[@robertjerger2786]

Awesome video... will fit macerick x3 xrs turbo , too ?

[@BustedKnuckleVideo]

They make them for X3s I believe

[@ricardofarfan5216]

What happened to part 2 of this video? Is it out yet.

[@BustedKnuckleVideo]

He is shooting it next weekend we hope

[@farritch]

Right On, can't wait to see it. Thanks!

[@marnielarocque9412]

dang son im an old disabled mechanic and i would have liked to see everything tightened with a torque wrench,

[@BustedKnuckleVideo]

It's not an engine so we use German Torque. GUDENTITE!

[@newlion7013]

How wider will these make the rzr?

[@BustedKnuckleVideo]

its probably 4" wider on each side

[@concealit4800]

Can I use the stock 14s on my 900 xp rzr there 1+5 front and rear and how much total width gain per side?

[@BustedKnuckleVideo]

I don't think stock tires will still work with portals

[@Crucial929]

i see that it was also a great time to upgrade to that ORB stuff ..

[@BustedKnuckleVideo]

It's always a good time to upgrade to ORB stuff

[@Rancher383]

What is the weight of that tire and wheel combo?

[@BustedKnuckleVideo]

A Lot! lol

[@hellhound2275]

Hello guys - i can not make caster on rear axle on my rzr xpr 2 seats- i try all shims but they all make wheel look outside - All suspension standard. What it can be

[@BustedKnuckleVideo]

Should be able to adjust your radius rods

[@justinwilson6123]

What size roctanes did you put on there?

[@BustedKnuckleVideo]

34s

[@069fastguy]

did u use a wood hammer with a claw to remove the spindle lol hahhaha that's awesome

[@BustedKnuckleVideo]

gotta do what you gotta do!

[@Jtgreen5623]

Love the cage, what company can I call to get one? Thanks

[@BustedKnuckleVideo]

Rocky Hollow Metal Fab

[@domstarkey7279]

what would a bare buggy like that run

[@BustedKnuckleVideo]

A 4 seat RZR that’s stock like this now can be had for cheap

[@domstarkey7279]

@BustedKnuckleVideo I was talking about the bouncer frame he was building

[@BustedKnuckleVideo]

chassis start at $5500 at www.bustedknuckleoffroad.com

[@domstarkey7279]

@@BustedKnuckleVideo didn't think Jake was messing with utv anymore

[@jmbell6338]

Tim Meeks....The Man The Myth The Legend

[@BustedKnuckleVideo]

Thats right 😂

[@connorburgess3314]

What a arms are on this rig?

[@BustedKnuckleVideo]

ORB Fabrication

[@doss26014]

If I buy a set, what would you charge to put them on since you have already done it? I live locally

[@BustedKnuckleVideo]

Locally to where? Rocky Hollow?

[@doss26014]

Close to Gadsden, I stay in Calhoun county

[@BustedKnuckleVideo]

Rocky Hollow might would do it, we are moving into a new shop in Cullman.

[@doss26014]

Ok thanks

[@BustedKnuckleVideo]

👍

[@stevegraves4524]

A (( Renli )) 1500 cc 1.5 Liter 4 cylinder motor. 108 HP 125 Ft-lbs torque at 3,000 rpms. Just look them up and see for yourself.

[@BustedKnuckleVideo]

not enough power

[@jamesmerritt4315]

Nice shop

[@BustedKnuckleVideo]

James Merritt RHMF has a nice place no doubt. We need a lift sponsor lol

[@timcruze11]

We really want to see the k5 finished though...

[@BustedKnuckleVideo]

kapes5nine the engine swap vid is coming soon!

[@mm64e50]

You put your hub and rotor on the wrong side and also put oil on those blue gaskets prior to install.

[@BustedKnuckleVideo]

hub and rotor on the wrong side?

[@mm64e50]

yeah rotor on backwards, slots face back not forward

[@demokelly]

someone buy that boy a real hammer lol..great video guys

[@BustedKnuckleVideo]

We have a Thor Hammer now!

[@demokelly]

@@BustedKnuckleVideo the claw hammer just wasnt right lol

[@BustedKnuckleVideo]

not at all

[@bryonsusedautos]

The only problem i see is you would get the 30% reduction while in HIGH also

[@BustedKnuckleVideo]

true but we have the larger tires so it somewhat evens out

[@wyattmunch2454]

What ever happened to the k 5

[@BustedKnuckleVideo]

it is still in the works, gotta go pick the new motor and trans for it up this week

[@stevegraves4524]

Super atv needs to make these portals for a Renli 1500 UTV.

[@BustedKnuckleVideo]

for a what?

[@davidmulvey6884]

you should use amsoil

[@BustedKnuckleVideo]

why?

[@jamesmerritt4315]

Got nice place myself not as big

[@BustedKnuckleVideo]

nice

[@jamesmerritt4315]

Come in handy

[@BustedKnuckleVideo]

no doubt

[@jamespitts9402]

I'd love a set but man are they pricey. ...... Not sponsored by Pittsburg tool. Lol

[@BustedKnuckleVideo]

We need a tool sponsor for sure!

[@ПогранВойска-б4м]

Класс! Покатушки

[@BustedKnuckleVideo]

👊

[@jamesmerritt4315]

Have lifts

[@BustedKnuckleVideo]

yeah we gotta get one or two

[@ПогранВойска-б4м]

Нету таких грамотных, а вы кто? Вообще и в частности

[@BustedKnuckleVideo]

Я Busted Knuckle, оператор и гонщик.

[@ПогранВойска-б4м]

Перевод на русском языке есть?

[@BustedKnuckleVideo]

еще нет, если вы не знаете кого-то, кто может перевести с английского?

[@timhottinger2166]

If you're going to make a video, do it somewhere there is not hammering. This is like a snuff film. Low budget

[@BustedKnuckleVideo]

it was the only shop we had access to at the time so get over it

[@timhottinger2166]

@@BustedKnuckleVideo If going to be that bad ,dont upload the video . Go back to video school and learn how.

[@adampark8341]

😴

[@BustedKnuckleVideo]

Portals for the win

[@gregnowling3128]

Get a real mechanics hammer, your not driving nails !

[@BustedKnuckleVideo]

We use what we got. No professional mechanics here.