SUPER TUNING MY TARGET BOW AAE EP 3

[@tjmperez]

Nick needs to be regular guest!!!

[@billhindorff8200]

I was glad to hear Nick say he thinks FOC matters. I also believe it matters. Not extreme FOC but I run 17.6% in my arrows and They perform GREAT..!!

[@GBBLGBL]

I know it is a limited group that appreciate this over the top super ABT stuff but I am one that does!! I watched this, tested this with in the previous video with my P4 and it WORKS! I also geeked out and got super picky with how my electrical tape is applied to my bare shaft after today's testing. If I just wrapped 20 +/- grains of tape on the shaft where the vanes normally are I ended up with a lip that gave my a pretty sold lip and a bad paper tear along with inconsistent bare shaft flight. I honestly feel that front leading edge of tape was catching air in flight. I was testing this this with my bare shaft at 50 yards. I tried a couple configurations and found if I taped the end of the shaft more like a bullet point it flew just phenomenal. The leading edge was a single wrap and each additional rotation of tape got thicker, with the thickest part being 2/3's of the way back and the tapering down. Dead center X at 50 yards with a bare shaft! Keep doing what you are doing Dan! This technical stuff never gets old. There are way too may intelligent people out there like Nick that need to share their knowledge to us. These last two videos were a real eye opener for me and I have been shooting for 40+ years and thought I knew almost everything there is to tuning!! Love it!!!I have always been a bare shaft believer and these last two videos concreted my process. I know there are many ways to get it done but this and now Nick's addition solidified it for me!! BTW 3/4" wide electrical tape is 1.8 GPI if anyone is wondering ☺

[@woodsdog7849]

Great serious. Excellent and informative. Great for the discerning bowhunter and 3d shooter.

[@RKeaton]

Great video and great info. Bring him back for hunting setups 🙏

[@awilliamz907]

Nick and MFJJ just talkin archery!

[@juanrodriguez-mu7ko]

Awesome! Definitely more videos with both you guys love it.

[@hakopawilkie5690]

I have loved all the content with Nick. Brilliant insights and results. ❤

[@mattsoutdoors7757]

Man all I have to say is this is good content. I do all my own tuning for my bows and all my friends and family's. I don't go this in depth at all with there bows or my bows. I do take alot of time to make shure they are timed and shoot perfect even with broadheads. But I am going to have to play with that bare shaft and torque tuning agen. Dan thanks for all the great tinkering.

[@FlyinFryman]

Nice! Defff flipped my whole tuning game up, and now I’m gonna add to my arsenal and tool belt,,, always been looking for/thinking about this, that extra thing to do/be/be better than the BEST, be your best self! > 💯 % , never stop learning, great job again Elk Shape! Keep ‘em coming! Send Em’🏹💪👍🙏

[@mikereed845]

The AAE Gripper with the built in slings are pretty cool too.

[@glenncharles6622]

This was a great series. Love the deep dive into tuning

[@WilliamAM43]

Glad to see the new target setup. I had a release misfire fly into a street and gave me a bad case of target panic, thinking the misfire could have killed someone. Enjoyed the tuning videos.

[@tylerroberts2146]

Awesome series! Definitely would like to see Nick make an appearance again

[@paulwallis4072]

I love my knob for my onnex hinge. Thanks for the lead Dan!

[@mikewalter6183]

NICK IS -THE MAN!

[@AlexOrlovallmountainsports]

Amazing! Superb info! Mine arrows are 509 gr,= 95 gr insert with 125 gr point.

[@emmasmomma511]

Awesome segment, please continue segments like these ❤

[@MostlyPeacefulCombatVet]

I’m really digging Nick, and his expertise! I appreciate it y’all! 👊🏼

[@steverichardson3031]

Thanks guys that was extremely informative.

[@Texaslivinoutdoors]

Always use anti-seize when threading dissimilar metals metals together, especially stainless steel and aluminum. As an engineer you should know that

[@davidpoolman2358]

Pretty awesome video. Wouldnt even attempt that without Nick standin beside me. Good Stuff

[@timsmith3548]

I had a wise choice do the same !! Carter took care of it for me.

[@royhoglund1322]

Good stuff! ABT!

[@the_sharp_carpenter]

Yeah these are the weeds i love wading through! Good stuff

[@Eric-bh7jy]

Where can we get more details for step by step in this process in written form?

[@christretiak2359]

Great content!! Definitely do more with nick. Maybe take a trip to aae head quarters. Pick Greg poole’s brain while your down there.

[@mlwalters73]

Hey Dan, do you by chance know when that prophecy qd comes out?

[@abnervidal3032]

Very good content I really enjoy it

[@MikeLeavitt-b2n]

Excellent video

[@jons7e]

torque tuning 🤯

[@topmodstv3682]

Man I wish I could have one of you guys tune my phase 4. I haven’t been doing this long enough to know everything and I don’t trust the shops around me. They know I’m not super experienced so I feel they do a half a** job. I couldn’t figure out why I can shoot a 2” group at 20-40 yds and can’t group past that. Shot it through paper and it’s way off. And rest is timed way off. Vanes are hitting it. That was right from the shop

[@VOODOOREIGN1]

Nice,.great info. What bow are you Shooting,Dan in this video?

[@GBBLGBL]

Also...Nick I have been doing some testing. I trimmed some of your Max Stealth's down to 2.25" in length and some Max Hunter's down to .50" in height with great results! Please build a Max Stealth II, or Max Hunter II. I am currently running the Max Pro in a 4 fletch just because of the .46" height with perfect flight but it would be nice of the Pro was a little longer. You need a vane that is +/- .50" tall and 2.0-2.24" long....it will sell!!

[@nickfisher9736]

The Max 23, been around quite along time😀

[@GBBLGBL]

@@nickfisher9736 23 is only .38" tall though? be awesome at that length and height of "at least" the Pro Max. I LOVE the Pro Max but wish is were 2"-2.3" in length.

[@jackbuendgen389]

Are you guys going to be at TAC Big Sky on Sunday? I really want to meet you guys

[@ВладимирПрименко-о5б]

It's easier to shoot a bareshaft from 25-30 m and more, then it's better to see what needs to be done with the rest.

[@tannerharris1483]

Dan, what t-handle allen wrenches are those?

[@willhampson5215]

Is the idea of torque tuning, torque to the left and arrow goes to the left then you push sight forward if you are left handed ?

[@dennisonhalwoodjr.558]

Dude! 🤯

[@LifeintheWildernessAK]

It is interesting how as an industry we think the newer shorter ATA bows are better... If you are looking for deadnuts accuracy we should really be looking at the target shooting industry... My best shooting bow EVER was a 38 ATA... Nationally, most people probably hunt from a stand of some sort... They really don't have to carry their bows that far. I think it is the industry pushing numbers or something different...

[@Njjb122]

Is that a qd drop away? I only ever seen that with blades im buying that right now

[@2ndAveScents]

Only problem with T handles I can’t find a set with every single size I need for my bows

[@larzgod]

Stainless socket head caps on black finish with that washer? Not on my bow.

[@dominikzulowenstein6563]

Hi Dan, how come you did not use the bridge lock system into the riser?

[@DirtyRedVI]

TRX does not have bridge lock

[@kylehoward5452]

Where can we buy that rest with the qd attachment?

[@dustinmayfield8096]

Wish the camera was a little more clear. Some of the video was no in focus so you couldn’t see what he was doing in fine detail, like what marks he was putting the rest on

[@TheBackwoodshunter]

PROPHECY QD. WHEN WILL THIS BE AVAILABLE ??????????

[@nickfisher9736]

We launched it on 6/12!

[@chrischristenson3519]

Was the bare shaft test done at 20 yards?

[@ElkShape]

I wanna say 30... Nick was hellbent on 30 if I remember correctly! -DS

[@joninisley6275]

How many bows do you have??

[@obionewheelkenobi689]

Just put a fixed blade on it get it hitting field points

[@gregorjames3156]

How many yards were they bare shaft tuning and torque tuning? I think 20 but not sure

[@ABQfitness]

I think 30 bare shaft. 50 torque

[@nicfield6895]

I think you might be on to something.

[@BergyBowsmith]

No such thing as a super tune . It's either tuned or it's not