Supercharged Predator 670cc Buggy Woods Rip ~ Blown 670cc

[@wycks-5095]

THAT STEERING WHEEL NOT BEING CLOCKED RIGHT IS KILLING ME WITH MY OCD...LOL

[@RedBeardsGarage]

I know lol forgot but knew people would go crazy about it

[@iainlangley]

I'm glad it's not just me, it's got me triggered! 🤪

[@neobreaker91]

Same here lol

[@secondhandlyon2603]

I didn't notice until you mentioned it.... damn

[@rayzor285]

Literally zero attempt was made

[@anthonyrybczynski5420]

The brand name on the engine doesn't matter. It doesn't matter if it's a bike engine or a lawnmower engine. An air pump is an air pump. You can port it and mill the head and achieve the same power as a street bike. The supercharger makes it even better. This is an awesome project.

[@MatthewJohnson-o4x]

Richard Holden tried this same charger on a 350 Chevy a it robbed from what his baseline was with out the charger. It takes more power to turn it than what it will produce so it’s killing this cart’s power bad

[@justincolhour-mcglothlin2307]

@@MatthewJohnson-o4xyou know that the best thing u ur a legend for uuu

[@johnsmith-oh2xo]

Your crazy that lawnmower engine will never make the power a 4 cylinder crotch rocket engine will make lol...

[@johnkilo3]

@@MatthewJohnson-o4x It's far too small a supercharger for a 350 Chevy...

[@elilachappa3330]

The exhaust note is so sick

[@Metallurge]

Holy cow I never thought I’d hear that sound out of a predator motor! Good stuff man

[@jeffjohnson3912]

So sick! I can’t help but stare at the off-center steering wheel. 😂

[@romulusxyz6722]

Man I was a senior level IT guy and left the field after 15 years to become a mechanic. I've been a powersports mechanic for a little over a year now, and while I've gained a good bit of knowledge (Yamaha certified on watercraft, still waiting on my BRP courses...), I learn a ton of shit from your vids. I appreciate you putting in the effort to record and produce them. You teach me a good bit about engines and performance upgrades. Thanks man. Edit: I've been working on a buggy design and was looking for engine ideas, came across this vid series. It's serendipity lol

[@timstewart567]

I would pay $100 for 10 minutes behind the wheel of that crazy ride! Nice job!

[@jacobkennedy6820]

oh, also, idea - Exntend the steering wheel toward driver and install quick detach so you can get the wheel in tighter but still get in the buggy. Love what you guys are doing. Thing looks like it could go very quick through that trail.

[@FordGTmaniac]

Performance670 has an adjustable billet flywheel that lets you mess around with ignition timing, which is something you'd want to do when running a boosted engine. There's probably a few extra horsepower to be had with one of those.

[@phoenixlove76]

Likely pick up power faster too

[@MisterMayhem727]

First thing first. Respect man, you are one hell of a driver for real. You made that technical trail in the trees look effortless and obviously it's a lot more technical than you made it look by using the throttle to slide the ass of that thing and counter steering through it. I didn't see anyone else notice that and say anything but I caught what you was doing and understand the skill I was seeing here. Mad respect to a real driver with real skill.

[@floydrhodesiv5733]

Great build ! Old Red Beard goes by my motto " Go Like Hell, Im Gonna " !

[@RedBeardsGarage]

Going to do even more on the next video! Thanks for watching.

[@justlive56]

Love this build as is, keep the 670 on it!

[@MegaMeaty]

I am amazed at the power they got out of that cheap chinese motor. I want to build something road legal with that. I estimate I can do it with about 3 grand in parts, and tubing.

[@jurassicreptiles4284]

Man U don’t know how much I want this thing I’ve been crying about it

[@shaunthompson1935]

That knows those trails like the back of his hand

[@ghomerhust]

wow, that thing shreds up the hill climb. what a beast! looks like the handling is pretty dialed in too, dodging trees really easily

[@maverickkartracing]

that thing looks pretty smooth on the trails from the camera. Always impressed with how much power you can get out of that motor... I want one on a golf cart.

[@twizteddiesel7320]

I’ve enjoyed watching the build of this thing… I’ve been out of work for the past couple of weeks due to a severe broken leg with having surgery for plates and screws in my leg I’ve only started watching a day or so and am gonna watch other builds as well keep doing what you do and god bless you and your family

[@jacoblittle989]

Dang dude, hope your leg gets better soon. I've been waiting for this episode for so long.

[@twizteddiesel7320]

@@jacoblittle989 thanks man can't put any weight on it for another 4 weeks plus have to do PT witch is gonna suck but just something that has to be done I have 9 screws in my leg with about a 6" to 8" plate... it was dislocated plus fractured both bones in leg at ankle joint so yea it's pretty bad but I'm getting used to it feels like it has been 3 months since accident but only been 2 weeks lol I'm so bored sitting inside the house bc I'm used to working non stop 14 to 16 hour days 6 days a week but yea just started watching RBG and have enjoyed all the videos may start changing things on the go cart that I have and modifying things while I'm out of work

[@jacoblittle989]

@@twizteddiesel7320I am a non stop worker too. I work from 8 to 5:30 mon-friday so sitting ain't my strong suit either. if you don't mind me asking, how did you break it?

[@RedBeardsGarage]

Well brother we wish you the best. I know that has to be tough. Hang in there and we will try to keep feeding you content so you don't get board lol

[@isaack1279]

@@RedBeardsGarage bored*

[@beenstork]

You have put in so much hard play (work) to make this channel a success. You guys always do such cool projects. I’m super envious of what you get to do on a regular basis. Keep up the good work. You have the best cart/mini bike/ buggy channel on KZbin, and there are a lot of good ones but not as good as RBG

[@RedBeardsGarage]

There's been a ton of hard work but it's been worth it! I appreciate the support sir!!

[@mistermacgray]

Got sent your way via a buddy because my other channels I've run out of content and caught up on so now to see how yours is as so far I like it. Subbed.

[@FloridaMan0561]

Ole Red Beard was tearing sh*t up in that buggy!

[@villagelightsmith4375]

"Blaster?" Yep! Good products, price is right, the stuff works! Your sponsorship reminds me; next loop through the hardware, I need a few more cans of the stuff. Thanks for your honest style and evaluations. Jerry.

[@bigwater52]

Definitely still needed some more weight at this point in time. It’s crazy, that this little motor is doing what it does

[@sharkbaitouahha_gaming263]

I love this buggy so much. Have been waiting for another. Video on it for ever lol can’t wait to see how much power she’s making.

[@Hatch61]

Blaster is great, I get it at my local Tractor Supply. I never leave without at least one can. Great content, I enjoy your channel, God bless, and stay safe.

[@bryduhbikeguy]

I bought 2 types because of their sponsorship too.

[@RedBeardsGarage]

Thanks for supporting ya boy!

[@aurtisanminer2827]

I like the new trigger limiter on those PB blaster cans.

[@syarif_rc_channel]

I like your modifications

[@farmnranchapiarybeehiveser8120]

It's absolutely ripping up the trail. I'm about finished with building my ultra light airplane. Thinking of this engine upgraded with the AMR supercharger. Only thing I'll probably put a Aviation carb on instead. Since I can adjust the mixture on the fly so to speak. You do that for altitude by watching cylinder head temperature.

[@rodswim492]

Out standing tuning. The motor is purring.

[@InsaneArchitecture]

This thing needs to take a lap on the carsandcameras grand prix. New record holder for sure!

[@marvicty]

Nothing like the sound of a 670 thumper!!!!!

[@ians1464]

I built one the neighbor's thought it was a Harley

[@padrescout]

Wow. What a loud machine you have created

[@joshvandruff1790]

That things a monster! Love it. Keep up the great work y’all!

[@delmas15]

Absolutely AWESOME build. A real testament to you and your teams talents!!

[@joshuagarcia8547]

Man 14 psi is beast.red beards start to be a boost creep.nice

[@BHS75780]

The sound coming from that engine is glorious 🥲 ya just can't beat the sound of a v twin especially after it's been supercharged, Love it.

[@Robert-k7m]

While going threw the woods, my 1st thought was AWD LOL GR8 VID 😇🙏👍🥳

[@ryans750]

15:58 RIP Sunflower. Also I bet it wouldn't spin with the back and front wheels driven.....

[@RedBeardsGarage]

You know I was mowing a few days later and was like awww our sunflower died... Few days later I was editing this video and was like ahhh I killed it.

[@thedude7726]

@@RedBeardsGarage lmao

[@huntnwithhunter4047]

Man I gotta build my mud motor like this one.👍

[@Chopped93VX]

Just think about this; a long time into the future, someone will probably find this beast if a machine sitting in someone's shed or barn, sit in awe of its craft, and wonder what mad man built that.

[@kenjohnson5498]

That thing looks smooth on the field

[@BigDaddysYouTube]

Wow, that's a very nice build. I've just started following you so this is only the second video of yours that I've watched. The most important feature that I see is you've got your 4 or 5 point harnesses, to keep the driver in the seat. That long travel suspension increases the vehicles off-road capabilities and makes for a smooth ride, very nice job. Impressive engineering, stay safe.

[@Tomsfoolery.]

Awesome build! Couldn't you just machine a smidge off that driven pulley sheath so it doesn't contact the CV axle boot?

[@Rattus-Norvegicus]

That or if you want to get janky you could try putting a ziptie on the boot and try squeezing it in a little bit.

[@shannondunn5437]

I thought same thing

[@ogt92fromthe1step9]

A small Machinist cross vise and a cutting tool then run the motor. All you really need is to take a couple thou off he said it's just barely making contact. Hell if you want to get super janky you can do it with sandpaper and a stick 🤣

[@panteraowns2515]

My ocd is serious. That steering wheel being so off.......m.m

[@mikellewis2346]

Taken a smidge off the edge of the clutch is what first came to my mind when he said that also. If it's only a few mil touching then that's shouldn't hurt the clutch.

[@Tmanstomp100]

man that thing rips and it sounds AWESOME

[@beachinrc101]

That’s sweet lol nice 👍🏼 job on the clutch!!!!

[@BigIronTexas]

This build series is like crack! I just binge watched every single episode. 😵 You've combined two of my favorite things here, welding/fabrication and off road buggies. Sweet!!

[@CJLeTeff]

You should weld a bar on that bolt so you can spin it by hand if you’re away from tools, and need to change a belt.

[@tonytaylor5789]

It sounds amazing.

[@earlsinoz]

What a friggin beast man!!!

[@NBrogdon45]

I've been waiting for this one to drop, now I can't sit still and I'm going to be going nuts for the next hour and a half! 😂

[@RedBeardsGarage]

Hope you enjoyed it sir

[@NBrogdon45]

@@RedBeardsGarage I'm enjoying it so far! I need to get with you on doing some work for me. I've got what used to be a "Murray Kilowatt" That I'm wanting dual upper and lower control arms front and rear.

[@billyschannel997]

Blaster silicone spray is top tier

[@mferrarorace]

The beast sounds great!

[@jitsnydzer6302]

Its funny that you mentioned it at the end because I decided to say something half way through the video. My ltz400 had a set of mudlites like those just a lot wider on it when I got it and I noticed those tires are grippier than you would think in super loose dirt, but have no traction in grass and foliage. I swear by "cleat" style tread because they have grip EVERYWHERE but unfortunately I don't think they sell them in utility atv/utv sizes like your running.

[@jondavidmcnabb]

That was a fantastic video! Grind Hard has some competition now! Price for failure in the forest is high!!!!

[@jardim23]

Those trails by your house are awesome, would literally spend all day there if i lived where you do lol

[@tarheelpowersaws9619]

Omg! I want 1!!!!! That thing is SICK!

[@joeseiber5103]

Been waiting forever on this!

[@martyduggan8047]

Y’all’s channel rocks best content on KZbin! Big fan of RBG 🤙🏼

[@kevinjohnson9372]

This little thing is a monster 👻 bro

[@chadmiller8019]

I asked for it. And it showed up! Hell yeah@

[@scottoberhouse8602]

One bad ass ripping machine..looks like one heck of a time

[@seastacker8582]

Dude. This thing is bad ass! Nice build. Dale at Dirty Dawg sets up all my Polaris sxs stuff. He’s the best there is.

[@SamZStuff]

You guys have a sweet sponsor

[@amicidavinci]

That engine sounds fantastic

[@jasonh3220]

I love it .. The sound is amazing and it looks fun as hell. One day i want to build one similar :)

[@smallcityhomesteaders1600]

That is absolutely awsome! Wow! I've been nuts about go karts mt whole life i i'll tell you what.....that machine rite there would ruin me. I wouldnt wanna do anything else but rip that thing everywhere. Awsome build brother!

[@lizzard7473]

Awsome video the buggy looks cool in the trail

[@hammerT2997]

Hell yeah man!!! She's a beast brother!!!

[@carnivorecave]

That looks and sounds Awesome. Sounds like a dragster...

[@Tota1Everything]

People use them for drag engines

[@SportbikerNZ]

Excellent vid. Watching this thing rip was awesome. I personally prefer that it's not a motorcycle engine. This thing is far more unique.

[@RedBeardsGarage]

I agree! Thanks for watching!

[@famousj6]

I'm loving the jackwagon poster.

[@domenicozagari2443]

Could ad a piece of pipe to support the pipes that run parallel.

[@christopherallen9615]

If people are wanting you to put a motorcycle engine on that thing, they just don't know LOL. That thing is amazing plus you're showing what a person can do by using Harbor Freight or other type of budget engines. I think this whole build idea was awesome and you did a great job showing. Sometime if you get a motorcycle engine, build a different kind of buggy and put that on there. I think this buggy is perfect the way it is., maybe throw some paint on it LOL. Actually, I would powder coat the whole thing.

[@craigengelman4534]

are you nuts ! budget engine my ass theres over 10 grand in the motor alone! i built my buggy 4 years ago i did mine like a rock bouncer . mine has toyota axles cut down to 50 inches wide . suzuki sammy transfer case and a 200 hp 1000cc triple thundercat motor from a snowmobile . in 4wl with 37 inch pitbull rocker tires in the woods its a monster and will climb over anything . in 4wh i put paddle tires all the way around and it has NEVER been stuck in the mud . now put it in 2wd i use hoosier 10 inch wide oval racing tires and have raced at limerock speedway . my motor costed me $2500 in parts and i did all the work .

[@Tyler-ts2ld]

@@craigengelman4534 actually that Predator 670 V Twin is cheap, and stupid cheap to build.

[@craigengelman4534]

@@Tyler-ts2ld cost for parts for that motor is insane ! i just got a thundercat 900 for $700 150 hp triple 900 2 stroke . i dont care what you find for the motor it will NEVER touch that motor E-V-E-R

[@christophermorin9036]

16:00 RIP sunflower. :(

[@luciankristov6436]

I think everyone loves blaster . I dont know anyone who doesn't. I use their products since forever ago lol

[@wht240sxka]

That exhaust is so sick!

[@mxcollin95]

You need to turn that GoPro around so we can checkout the rooster tail. I’d love to see how much dirt that motor is flinging!

[@devinowen85]

Man that wheel is killing me and em scales hmmm after 5 somewhere lol love the vids.

[@etardadventures9030]

Dang it climbed the hill climb like butter

[@kartguy]

Sick course looks fun!

[@davidowen888]

Cool build 😎smooth as gravy running over my tators, I need one uh dem

[@noahgrady3628]

Eeeeeeeeewwww I loooove it!! Get in mah belly!!! Dude it rips!! I WANT one!!

[@sashawidener213]

COUSIN RED BEARD!! You should do the world's baddest gas bike.

[@tires2burn]

Put a caliper on your spring. The larger wire is stronger. How many times have you hooked a spindle going through those trees?

[@zme1936]

Blaster is really good. Good bye w40 . Blaster works awsome

[@trupinion512]

It appears Performance 670 is no longer supporting this build.. The cam link goes to a blank page and can not be found in their catalog. Any other recommendations?

[@corymcbride5394]

Big boy buggy love it 😊

[@davidjessee7701]

Wow!! What a ripper!!!

[@ainajannah6328]

Amazing brother

[@RedBeardsGarage]

Thanks

[@bryanteel3046]

Absolutely no to a motorcycle engine! that 670 is a beast! Just some better tires would help a million. She spins 100% of the time that you're on the throttle. What a ripper!

[@dirtbiker5182]

Killer woods section but damn you cut those trees close.

[@RedBeardsGarage]

Yeah we're going to clear some of those lol

[@Tractorboy1986]

Next dust bowl event with C&C at yours? Only rule: no yard karts, you won't make it 😂

[@donaldluallen1152]

That's a badass little buggy

[@CBALLEN]

Man ,that thing is covering a lot of ground, quick!

[@nitewatch2.027]

She sounds awesome Greg,, great job,,,,,, but I’m still partial to Gravy Bones

[@79Dakine]

That thing is a monster

[@mattharrison3388]

Red Beard, i have that same go kart with the 150cc engine on it. It is completely gutless. It's not blowing blue smoke so i don't think the engine needs to be rebuilt, what do you think.

[@Dan.a.k.a.bradpitt]

You wanna hear somethin crazy , that sounds and runs almost identical or pretty much identical to my Ryker 600 w tune and other mods . The engine note , the cvt , thats insane .

[@joevendramin9509]

What a beast!

[@williamlanphar630]

Blaster is the bomb....I use many versions.

[@Thedriver96207]

Certainly makes a good noise!