"This is called survivorship bias. You don't hear about the failures because those people are dead." Heh.
@mikealbrecht39903 жыл бұрын
There are old pilots and there are foolish pilots. There are no old, foolish pilots.
@sparkeyjones62613 жыл бұрын
@@mikealbrecht3990 The old saying is bold pilots, not foolish pilots. Makes a bit more sense that way.
@deankay44343 жыл бұрын
So I should check how old my pilot light is on the water heater?
@CenobiteBeldar3 жыл бұрын
@@deankay4434 No, you should check how bold it is, you S.O.B.
@MarttiSuomivuori3 жыл бұрын
They counted the bullet holes in bombers that made it back to the base. Surprisingly there were very few hits in the engines or the cockpit area...imagine!
@collinryser3 жыл бұрын
I’m so glad I found this channel. I subscribed within 15 seconds of this video. Also, “You don’t hear about the failures because those people are dead” absolutely killed me. Keep it up. 🙌🏻
@botcontador32863 жыл бұрын
We shouldn't hear from you cause you were killed. Just saying...
@yutub5613 жыл бұрын
@@botcontador3286 huh?
@botcontador32863 жыл бұрын
@@yutub561 Collin said the joke "killed" him. That is why I said we should not be hearing from him. Ok, granted, stupid joke of mine.
@yutub5613 жыл бұрын
@@botcontador3286 I'm facepalming at myself for not getting it sooner...
@RossomeSauce18 ай бұрын
Fancy seeing you here lol
@DaniilMalevannyi3 жыл бұрын
I just spent ungodly amount of money to get new brake lines done and this video just adds salt to my wounds. Still funny tho
@termx2603 жыл бұрын
Зато тормоза работают)
@walkernottexasranger75653 жыл бұрын
Mechanics need to make their money somehow! Haha To be fair, it does take a significant amount of time
@meabob3 жыл бұрын
Do a set before you get upset. It's not so easy on a production vehicle.
@dsauce87803 жыл бұрын
To be completely honest after what I just went through relocating an HCU on an ABS unit in Mercury Marauder for a Eaton swap I actually don’t think I could pay someone to do it correctly. I used Copper coated steel lines.
@jonathanbarnes37923 жыл бұрын
It DOES cost an ungodly amount of money because it is still time consuming even with the modernized tool and material advancements. You can now get a higher quality job done but not necessarily cheaper.
@Automated14 Жыл бұрын
I’m blown away by how concise and useful this video is. No music, no yucking it up, no nonsense
@bernibeckmann97533 жыл бұрын
Here for the jokes. Somebody else does my brake lines. Thanks.
@stevepearce66893 жыл бұрын
Berni is here all week. Try the veal
@POVmotorsport3 жыл бұрын
Same, and totally worth it.
@12x2richter3 жыл бұрын
If someone else does the brakes for you, they should stop.
@bernibeckmann97533 жыл бұрын
@@12x2richter they do stop, never had a brake failure. Who builds the short bus you ride in?
@joelarson17333 жыл бұрын
@@bernibeckmann9753 Did you... did you not get the joke he made? And you repeated?
@jaredj63126 күн бұрын
Damn, you are a good teacher. I wish more car channels were like this. I feel like I learned something, even though I already knew everything you said, but like separately, not together.
@yutub5613 жыл бұрын
I swear you can read my mind... I'm in the planning stages of my build while I save up for a wedding, and I found your channel from your re-wire your whole damn car video. Yesterday I was planning brake system and wondering what I needed to do to make it from scratch. Now here you are again. Thank you!
@SuperfastMatt3 жыл бұрын
Consider it a wedding gift. Congratulations!
@yutub5613 жыл бұрын
@@SuperfastMatt thanks! Keep up the awesome work
@daleolson35063 жыл бұрын
Quick get your project done,and drive as far away as possible. Do not get married.
@yutub5613 жыл бұрын
@@daleolson3506 sad when I hear guys who resent their wives telling young guys not to get married. My future wife took out loans to pay for the majority of ours so I can save up for car parts. She supported me when I told her, while trying to pay for the wedding, that I was going to buy a rusty BMW from 84 with no engine or interior. Sounds like you picked a bad apple. No woman is worth rolling over for and sacrificing the things that make you happy.
@stevejohnson16853 жыл бұрын
On our first date, my crappy old car's starter failed. My wife crawled under the car with a wrench, removed the starter, we took it to the junkyard & bought a re-built, then she crawled back under the car and installed it. Married that woman!
@hpa1013 жыл бұрын
Loving your content dude, especially the odd dose of dry humour 🤘 - Taz.
@joeyprado9886 Жыл бұрын
Bro.... you are the definition of AI... (ACTUAL INTELLIGENCE) and much appreciated. Both from an intellectual and facetious standpoint. Keep it coming man.
@RANDOMNATION9073 жыл бұрын
Straight silicone grease, like Dow D111 or a good quality silicone dielectric grease, does not react with brake fluid and attack rubber parts. Make absolutely certain it does not contain any petroleum products in it. I've been using it when rebuilding calipers and wheel cylinders as a professional mechanic for 30+ years without issue. In fact, it will greatly extent the function of brake cylinders as it completely prevents corrosion. Not to mention re-assembly is much improved. I also use it when flaring and on the threads of bleeder screws to act as a viscous gasket when bleeding brakes. Works awesome. Just thought I'd pass on a a piece of knowledge. Just watched a few of your videos. I'm new to the channel. Subed.
@craighearn7472 жыл бұрын
Good comment on the Dow product? I used it on many application where a rubber gasket in plumbing is in contact with water 100% of the time and when coated with Dow the material is never degraded by the water. Wall hung urinals have a rubber cone gasket and once coated seem to last forever. You comment gave me other ideas.
@billsmith22122 жыл бұрын
I put a thin film of Never Seize on the bleeder threads . When replacing brake lines , hoses , calipers or wheel cylinders , I also put Never Seize on the threads . A little insurance in the Northeast against corrosion .
@bcary4613 жыл бұрын
I love the "you know what, I'm just gonna buy one." Motive pressure bleeder has saved me soo much time on all sorts of jobs.
@OutOfOrderGarage2 жыл бұрын
I use an old double flaring tool like the 14.99 one you show on steel and the copper/nickel lines. I get every flare right the first time. The key is to cut the end square, deburr the inside and slightly chamfer the outside.
@9lbloodnolast8734 ай бұрын
Yep. I heard that part and cringed. It's not a tool issue; it's an operator issue. The key is to understand how to use the tool. First step on the cheap handheld tool's instructions for double flaring: "1. Straighten tubing as much as possible. Make clean cut straight across tube to avoid a crooked flare. Deburr inner and outer edges." My thought. The guy goes over spending money on tools and suggests you buy an expensive amazon cheap tool that carries a large price tag that he has an affiliate link for instead of the harbor freight one for 1/10th of the price.
@MarioPk3 жыл бұрын
This is a DIN-standardized German comment for the algorithm.
@stevepearce66893 жыл бұрын
All hale the DIN
@PFCKruger3 жыл бұрын
Was ist das denn? Was ist geschehen?
@GriderTornado3 жыл бұрын
HANZ GET ZE DIN EN ISO 9001!
@hansdietrich833 жыл бұрын
Wer ist dieser Norm von dem alle sprechen?
@MePeterNicholls3 жыл бұрын
Fantastisch
@67Redlines2 жыл бұрын
Dude...your information is spot on...sense of humor is on target...did I learn something, YES? Check twice when sliding on the nut, that its not backwards....Ugh! I did this twice.
@natesteiner54603 жыл бұрын
If you are inclined to incorporate loops into the lines, orient them horizontally so as not to trap bubbles. The self (gravity) bleeding advantage of mounting the master cylinder high on the firewall is lost if little bubble traps are built into the lines.
@mikec5555553 жыл бұрын
Don't you mean vertically?
@GriderTornado3 жыл бұрын
@@mikec555555 vertically is the bad thing like at 6:05. The air bubbles from somewhere down below will travel upwards and get stuck in the first loop at the top. That is why Nate Steiner said to orient them horizontally
@johnterpack39403 жыл бұрын
Yup, that's the way I've always seen it on OEMs over the years.
@crackedemerald49303 жыл бұрын
@@mikec555555 the main confusion i see here is on what axis people consider the loop to be oriented. I imagine it's orientation being the axis an imaginary axle would point if you made it snug to the inside of the coil, like an electromagnet. Other people seem to see what orientation the lines themselves go up and down towards.
@barmetler2 жыл бұрын
Good point
@timbosinius36532 жыл бұрын
You were spot on about the flaring tool. As a hobbyist, I hesitated to buy it as it does have a huge price tag. But as the saying goes - if you buy cheaply, you pay dearly. Today, I did my first brake line for my Morgan 4/4 and the flaring tool you recommended made it super simple. Without this video - I might not have dared to tackle this task myself. Greetings from the DIN motherland and a huge Thank you.
@addictedtopiano3 жыл бұрын
I'm actually working with DIN/EN/ISO standards and OEM parts at our software company here in Germany so the brake line flare bit made me chuckle :)
@tonynightingale4400 Жыл бұрын
Hi , I've been working on and making brake pipes since the 1970s and have seen many horrible examples from so called professional workshops. It's so good to see someone who is proud to display their work for the whole internet to view.......I agree with your method's and uphold your workmanship and examples. Please carry on and perhaps people will once again find pride in their work ..😀😀😀
@knottreel3 жыл бұрын
This is an amazing video, didn't have to hear about aunt Mae's goiter or your life's history, just got right to the point and gave clear instructions at a good pace. Thanks
@70Superbird3 жыл бұрын
I like your style. Your casual attitude and narrating is entertaining! Plus I learned a few things along the way! Thanks Matt.
@christofschwarz66023 жыл бұрын
Austrian here: Hey, Matt - Chop an old Jag up, or weld a Marcuswagen to a Model S Tesla and install a Lada engine into it for the lolz - fine - but NEVER dare to call this abomination, you posted a Schnitzel! NEVER! It has "Tunke" (Sauce) on it! Tunke makes the bread crumb coating on it go all soft and spongy and just awful! Schnitzel are to be touched by salt and a hint of lemon juice - nothing more! Only then, the delicious crunchiness of the coating, the freshness of the lemon, and the subtle taste of the salt can truly be enjoyed! ;) (This is meant to be funny. Background is, that Germans love their Schnitzel with Sauce, while Austrians HATE sauce on breadcrumb coated Schnitzel. And because we are still a little bit bitter about living in the rotting insignificant remains of a once world power, we like to try to force our way on everyone else. Especially, when it comes to a meal, thats named after our capital - Wiener Schnitzel - never mind, that we stole that from Milano.) But honestly: Enjoy your Schnitzel,your brake lines or your car the way you like it - even with Tunke, .... :) And keep your work up - we love it :)
@ANproCUBE3 жыл бұрын
Also Austrian here As said, pretty much only salt and lemon juice are allowed to be added. But it is common to also add a little bit of stewed cranberries ("Preiselbeerkompott"). In case someone wants a little bit of sweetness.
@Shoopadawhoopa3 жыл бұрын
German here. I never understood why anyone wants sauce on their schnitzel. There's even a thing called "Jägerschnitzel" with that ugly, bad tasting brown sauce on it. I prefer the austrian way: schnitzel (salt+lemon) and fried potatoes with bacon. It's just amazing
@FRITZI9993 жыл бұрын
German here ... this is a Stereotype about Germans. We NEVER eat Schnitzel with Sauce. Only a dish called "Jägerschnitzel" needs a Sauce cause it has NO breadcrumb Coating !
@12x2richter3 жыл бұрын
Funny, speaking as an American it doesn't look ANYTHING like what you get at the Wienerschnitzel.
@davesteinick8333 жыл бұрын
Name one other site on the interwebs where one can learn about brakes and German fare all on one post. I'll wait patiently. Oddly enough, I'm German, and I'm not certain I've ever had a Schnitzel. ...or Tunke... ...I do have brakes, though.
@itsyakoba7537Ай бұрын
Found your channel again and you’re giving me the confidence and instruction on how best to start a project. Thank you
@tolgabasarr30913 жыл бұрын
Pushing the brake pedal for your dad 😂😂😂 Brings back memories...
@TheMrtMts3 жыл бұрын
My teenage daughters are the available source of leg muscle for me 😀
@Rob-lz5iz3 жыл бұрын
I remember "Pump it!, I did!, Did you pump it?! Yes, I pumped it! OK hold it! I'm holding it! Did it go to the floor?? I think so! Do you feel any pedal?! I don't know! For Petes sake! "
@MikkoRantalainen5 ай бұрын
Still doing the "press and hold the brake pedal for bleeding" thing with my dad. He's only 73 years old. When you have two knowledgeable people doing the job, pressing the brake pedal method is very fast and requires practically no setup.
@fastboi273027 күн бұрын
Yeah, I used to press the brake pedal for his dad, too.
@seyoch3 жыл бұрын
I wish every video on youtube was this good in giving a lot of good information while telling it in such a funny way! love it!
@amiamso3 жыл бұрын
Thank You for a Great video! I twisted a wrench professionally for a number of years and brakes were one of my specialties. After watching this, I have to say, this is one of the most inclusive and succinct videos on brakes I've seen. You covered the basics and nailed the details. My 65 EV Ranchero is setup very much the same...... again Great Job!
@bubbadove54792 ай бұрын
Definitely the BEST DIY video I've seen for brake bleeding.
@danderson98813 жыл бұрын
Great tip on using a dab of break fluid while flaring! I've also gravity bled brakes-to rid the system of air, it helps. Still need to bleed.
@parrotraiser65413 жыл бұрын
Some dual-cylinder brakes use a cross-over separation, rather than a front/rear split. (I.e. one drives Left front & right rear brake, the other right front and left rear.) That way, the result is a degraded but still balanced (half) system, less likely to misbehave than if one end's down..
@morganfreeman51713 жыл бұрын
Also double X / double H / Triangle (volvo) patterns exist on higher end, faster or heavier vehicules !
@mokeimusic2 жыл бұрын
AMC did this with their cars.
@aaronschocke21472 жыл бұрын
I don't know if this is Deja vu, or if this thread was copied verbatum elsewhere, because I remember these exact words, followed by a LONG thread arguing over which is better. I remember the conclusion being that it was a horrible Idea. Lol
@notsam498 Жыл бұрын
Then you have newer cars with abs modules that have a brake line going to each wheel separately from the abs module. This is because abs modules run double duty as part of the three stability and trac control system.
@eb110americana Жыл бұрын
@@notsam498 Yes, I want to say pretty much every new car today has an ABS distribution block, which facilitates 4-channel ABS for now mandatory traction and stability control.
@Cdrsan3 жыл бұрын
This comes out right as I'm thinking about replacing the brakes and lines on my car, awesome :)
@kramer263 жыл бұрын
Is it a Mercedes by any chance? One of the few cars I've seen them actually rot out on...
@petercortez34122 жыл бұрын
Man I appreciate your knowledge and wit.I have been through 1000's of you tube videos and you are legitimately the King.please accept this👉👑
@ronwalsh3 жыл бұрын
I have to say, this video came out at a good time. Replacing the 56 year old lines on my MGB was not really something I was looking forward to. I purchased the bulk line some time ago, now I know which tool I need to do the flaring. Thanks for posting this.
@dannybrennan31 Жыл бұрын
I spend way too much time watching automotive KZbin, specially in the car modification niche and you by far have the best commentary to go along with your interesting builds
@greatnortherntroll68413 жыл бұрын
Very nicely done, Matt. Humorous, succinct, accurate. You nailed it! 😊👍
@howihowi2 ай бұрын
This is honestly one of the best videos I've ever watched on KZbin, ever. Amazing, high quality content. Thank you so much. Subbed. ❤
@cosmicbrambleclawv2 Жыл бұрын
"You don't hear about the failures because those people are dead" 🤣 I'm stealing that
@jeberjaberАй бұрын
What a great intro video to doing brake lines, it had it all and you weren’t um ah the whole time. Thanks
@matth70903 жыл бұрын
What a great video…I am about to make new brake lines for the first time in years, so glad I watched this! Thanks, Matt!
@yamahaxs65013 жыл бұрын
As soon as you said you were cranking rear brake down to do sick burnouts...I'm in!
@thebrowntown13373 жыл бұрын
Commenting for the algorithm, also don't think ive laughed so much at a brake line video so thanks
@h8GW2 жыл бұрын
Thanks for enlightening a few more people on the concept of survivorship bias today. I've been watching a lot off tool reviews and the amount of "they don't make like like they used to" comments has my nasuea at a pretty high level atm.
@grahamlarson27383 жыл бұрын
Excellent show mate. I watch the whole thing smiling. 👍🏽
@Lichlord11 ай бұрын
Liked this for the Teflon tape tip!
@KlngJuIian3 жыл бұрын
Dankeschön, from Germany 🇩🇪
@terencemalik64153 жыл бұрын
DIN TUV DIN TUV DIN TUV :)))
@horstwinterscheid49273 жыл бұрын
@@terencemalik6415 Wenn schon, dann bitte:TÜV!
@user-zk3oi1yq1s3 жыл бұрын
Im building a classic car with little automotive experience , but plenty of industrial mechanic, machining and fabrication experience and I love how these videos are technical but still break down the automotive stuff to ppl like me. Excellent videos and the jokes got me cracking up over here!
@rpavlik13 жыл бұрын
Very informative, and very funny. I hope I don't ever really have to do this, but now I have an idea of what's involved. Most of my Ethernet cables don't have one of those little boot thingies for the same reason why you are required to forget one nut before flaring.
@AndyTanguay10 ай бұрын
These videos are a JOY. Just bought a '53 M38A1 Jeep and have lots to do on it. Learning a ton with your videos, and laughing along the way.
@VanderGroejn3 жыл бұрын
And that's why your dad left... I'm dying here, love it. 😁👌
@stevoxyz16 ай бұрын
Thanks for your video, great information. As a mechanical fitter we used copper tube for machine lube lines and to straighten out the copper tube we would use a flat pies of wood and tap the copper tube while rotating it on a hard flat surface like a bench and this will give you straight tubing, hope this helps.
@eoghanholland24103 жыл бұрын
Some great lines in this.
@robinmatthewsechols10192 жыл бұрын
You are indeed the most humble person on KZbin, sir! I giggled out loud when you said "A-mazing" because your delivery was so chill even though you just did boss-level shit. Thanks for making these videos
@VemacRD3503 жыл бұрын
I've been using the Titan 51535 double flaring tool. It's been making perfect flares for me and you can make flares while the brake lines are on the car. The OEM Tools flaring tool can't make consistent flares compared to Titan. I'm also very surprised it only costs $40.
@therealgaragegirls2 жыл бұрын
I use this same Titan flaring tool. It's amazing--and only $45!
@TC-dw6wg2 жыл бұрын
Ooops…it went up $5.00 in 9 months…….that sucks like everything else! ✌️
@jonking7345 Жыл бұрын
Up to $50 now, of course
@jessejohnson1593 жыл бұрын
Beautifully done info video! (50 years in fleet maintenance - now retired. And my wife from Korea makes great Schnitzel too! Lived in Germany for a total of 14.5 years! 😍)
@Helloverlord3 жыл бұрын
There's automatic proportion valve for the rear, also called fifth valve in some areas, to compensate brake force in correlation to load to the rear axle. It has a physical link/lever to transfer axle/body gap to the valve thus knowing the load.
@jorgefernandez-mv8hu3 жыл бұрын
Thanks for the tips and the humor. Both are useful and necessary when working on old cars.
@delphipascal3 жыл бұрын
This channel is sooo fucking good man
@KT-ur7pi3 жыл бұрын
It's the best thing since flares, man. ☮️
@JohnSmith-pl2bk3 жыл бұрын
@@KT-ur7pi Double-bubble, man....
@daos33003 жыл бұрын
calm down. it's ok.
@NoSaysJo3 жыл бұрын
@@daos3300 no one cares
@sgtfreyday Жыл бұрын
Everything you said is true… Wanting a refresher on running brake lines. All the mistakes you mentioned? Sitting here shaking my head. Yep, I remember doing that. Doh! Well done video.
@UmmYeahOk3 жыл бұрын
I want a T-shirt that says “all hail the algorithm!”
@1one3_Racing3 жыл бұрын
I'd buy that
@DougHoyle3 жыл бұрын
@@1one3_Racing As would I.
@susanford95562 жыл бұрын
Researching KZbin pays off. This is exactly how I plan to replace the brake lines on my 94 Toyota pickup. This was also very entertaining.
@125AXer3 жыл бұрын
The flaring tool you show is great for making new lines on a build project... But pretty useless for repairs where a splice is needed to a line still on a car. There are great tools for that, and although a bit clumsy because of size, work fantastic. I use a Mastercool hydraulic tool, and am very happy with the results I get. (If I remember to put on the flare-nut)
@Frankie_Freedom Жыл бұрын
Never thought about making break lines because always thought you needed like expensive special tools to bend the pipes, same with flaring the pipes. Now watching this video makes it very very doable and not so expensive. How cool.
@ljuberzy3 жыл бұрын
it seems you've missed the part how do I tell if I need a double or bubble flare (i.e. different ports and nuts)
@markkratzer2540 Жыл бұрын
Love this guy. Nothing better than watching to-the-point videos from a smart guy with a rye sense of humor. I clicked on this video because I'm a sucker for any title with the word "easy" in it. Such as, "Easy way to make $100K per week selling dentle floss out of your garage!" What a scam that was. Subscribed.
@Virhe893 жыл бұрын
In europe fwd cars usually have brakes on X config. FR + RL and FL + RR wheels. And thank god for the Germans.
@igorschannel3 жыл бұрын
I have a 1991 Fiat in Brazil that works the same.
@JohnSmith-pl2bk3 жыл бұрын
Hey, Lada Nivas have BOTH brake circuits go to the front calipers...as I found out when one OEM front right brake hose let go at the crimp...after 19 years...but I still had brake effort from that caliper from the second circuit! Of course, being Russian, no replacement crimp fitting was available... so the brake professional reused and recrimped the original fitting.... tested it to 3000psi...good to go...
@garybogle68094 ай бұрын
This is the best break line video, Smart to the point and only the facts, so I wont be one of the dead ones! Thanks
@trickvro3 жыл бұрын
Okay, I gotta get this out of my system- You're not using imperial. You're using US customary. To be fair, there's no difference between a US inch and an imperial inch (it's internationally standardized), but there's a big difference when you're talking about volume. A US gallon is about 3.79 liters. An imperial gallon is about 4.55 liters. A US pint (≈ 473.18 mL) divides into 16 US fluid ounces (≈ 29.57 mL each). An imperial pint (≈ 568.26 mL) divides into 20 imperial fluid ounces (≈ 28.41 mL each). Okay, I feel better now. Happy #PrideMonth.
@Shoopadawhoopa3 жыл бұрын
Great video. just long enough to cover all relevant topics, dos and (more importantly) don'ts. Also level of humor is just right. TYVM :)
@TestTest-eb8jr3 жыл бұрын
All hail Al Gorithm!!
@jrichardson-m9m2 жыл бұрын
my tool man introduced me to a sur&r hydraulic flaring tool. works just as good as that Easton unit but costs 3x as much and doesn't need a vice. I love it.
@Doomsday_Report3 жыл бұрын
The word you're looking for regarding German standards is "precise" The Germans as a people are well known for their adherence to the letter of the law, if not the spirit so much, and as such they make sure the letter is so ironclad and immovable that there can be no cheekiness around specifics of this or that.
@V8interceptorChannel3 жыл бұрын
And thats also why Germans will never have: Customs, hot rods, budget race cars, tuners, grassroots motorsport or any form of automotive creativity just like in videos of SuperfastMatt.
@Shoopadawhoopa3 жыл бұрын
@@V8interceptorChannel Actually we got most of this. But to get a car street legal in germany can be quite an adventure...
@scottwallace16894 ай бұрын
Thanks for the brilliant videos. I've watched 750 of them so far. I actually have my first polite suggestion I learnt from air conditioning land. When you're de-burring the flare, I usually try to do it upside down so that any bits of metal that come off fall to the ground, rather than falling into the brake line and eventually meeting with the softest part of your caliper piston seals :) I realise this is an old video, but I only just watched it. Thanks for all your educational content and your brilliant dry sense of humour. Are you sure you're not British? :)
@VEC7ORlt3 жыл бұрын
Use compression fittings on my brakelines - laughs in Swagelok.
@Shoopadawhoopa3 жыл бұрын
I'd rather not do that... Usually the brake hose connections should be able to withstand at least ~100bar (1450psi) and a lot of vibration. Usually compression fittings are less than ideal for this application ;)
@VEC7ORlt3 жыл бұрын
@@Shoopadawhoopa Rated for 2000 to 15k psig, depending on what you choose, also built so finely that doing other fittings feels like banging rocks by comparison. But thats just joking around, for brakes I'd use brake stuff - compatible and commonly available.
@fallingzeppelin693 жыл бұрын
The exact explanation I’ve been searching for. Getting ready to run all new braking system on an old Jeep. You just cost me a lot of money. Subbed
@JOMaMa..3 жыл бұрын
Walking will save you a lot of money
@DukeOfTwist3 жыл бұрын
I'm pretty straight till I get bent out of shape PMSL #PrideMonth, not that there's anything wrong with that....
@streetbikebilly2597 Жыл бұрын
As I get older I find I like less and less people that I meet or watch on KZbin but you my friend I like. Great instructional video straight to the point videos all dialed in your like the Alton Brown of brake lines
@hillppari3 жыл бұрын
steel lines are the worst. rusts through in few years on new cars. copper all the way.
@OCtheG3 жыл бұрын
Even stainless braid 400 series? Thought those were basically foolproof
@bah53103 жыл бұрын
Hail hail to the Almighty algorithm.
@yt662283 жыл бұрын
I had the cheap flaring tool and suffered for many years with it. Then out of frustration, I purchased the one in this video. My world changed the flares were all good and the hard-line was not deformed or gouged. I learned a valuable lesson!!!
@tissuepaper99623 жыл бұрын
Buy once, cry once!
@FatNebraskaMom Жыл бұрын
Im so mad at past mechanics.
@Obama___5 ай бұрын
And the engineer who designed the car, WHAT THE FUCK WAS HE THINKING
@zdog902102 жыл бұрын
Watching this reminds me of when my dad taught me how do do lines on his 97 f150 all by hand thanks for this one!
@WelpNopeYep3 жыл бұрын
"I like spending money on tools" *buys Snapon electric stuff that is demonstrably worse than Milwaukee* Yea Id say you like overpaying for tools too
@tomcardale55962 жыл бұрын
It's quite nice to watch a video and think "thank goodness, I did it right". Also quite nice to see that someone else thinks the tool you find difficult to use is difficult to use!
@carlsapartments89313 жыл бұрын
I did the old school brake bleed system for years even working in a brake shop. Then once I was stuck without anyone to pump the pedal after repairs so i removed the bleeder on one wheel at a time when i saw the bleeder hole fill with fluid I put the bleeder back. Afterwards I checked the pedal hardness and I was surprised that it was excellent. I gently test drove and it was very good, so I drove and braked a little harder, still very good. I was going to arrange for a friend to help with a bleed the following weekend but the brakes were so good that I didn't do it. I have now done this many times even on ABS brakes and i have never been disappointed with brake performance. I would certainly do it differently if I encountered any problem. Keep in mind I only repair a single brake at a time, not disassembling and draining 2 or 4 brakes at once, and keeping the master cyl cover on and full to reduce leakage until the line is connected again. Complete one wheel then move on to the next, i don't remove the brake line until I know I am prepped and ready to connect the new part.
@asaturn Жыл бұрын
Best video on this topic. I was struggling with one of the old style flaring tools and assumed I was just a moron with no skill. Turns out it's a garbage tool! Who knew a tool designed 130 years ago wasn't so great anymore?
@dangirt50138 ай бұрын
Absolutely correct, the sequence is measure, cut, flare, recut, install fitting, reflare, and then install.
@717UT2 жыл бұрын
You're pretty awesome dude. I'm having brake issues on an old junker and had no idea what it took to build hard lines. This was incredibly educational and made me realize I am not qualified!
@brandonboulton2776 Жыл бұрын
Thank you for the video. Going to redo mine with stainless. Already have everything except the time. All the flexible I went OEM. You've helped me restore my Japanese KEI truck. 👍.
@new71owner2 жыл бұрын
All hail the algorithm! Found this channel a week ago, absolutely loving it!
@mrgruffy44993 жыл бұрын
Nice to see new and clean brake lines and fittings. BUT, I'm trying to repair the stuck and very badly rusted frame and brake lines of my '93 (YES. 1993) GMC Jimmy. I replaced the line from the ABS system to the right front brake. 72 inches long with several bends. This line was flared at both ends and came with the nuts on the line. I was pleased to learn of the newer lines that bend without collapsing. I don't have all the expensive tools as I don't plan to spend the rest of my life replacing brake lines. I do have a vacuum pump. But it kept sucking air into the pump instead of fluid. One suggestion was to put a bit of grease on the nut to prevent sucking air. But that didn't work either. Then I resorted to a clear line and jar, and pumped the brakes to force fluid into the jar without it sucking air. I must do all this by myself. I'm here on YT as I am waiting for the penetrating solvent to maybe free up the fittings. No car lift. I must jack up the Jimmy, with jack stands and concrete blocks, and then crawl around on the floor under it, with the crap falling into my face.
@Nards_199711 ай бұрын
Thanks for the information. It isn't always free in this field, lol. Editing this after watching, wow! Lot of information here to unpack I've had to rewind a few time.
@MikeSilv Жыл бұрын
This we both incredibly informative & easy to follow, while also hilarious😂
@82DieselBunny9 ай бұрын
Your commentary is absolutely top notch!!! Definitely above German standard.
@andyeverett1957 Жыл бұрын
I have a new old 95 Subaru wagon and will need to make some brake lines in the future. Like many KZbin videos you have made a difficult job seem doable, thanks for sharing your knowledge.
@Billboi8053 жыл бұрын
I’m really proud to say, I taught myself everything I know about cars. I hate that my dad doesn’t know much beyond an oil change, but He still hangs out in the garage with me when I’m fixing something :)
@rosco46592 жыл бұрын
When my Ranger was ready for new brake lines I took the step and bought all the fittings, pipe and flaring tool that I needed. Actually really enjoyed doing it, I did my best to follow the original shape of the existing lines and it looks pretty good. I even left some extra length at the front ready for when I body lift this summer.
@samuelroberts37443 жыл бұрын
I accidentally bought the flare tool you used. I could never go back to anything else. It is awesome!
@williamstubbs97374 ай бұрын
Loved the sense of humor so cleverly intertwined in your video. subbed for that reason alone, not to mention excellent content. "All hail the algorithm " 😄
@bryanjames525623 күн бұрын
Hey dude, your videos are awesome, snd its very easy for us uninitiated gear heads to understand. Taking on my first brake line change on a 2001 Chevy grandpa hand me down Tracker, and this video made it seem a little less daunting!!!
@CollinWillson2 жыл бұрын
This is a great video man. I'm redoing the brake system on my 74 Cushman Truckster, this will help alot
@colebeck84403 жыл бұрын
Seriously wasn’t expecting this. “Get in the car and drive as fast as possible.” Liked and subscribed just from that alone 😂
@applied.precision2 жыл бұрын
Glad you mentioned forgetting the nut before flaring. I can't tell you how many times I did that rebuilding my Dodge.