Supersonic RC buggy instructions + teaserpics

  Рет қаралды 18,574

Marxpek Lego Technic Design

Marxpek Lego Technic Design

Күн бұрын

Instructions for my MOC: supersonic RC buggy.
enjoy!
Interested in buying a BuWizz, the ultimate remote control for LEGO®? and help my channel in the meanwhile? Please use the following affiliate link:
buwizz.com?ref=16 Thank you!

Пікірлер: 53
@MKTechnicCreations
@MKTechnicCreations 4 жыл бұрын
can´t wait for the "teaser" one to come up :)
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 4 жыл бұрын
Me neither!
@CorerMaximus
@CorerMaximus 4 жыл бұрын
Thanks for the instructions! Interesting to see 6 suspension units + 2x buggy motors on this; I guess it's going to be a few weeks before I get more if them got this build, haha. :3 till then, I guess I'll start tearing down that offroader that I built from your previous video (the orange one)
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 4 жыл бұрын
Honored to hear you built that 😁The front uses 4 weak springs now. I suppose 2 hard ones can easily work just as well, with minimal change in the design. The rear red springs are rated as hard. But the yellow ones feel harder to me, i guess soft might work as well (the flex axles in the rear also help the spring here) let me know what you think of it when you finish it!
@flocoollego
@flocoollego 3 жыл бұрын
@@marxpeklegotechnicdesign3 the soft spring work in the back?
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 3 жыл бұрын
@@flocoollego yes it has full independent suspension. The buggy motors funtion as swingarms as well here.
@animemanXLK
@animemanXLK 3 жыл бұрын
I copied the build using a power functions rechargable battery block and an Sbrick but it couldn't achieve anywere near the speeds in the video. I actually had to gear it down using the small and medium rounded cogs so it could run well since otherwise it could only move it's self on a perfectly flat surface and even then a slightly raised or uneven surface would cause it to get stuck.
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 3 жыл бұрын
The lego battery box only delivers 7.4v, while the buwizz can deliver up to 11.1v. That is a big difference in speed, but i am somewhat surprised to hear the torque also drops, the lego lipo should be able to power 2 rc motors albeit at a lower rpm..
@propertiesoftechnic
@propertiesoftechnic 4 жыл бұрын
WOOOOW
@bowinkle2206
@bowinkle2206 3 жыл бұрын
Exactly what I said ^^
@bowinkle2206
@bowinkle2206 3 жыл бұрын
Is it possible you could make a list of the parts, I'd love to download that ") Awesome design btw 🤘
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 3 жыл бұрын
Thank you. I will see into that. I think one of my viewers tried to make a list, i will try to find it, but sadly i have little time on my hands at the moment..
@bowinkle2206
@bowinkle2206 3 жыл бұрын
@@marxpeklegotechnicdesign3 Great news! Thanks for the reply.
@tobijuss
@tobijuss 9 ай бұрын
Can you please make a bricklink wanted list or put it on rebrickable?
@boiwidnuke
@boiwidnuke 3 жыл бұрын
Cool
@tonywhite6985
@tonywhite6985 4 жыл бұрын
Hi, awesome looking thing. Does it shred gears? Is it on rebrickable please? Thanks!
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 4 жыл бұрын
There are no gears in the driveline, so no, it doesn't shred gears, but it does shred tires.. And no its not on Rebrickable, sorry.
@ELValenin
@ELValenin 4 жыл бұрын
is it possible to just use one buggy motor? I don't have two and they're really expensive. I am aware that it'll go muuch slower but I really like this build here :)
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 4 жыл бұрын
Hmm that could work but would need a completely different rear ofc. The rear would be a single axle which will give it completely different handling, I dont think it will be alot slower, but acceleration will suffer and the motor could trip its protection maybe making you wait for it to cool down. I recently built it with 2 of the chinese replica motors, they work well for this model (although you are better off sending the money for a single real one). I am glad you like it!
@ELValenin
@ELValenin 4 жыл бұрын
@@marxpeklegotechnicdesign3 Thanks for the help :) my issue is also that I don't think my SBrick will handle two buggy and one servo motor at 11-12V with a 3s lipo (It's made for 9V). Did you use the 2.0 with ludricrous mode or just fast mode with 9V?
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 4 жыл бұрын
@@ELValenin this video was shot on fast mode. Ludacrous sometimes gives issues with the tripping the buwizz protection when accelerating from a standstill so i didnt use it.
@ELValenin
@ELValenin 4 жыл бұрын
Oh OK so 9v should be just fine. Thx a lot, it was really helpful! I'll consider buying another buggy motor :)
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 4 жыл бұрын
@@ELValenin is your LiPo voltage regulated? From what i know: a fully charged 3s will burn out a s-brick (anything over 11.8v would fry it, and a fully charged 3s LiPo is 12.6v unless its regulated) besides that: i think the sbrick is using the same or similar protection compared to buwizz.
@joewake2142
@joewake2142 Жыл бұрын
Is the instructions free download instructions
@Sokolovy
@Sokolovy 2 жыл бұрын
👍
@flocoollego
@flocoollego 3 жыл бұрын
Can you make brincklink wanted list?
@veronliew6233
@veronliew6233 3 жыл бұрын
Hi can you create a supersonic lego ev3 bot with only 45544?
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 3 жыл бұрын
I do not own that set, so i cannot and i dont what you take for supersonic, but it will not be fast i am affraid.. its kind of heavy and has slow motors. Good challenge tho!
@davidrambharose1683
@davidrambharose1683 3 жыл бұрын
That's rc car is crazy fast
@stofopdenaald132
@stofopdenaald132 4 жыл бұрын
Lekker bezig! ;)
@jzonneveld9849
@jzonneveld9849 4 жыл бұрын
Wat?! Is Marxpek een Hollander?
@stofopdenaald132
@stofopdenaald132 4 жыл бұрын
@@jzonneveld9849 yep, bij me op de basisschool gezeten.
@quentbricks595
@quentbricks595 3 жыл бұрын
where did you find the rc motor ??
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 3 жыл бұрын
In rc sets from 2005, 8366 and 8475.
@flocoollego
@flocoollego 3 жыл бұрын
What is the flex axle size ? Thanks
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 3 жыл бұрын
Sorryfor the late reply. Im pretty sure they are 19L, 11L and 9L, but i also built it in red with slightly other lenghts. Just play with the connector positions
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 3 жыл бұрын
Sorry.. just checked it: it is 19L 14L and 11L as found in the 8366 set
@kennethpong7050
@kennethpong7050 4 жыл бұрын
Can someone make a list of the parts? I am new to LEGO technic, trying to eyeball the parts in the video and find them in bricklink, but it’s so difficult...:(
@flocoollego
@flocoollego 3 жыл бұрын
I make brincklink wanted list if you whould
@panPippi
@panPippi 2 жыл бұрын
@@flocoollego could i also ask for the bricklink part list? thx
@heavell9576
@heavell9576 Жыл бұрын
@@flocoollego Hello! Can you provide a link please?
@flocoollego
@flocoollego 3 жыл бұрын
How I can make Benty connections whit normal suspension?
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 3 жыл бұрын
Sorry i dont fully understand. But the front double suspension can easily be done with a single hard suspension, if that is what you ment, Remove the rear ones.
@flocoollego
@flocoollego 3 жыл бұрын
@@marxpeklegotechnicdesign3 no in the back :)
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 3 жыл бұрын
@@flocoollego you mean the flex cables? They do hardly anything for the suspension. The big red spring does the work. Id like to help but i dont fully understand your problem
@flocoollego
@flocoollego 3 жыл бұрын
@@marxpeklegotechnicdesign3 no when i can change the suspension in the back by normal design ? (New suspension )
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 3 жыл бұрын
@@flocoollego so you want to use the smaller 6.5L spring in stead of the large spring in the rear? Maybe off the winglets/spoiler? Better use the larger ones tho..they are pretty common in bike sets
@khoaandkhangcake6063
@khoaandkhangcake6063 2 жыл бұрын
super fast
@TheWisdom3
@TheWisdom3 Жыл бұрын
Buurman! lol
@marxpeklegotechnicdesign3
@marxpeklegotechnicdesign3 Жыл бұрын
Onder de peeeeeeperbus! Daar is het aaaaltijd knus! 😅
LEGO Technic RC 4x4 mini Buggy with BuWizz and RC Buggy motor!
8:15
Adrià Blancafort
Рет қаралды 626 М.
Это было очень близко...
00:10
Аришнев
Рет қаралды 6 МЛН
😜 #aminkavitaminka #aminokka #аминкавитаминка
00:14
Аминка Витаминка
Рет қаралды 2,2 МЛН
MY HEIGHT vs MrBEAST CREW 🙈📏
00:22
Celine Dept
Рет қаралды 91 МЛН
Lego Technic Ripsaw EV1, 8 Buggy Motors Powered by BuWizz.
3:41
Marxpek Lego Technic Design
Рет қаралды 100 М.
4 different LEGO Technic suspension types
4:15
TechnicTiger - LEGO Creations
Рет қаралды 137 М.
My Fastest LEGO Technic RC Car!!! feat. BuWizz & RC Technic Buggy Motor
10:38
4x4 Buggy steering (instructions)
7:08
Buildable Ideas
Рет қаралды 34 М.
Supersonic RC Buggy, A Lego Technic 8366 And 8475 Tribute MOC, powered by BuWizz
3:22
Marxpek Lego Technic Design
Рет қаралды 15 М.
Building the FASTEST LEGO Car
13:07
ProjectAir
Рет қаралды 2,1 МЛН
Это было очень близко...
00:10
Аришнев
Рет қаралды 6 МЛН