Cheapest Ls Turbo Swap Kit. Finally Did It

[@justinp2993]

Definitely a different level in this video, information, professionalism, camera work, editing. Been enjoying your channel for a while but really enjoying the extra effort put forth.

[@Boostedlifestyle]

Thanks man! It means a lot when I can get a response like this! Makes me wanna do more better!

[@ENOCK360]

Watching in Maryland here. Just want to say it's been nice watching the evolution of this project. Great work at applying yourself to learn and improve your TIG welding and fabricating skills. Keep up the great work.

[@Boostedlifestyle]

So close to World Cup finals!

[@andymcdo]

I've been feeling the same way as you kyle. Learned to weld in college but haven't done it since (over 10 years) and i recently built my own crossover pipe and exhaust for my own turbo LS build. It started out pretty shit but got so much better as i kept building. It's running now and I couldn't be happier.

[@douglaslila9825]

Keep kicking ass. You are progressing and have stepped it up a couple of notches in this video.

[@Boostedlifestyle]

Thanks brother!

[@creamfilledpickle6607]

I'm pretty sure everyone here can appreciate how hard you work not just on your cars but working long hours at your "day job" and coming home and doing what you love and still have time to share it with us

[@Boostedlifestyle]

You got that right! Trying to juggle everything I do and produce decent video not just blogging and talking takes a lot of effort

[@rixtrix11]

If you use Star flux on the inside of each joint you don't have to backpurge. A little pricey, but so is argon and the time required for setting up a back purge. Looking good! I really like you using a dial indicator stand as a handrest when tigging. That's an awesome tip!

[@crowsgarage6669]

this channel is blowing up! big fan of doing everything yourself so we can learn as well. KEEP IT UP!!!

[@Boostedlifestyle]

I hope it blows up 😍

[@crowsgarage6669]

@@Boostedlifestyle keep putting out material like this and i don't see how it wouldn't

[@CyborgbobaFett]

Cant wait to see it going again! Definitely getting better at the welding game! For TIG, no gap is pretty nice because the heat control is better. But MIG likes to pull gaps tighter, and if it is already touching then it likes to bend in or sometimes even bend outward. Which is a real pain to fix haha.

[@stephendunzelman9317]

Try preheating the whole piece in the oven for a can hour or 2. Leave the oven on while you weld and put the part back in the oven after welding. Then turn the oven off and leave the part in it for a more controlled, longer cool down period.

[@joep1253]

For real, your welding is legit. This video is the perfect example of why I started watching your channel. Throw in a couple of fuckbois, a Kent clip, some more clips of Virginia and it’s perfect. Seriously keep up the good work

[@Boostedlifestyle]

Hahaha I keep forgetting about my ruby video clips 😜

[@slammersbaseballorg]

In the future, when you are done welding on turbo housing, diff housing, cast manifold, etc, have your oven pre-heated. I usually start at 400 but that's just my guess, someone here prob knows the temp to start at better but anyways, back the oven down 25 degrees every half hour till get to 150, let part sit at 150 for an hour then turn off the oven and just let sit in the oven overnight. The next morning "most times" it's not cracked.

[@Boostedlifestyle]

That’s a longgg as time to heat holy?

[@slammersbaseballorg]

@@Boostedlifestyle LOL. It has something to do with the fact the parts are cast. Yes it is overkill but it works

[@cobnutts]

Get a medium backcap then cut all tungsten in half and sharpen both sides like you did then you have double the pieces to work with😉 chassis fabricator by profession

[@mwiseman060606]

cobnutts I cut mine in Thirds

[@Boostedlifestyle]

I actually use the medium one half way though the video to get a tight space

[@steverooker1313]

Looks good! You’re welding and fabwork have come a long way!

[@Boostedlifestyle]

Thanks sir !!

[@LowBoostFilms]

Because of you I’ve started my own build and put it on KZbin. Great content, can’t wait to see this rip!

[@Pawg_Clapper]

getting noticeably better at editing these vids sir.

[@Boostedlifestyle]

Thank you thank you!

[@johncarter1552]

Use map gas or a cutting torch with a rose bud tip or even in the oven to heat the turbo before you weld

[@TheChazwick123]

Looks good dude.

[@callofgeorge]

congrats man.. those tig skills have improved tremendously. like night and day.

[@stevearonie7825]

You should heat the whole housing, when you finish put it in some kitty litter or oil dry to let it cool slowly.

[@LynnTwinCustoms513]

Turdo log mani looking mint 👌🏻

[@motolovin1969]

good job man... same way i learned to weld... turboing an ls

[@cvaracing7070]

Awesome bro lookin better each video an welds defiantly getting better. MD & WV here.

[@brandonpanozzo86]

Mobile alabama here lookin good kyle she is coming along great keep going and she will be rippin in no time love the content

[@Boostedlifestyle]

Thanks bro!!

[@jasonolson3322]

You are progressing well grasshopper!! Good job man, appreciate your content and effort! 👊

[@chris2170]

Good Job Kylee 👍 , keep it!

[@jorgyr36]

Nice and tight... Is the only way we like it! Oregon

[@BJ-Hunter513]

Thanks for the advice. keep making good videos

[@Boostedlifestyle]

Where is everybody from! Let’s see how world wide we get!

[@safwandestiny6562]

When you complete the ls engine. Your chanel start dying..

[@Boostedlifestyle]

What why ?? Why can’t we build another one 🤔

[@safwandestiny6562]

@@Boostedlifestyle im watching ur vids since part1 with ls engine until now. Im from iraq iwant do turbo ls ihave chevy malibu 1981. If u did another engine u will see people will back to the channel. 🤗💞

[@jacobnorris2017]

Mississippi

[@SidekickZero]

West Palm Beach FL. This is my 95 dime in the picture I'm planning on building for burunout comp style. Tt LS.

[@joshuawillis5679]

Looks great

[@WelcomeToTheMadness]

So now that you can do a turbo kit. Given the cost of making it and purchasing it, what’s the cost difference? Oh yeah, great welds while still having over 9000+ hours left of 10,000.

[@Boostedlifestyle]

It costed me in materials and welding supplies like 400-500 for everything maybe? Downpipe, v bands and all the piping

[@aaronsnell3112]

PROGRESSION!!!! Great video Kyle, keep on keepin on!

[@SidekickZero]

Make sure you got plenty batteries lol. I'm old school, I like the helmets without batteries. Just flip the lid or hood down. The car is coming along well. Been subscribed since the beginning. Lol it's funny to see your exhaust welding job from the beginning and now.

[@Boostedlifestyle]

It’s a disaster put together 😂

[@SidekickZero]

Ain't stupid if it works 😂

[@simonr33gtst96]

Looking good, I'm from the UK

[@Mototardpaul]

Love ya bud, great work !

[@brianbrandenburg2561]

GOO JOB BRO!!!!! SERIOUSLY!!!

[@allmotorsubaru1647]

Thanks for the motivation!

[@Boostedlifestyle]

Just doing what I can!

[@TheMick26]

Hey Kyl3. I drive all the way from Kings Mountain, North Carolina for every episode... well worth it, man.👍 Shoutout to Amazon for getting it right this time (twice in one episode. Whut duhfuk?). Even more than that, big Shoutout to you for putting out more than that one girl in high school.👏👏👏 Proud of you, brother. Oh yeah, just so ya know, I looked up your nose and you're good to go.👃🙄 See ya next time. Get dat V!✌

[@Boostedlifestyle]

Hahaha I love the kyl3 !

[@SuperSport01]

When I weld cast shit, I preheat and postheat with my gas grille, and slowly change the heat. I'm not a real welder but I figured it might help somebody.

[@havablast70]

You came a long way great job! Long Island New York!

[@tomisuikkari992]

how to roast imperial unit lovers: What comes after half inch (13mm)? yes 14mm, after it 15mm and after that 16mm. If you can remember those imperial sizes by memory you're a legend already

[@myfavoritemartian1]

Arizona, east of Phoenix in Queen Creek, (NO there is not any creek, not my fault....)

[@Hamlet_DaPig]

I enjoy the fact that people hate on the channel but watch the full video haha.

[@VanLifeKen]

yes pay the man!

[@jasonlooker5716]

Yahhh Buddy !

[@chris2170]

West Coast! Salem, Oregon.

[@JustACarGuyNamedTom]

I will never forgive you for selling the Supra! The only thing that will make it better is 2JZ swapping one of the Mustangs

[@VanLifeKen]

2jz the world

[@madmod]

Barra bitches

[@JusttheEdge]

@@madmod if the barra was available outside the world down under. 2jz is worldwide.

[@Boostedlifestyle]

I have a spare 2jz block 🤷🏻‍♂️ let’s grow the channel so I can fund to put it in something :)

[@36boosted30]

Amazing. What is your interocoler set up?

[@Boostedlifestyle]

It’s an eBay 4 inch core

[@doug1030]

Excellent work Kyle ! I have welder friends who never get it . Keep it up . That's what she said . Ha Ha

[@mazeworkz3761]

🔥TEXAS🔥

[@codylim6435]

Are you putting rechargeable batteries or normal batteries in the welding helmet?

[@Boostedlifestyle]

It was just normal ones ! But I got a new helmet 💪🏻

[@terrypickette118]

Pahrump NV In between Las Vegas and Death Valley

[@ChrisSullivan69]

What grinder is that I want one

[@Jcarney87]

NY. BUFFALO

[@VanLifeKen]

well i got an add for a movie about the delorean and then u said back to the future.... JAJAJA

[@Boostedlifestyle]

What the actual fuck 😂

[@stevow1987]

It's a budget build with budget workmanship.

[@willnicoletti]

Hey SCHMUCK!!!! looks great!! keep up the good work :)

[@michaelclarke2497]

This is the most pg video Kyle has ever made

[@Boostedlifestyle]

I done fucked up 😂

[@tedtheodorelogan5993]

Bolt the vice down for the love of V

[@kobraballer]

I'll give you some mild rod! Haha me and my gf love watching your videos cuz she says you act just like me lol. Coming at you from nebraska here.

[@Boostedlifestyle]

Hahaha twinning!!

[@jeffgraham48]

Damn Kyle your almost a novice welder. Almost. Lmao! Welds are looking great! Good progress video ✌

[@erniesaldivar5535]

AWESOME

[@Joe-gs9ox]

hey bud, i stumbled across this build like a week ago, and have literally binged every episode in the past few days. I subscribed after like the 4th time you asked me. lol You and your buds are fucking hysterical. Kents a dickhead and i fuckin love it. I really dont understand how you dont have way more subs and views cause its great content for the regular guys out here trying to do cool shit. Keep it up, and it will come. Peace easy. Get that V.

[@ThePryapizmC]

Florida!....your fab skills have come a long way...you should be proud!....another awesome vidya...look at that golden fuckboi up there..just look at it!

[@Boostedlifestyle]

Look at it will you!

[@Sloppyjalopy123]

Nicely done sir... I use to buy heat by the case, until they accused me of making meth lol. I told them, only my car uses meth.

[@AmericanMade00]

I would get out in the garage and work but I just got my wisdom teeth taken out🤘

[@Boostedlifestyle]

No excuses!

[@R1j0hn]

Keep it up Kyle, you'll get better at MiG someday ! Checking in from Calgary, but born & raised in Nova Scotia ! -----------------------------------------------> Where's that fuckboy Tokyo ? Tell him I wanna race that POS Chrysler fluorescent tube !

[@Boostedlifestyle]

He’s probably eating ass somewhere

[@heavycheavy01]

Mardela springs Maryland Trying to better my channel what's a good budget camera and apps/software.

[@OxygenGenetics]

Cannon g7x mark 3 and I like power director for editing personally. Lots of people just download Sony Vegas via torrent to avoid buying it, same with numerous other programs.

[@heavycheavy01]

@@OxygenGenetics awesome thank you

[@sonicperformance]

You clearly have ADHD 🤫, but don’t change a thing, your Chanel is awesome. I’m currently working on my MK3 7M-GTE. You did the right thing selling the Supra, as sad as it was. Get a producer, camera man and quit your job, this is TV I love to watch.👍

[@Boostedlifestyle]

If only the opportunity was there 😂

[@SkullanGuns]

Ask v to make new no supra shirts

[@Boostedlifestyle]

I didn’t get any interest in the last ones but maybe if you Guys have some ideas I’ll get her to make something up :)

[@SupraMane69]

I dont forgive you!

[@Boostedlifestyle]

Plewseeeee

[@StraightLineCycles]

if you want to send me just your footage you want sped up faster i can do it and shoot it back to ya

[@Boostedlifestyle]

That would take even longer to do, I can totally do it myself 😂

[@Tittos_E_36]

I'm I the first one..? ❤️ Ayee hello buddy

[@Boostedlifestyle]

Yes you are first !

[@Tittos_E_36]

@@Boostedlifestyle came for the Supra build since day 1 ❤️ the vibes you bring while you working on everything keep me here

[@wetsaltypickle]

A freind of mine buys his break clean by the 5 gallon bucket. Lol

[@Boostedlifestyle]

He’s a savage on a new level