Sur Ron basic suspension setup

Рет қаралды 27,198

Adobo Moto

Күн бұрын

Пікірлер: 61

@alanbomb 2 жыл бұрын

Thx my Filipino bro! The best quick and easiest explanation out there. 💯

@gonadiator 11 ай бұрын

I’ve always been intimidated to tune my own suspension. Thanks to this video, i finally did it for the first time. And it only took 10 min! Thanks!

@benji431976 3 ай бұрын

He’s not telling you right buddy

@jedok1677 2 жыл бұрын

Kamusta! I'm close to buying my Sur Ron. I plan on sticking to stock for a few months, in terms of suspension, battery and controller. Just so I can really get to know the bike which will ultimately make each upgrade more rewarding. These are one of those important things i need to know. I wan't to mess with these types of settings and really fine tune it in the best way the stock parts can get me. Keep it up man! These are some great info. I appreciate it. I love what you've done to your Sur Ron. Looking forward to more vids and I wish you and your family more success!

@BLVKCS 2 жыл бұрын

Been looking for great content like this for a long time short and informative

@davidsoto8307 2 жыл бұрын

Thanks for the good video, you are right, alot of people dont even realize they can pump the front forks, thanks man @adobo Moto

@Hampden01 Жыл бұрын

Kudos! All KZbin videos should be like this. Dense content. What I needed to know. Avoid temptation to add 2 minute intro with b-roll flyovers. Liked and subscrided (I don't need to hear it again.)

@cubosmetalband Жыл бұрын

Fast and easy, the only video that help me. Thank you!

@ShenryRNBSN Жыл бұрын

Now this video is gonna go down in the surron books.

@MSTechie Жыл бұрын

Yoo, I’m ashamed to have gone over 2k miles without working on my suspension. Definitely gonna be fixing it to my liking before next ride 🙏

@myerballpythons Жыл бұрын

Awesome video, I have never used forks like this so it was helpful seeing you adjust the air pressure. The suspension guide that came with my bike did say 80-100psi though. Not sure if they changed the forks on some bikes?

@AutoBodyEverything 9 ай бұрын

What year is your surron?

@user-bh5st3ch8j 3 күн бұрын

Mine says the same in my manual 80-100psi, I have the 2024 model just wondering if this is correct

@kolopier Жыл бұрын

My surron have kke bf-355rc fork, and manual recomends 80-100 psi!

@AutoBodyEverything 9 ай бұрын

What year bike?

@kolopier 9 ай бұрын

@@AutoBodyEverything 2023 40ah

@bennyvazquez3547 13 күн бұрын

Bro great video!! What shock pump would you recommend for a new ultra bee owner.

@Jagi603 8 ай бұрын

i always fill up my front fork and after a couple of rides the psi drops down again?

@jamesstarck7554 6 ай бұрын

Great video and easy to understand, but can i apply this to a Talaria?

@jaywan_ii-6540 Жыл бұрын

I lost the knob on the bottom of my forks if there anywhere to get a replacement

@adobomoto Жыл бұрын

Maybe normal innertube caps

@jaywan_ii-6540 Жыл бұрын

@@adobomoto ok hopefully that works ima try Amazon

@Johnnybravo.. Жыл бұрын

Thanks for the video🤙 Deserves more likes

@BackwoodBassHunter 9 ай бұрын

My Manual says that the fork PSI shouldn’t exceed 100psi. Are they wrong or are you wrong? Thanks

@josephmunoz640 6 ай бұрын

Different surron year different shock is my guess always trust the Manual

@flys2k 9 ай бұрын

Great video! Does the rear shock need to be aired up? What psi?

@MRGOLD99.999 Жыл бұрын

What fork do you have Not off a Gsxr I hope But no really which fork do you have on that looks good

@stagrye228 2 жыл бұрын

This is very important for me. Thank you for making this possible.

@belabartha3071 Жыл бұрын

How can you turn the screw (preload adjuster) from the rear end when it is under tension?

@AutoBodyEverything 9 ай бұрын

I think it’s got to be no tension as the front forks too

@parkwayman7373 Жыл бұрын

I just went to add air into my forks and it doesn’t seem to be holding air. Do you know where it could be leaking?

@AutoBodyEverything 9 ай бұрын

It’s tricky removing the pump socket from the stem if using a standard pump. I’m having to use the compressor bcs it’s faster and holds pressure even while I’m removing the chuck

@manasseh7 9 ай бұрын

@@AutoBodyEverythingyup this happened to me today. Shock pump let all the air out. Used a tire pump and that did the trick

@AutoBodyEverything 9 ай бұрын

@@manasseh7 … awesome, I recently got my Surron X by trading my turbo Nissan from this channel. How many psi did you bring it to? I hear 100-150 psi is factory recommendations but like one or two ppl said 80-100. So I only brought mine to about 100 psi bcs of that comment and that terrifying sticker on my shocks that says “DON’T KILL YOUR SELF” 😂😂 so that’s why I’m asking.

@spexts2610 Жыл бұрын

Do you need to put air into both forks

@ultimatesoccershow 2 жыл бұрын

Mega video, I learned some really good stuff Adobo Moto, Cheers!!!!!

@Iveyfv 6 ай бұрын

Hello, do you know why when I try to put air in dnm forks there is little bit of oil that comes out is that normal?

@ColdStoneRacing 3 ай бұрын

Yeah. Don't do that. That's an oil filled shock not air.

@fellfrosch3 7 ай бұрын

My manual tells me to use 80-100psi.It's the manual from the 2024 light bee. Fork KKE model (BF-35SRC). For my 210lbs including gear and backpack I am at about 25% sag with 100PSI. :/

@CmdrTigerKing Жыл бұрын

what about the forks that dont arent air ?

@AutoBodyEverything 9 ай бұрын

It’s an adjustment with a flat head. I seen in video

@AutoBodyEverything 9 ай бұрын

Must be different years

@south3767 2 ай бұрын

how do i take air out?

@ned.15 Жыл бұрын

the cap doesn’t undo ?

@PauliusKiltinavicius Жыл бұрын

ty so much for this info

@supergangsta1998 7 ай бұрын

Best video

@benji431976 3 ай бұрын

😂😂😂😂😂😂😂😂😂😂😂😂😂😂 The top adjuster on the rear shock is for compression. The one at the bottom of the shock underneath is for rebound maybe research and have a look before making a video like this. A If ya know what I mean Burt😉🤙