Segway x260 you can do this via the app -- however even off they were causing throttle issues for me when the cable got stretched. So followed this and removed exactly the same way and i'm good to go! Thanks for the video!
@MrMurphy483 жыл бұрын
My app doesn’t seems to disable to sensor on my X260, were you experiencing the same thing?
@DallinDyer3 жыл бұрын
@@MrMurphy48 toggled on my bike wouldn't even move. Off it was jerky
@ItisMeMike2 жыл бұрын
So if I wanted to remove the light .. just unplug the light wire and remove as well ? .. just got my surron... watching videos before I assemble it.. no rush cuz I'm riding a different ebike at the moment
@djdubz Жыл бұрын
Great video. What do you use to waterproof/fill the brake sensor connector after removing it? Puddy? Or just electric tape? Another connector?
@MuddyDrivewayProductions Жыл бұрын
I loaded it up with Dielectric grease put electrical tape and it's still good. Probably can just wrap with tape and use heat shrink tubing. Thanks for watching and commenting.
@djdubz Жыл бұрын
@@MuddyDrivewayProductions Thank you for the tips! Your video is still helping people 3 years later!
@marcussmith4913 Жыл бұрын
can you tell me what brand of branch hand protectors on your bike?
@marcussmith4913 Жыл бұрын
My friend just smashed this front brake to mush and ripped the wire you are removing out. The throttle will not work now. someone told me the brake sensor wire if ripped out will not complete a circuiut thus making the throttle not work? I dont know if this is right or not? I hope if I remove this wire the throttle will work. My poor friend broke his calour bone on my garage door.
@MuddyDrivewayProductions Жыл бұрын
Hi Marcus, I couldn't find the link to that exact one again but this one is similar. amzn.to/3MUlOuj just make sure it fits your handle bars. These are light duty. Up to you what you would like. Some protection is better than none. This is the link to the Heavy Duty Hand Guards that are currently on my bike amzn.to/3qy5d8j they stick out a bit I like it but others may not. As an Amazon Associate I earn from qualifying purchases. I hope your friend gets well so he can ride again. Aloha and take care
@moorelife72223 жыл бұрын
I have the 2020 X and the dongle sequence would not work for me. I then pulled both brake sensors as you did but still cannot do a burnout, the motor doesn't cut off completely when holding the brake and throttle but there seems like something is still restricting the tire from spinning, any suggestions? Oh and my right side sensor wire was a tough son of a gun trying to get it out and ended up stripping and snapping in half, seemed like it was welded inside or something, now dont have the screw bolt to stick back in..will have to plug it with something. Hopefully my Sur Ron still loves me. Lol. Thanks and take care
@rickyonwheels482 жыл бұрын
Sounds like your putting your weight on the bike when your trying to burnout. You have to just stand above it and hold the front brake and twist the throttle and it'll spin. it doesn't have enough power to spin with your weight on it.
@leapoldstotch49872 жыл бұрын
Can you set the engine braking with the connector if you have cut the green wire?
@MuddyDrivewayProductions2 жыл бұрын
Sorry I'm not sure. Here is a video on Programming the Sur Ron controller kzbin.info/www/bejne/eqfaYopvjKuXiJI
@dbirds214 жыл бұрын
heyt bud. What did you use to plug the hole in the brake lever screw. So you screw it back in but theres still a hole where the wire use to be.
@MuddyDrivewayProductions4 жыл бұрын
Hi Derek, if I recall I put some dielectric grease in the hole. You can also use silicone and knock it out if you ever need to use it again. Thanks for watching and commenting.
@Mr2010ezekiel3 жыл бұрын
Aloha what island u from?
@exaltedstinger14313 жыл бұрын
My Sur Ron will sometimes jolt forward when I come to a stop, when my hand isn't even on the throttle. Any advice?
@MuddyDrivewayProductions3 жыл бұрын
That's very weird. Sounds like you have an electronic throttle. I changed mines to cable for better feed back.
@LarryRichelli4 жыл бұрын
Some say that you can still use these sensors to activate a brake light.. Would to bind a video showing how to do that.
@MuddyDrivewayProductions4 жыл бұрын
I have never tried that. I would also like to see that video. If I ever figure it out I will make a video. Thanks for watching and commenting.
@owendoescomputers91914 жыл бұрын
I disconnected them and for some reason the bike won’t work now, the light and display work although the motor won’t spin
@MuddyDrivewayProductions4 жыл бұрын
That is very odd. Did you try to plug them back in to see if the bike will work? Did you cycle the key from off to on?
@owendoescomputers91914 жыл бұрын
@@MuddyDrivewayProductions Its very weird cause i tried to put them back in and the bike still did not want to work but i leave the bike for abt 20 min and come back and all of the sudden it works!!!! I have no clue what happened, im just glad i got it working again. Thx for the help man! :)
@MuddyDrivewayProductions4 жыл бұрын
@@owendoescomputers9191 sorry you are having problems.
@stevenutter36144 жыл бұрын
@@owendoescomputers9191 The controller thought the comptuer brakes were engaged.
@stevenutter36144 жыл бұрын
You're not supposed to do it like that. You remove them from the wiringing inside the bike, brake sensors getting accidently pulled out is the biggest cause of people bikes not working when they are delivered. Also if you have the X controler you don't need to remove anything you just need to use the harness that came with everything, {That's the battery pack wire with the LED on it} and .....oh look it up yourself.
@paulcherry4742 жыл бұрын
just get a bolt same size . good video
@brandonkekahuna313 жыл бұрын
Hey how did you get the bike license? Im trying to get mine registered . Any kind of info would be great full. 🤙
@MuddyDrivewayProductions3 жыл бұрын
Sorry Brandon, this was one of the first ones to get the license. When the E bikes got popular they stopped giving them out and said that 750Watts and up is too powerful. This is what they told me when I tried to register the bike in my name. The C and C is asking for the sticker back. I purchased a bunch of stuff like the Super Moto tires Ect.. to start riding this to work but it's not going to happen. Need to get the ones with pedals like the Super 73 I think. Sorry to disappoint.
@brandonkekahuna313 жыл бұрын
@@MuddyDrivewayProductions ah man I figured I’ve been trying to look for some kind of loop hole. On Luna cycle the sell the plates that’s if the wires a clipped it’s under the class 2 bike licensing .I’ve been trying to find a super moto set as well everywhere is sold out , even this company from Australia . I’ll keep hunting. Thanks again brotha
@budwhite97814 жыл бұрын
Thanks for this one too. I was wondering what is the brand name of your hand guards? Cheers👍
@MuddyDrivewayProductions4 жыл бұрын
It's a universal one. Got it on amazon. I made an installation video. Amazon link- amzn.to/2VMumtx Thanks for taking the time to watch and comment.
@budwhite97814 жыл бұрын
@@MuddyDrivewayProductions thank you
@Nahoogg4 жыл бұрын
There is also a company based in the us which makes very nice parts for the sur-ron and the segway x260 americansurron.com/products/sur-ron-light-bee-hand-gaurds or you can get them in canada to on this website ebikezilla.com/en/ Cheers
@dbirds214 жыл бұрын
Thats cool. I think I will just disconnect the plugs and leave the wiring as is. My first order is more power. I just got this thing last night and the power is okay at best. Decent top speed at 49mph but the take off speed is no bueno. BArely is strong enough to lift the tire off the ground.
@MuddyDrivewayProductions4 жыл бұрын
I run a 60 tooth sprocket for the trails. Good low end but lost some high end.
@scootermenace62332 жыл бұрын
Thx this works on escooters as well
@SirClaymore944 жыл бұрын
My cables are completely insulated...still figuring out what to do. I'm probably going to try to cut the insulation carefully to get to the cables. Anyone else with the same problem?
@mr.dumbdumb67044 жыл бұрын
Just un plug the plug. I did that I I have no problems
@meter42824 жыл бұрын
Don’t take 2020 sur Ron x apart , this is programmable with Dongle🙏
@First.Last.993 жыл бұрын
but, it doesn't look nice at all
@Gabekelley2 жыл бұрын
How does one do that?
@rickyonwheels482 жыл бұрын
No don't be scared. Just take it off and get the wires out of the way at the same time. Mechanical fixes are always better then programable type fixes on any machine.
@carlvonderdecken97324 жыл бұрын
Just program it, using the break lever takes 10 seconds
@MuddyDrivewayProductions4 жыл бұрын
The bike didn't come with a Dongle to program it and at the time of filming I had no idea it was even possible. Wish I new ahead of time. The bike looks cleaner with less wires though. Thanks for watching and commenting.
@RZ8888883 жыл бұрын
Chvalabohu na nových modeloch nemusím káble vyťahovať 2021 tam sa to da diagnostikov deaktivovať. Bez nejaké demontáže ničoho sa netreba ani dotknúť
@meter42824 жыл бұрын
You can turn off the sensors with the programming dongle? Watch the Luna programming video prior to taking your bike apart! Sur Ron changes every shipment, this link is more current for programming regeneration AND in description turning off e brake cut off - kzbin.info/www/bejne/eqfaYopvjKuXiJI
@RZ8888883 жыл бұрын
Netreba od jebať ten Vrchní plast dá sa to pekne vyklopiť celý Štartovací systém úplne v pohode ale niekto to nevie hahaha tuning nemám rád malé deti to robia zničia buď auto alebo motorku alebo bicykel tragédia.Aj ty máš na tom otrasný vpredu hneď by som to dal dole to neni Enduro je to elektrický bicykel na to netreba zabúdať hahaha