Sure Cuts A Lot Pro 3 How to curve your words

[@kattinabrockman8299]

I'm so thankful that people like you take the time to make tutorials like this. I was lost before watching your video. Now I've made my first logo.

[@PikesPeakGraphicsDecals]

Thanks 😀

[@diydadworkshop6123]

Great video! I learned a number of useful techniques that will help combat issues that I’ve had since I’ve gotten my plotter

[@pincgator818]

This video made life so much better!! Thanks for the information and demonstration.

[@jasonrobertson7373]

I’m new to vinyl cutting and design . I love the way you explain things. Do you know if sure cuts a lot software has a color separation option? If so can you do a tutorial on that. If not which software would you suggest suggest? Thank you

[@donnaearly4255]

Thank you so much for teaching us this program. How do I get more stock pictures that will work with sure cutts a lot

[@cyndiparker9496]

thanks for your video--exactly what I was needing---I have SCAL4 (not the pro version) When following you instructions to create a round logo--I am unable to get it to reverse paths. Is it because I don't have the PRO version?

[@diananaber1316]

+Cyndi Parker I am glad someone else has the same issue I was having. I dont have pro either I am wording if that is why also.

[@kattinabrockman8299]

+Diana Naber did you make two different circles? I had that issue too using pro. Then I went and copied my original circle and pasted it then did the steps and it worked.

[@chosenremnant957]

Today is 11/4/2018 and it will not reverse. Sure cuts 4 .smh in so frustrated just trying to put the word on the bottom going from left to right. Did anyone else get it yet?

[@delmond7630]

Thanks for the video lesson. You wouldn't happen to know how this translates in SCAL5? Specifically "path start offset" - I don't see that as a choice in version 5 either here where you are at on the right or under Path menu option.

[@Mr1979Mogul]

Great tutorial, thanks for the step by step with explanations!

[@danubianavarrete2552]

Thank you very much for the video and very well explained. you have some video of how to make the registration marks with this plotter to cut

[@joeradle8700]

How do you delete multiple nodes at once in SCAL3. Thanks

[@rikkapaquette4719]

I like your new intro!

[@imaginationsunltd1328]

I'm really bummed, I am using sure cuts pro 3 but I don't have the text/type on path tool. What the heck? what can I do instead?

[@toniabernethy3184]

I am very graphically oriented and your logo video was easy to understand. However, I also like to weld my words so that I don't have to spend time pasting individual letters in my scrapbook layouts. A lot of the videos I have watched for creating words on a path never show how the design will cut with the Cricut. It seems to me that when the logo is cut all the items will cut as shown but when the item is removed from the mat all the items will be individual items and then the logo would need to be recreated when pasted on the paper. It would be helpful if the logo video could show how the design will cut without being welded. Your video was a good one except for my comments in this message.

[@sandiehaskell4831]

I did everything like shown to add the words on the top of the circle. Then in my second circle, I chose Reverse.... why is it only letting me type one letter then nothing. I have started over a dozen times and it keeps doing it...

[@momster5128]

Best tutorial yet!

[@darbiphilibert3454]

I have Sure Cuts a Lot Pro 3 (says in the title bar) but text option doesn't look like yours or give me the option to type on path tool. you're tutorial is amazingly helpful...if I could only make it happen. Any thoughts?

[@PikesPeakGraphicsDecals]

+Darbi Philibert only thing I can think of is you have sure cuts a lot 3 not the pro version

[@sandiehaskell4831]

Darbi, did you hold down the text button so the choices show up?

[@darbiphilibert9687]

Sandie Haskell just tried that and it worked! I'll try to remember for next project! Thanks so much!

[@Loverboy71185]

Great Video...Keep Up The Good Work!

[@matthobbs7260]

How do I turn my group on cuz it’s not allowing me to access it

[@cachanilladesign5079]

THANKS MAN THAT HELPS ME ALOT....

[@leonaklug494]

Thanks you for this tutorial, very helpful!

[@PikesPeakGraphicsDecals]

Many more to come please watch :)

[@Imustfly]

This is an awesome tutorial !!

[@betooax]

if i have a image printed on paper material or label material can the titan 3 cut the image outline like a sticker?

[@PikesPeakGraphicsDecals]

+Robert Santiago Yes it can, Do not ask me how...I never use that feature lol

[@RWCLOCO]

good video thanks for the info...

[@sorstudios]

I love this program

[@taylor52baby]

Thank you so much!!! 🙏🏼👏🏼😊

[@legeneralkueck]

Please help help.I am desperately looking for the Sure Cuts A Lot 3 Pro software.Can anyone please provide me with one please

[@MRMT-kp4yt]

I need a decal made but I can faind your Facebook to send it to you

[@janenegeorgeff3214]

How to edit a project on sure cuts a lot 2

[@gloriacedillo1273]

podrias haserlo en espanol can you do it in spanish

[@galaxy29610]

Thank you sir so much

[@paulkaremera6460]

Thank you

[@ufc951]

Thank you!

[@PikesPeakGraphicsDecals]

thanks!

[@vernillthompson2420]

Please help me

[@vernillthompson2420]

Please help as soon as possible

[@truthtimetv4575]

the hell are you talking about lol

[@Danieltrotti]

too bad man! better luck next time!

[@calvinhenshaw2147]

you talk too much

[@dianeripley4851]

Thank you

[@MrChipmiller]

Thank you