Surface mounted shower brackets for bar shower thermostatic valve installation

Subscribe to a great channel showing all your needs in domestic properties from kitchens to bathrooms bedrooms plastering electrics the full shebang. Which ever job you need to do with the property there most probably will be a video showing how I do live jobs on site day in day out week in week out. Beautiful job all the time.
And always step-by-step installation
mjckitchensandbathrooms
Hello. And welcome to MJC kitchens and bathrooms. A little bit about me I have been in The trade of kitchens and bathrooms from the age of 18 I’ve gone through the rankings and have worked for myself now for around 18 or 19 years give or take whenever you doing Properties you never ever really know what you are going to find that is the joys of my job that is why I love it so much because it’s the unknowing of the unknown, which keeps you entertained and definitely keeps me going. Bathrooms wet rooms radiators boilers kitchens home design no matter what it is I will always find a solution to the problem regardless of how big the problem is I can always sort it out. So thank you very much for watching please like and share my videos and thank you again.
MJC kitchens and bathrooms
mjckitchensandbathroom,kitchen fit,kitchen fitter,plumbing,bathrooms fitting,bathrooms,wet rooms,diy,home diy,living,home design,old bathroom,old kitchens,fit bathrooms,fit kitchens,diy kitchens,diy bathrooms,tiling,tiler fitters,tiler,joner,work tops,reisen,new bathrooms,new kitchens,wet rooms Fitter,shower,shower tray,bath taps,kitchens taps,wast pip,toilet wast pip,fitting tolt wast pip,fitting sink wast pip,out Side tap,stop tap
Plumbing kitchen sink,plumbing basics,plumbing a bathroom,plumbing course,plumbing kitchen tap,plumbing kitchen sink waste,plumbing kitchen sink with dishwasher,bathroom design,bathroom remodel,bathroom installation,bathroom tiling,bathroom plumbing,bathroom sink plumbing,bathroom mixer tap,bathroom drainage pipe installation,bathroom,mjckitchensandbathroom,plumbing,bathrooms fitting,bathrooms,diy bathrooms,tiler fitters,new bathrooms,shower,shower tray

[@philowen2167]

Good job ....But doesn't look the best with the rail blocking the reccess...

[@joe6759]

Sack the camera man pmsl

[@baldvale5418]

Brilliant explanation for us mere mortals Thank you very much.

[@bishbashbosh121]

Always

[@jamesoates6309]

Hi, i have fitted a new shoeer bar, but havent changrd or touched the inlet pipes. I have a small leak out of each inlet valve where the covers hit the wsll. Will ptfe tspe on the olives fix this? Or will i need new connectors and olives? Thanks

[@bishbashbosh121]

yes

[@bishbashbosh121]

yes

[@paulledger91]

Hi I'm fitting these in next few days .. how much pipe do u leave outside of the valves for when u put the olives on

[@bishbashbosh121]

What you have to do is have a look on the pack and it will tell you normally about 30 mil but check the park first

[@paulledger91]

@@bishbashbosh121 cheers mate much appreciated

[@InfinityVideo1]

Can I fit a shower mixer valve on to bathroom plasterboard and tiles only? Does there definitely need to be wood behind ?

[@bishbashbosh121]

No, just as long as you can get the bracket on and the pip fixed

[@basimmaan4549]

Your camera need more a practice

[@antonypoole2174]

Can you tell me where you buy the drill bits from please.

[@bishbashbosh121]

£15 into my PayPal and I will post them out [e-mail]

[@HopetonChance-vr8ui]

lord

[@decg7315]

Rail blocking the recess is a total no no in my book 😮

[@malmes999]

Same!!! good job on the bar fit........but recess is a no go should have been to the left or right

[@MohammedAli-1]

Haha, love it. Proper no nonsense 👍🏽

[@funnystuff9954]

Can you lengthen the copper 15mm pipe if it's too short please???

[@bishbashbosh121]

not really. would stop the fitting going on

[@carlton683]

Mick how much copper pipe should be through the wall please

[@bishbashbosh121]

about 30mm

[@Drongo_123]

I’m about to fit a tower panel thermostatic shower, do you reckon fitting a pressure reducing valve or pressure equalising valve?

[@bishbashbosh121]

Hi yes I will definitely fit one if the pressure is high try and get it just after the stop tap

[@bishbashbosh121]

If you are on economy and the pressure is high into the problem I would always fit a pressure reducing valve

[@melodynewsome1308]

Good details pal👌

[@bishbashbosh121]

Thank you very much come over onto my tiktok

[@cjb4985]

Best in the business

[@bishbashbosh121]

Thanks you very much.

[@bishbashbosh121]

The link for the tile bits bish bass bosh mjc facebook.com/marketplace/item/722804891839417/