Suzuki GSX1300R Hayabusa - Nose cone removal - Part 6

[@durpoful]

Thanks, crashed my busa and needed to change my fairing, this was really helpful!

[@TheAmateurBikeBuilder]

Thanks Esmu, glad it helped, appreciate your comment

[@eric_b_3975]

Thanks very helpful. Please keep the vids coming.

[@TheAmateurBikeBuilder]

Thanks, will do!

[@chrislancaster4455]

Absolutely what I needed to see. Thanks for posting brother

[@TheAmateurBikeBuilder]

Glad I could help

[@MikeElliott1962]

Thanks for the video came off as discribed, will subscribe.

[@TheAmateurBikeBuilder]

Thanks Mike, glad it was of help and appreciate your support

[@rmcfadde1]

Very helpful, used this to convert from halogen to LED headlights. Thank U sir!!

[@TheAmateurBikeBuilder]

You are welcome

[@kevindavidson6715]

Great video man ! I have been putting off taking my busa apart (just for cleaning and winter Maintenance) but it’s easy as hell after watching your video! Thanks mate 😎

[@TheAmateurBikeBuilder]

Glad it helped!

[@flowchemplant1153]

Thank you for showing this!

[@TheAmateurBikeBuilder]

My pleasure, hope it helped

[@dt3963]

Was pulling out my windscreen to replace it yesterday and one of the rubber captive nuts fell down inside my front fairing. 5 minute job now turned into ripping apart the bike. I feel sick.

[@TheAmateurBikeBuilder]

i feel your pain, they can be a nightmare, especially if you drop something

[@stevespruiell306]

lowered the rear on my 2004 hayabusa. is there any vertical adjustment on the headlight assembly to get it back down outta the sky? Thanks

[@TheAmateurBikeBuilder]

Thanks Steve, This may help www.hayabusa.org/forum/threads/headlight-adjustment.96631/

[@jamesluster8473]

Thanks for the vids, they are very helpful!!!

[@TheAmateurBikeBuilder]

Cheers James, glad they are of help

[@banditnev]

Yes do enjoy the series.

[@TheAmateurBikeBuilder]

Thanks, more to come

[@akbikeriders93]

❤BRO please tell me the meter copooler wiring of this bike.

[@Himynemesis]

Awesome, Ive learned alot thank you Sir.

[@TheAmateurBikeBuilder]

Glad to help

[@MichaelRodriguez-wc9mr]

Thank you for your video. Helped me a lot, in the process of removing the nose to change the turn signals.

[@TheAmateurBikeBuilder]

Thanks Michael, i'm glad it was of help to you,appreciate your comment

[@thepunisher6231]

on gene 2 is removal of speedometer same? thank you

[@TheAmateurBikeBuilder]

I would imagine so, not worked on a gen 2 so unsure

[@TrippinBusa]

Question, My 2002 hayabusa will randomly not wanna accelerate when given throttle between 4000 and 6000 rpms, any guesses as to what the issue is? will start bucking like a bronco and wants to die but will come back when the throttle is rolled off.

[@TheAmateurBikeBuilder]

could be fuel pump i had a lot of similar issues, rust in the tank that was stuck in the pump, i did a video on it, maybe worth a look

[@flavacreations]

Thanks for the info appreciated

[@TheAmateurBikeBuilder]

glad it helped

[@redbaron2448]

Looks like it pops out without removing the clocks , if you do the Pins next to the mirrors pull forward it should pop out, yes

[@TheAmateurBikeBuilder]

Thanks, yes, possibly, but as i was stripping down the whole front end it needed to come out

[@ATrainAC]

Thank you. I'm Removing the nose off my Busa now. Any suggestions for an HID replacement install?

[@TheAmateurBikeBuilder]

Cheers Anwar, not something i have done, so not to sure, you might want to try the Hayabusa forums, they may be able to help

[@Jandejongjong]

We love you man!

[@TheAmateurBikeBuilder]

Thanks

[@rockitback3034]

I live in the U.S.A(Tennessee)-I have a 99 Busa and my fuel gauge is showing FULL. It will cycle through when the ignition is on(so i know it has power going to it but i know the bike isn’t full. Now i don’t really know what to do or where to go. Can u please give me some advice.

[@TheAmateurBikeBuilder]

Thanks Jason, Start at the sender, check as per w/shop manual. Might be as simple as a stuck float, If on normal key on sequence the gauge sweeps through a full range (empty to full) the gauge is probably good. The sending unit is now suspect. Raise the tank and unplug the unit. The gauge should now go to empty. this should indicate a faulty sender, hope that helps

[@justinmillard4320]

Thanks, great video, short sharp and to the point. helped me out and saved me potential problems

[@TheAmateurBikeBuilder]

Cheers Justin, glad it was of help,appreciate your comment

[@noelgarner2552]

Thanks great video

[@TheAmateurBikeBuilder]

Cheers Noel, Appreciate your comment

[@hickmode33]

Nice job, and yes very helpful. Thanks man.

[@TheAmateurBikeBuilder]

Thanks Tim, glad it has helped, appreciate your comment

[@PoppaTInstall]

Any ideal why my temp gauge is not working? I have a Gen 1 as well.

[@TheAmateurBikeBuilder]

Hello Poppa T, could be the radiator sensor,thermostat or sending unit, did the gauge used to work ? have you had any overheating problems ?

[@PoppaTInstall]

When I got the bike it was like that. No overheating. Watching your series to see if you cover what you just mentioned. Great vids! 👍🏾

[@SurreyRider]

Sure looks different without the fairing on :)

[@TheAmateurBikeBuilder]

it hides multitude of sins though

[@colinsharp1314]

Glad you doing the busa it's a great bike nice one Colin

[@TheAmateurBikeBuilder]

Thanks Colin, glad you are enjoying it

[@TheTomasPedersen]

Thank you for the breat guide! gave me the answers i needed

[@TheAmateurBikeBuilder]

Thanks, glad it was of help

[@TheTomasPedersen]

@@TheAmateurBikeBuilder kzbin.info/www/bejne/fpqyqXSXd6ekoas I did this tonight so need to strip it

[@teamcantedit8079]

Thank you for the great episodes... how is the easiest way to change the front electric lights on the busa? Bw Martin

[@TheAmateurBikeBuilder]

Cheers TGG, glad you enjoy the video's, do you mean unbolt the main headlight or change the bulbs ?

[@soulplaykeyboardmusic7384]

Tattoo in hindi wow

[@TheAmateurBikeBuilder]

Thanks

[@scottrankins9411]

Now that was helpful to take the cluster out , but my temp gauge only works when I tap on it already changed the thermostat & temp probe do I gave yo change the hole cluster ? For the temp gauge ?,??