Just what the title says. Start to finish with occasional cuts to save time/ remove interruptions. My first ever video. Hope it is helpful and enjoyable. Thank You. I created this video with the KZbin Video Editor ( / editor )
Пікірлер: 16
@jeebsacr58942 жыл бұрын
I just happened to come across your video. I have the exact same bike. Bought it brand new.
@mickusable5 ай бұрын
Didn’t notice you changing the crush washer on the drain bolt, should really do this to stop leakage.
@pacman96695 жыл бұрын
Y make a video of people watching you change your oil yea ur explaining but you Need to be Showing
@augmentedrealities8 жыл бұрын
Excellent. :)
@dimaoliver91997 жыл бұрын
which bolt do you exactly unscrew to get the oil out?
@rijuk457 жыл бұрын
Hello Dima. Sorry the video did not cover this clearly. If you look under the bike you will see a bolt ( the sump plug) located between the exhaust down pipes. It is easy to find and is very obvious as the lower fairing has a tool access clearance designed into it. Hope this helps. :)
@dimaoliver91997 жыл бұрын
Rij B thank you
@brandonhurley13878 жыл бұрын
hey i did a oil change on my srad the oil light is red and wont start any ideas need help baf
@rijuk458 жыл бұрын
Hello Brandon. Good thing the weather was crap so you didn't miss out. Does the priming come on? When you press the stater switch are there any sounds? Also a bit daft but try operating your kill switch a few times and see if you hear the priming intermittently. I have never had this issue. Let's sort it out together.
@brandonhurley13878 жыл бұрын
+Rij B. yes it has prime noise ...when u hit the start button it does nothing and the oil lamp thing flashes
@brandonhurley13878 жыл бұрын
+Brandon Hurley really weird to me i touched nothing oil level good and thank for reply i hope we can figure it out
@rijuk458 жыл бұрын
+Brandon Hurley Hello Brandon.I would say check the clutch switch. It s weird indeed as it was running before the oil change. I don't think it is a mechanical issue. else you'd have heard sounds upon depressing the start switch. I'll have a look at the cct diagram in the meanwhile. Good luck