Carb cleaning and tuning on 06 LTZ 400 Stock jetting: Pilot 22.5 Main 130
Пікірлер: 36
@rddowler211
Ok NEVER use brake cleaner when cleaning a carburetor, NEVER use carburetor cleaning to clean brakes. Carburetor cleaning actually has a lubricant in it to help lubricate the parts before fuel gets in it. If used in brakes they will squeak and not stop correctly till its cooked off. Second take some rubber gloves, spray with both. The ones with brake clean will get twice the size and fall apart. Same happens to your o rings and seals. They are labeled brake, Carb, parts, Electrical cleaners ect. For a reason not to make you spend money's.
@christophercamacho3415
I cleaned out the carburetor, put in the jets you told me and I can’t get the bike to run right
@JosephMartin-dk5gv
Ive got an 06 ltz400. It has a slip on exhaust and a k&n air filter. Ive tried a 27 and 25 pilot and it is still hard starting. Any help is appreciated.
@christophercamacho3415
So what do you recommend for the main jet size wise? And then for the pilot? I’m having the same issue where it takes forever to start on a cold start and sometimes it shuts off on idle I have to remove the carb and clean it out but I want to upgrade the jets
@josuefigueroa554
Can you make a video adjusting the float mine spills so much gas when cranked or priming.
@christophercamacho3415
I replaced petcock cleaned tank did everything
@travjones374
Looking to put a big gun evo r slip on exhaust on 2007 ltz 400. Completely stock elevation around 300' wat size jets do u recommend
@MannySerrano-ms9ib
i have a ltz 400 and i plan on doing the tune up tomorrow and i also have a lexx slip on exhaust im putting in stock header. i know you have to rejet if you put any exhaust on but i wanna run the air box lid off. what jetting size would i have to use for the main jet? i have a jetting kit wijt a lot of sizes and i don't know which to use this will be my first time opening up the carb.
@ogdu7702
thank you for this video
@gagegarton6844
What kind of screw is the air fuel screw? Flathead? Thanks for the video
@oryx070
Hey Dom, My quad stalls easily in first gear, It also sometimes shuts off when giving gas holding in the clutch. Could the carb be the issues or something else?
@Aaron559Vlogz
🙏🙏🙏
@Aaron559Vlogz
Hey brother what’s the good jetting for the same quad but I’m in California and my elevation is 223 feet