Suzuki Quadrunner 250 - Front Axle Replacement - Link for CV Boot Replace

Removing the axle on the Suzuki Quadrunner 250 - getting it ready to replace the boot. Check the link below to get your BAD CV Boot replaced.
Video link for boot replacement: • ATV Axle Drive Shaft C...
Ebay CV Shaft Boot Banding Tool: www.ebay.com/i...
Link to puller: www.ebay.com/i...
A-arm Bushings: amzn.to/2T06mBq
Brake Shoes: amzn.to/357dpxJ
Carb Kit: amzn.to/36Syo8j
Cleaner Link: amzn.to/2UUYfrj
Ultrasonic Cleaner Link: amzn.to/37DDs0p
Service Kit: amzn.to/3kJOmGP
Oil: amzn.to/3kMLwAS
Carb Kit: amzn.to/3fdDHTG
Carb Video Check Out: • Chinese Unbranded Knoc...
Also more common repairs with the ATV check out:
• HOW TO - Clean Carbure...
• HOW TO - Suzuki King Q...
• HOW TO - Suzuki King Q...
Mid Nebraska Motorsports YT
PO Box 23
Central City, NE 68826
VENMO is: @midnemotorsports
Check out my eBay store at stores.ebay.com/midnebraskamotorsports
Shop for parts at: midnebraskamotorsports.com
Instagram / midnebraskamotorsports
Patreon / midnebraskamotorsports
Facebook: / midnebraskamotorsports

[@johnscribb6731]

Thank you for the video! These small Suzuki 4x4's with rear independent suspension are recently getting more popular with age, high demand in my rocky area of Pennsylvania. The shop manual is vague and your tutorial really helps, a picture is worth a thousand words. Please do more videos, Thumbs up!

[@JasonVoorhees-je9xc]

Excellent vids! I couldn’t find a vid of how to rebuild the cv joint. Could you make one? Thanks

[@carlmontminy4254]

the 1987 LT-4WD is different. The front axle used on 1987 models is equipped with nonserviceable outboard and in- board universal joints.

[@MidNebraskaMotorsports]

Thanks for the comment Carl. Hit the subscribe button as we have a lot more videos coming out on this machine. If you need parts or tools for the job check us out at www.midnebraskamotorsports.com/

[@andymurphy163]

Any information on removing the axle from a 1987 lt4wd ?

[@kevinvieyra7468]

Thanks, very informative!! Any chance you could go over the differential oil change on the quadrunner? It appears to me that the rear diff has separate oil from the engine. There sure appears to be a filll cap..But I don't see any port to check the level.

[@dickiekallam7885]

I have an 89 model It clicks only in 4wd If I jack it up no noise only when it’s on the ground and it don’t matter if it’s straight or turning can that still be a bad axle.There is no noise with both axles out so I’m guessing the front diff gears are good Thanks

[@andresandstrom1752]

Having trouble getting the frontaxel out as in the video. it´s stuck. Any tricks? 250 quadrunner 1990.

[@MidNebraskaMotorsports]

Patience is all you need. They can be a real challenge. Make sure you are pulling straight out and not and any kind of angle. That snap ring inside has to center itself and that might take some time. Sorry you are having issues. Let me know if you can't get it. I can fly to your house and help out ; )

[@kylemiller8195]

Do I have to have the axel in if I don't want 4x4

[@xxhunterxgradyxx5792]

Quick question, it doesn't have to do with this video but I cant find anyone to ask except you, do you have to take the motor out to change the stator in a 2000 honda foreman 400, please get back to me

[@felyxsolis7575]

Hi good video! I’m trying to find the axel front right, you have an idea where I can order it, and the mesures or specs, I ordered one but was a wrong size . Thanks

[@stevenlopilato8267]

I’m in the same boat as you. I’m having trouble to find a new front right axle

[@felyxsolis7575]

@@stevenlopilato8267 hi! I find one but is so expensive for be a used one, I guess I will have to rebuild it.

[@billmers3219]

thanks man appreciate it nice job!! Getting parts for my quad can be difficult at times ( I have the same machine) Where do you recommend getting aftermarket parts for these machines?

[@adenmustafa7101]

Pro trick: you can watch movies at flixzone. I've been using it for watching lots of of movies recently.

[@malachinova6106]

@Aden Mustafa Yea, I have been using flixzone for months myself =)

[@connorleath5914]

I have a ‘98 or so Suzuki king quad and am trying to get the front left axle out, would it be the same for mine as it would what is shown in the video or is it different?

[@connorleath5914]

@@MidNebraskaMotorsports alright thank you so much

[@jacobbender5449]

I have the same problem and can't see the old comment, can you tell me?

[@johnscribb6731]

@11:50 in your video, I am at this point but the drive shaft is not pulling out. I yanked on it several times but seems locked in. Does it float in there or is it held in by something?

[@johnscribb6731]

I want to link this youtube video because it really helped me to get this stuck axle out. They sometimes lock in on these old quads and dont simply pull out by hand like they are supposed to. I tried everything but it would not pull out until I found this video and it worked perfectly, the axle will pop right out. kzbin.info/www/bejne/hpiwgWSChdOribc

[@jacobbender5449]

I have the same problem, did you ever figure it out

[@johnscribb6731]

@@jacobbender5449 yes, and i watched this video kzbin.info/www/bejne/hpiwgWSChdOribc It worked and the axle popped right out.

[@jacobbender5449]

@@johnscribb6731 thank you sir, I got them out. But now the bolts holding the diff are stuck and rusted in.

[@johnscribb6731]

@@jacobbender5449 kzbin.info/www/bejne/hpiwgWSChdOribc This is a great resource for these old quads. I also have a few issues with mine but it's worth to fix them. I really like mine.