Üdv. Ólvasad el!!!!!!!!!!!!!!!!!!!!! A Főtengely végén van egy csapágy !!!!!!!!!!!!! Oda megy be a nyeles tengely,ha az meg van kopva,melegen tud ilyen hangot ki adni!!!!!!!! Dodi Hungarian. Szép napot!
@BorisEkner4 ай бұрын
Looking forward to the next video. 39:56
@BorisEkner4 ай бұрын
14:05 You got a magnetic tray for the bolts and nuts! Finally!! 😁
@FixLife1194 ай бұрын
@@BorisEkner LOL, I've had that for at least 10 years, just one of those tools I never think to use, but after you and some other people mentioned it something clicked in my brain lol.
@BorisEkner4 ай бұрын
Memory flashbacks … I replaced the 45 kg/99 lbs auto transmission in my Gen3 Jimny just as you did it now, lying on my back under the car. I had it softly land on my chest. …I was way younger then…
@FixLife1194 ай бұрын
@@BorisEkner Yeah I think if it was much bigger I wouldn't do it unless I had a trans lift. This lil feller was tiny, but still not easy. Sucks that they have to turn to come out instead of dropping straight down.
@FixLife1194 ай бұрын
@@BorisEkner Wait till you see how it goes back in. My roommate's Uncle Wayne wanted to help but there wasn't room for 2 so let's just say I did some rigging lol.
@numbskullskills4 ай бұрын
man thats a little guy, didnt look to bad at all
@FixLife1194 ай бұрын
@@numbskullskills Right, it's like a toy lol.
@numbskullskills4 ай бұрын
@@FixLife119 did you get it back together, did the noice go away?
@davekeehn83884 ай бұрын
The 5th gear switch is for the carb ECU to lock out the EGR on stock SJ413s. Clutch and bearing look fine. Cable needs adjustment.
@FixLife1193 ай бұрын
Oh ok, thanks. Yeah I heard the stock carbs on these were partially elec controlled, this thing actually has an O2 sensor lol. At first I thought about swapping the sensors because the one for 5th gear still had the wires attached but as soon as I touched it a wire broke off and I had to solder it back on. Sounds like it won't serve a purpose on my rig but it's there if someone ever puts a stock carb back on it. So the new throw out bearing makes noise too, not as loud but you can still hear it... do you think it needs less tension so the bearing doesn't get thrust as far in? Hey thanks for the comments!
@davekeehn83883 ай бұрын
@@FixLife119 Keep the 5th gear sensor as a spare reverse light sensor. If someone swaps the 3K for a stock carb, they deserve the pain it will cause. There’s an adjustment procedure in the manual. You’ll need to do that anyway since you’re doing the clutch job. Off hand I think it’s 1cm of play until engagement on the pedal.
@FixLife1193 ай бұрын
@@davekeehn8388 Lmao!, right. Prob can't get to it without dropping the trans but it's there if someone needs it. I'll see what Haynes thinks the play should be on the cable. Thanks bro!
@1shotbarbeque8814 ай бұрын
Mines got a 6" ground from neg to firewall right behind the batt
@FixLife1194 ай бұрын
@@1shotbarbeque881 That's great, the shorter the better. When I ran mine I didn't want to make a new hole so it's a little longer but I've heard these thing have big grounding issues from the factory. I did a video where I dropped the windshield and ran a ground to the wiper motor and counted the wipes per minute before and after grounding it, it did help.
@BorisEkner4 ай бұрын
I don’t know how the Samurai is wired electronically, but I know how weird my 2022 Jimny is. It has a constant positive, and when for example a light is turned on ground is added to the circuit. I have no idea why Suzuki decided for this weird design because it is truly a confusing experience.
@FixLife1194 ай бұрын
@@BorisEkner Yeah it's kinda weird. I got used to the neg door trigger (dome lights) and neg door locks so now it feels weird when some of them are positive (usually American vehicles).
@BorisEkner4 ай бұрын
@@FixLife119 Until I had my 1998 Gen3 and now my 2022 Gen4 Jimny I have never experienced a permanent positive in any vehicle. That said I have heard that other manufacturers have adopted the same wiring.
@FixLife1194 ай бұрын
@@BorisEkner I've always hated the way Ford does their plugs, especially in the doors for the locks, windows, mirrors etc, but I have to say the plugs under the hood on the Samurai are some of the goofiest things I've ever seen lol.