I wish I'd seen this a year ago! Got caught out by the ABS difference when I replaced my 08. As far as I can work out the only reason is to clear the ABS module with the rear tyre.
@Mad8vCycles2 жыл бұрын
Yep sounds about right
@robcanning85342 жыл бұрын
@@Mad8vCycles Adjusted all the way to the end (3 links less from memory) and I still got the GSXR 180 on there with the ABS module spaced down to clear the ZX shock. Mods clashing with mods interfering with mods. SV lyfe...
@georgiosphilos21462 жыл бұрын
I believe the 03N, 04 swingarm apart from the mounting holes difference, is also slightly longer than the 03S.
@BB..........2 жыл бұрын
That's what I'd read too, about 15mm difference.
@Supernova12034 Жыл бұрын
very interesting, thanks for this
@dementeddevil2 жыл бұрын
Now that's all cool and all. I'm interested in whether GSXR swingarms can be fitted to any SVs. Again I don't think my 2nd gen SV1000S needs an under braced swingarm but it would look lovely...
@Mad8vCycles2 жыл бұрын
Ive personally never done it. Ive seen svrider.com posts with it. But seems like an unnecessary mod. Also, keep in mind if the 650 can take it, the sv1000 is different so might not.
@dementeddevil2 жыл бұрын
@@Mad8vCycles honestly I can't be bothered tackling some of the more plausible mods (front end swap for example) my bike handles good enough for the road although I am eying up a radial brake master cylinder...
@Mad8vCycles2 жыл бұрын
@@dementeddevil careful with those. Need to find one where it wont hit the fairing at full lock to the left
@dementeddevil2 жыл бұрын
@@Mad8vCycles thanks for the heads up
@motoquincini.456 ай бұрын
Hello mate. Are the S & SA Gen2 swingarms interchangeable? ie. Is the frame on a SV650S able to take the longer SA abs model swingarm?
@Johnnyreengo6 ай бұрын
Does the SV1000 handle well like the 650?
@Mad8vCycles6 ай бұрын
A little worse because of the weight and a little touchier because of the throttle. So a bit worse in the twisties. But way better on highway.
@BB..........2 жыл бұрын
Is the '03 S swingarm the same length as the other 1000 'arms? I thought the later ones were about 15mm longer, but they all look the same here.
@Mad8vCycles2 жыл бұрын
Same length just different spacing on the chain guard
@rickybobby76602 жыл бұрын
Did you measure the length and weight of them all?
@Mad8vCycles2 жыл бұрын
not really, just compared. cause it's not like any of them fit across (except abs and non-abs) so what would be the point
@braverabbit3 жыл бұрын
Wow, that's 4 lbs difference. Is the 2g abs swing arms interchangeable with the 3gen
@Mad8vCycles3 жыл бұрын
no. the 2g has a wider pivot and the linkage mount point is a little different as well
@braverabbit3 жыл бұрын
@@Mad8vCycles That was interesting. Its hard to understand why Suzuki went this route, frame, sub frame, and swingarm all weigh more than previous gen, 25+ lbs total I'm told. The v twin is already a heaver design, if they would reduce weight both internal and external weight the sv would be competitive with the inline twins such as the MT 07 which weigh much less.
@Mad8vCycles3 жыл бұрын
@@braverabbit i would bet that they wanted to stick to a price point (svs have pretty much always been $7-8k new) while dealing with increased manufacturing and materials costs?
@sovietsuperfuel3 жыл бұрын
What about the SFV?
@Mad8vCycles3 жыл бұрын
We dont talk about the gladiolus.. tbh ive never parted one cause there just havent been that many sold
@sovietsuperfuel3 жыл бұрын
@@Mad8vCycles isn't the 3rd gen just a dressed up Gladdis
@Mad8vCycles3 жыл бұрын
It's a bit different. They made a lot of changes.
@Mad8vCycles2 жыл бұрын
Got a gladius lol. Swingarm looks the same as the 3g one
@sovietsuperfuel2 жыл бұрын
@@Mad8vCycles Look at you, going above and beyond! I kinda figured they would be the same. Seemed like Suzuki spent as little as possible when they rolled out the 3rd gen.
@dang13032 жыл бұрын
Will any of the sv1000 swing arms fit a 2nd gen sv650n?
@Mad8vCycles2 жыл бұрын
No. The shock mount is on the wrong side. Not even sure why youd want to?
@dang13032 жыл бұрын
@@Mad8vCycles Ahh, ok thanks. We'll if it was and easy fit then was thinking sv1000 rear wheel aswell for the 180 rear tyre 😂
@Mad8vCycles2 жыл бұрын
@@dang1303 you can do that much easier than swapping swingarms. twfracing.com sells an adapter kit to fit a gsxr or sv1k rear wheel onto a 2g
@dang13032 жыл бұрын
@@Mad8vCycles Thanks for the link! I have come across twf in the past. Only problem is I'm in the UK! Thank for the info 😁
@Mad8vCycles2 жыл бұрын
@@dang1303 hmm, someone might do it over there too... see if some of the minitwins guys on svportal have anyone (or if they just order from zoran @ twf)
@SexyKnight0111 ай бұрын
How much less does the 2nd Gen weigh compared to the ABS model?