Homebuilt Carbon Rotor Blades part 3

[@mateobrainardo4770]

Please PLEASE Record video of test flight, any modifications and success. This is one of THE BEST KZbin videos, and we all THANK you, Ljubomir! Mateo, Tennessee.

[@mb4lunch]

Nothing better than seeing people make cool stuff like this!

[@Aluminata]

Very few men do not dream, some where in there heart, of building a helicopter - very, very, few men try. Yours is a commendable undertaking radiating inspiration through out the world! I cannot imagine how you made that beautiful swash.

[@svosius]

+Ralph Latham Nice words were spoken. Thank you

[@EddyBuedts]

Ik heb enorm veel respect voor deze vakman ❤

[@clunkonester4884]

I really love the unique design of the swashplate mixer, I find it quite mechanically difficult but I see you used those cables installed after the collective input! Brilliant my dude! I really hope this flew well for you!

[@radailjubarankovic4298]

... globe is my personal idea old ten years

[@sinisabasic6705]

Gospodine Ljubomir divno ste to uradili.! Svaks čast,a i traktor je tu👍

[@radailjubarankovic4298]

... dragi Basicu bez sela nema pravog zivota sa dve reci pokazao si da si covek buducnosti

[@draganjovicic1203]

Bravo majstore .. predstavi se ..hvalaaa

[@anaji5723]

Good Profesional engineer.

[@jasminplavi1451]

Postovanje gospodine.Sa li ste vec probali da letite sa vasim helikopterom Ja kako vidim sve je spremno.Sretno

[@brianclintone308]

Looks great...did it ever fly?

[@damirdessanel3528]

Ija pravim helikopter za dvije osobe jos nisam nista objavio na youtube osim jednog videa kratkog!!.pozzz

[@svosius]

Znaj da ce biti bezbroj problema i troskova. Damire, Mi se igramo "igrackom" opasnom po zivot. Elise vrse centrifugalnu silu na glavcini od bar 1 tone ! Jeftinije je kupiti od : ROTOR BLADES, VORTECH. INC. USA , i bezbednije. Lakse je ispricati kako da naslikas Mona Lizu nego kako da napravis propelere od karbona . Pozdrav

[@damirdessanel3528]

Zadnji propeler sam uradio bez problema i ok je nema vibracije nan 5000rpm sam imam problem za glavni propeler kako ga napraviti..koliko kosta onako kao kod vaseg izgleda jako kvalitetno??? Koliko bi kosralo dva propelerea dimenzija 3,20mx16cm

[@svosius]

Ja cu uskoro objaviti video materijal o kompletnoj izgradnji mojih propelera.

[@radenikolic728]

+damir dessanel ako pravis dve elise koje se okrecu suprotno zadnji Propeler ti ne treba Poz.

[@polyborus5177]

Любомир молодец! Всем ребятам в пример!

[@ayrwynharrison898]

love the videos. Great work! thanks for posting.

[@escapadechannel8379]

oooh this dude did it all him and his wife ,lots of respect man

[@ljubomirrankovic4296]

Thank you

[@pkrisztiful]

Gratulation!!!! Hungaro Copter Team ! From Hungary.

[@svosius]

Bravo Hungaro Copter Team, thank you

[@tonyemory3618]

looks like solid engineering with the exception of the hose clamps on the main spindle, Hope your first flight goes well. Good luck.

[@svosius]

Thank you

[@DanFrederiksen]

Very nice. So what's the status?

[@svosius]

we ll see

[@guillermoguanco7300]

Flying enthusiast here,and an artist also,,looking forward for your safe first fligth test,and improve more inovations to developed to make safe flying.

[@jadkvenice8986]

This is a great job and I want to know the birth process. Thank you

[@ehab3244]

if it flied ,please give me design of your helicopter with used material, image or autocad ,it's really fantastic ,i hope to try did it in my country great work , can you show us your helicopter flying ,Finaly Thanks

[@svosius]

"Patience is mother of all vitrues"...Latin...

[@xandysorvetes0874]

the ballerina's secret, congratulations for showing. Do you think that two pieces joined together to form the oval core you need, can also work?

[@MGszamanVlog]

Hi can I use part of your video to my compilation homemade inventions ?

[@tavipap]

Great job! YOU are a master! 💪

[@sarawutkhongkhasi3635]

Octavian Papara ตใซ,๘ย

[@jeroenjansen2709]

Amazing skills to build a helicopter by yourself👏👏

[@tunercamp]

헬리콥터 날아가는 장면은 없나요? 엔진 스팩도 궁굼합니다

[@ramonjao1619]

I would Love to see this wonderful creation fly.... my dream to fly and built this chopper... hope you invite me to be your apprentice and no salary will be fine... just teach me how! Thank you 🙏

[@ayedimouhanned9076]

Hello sir you can tell me where I can find (6:11 ) de video?

[@idontneednostinkingchannel6848]

Outstanding workmanship. A true artist. Blue skies OM!

[@voanirges]

dobro uradjeno jel ima snimak gde leti ?

[@damirdessanel3528]

svaka cast !!!!!!!! super projekt !!!!!!

[@svosius]

Hvala

[@joenimrichter8965]

How do you deal with rotor balance and airframe vibrations?

[@leviterande]

interesting, how is it going now ? is it soon ready? we want to see more!

[@svosius]

We ll see

[@navigator_071]

Svaka cast Ljubo, samo naprijed! ps Vidjeo sam da je jedan proizvodjac ULM ova u Francuskoj, dodao turbo- punjac na takvom motoru ( Visa Club, doduse ali to je isti taj motor, malo jaci).

[@SaltLakeCityUCE]

You Guys are awesome! In a tent, in a field...I love it!

[@svosius]

Thank you

[@Zunaid1201]

Hi Sir i really like the way you have your parts made. Do u have some diagrams i can copy. Especially swash plate an rotor head. My email address is [e-mail] pls send some plans. Also the rotor blades i need some help... Regards Zunaid from South africa

[@chengzhu9975]

Hello, very sorry, I need to ask you some questions about the helicopter, I know how it is controlled up and down, but I don't know how it is controlled. Can you tell me?

[@georpats8709]

how much does it cost to build this helicopter?? i am a university student and i make a effort to construct a helicopter but i did not able to find a rotor and swashplate . could you tell me any site.

[@svosius]

Rotor head must home built. Uses the internet for knowledge

[@CripSkillz]

This project is so awesome you are doing great job with what you have and I'm super impressed with your skills! Keep doing what you do!

[@radailjubarankovic4298]

... thanks

[@learnengineeringinurdu7498]

I want to ask you something. I want to build a helicopter, it's just a dream of mine, I don't know how to bleed it. Please help me.

[@enriqueramirez9980]

Wao Dios lo bendiga que genialidad lamentablemente no poder ver el proyecto terminado bendiciones y a su compañera también espero que lo allá puesto a volar bendiciones.

[@nathanielbradford548]

Very impressive mate, well done 👍☺️

[@Xaxaxa1927]

Hello. Reci mi zašto njegove performanse motora, i koliko dugo rad uzeo vremena i da li je oslanjajući se na to. Hvala vam na odgovoru

[@svosius]

28 HP, the hardest thing is to purchase materials, workshop...many of the details

[@raydreamer7566]

I thought I was listening to a VW motor but it is not a VW motor . What motor is that 4 stroke motor ?

[@vicpico1]

Great & Awesome...! Congrats ! do you have video of a step by step on how to build or a kit i could make one.. i have the motor already from a Volks,... I appreciate your help.. Many Thanks

[@arseniynaumov135]

Main rotor mechanization is a masterpiece Aircooled engine is advantage Carburator is disadvantage Longtale pipe with a talerotor is disadvantage Wife involvment is advantage

[@mancingmanila]

High IQ how the way to creator a machine became flying 👍

[@m.dubois1330]

Bravo! Your helicopter looks very good. A marvellous project. I hope you have a safe test flight! Bravo ! Vaš helikopter izgleda vrlo dobro. A divno projekta. Nadam se da imate sigurnu probni let !

[@svosius]

We are creative boys, bravo za civilizaciju

[@World-as-i-c-it]

Fly or not, impressive fabrication skills.

[@doniherdiana718]

Your work is very good. I am interested in your expertise. Can you help me to learn with you about making a mini helicopter and can I buy rotors and other parts of your work?

[@silentdeath9237]

Do you have to balance the blades to they both match to eliminate vibration?

[@commentatron]

He wanted to, but the missus said no.

[@mustangbob51]

this helicopter is beautiful. I hope you post your test flights! did you build this from commercial plans or did you come up with this on your own? keep up the great work!

[@svosius]

This is my TOY and my personal design, because it is my hobby. But for a number of crucial helicopter features there are not many options to choose from. Greeting

[@mustangbob51]

greetings from the United States. have you progressed more since this video? in part 3 it appeared that you have most of the construction done. can you post an update?

[@svosius]

I will do it

[@Uciferzalunje]

svaka cast na ovome i ako moze jedno pitanje koji su troskovi za izgradnju jednog ovakvog helikoptera?

[@svosius]

U mom experimentu-- puno

[@dessaneldessanel5933]

ja sam nekoliko puta htjeo da odustanem od projekta jer bas kao sto vi kazete to je opasno ,Al svaki dio kad napravim imam vise volje nadam se da ce bit ok samo sto jam ja poceo preveliki helikopter da pravim neznam ni ja sta dalje....uskoro cu staviti jedan video ..veliki pozdrav i viste pravi umjetnik svaki dio vm je precizno izradjen!,

[@svosius]

Ne zelim da te destimulisem, lepo je baviti se tehnikom. Ali ne smem ni da te stimulisem. Cuvaj se i zadnjeg propelera, stalno kontrolisi da se ne otkine, leteo bi brzinom metka...pozdrav

[@อรุณศรีมณีสีแก้ว]

Ljubomir Rankovic

[@aleksmilenkovic1592]

Majstore Rankovic!!!

[@alih.al-maliki8496]

Are the blades made of fiberglass or plastic?

[@commentatron]

Papier-mâché

[@alih.al-maliki8496]

@@commentatron thanks 👍

[@Putralalan16]

I've seen it to the end 👍👍👍

[@br5747]

Nice job..... but if he gets any closer to that rotor she'll be wondering what she's going to do with the helicopter.

[@tbramich]

did you design and build your own swash plate and tail rotor cotrols? if so can I get some better close up pictures to give me some ideas please. thanks, tom

[@mitchm7563]

did you manage?

[@KiKeHS]

WOOOOOOoooOOOWW!!! Great job !!! Nice helicopter also I hope to see test flights!!!

[@svosius]

Thank s

[@РавильБальбеков]

Сколько по времени, сделал.

[@ksandr2889]

3:06 Motor sounds like Anakin Skywalker's podracer ))

[@jakevimont7776]

Lol!

[@tornerongkamayvlog1009]

Nice sharing we have try this one

[@sherrigaskin5656]

As I'm watching this I see the Coyote from the Roadrunner cartoon building a helicopter and we all know how that turns out. 😁💀

[@commentatron]

When are you going to post more vids of your homemade space shuttle?

[@canaldogonzo]

Very nice! Congratulations!!!

[@svosius]

Thank s

[@HappySexyFlyingFish]

Greetings from America! When will we see it fly? You did a wonderful JOB!

[@svosius]

Thank you ( creative fish ! )

[@ronaldpfaendler9375]

Very nice Helicopter, great work. :-) Is it possible to get the building plans? Maybe one day I will start also a Helicopter programme :-) Best regards

[@vitoriowaltari3511]

Bravo majstore svaka casti

[@Ми-2]

Уважаемый, Ваш аппарат полетел или нет?

[@РавильБальбеков]

А могли бы вы сделать видио как и из чего сделаны лопасти. Спасибо

[@antoineblanchard]

great job ,best regards for you and you wife.

[@svosius]

Thank you, my wife says

[@dessaneldessanel5933]

super hvala vam!,,,gledao sam na,ebay taj lezaj jednosmjerni.h ala jos jednom i veliki poz....i nadam se da ce bit jos neki vas video od vaseg projekta....

[@sonukumarmarandi4993]

sir small generator ka engine se chala sakte hain?

[@flaviof9282]

Great job brother

[@hussenalmuswi226]

هل تستطيع اعطائي معلومات عن حجم مروحية الطائرة... ارجو الرد please

[@leanbean8376]

What vid does you fly this contraption??

[@svosius]

Engine is CITROEN 2cv, 602cc, Pozdrav

[@dejanradulovic4771]

Ljubomir Rankovic Pozdrav , postovannje ja sam zmajar ali imam prijatelja koji radi na smogradnji helija to je ljubisa iz skorice volli bi smo da nam date neku adresu ili tel za savete i konsultacije. Ljubisin tel. [phone]. i mob [phone].

[@svosius]

Iskreno da vam kazem , ne zelim da dajem savete. Svako na bazi svog znanja mora da snosi posledice. Ja samo pokazujem sta sam JA napravio. Izvinite momci. PS : njihova rotor glava je falicna. Samo se setite sta je sve izmisljeno pre helikoptera. Pozdrav

[@Aluminata]

+Ljubomir Rankovic Not enough power - get an MZ 202 60 bhp @5800rpm

[@otacisintitoistaljin5504]

+Ljubomir Rankovic reci te mi samo gde ste nabavili materijal za Elisu..poz.

[@paramotorsrbija6934]

+Ljubomir Rankovic molio bih da mi se javite 0629659030... i sam sam dosta konstruisao pa sam hteo da se konsultujemo ako ste zainteresovani...

[@kamalulg]

Sir you ar just awesome.....!!!! where is flying.... vdo

[@svosius]

Dear Islam , next year

[@ganeshprasadsingh7468]

Please I want to know about this engine cc . What is the rpm ratio between main roter & tail roter

[@vicpico1]

Looks like VW engine.. may be a 1.6 - 2.0 cc engine ,,, Kool .. my fried use to use this idea 20 years ago ! hehehe

[@srikanthgari5762]

@@vicpico1sr engine cc.. company plzz tell me sr

[@srikanthgari5762]

Rpm speed.. hp... engine company plzz

[@chinthakaspriyankara3905]

I like that... I need to make, What is the engine Brand?

[@sherrigaskin5656]

No disrespect. He could be a Skunk Works engineer, it's the backyard aspect that makes it Wile E Coyote ish. Steve

[@touresaidou9314]

J'aime beaucoup votre métier, bon courage, j'aimerais un jour fais comme vous, merci et bonne journée,

[@yura13berlin]

Excellent design! But what will you do, if the engine or prop fail, and you are at altitude ? May be it's better to design manned octocopter, which is 100 safe, when even 2 engines fails ?

[@mw01720]

Yura B You auto rotate...In fact the higher you are the better. This looks like a very low inertia system so I'm not sure how well this autos.

[@KHA7V]

Nice Work

[@marcindreksler4263]

Brakuje żyroskopu stabilizującego. To może być niebezpieczne przy niespodziewanym podmuchu.

[@dessaneldessanel5933]

zdravo..jedno pitanje kako ste rjesili freilauf ?... kada se motor ugasi ? imam problem neznam sta da ugradim da prilikom gasenja motora i dalje da se okrece ekise da nebi naglo stalo?.inace bi pokidalo sve,,,hvala.pozz

[@svosius]

U pocetnom delu prenosa snage a to je veci kaisnik, nalaze se dva kugl. lezaja. Jedan od njih je JEDNOSMERNI. Za vece snage veci lezaj. Pozz

[@Yovanis_R_benavides]

Maestro que diceño donde puedo comprar un motor de esos para aserme un elicoptero a si

[@MaurizioBarberis]

complimenti, che motore ha installato? quanti cavalli riesce ad erogare?

[@svosius]

Hvala na "complimenti" Motore circa 28-30 HP ?! CITROEN DIANA, 2CV

[@JorgePPG]

28 cavalli ha detto in un commento, ma secondo me non bastano, pensa che un air mosquito ne ha 60. Magari fosse soltanto un problema di potenza, non hai visto che a 25% RPM il disco rotore è diventato talmente conico da perdere abbastanza portanza er non riuscire ad alzarsi? ...e solo al 25, pensa a 104%

[@mrboby5]

Amigo una consulta donde compraste el rotor principal ? O lo fabricaste tú?

[@137Majko]

Dobrý deň ste velice šikovný majster Tiež sa chcem pokusit vyrobit podobní stroj na lietanie .

[@svosius]

Ja vama zelim uspeh, dear frends

[@sherrigaskin5656]

Instead of 5 skinny v-belts that can slip how about 1 3in belt that's splined like they use on a Top Fuel car superçharger. No slippage there. Steve

[@kennethmeyers267]

Is your motor a vw motor?? Its cool. I hope it works. God Bless us all

[@rushattaichin3433]

такой молодец!!! респект и уважуха!!!

[@ljubomirrankovic4296]

Thanks for the remark

[@pachecodantemiguelleo.9208]

Can i see the blueprint or sketch?

[@henrycontreras755]

What kinda motor I can use for make a helicopter

[@pimuce]

Henry Contreras i think engine car will be correct but a good strong engine ! We can see on this video that man uses a 2cv Citroën french car ! And uses a good transmission for main rotor and tail rotor

[@ArnoldsDesign]

You are a mechanical genius. Beautiful aircraft.

[@svosius]

Thank you

[@horvath14041984]

What kind of engine are you using for this

[@dago2259]

you are a genius¡¡ nice machine¡

[@z3compactsonyxperia718]

Sometimes I wonder if I can assemble a stool from IKEA, and here they make helicopters. Smartly.

[@pimuce]

Z3compact SonyXperia 2cv Citroën french car engine complicate to make homebuilt rotor

[@ExploringCabinsandMines]

Wow, good job keep up the hard work!

[@svosius]

Thank s

[@cirocorzo8951]

I would like to know the engine and the rest of the mechanics of the helicopter greetings from Argentina

[@robinkumar9086]

sir u are genius. I would like to see your helicopter fly.