Sei meglio del libretto d'istruzione. Complimenti e buona strada ✌🏻
@doug94374 ай бұрын
I'm 15 seconds in, love the dog lounging, what a great small workplace you have. I'd love to spend time there. Thank you for all of your videos & information.
@gsd32i4 ай бұрын
Glad you enjoyed it
@pierrebodart45774 ай бұрын
Eventually I find out what I need for my 2022 GSA. Will order in Belgian site (where I live), same price but no custom fees. Excellent video as usual. Safe ride !
@gsd32i4 ай бұрын
Thank you...the GSA uses some of the pieces that aren't used on the GS model.
@pierrebodart45774 ай бұрын
@@gsd32i
@pierrebodart45773 ай бұрын
@@gsd32i Installed on my GSA, very comfortable ! no backout ;-) Thks for the video.
@gsd32i3 ай бұрын
@@pierrebodart4577 No problem, one of the best items I have purchased for my GS 👍
@chrisd33944 ай бұрын
Thanks, i'll changed my footrests to MK4 Pivot Pegz (touratech,....). They an additional angle. Nice to drive on gravel roads😉 SW-Motech is really nice, i have the complead Trax System 😎
@davechavis42754 ай бұрын
pivot pegs on my 1250. awesome!
@gsd32i4 ай бұрын
Very nice!
@plubal3 күн бұрын
Hello and thank you for your great video but I have a doubt about the height of the footrests and it is one of the conditions for me to buy or not this article. You say in the video that in the low position the height is equal to the original and that we can put it 15mm higher in the high position, on the SW Motech site they say the opposite, high position equals original height and low position 15mm lower than original and that is what I am looking for so I really have to be sure. Thank you in advance for your answer, have a good day.
@gsd32i3 күн бұрын
Let me have a look and I’ll get back to you . Very nice foot pegs BTW👍
@gsd32i3 күн бұрын
I’ve measured on the bikes centre stand . The lowest position will mean that from the floor to the top of the rubber is 38.8cm and 40cm when you spin the cam around . 38.8cm is what gave me the standard peg position with the rubber inserts in which add about 5mm to the foot peg . Hope this helps 👍
@plubal3 күн бұрын
@@gsd32i Hello, thank you for your quick and precise answer, I have the answer to my question but unfortunately it does not suit me because I would especially like these footpegs to be lower. Thank you again for your answer and have a good weekend.
@gsd32i3 күн бұрын
@@plubal No problem
@christiantoth79594 ай бұрын
I'm already curious about your driving report. I would also like to fit wider footrests, and there is so much on offer for the GS that it is difficult to decide on a product
@gsd32i4 ай бұрын
All I can say is that having fitted them and just ridden to town and back, slow traffic and some fast work, standing up etc...day and night difference which I wasn't expecting. Wouldn't go back to the stock ones now.
@alecboyle98374 ай бұрын
Hi, How do they compare to the lone rider Motopegs ones, if you have looked at them ?
@gsd32i4 ай бұрын
Really like the sw motech pegs, TBH I haven't seen the lone rider ones.
@alecboyle98374 ай бұрын
@@gsd32i might be good to review them too as they have the ability to rotate and shift up and down when you are standing, off-roading... I am balancing between the 2 :-)
@gsd32i4 ай бұрын
@@alecboyle9837 I would if they would send me a set to try. I don't do off road so the Evo's should be more than adequate and so far a very good.
@nigehaworth4 ай бұрын
Anyone with a Rallye version of the GS that fits these SW Motech foot-pegs needs to get a replacement spring ( standard GS footpegs spring) for the right hand side, the original spring on the Rallye footrests is not suitable and offers almost no resistance with these SW Motech footrests. I know from experience - there’s nothing to warn you in the instructions!
@gsd32i4 ай бұрын
Thanks for the information . Really pleased with mine , huge difference.👍
@ward58892 ай бұрын
thanks for the heads up 👍
@sayithigher2 ай бұрын
Very nice but your dog still isn't impressed
@gsd32i2 ай бұрын
Indeed they are not 😂But the foot pegs are great 👍