Just a simple video on teaching you how to suck eggs.. errmm I mean change the wheels on your HyperMotard. Music from #Uppbeat (free for Creators!): uppbeat.io/t/zayner/babel License code: HXHVBHYXQKIRQWCV
Пікірлер: 67
@ChasingTenths Жыл бұрын
Nicely done that mate, made it look easy
@hypermotardking Жыл бұрын
Thanks .. 👍🏻👍🏻
@garyhutson6361 Жыл бұрын
Beautiful job. 👍🏼
@hypermotardking Жыл бұрын
Cheers.. 🤛🏼🤛🏼
@peterballard Жыл бұрын
You know what? This is a bloody good video. Nice one. 👍🏽
@hypermotardking Жыл бұрын
Thanks mate.. appreciste it 🤛🏼🤛🏼
@mzk6550 Жыл бұрын
WOW... Very nice!!!
@hypermotardking Жыл бұрын
Thanks..
@salin9964 Жыл бұрын
4:47 OUCH ! My heart dropped
@hypermotardking Жыл бұрын
The spacer or the chewed up Titanium wheel bolt 😭😭
@salin9964 Жыл бұрын
@@hypermotardking the way you hit the wheel
@mrkang4080 Жыл бұрын
Still following even though I sold my hyper... this thing is looking dope bro, good work.
@hypermotardking Жыл бұрын
No way man.. though mt you had plans for it 😭😭
@mrkang4080 Жыл бұрын
@@hypermotardking I had plans for it, but I ended up selling all my bikes this passed month. Unfortunately, I have developed a vision problem over the past year. I get double vision, and it makes track days and any kind of "spirited" riding dangerous, so all the sport/hooligan bikes are gone... to be replaced with a Multistrada. I did keep my cafe racers, so the garage still looks good :) Ride safe bro! Looking forward to seeing the updates.
@hypermotardking Жыл бұрын
@@mrkang4080 Ahh shit man.. Multi is a cracking bike - hoping to get a ride out on a PP version soon..👍🏻
@BHPUK6 ай бұрын
Great video & those OZ wheels 🤟
@hypermotardking6 ай бұрын
Thanks… 👍🏻👍🏻
@gaz-gemw5801 Жыл бұрын
Still my favourite bike and always will be, have a great day. 😊😊😊😊👍🏻
@hypermotardking Жыл бұрын
Thanks.. No.1 Supporter 🤛🏼🤛🏼
@daytonasayswhat93336 ай бұрын
Me too.
@bakedbeanzontoast9078 Жыл бұрын
Luuurve those wheels, not a criticism but an observation, when I swap out front pads I smear a bit of copper grease on the backing plate and use a bit of blue thread lock on the caliper bolts. Great vid, the bile looks mint well done.👍👍👍👍👍👍👍👍🇬🇧🇬🇧
@hypermotardking Жыл бұрын
Good observation and valid points to mention..
@tiodoud Жыл бұрын
Ducati says grease on those bolts, no Loctite, and if they are titanium as i suspect, grease is absolutely necessary.
@daytonasayswhat93336 ай бұрын
Depends how often you have to take them on and off.
@MrMotopov Жыл бұрын
Making it easy!! I need a torque wrench for the wheel tighten specs. Do you tighten to spec usually or feel?
@hypermotardking Жыл бұрын
Tighten to feel.. but when it comes back from Ducati after a service they are so much tighter 😭
@legendconor Жыл бұрын
Best hyper going. Would have liked the torque figures for each bolt but great video!
@hypermotardking Жыл бұрын
Thanks.. im a bit shit working out how to use a torque wrench 😭😭
@martinho97814 ай бұрын
which are those collectors for the exhaust? they look dope
@hypermotardking4 ай бұрын
Its the VanDemon full Ti system 👍🏻👍🏻
@ErChipoliniАй бұрын
That backwheel nut is not a standard one is it? Mine is standard so do you know if I need a regular 46 axle nut?
@hypermotardkingАй бұрын
Standard 46mm shud be ok.. i have a Bi-hex 46mm to use on the AEM titanium axle nuts
@grahamtricker4103 Жыл бұрын
Apart from the bling factor did you notice any difference riding the bike with the new wheels? Very nice wheels BTW
@hypermotardking Жыл бұрын
Its a few hundred grans lighter.. no really difference on the road.. I got a few trackdays comong up so will see then 👍🏻👍🏻
@patthonsirilim5739 Жыл бұрын
@@hypermotardking its really maginal the stock sp wheels are already forge wheels i think going carbon would have been a better step up im sure if it was a stock hypermotard it would have been nnoticably better.
@hypermotardking Жыл бұрын
@@patthonsirilim5739 true.. its marginal - carbon on uk roads would be destroyed 😂😭
@signore-solomonare1818 Жыл бұрын
What about the marchesini wheels set, do you have for sale?
@hypermotardking Жыл бұрын
No.. i keep both wheels and run 2 different sets of tyres depending on weather conditions
@THEASPASPEUR Жыл бұрын
Full options this HM 👍
@hypermotardking Жыл бұрын
🤛🏼🤛🏼
@theperipateticgumshoe9047 Жыл бұрын
Did you ever do a vid on how to remove the servo?
@hypermotardking Жыл бұрын
It was done as part of the full exhaust install.. the wires goes back under the seat to remove the servo..
@theperipateticgumshoe9047 Жыл бұрын
@@hypermotardking Oh I see it. That looks like a huge pain in the butt to remove.
@hypermotardking Жыл бұрын
@@theperipateticgumshoe9047 the full exhaust is yes.. the servo is behind the rearset so a little awkward
@ricardoespiritu884311 ай бұрын
Hi, new hypermotard owner here. I recently had an accident and i need to repace my front rim, do you know whats the hub size on the front wheel of the hypermotard? Many thanks.
@hypermotardking11 ай бұрын
Most ducati front wheel size are the same 3.5x17.. most will be compatible even with a spacer/bearing
@ricardoespiritu884311 ай бұрын
@@hypermotardking thanks a lot!!! Now I can see if the panigale wheel that I saw is still available. Many thanks.
@hypermotardking11 ай бұрын
@@ricardoespiritu8843 Should be fine.. but use your brake discs for a Hyper on the Pani wheel 👍🏻
@ricardoespiritu884311 ай бұрын
@@hypermotardking yeah that's what I was planning to do, imma schedule the appointment with my mechanic, dude you're a life saver 🙌
@hypermotardking11 ай бұрын
@@ricardoespiritu8843 no worries 👍🏻
@zxgopher Жыл бұрын
Get some bungees and hang your calliper from the bars, keeps the out the way and stops them bashing the wheel
@hypermotardking Жыл бұрын
Good point.. they can swap about a bit and easily chip the wheel 👍🏻👍🏻
@joctancarmona2963Ай бұрын
i need those service standss
@hypermotardkingАй бұрын
Constands centre stand and any normal front paddock stand
@joctancarmona2963Ай бұрын
@@hypermotardking got it mate thanks to you i bought mine and is amazing so far already 2 crashes in 2 weeks
@hypermotardkingАй бұрын
@@joctancarmona2963 😂😂 if you not crashing you not riding
@joctancarmona2963Ай бұрын
@@hypermotardking well thanks to your videos i can replace everything i broke already 😂😂😂
@joctancarmona2963Ай бұрын
@@hypermotardking what is that on the top oh the gas cap?
@camaro15z28 Жыл бұрын
what stands are you using
@hypermotardking Жыл бұрын
Constands centre stand and any normal front paddock stand with under fork lifters
@Ramon51650 Жыл бұрын
AHhhhhhhhhhh........bike porn at its finest! Even the music is seductive! This is proper instructional tutorial because it moves at a measured pace where it's easy to distinguish the steps. I eventually want to become confident and proficient enough where I can switch out wheels an rubber to suit the environment. I'm currently in fractured bits and pieces,but I want to be independent and proficient around my bike. Immediately after watching your OZ wheels video, I ordered a set. As it turns out, I REALLY want a set of their covers - I'm a neat-freak. Their claim is that they do not ship to where you already know I live; can you rustle up a solution????? I'm the sort who aligns the screwdriver racks everynight before lights out. This project is going to cost double because of the accident damage - very discouraging.........deep depression stuff. I'm confined to hospice care 😰😥🏯🏁
@hypermotardking Жыл бұрын
Don’t worry about the wheel covers.. I’m sure I can sort something out - you just put your energy into getting better and recovering at your own pace.. bikes are replaceable, humans aren’t #yougotthis 🤛🏼
@Ramon51650 Жыл бұрын
@@hypermotardking I SINCERELY appreciate the encouragement!!!!!!!