How To Test Your MAF (Mass Air Flow Sensor) & HOW to Find A Vacuum Leak

Test Your Mass Air Flow Sensor, also we share how to find A Vacuum Leak. See where we found our leak, it will surprise you!
ALERT**** Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd...
We Guarantee you will love it.
***********************************************
If you would like to help us out.
www.paypal.me/...
***********************************************
USA:
OBD Scanner amzn.to/2rjAPfo
Carb Cleaner amzn.to/2IbaUkt
Mass Air Flow sensor cleaner amzn.to/3qzQ969
Fuel Injectors amzn.to/2FDEQ3H
MAP amzn.to/2FFAg4H
Venom amzn.to/2B8kLBh
_____________________________________
UK TOOLS:
Scanner amzn.to/2JNIZEu
Carb Cleaner amzn.to/2HSEQig
Petrol Injectors amzn.to/2HNHqpn
Mass Air Flow Sensor amzn.to/2rgRLDe
Venom amzn.to/2I35V3a
_____________________________________
Germany Tools:
OBD Scanner amzn.to/2HR093J
Carb Cleaner amzn.to/2rjxInV
Mass Air Flow Sensor amzn.to/2FEK1Am
Venom amzn.to/2nSJZi4
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZbin channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

[@trustmebro8500]

You’re a badass, Thanks for the video it was really helpful diagnosing my Ford fiesta can’t thank you enough. I wish I had a dad like you!

[@SweetProjectCars]

Awesome!! Glad we could help! Thank you so much for watching and sharing your stupendous results, we really appreciate it, hope you have a fantastic weekend my friend. mad Mike the hammer SPC

[@spozz6633]

Thank you for showing this video Sweet Project Cars. I also experienced the same thing last year but did not know why it happened and continued to send it to the mechanics. The mechanics say that the fuel injector needs to be changed but does not look like new. and now after being shown by Sweet Project Cars it will save my money in the future if the same thing happens. Thank you very much Sweet Project Cars....the best teacher here...millions thumbs up

[@SweetProjectCars]

Spozz. Thank you very much we know we mix are videos up a lot but we’re giving all our good subscribers like yourself have a great archive of information so you’ll never have to pay anybody to do anything on their car again have a great night my friend.

[@CycloneCyd]

Many years ago my Grandfather used to use a plumbers soldering torch (unlit!) to find vacuum leaks. A very gentle flow of butane and the engine would suck it in a leak and usually raise the revs. I've also used a can of lighter fluid!! Not the safest of methods, lol!! Great video as always.

[@SweetProjectCars]

Cyclone Cyd thanks for sharing this my friend :) have a great day

[@thearrow5793]

Hi .there ......I have same problem last month ..it was air flow sensor I clean it and it’s raining good .....thank god....thank you man......

[@SweetProjectCars]

The Arrow great to hear that it was just dirty :) thank you very much, my good friend, if you can share our channel that would be awesome as we want to get the word out to the world that good people like you can DIY on most all the issues they have with their cars and trucks :)

[@andylong2239]

Another helpful video! Sound advise on finding something that can be very frustrating without videos like this to find the proper culprit. Keep on posting!

[@SweetProjectCars]

Andy Long thank you so much, and all of us here at SPC's thank you very much for being here, if you could do us a favor and *Share Our Channel Everywhere You Can,* that would be awesome as we want to get the word out to the world that good people like you can DIY on most all the issues they have with their cars and trucks :)

[@SweetProjectCars]

Hello my good friends, This video will hopefully help you test your MAF Sensor and how to help you locate a vacuum leak. We found that with a little time you can save yourself a boatload of money doing this work by yourself. Have a great day :)

[@edsmith5873]

OMG!! I seem to have learned something new again,,DAMN you can teach an old dog new tricks!!! Thanks spc! Awesome as always 😎

[@vidsforsquids]

Sweet Project Cars Hey SPC! Can you show us how to get rid the oil and fluid leaks that our friend’s car left in our driveway???? It’s a problem !!! Thanks!!! 😊

[@SweetProjectCars]

Ed Smith you are very welcome my friend :) glad we could help

[@timareskog2418]

Thank you for another great "no bulldust" & straight to the point video. It's so easy to get caught up searching in the wrong direction when fault finding on modern engines, that we often overlook the most obvious and easiest things to check first that could easily be causing the problem.

[@SweetProjectCars]

Tim Areskog you nailed it my friend :)

[@christopherloureiro6197]

I just spent around $380 for Diag. and part ($155) for my V8 5.3 repair today, but it was not throwing a P0101 but instead a P0300; so this is a good video to watch.

[@SweetProjectCars]

Christopher thank you very much Mike

[@lega78]

Your video is very easy to understand and to follow instructions. I have the same problem with 2013 Ford Edge. I'll let you know the outcome. Thanks so much!

[@SweetProjectCars]

Glad we could help! Thank you for watching and sharing, have a great day and all the best on your project my friend. mad Mike the hammer SPC

[@Ottonic6]

When I replace something like my injectors I try to go OEM which will run way over $100.00 for all 4, so knowing the injectors themselves were good, what I did was get a kit with all the seals, o-rings and on mine, new screens. Worked like a charm for under $50.00. A lot of times especially when someone has messed with them before they don;t take special care when installing them and pinch the seal (like on yours) which will end up with a fail. Another great video... Always a big THANK YOU!

[@SweetProjectCars]

Dano thank you so much for sharing my friend great information like that helps everyone have a great night my friend

[@auntbarbara5576]

Aunt Barbara adores you!! 😚

[@edwinferreras4820]

One more very informative video. Thanks SPC. Keep up the good work. More and more power to you. 💪😎👍🏼

[@SweetProjectCars]

Thank you Edwin we truly appreciate it if you could share our channel anywhere and everywhere we truly appreciate that as well have a great night my friend

[@jimbola77]

Thank you Boss for sharing!!!!! Love all your work never once went wrong that aero space 303 is Awesome!!!! iv'e blown peole's mind's with that stuff.

[@SweetProjectCars]

jimbola77 that's awesome :) to hear...we try to share many different videos to cover many areas of DIY. and 303 rocks for sure

[@Fidz27013]

I have replaced my maf/map sensors twice/throttle body and sensor/air filter/alternator and I still am getting code P0101 please help what I should do?? 2014 Chevy traverse..it goes in low engine mode and I can’t drive over 20 mph..so idk why I keep getting this code and I have changed everything..should I do what u did in this video?

[@SweetProjectCars]

Your other issues you may have with that code are 1. a vacuum leak 2. a problem with your intake manifold, it could have a small crack in it 3. a clogged or dirty air filter 4. wiring connections to your maf aren't good. Check everything that you can check and if it still does this, you probably have a broken wire of some sort. You may end up taking it to a certified repair facility my friend. Thanks for watching and asking, have a great week and all the best on your project. mad Mike & team

[@themanrecon6652]

Another great informative video my friend..it's gona suck when you retire we all here at your channel learned so much,thx for sharing....Karl

[@SweetProjectCars]

THE MAN RECON thank you and I am only retiring from the detailing BIZ...not the sharing of the videos I have hundreds to do yet and all of us here at SPC's thank you very much for being here, if you could do us a favor and *Share Our Channel Everywhere You Can,* that would be awesome as we want to get the word out to the world that good people like you can DIY on most all the issues they have with their cars and trucks :)

[@gradyleger1306]

What was the issue you were having with your car, the issue I'm having is my truck starts but takes a few seconds crank I'm thinking fuel pressure is bleeding off through the injectors via a bad seal. I changed the mass airflow sensor truck ones better but still have the cranking issue. Awesome video by the way thank you very much!

[@SweetProjectCars]

Sounds like either your injector controller has taken a dump or your fuel pump has taken a dump or your injectors all decided to not do their job at the same time. These are the 3 things that are most likely the culprit, one or all of them. Thank you for watching and sharing, have a great week and all the best on your project my friend. mad Mike

[@HtMnBrusso]

I don’t think disconnecting the MAF and car continuing to run necessarily indicates the MAF is faulty.

[@slewfoot6608]

Why not. Whats you technique?

[@falcorthewonderdog2758]

Yeah that diag will bite you in the butt.

[@falcorthewonderdog2758]

@@slewfoot6608 you need to understand the maf sensor reads air flow. A good maf will display 1 gram per sec air flow for each liter engine size. 8.1 liter V8 draws 8.1 grams per sec at idle.

[@shinola228]

@@falcorthewonderdog2758 Thank you for posting that - l was hoping there was some simple formula.

[@l3oki668]

100% i took mine off while it was running, and ofcourse the car kept running. I automatically assumed its faulty and was gonna buy a new one for over 100 $ untill I looked around and followed my breather hose to find out there was a huge hole at the end of the hose stacked right behind the engine where it was hard to see.

[@22_floW]

I once had a lean on bank whatever error with my 2006 Chevy Colorado with nothing in the codes about my MAF functionality and it turned out to be a bad O2 sensor. Just goes to show how these little tricks and a decent understanding of how you can disconnect stuff or spray things in certain places goes an awful long way to diagnose something. Of course, having a $500.xx set of service manuals always helps, too! (Something I thankfully bought for both my truck and my 2008 Saturn Sky Redline.) Thanks for the video.

[@SweetProjectCars]

Wolf thank you very much for sharing and you’re very correct in your comment thanks SPC Mike

[@ahsamahi4385]

This is valuable video thanks for the idea how to find air leaks by carb cleaner and for the idea that air leaks could be from the injectors, so thumbs up for you

[@BruceLyeg]

Another great video. You're one of the best automotive resources on KZbin. I've said it before but it needs to be said again, I've been a mechanic for 30 years and still learn a trick or two from your channel. Thanks!

[@SweetProjectCars]

Bruce we truly appreciate that specially from a mechanic with your experience if you could share our channel anywhere and everywhere we truly appreciate it as well have a great day my friend

[@BruceLyeg]

Will do. You have a great day too.

[@SweetProjectCars]

Bruce L. thank so much :)

[@STREAMGR]

i drove my dodge caliber with MAF sensor unplugged sor about an hour :D im going to change it, for about one year im receiving p0172 error and had no idea what is it havechanged the half of the engine electronic oparts lol... Thankssss

[@SweetProjectCars]

Thank you for watching and sharing, have a great day my friend. mad Mike the hammer SPC

[@friendofvinnie]

Your the man!

[@SweetProjectCars]

Thank you very much, appreciate the view and comment my friend. Have a great day. mad Mike the hammer SPC

[@freesoul9324]

You make it simple and correct.. as usual. Your 13000 mile away fan :)

[@SweetProjectCars]

Free Soul thank you free soul, we appreciate that and are extremely glad you are here with us :)

[@davey4808]

Mine keeps running thank you so much

[@SweetProjectCars]

You're welcome! Have a great day, thanks for being here with us! mad Mike the hammer SPC

[@konstantinusstoyanov9749]

Thank you for sharing your experience

[@jeanfrancois777]

i'm curious,why if you unplug the MAF and the car keep running or not it tell you is bad or not?the MAF isnt acting with the car anymore ... i wonder since i have a 2004 volvo v70 r having idle issue and very high consumption fuel,i have 2 obdii code "p0507 and p2187" and i believe is my MaFsensor, i have change all vacuum line and do spray test on manifold,injector etc with out any effect and if i unplug the mass air flow the car keep running but very ba,confirm probly your point ,but just wondering why lol , thanks you nice video btw

[@SweetProjectCars]

ratselop best thing you can do in your situation is to replace the MAF then you will know for sure also run a really good injector cleaner like this amzn.to/2qI4RNB

[@tredfxman]

Very interesting! I got the Turbo/Supercharger Overboost Condition error OBD Eleven fault code: P023400 on a 6 year old VW GTI Clubsport. Wonder how common those sealing issues on spark plugs are.. I will save this video! 👍

[@SweetProjectCars]

Thank you for watching and sharing 3DFX, glad we could help, have a fantastic day my friend. mad Mike the hammer SPC

[@asmarwash8874]

I have a 2013 nissan altima 2.5, it starts but cuts off when put into gear. Got the 102 , 101 code. Replaced mass air flow sensor but still cuts off

[@SweetProjectCars]

Well you are in a position where you are going to have to anti up and take it into a reputable repair facility. Sorry buddy. Have a great day. mad Mike the hammer SpC

[@halseyballistic]

Awesome discovery and method of finding the leak.

[@SweetProjectCars]

Halsey thank you very much for that my very good friend :)

[@FealtyThoughts]

Hi I just got a P0106 on my Hrundai Elantra 2012. Says its a MAP sensor fault on my OBD2. I am very thankful for your video and would like to try the spray test. I was wondering, what did you spray the parts with? Hahaha nvm I just saw the text pop up of carb cleaner. Thank you for the video I am going to get some of that tomorrow!

[@SweetProjectCars]

Awesome! Glad we could help! Thank you for the view and comment, hope you have a great week and all the best on your project my friend. mad Mike & team

[@gerlandkent6377]

Thank, you for you're helpful video

[@SweetProjectCars]

Happy to help Gerland! Thank you for watching and commenting, hope you have a great rest of your week my friend. mad Mike the hammer SPC

[@gerlandkent6377]

Thank, you

[@tajhealthnature8570]

So i jave a 2007 uplander.. Same Code..i pul the..air sensor off..car still running is the sensor bad..please

[@amana1480]

1:17 When my MAF is connected, the car idles OK (no check engine light). When I disconnect the MAF from my petrol car, the engine idles rough (but does not stall), and the check engine light comes on. What does this mean?

[@SweetProjectCars]

Aman A i would run the codes on this and see what it says my friend

[@yb2112]

Good job sir

[@SweetProjectCars]

Glad you think so Y B! Thank you so much for watching, hope you have a fantastic week my friend. mad Mike the hammer SPC

[@michaelsalgado4472]

How could one possibly clean the MAF sensor,"....meaning to clear the engine check light....? Will I have a difficult time without fixing this MAF sensor sooner than later?

[@SweetProjectCars]

See our update here kzbin.info/www/bejne/eJDNnJijjat_odU it's exactly what you are looking for Michael. Thanks for watching and asking, sorry for the delay in responding, have a great week my friend. mad Mike

[@lightningsurvivor1432]

Its not throwing a code but when i pull the maf plug it stays running. This is after installing a brand new one. Wondering if the plug is bad

[@damonwilliamson186]

brother man what about if its happening right behind a short ram air intake upgrade on a 2011 malibu 4 cylinder?!?! HELPPPPPP!!!!

[@SweetProjectCars]

First thing you need to do is get your computer set back to default, do this, remove both battery cables and let it sit for 24 hrs. Reconnect it then drive 10 miles or so, if that doesn't do it then you need to get one of these amzn.to/3Ca2QeD and find out what the problem is. Usually if you do an air intake upgrade you will lean the system out, thats what we have found. Hope this helps Damon, thanks for watching and asking, Happy New Year and all the best on your project my friend. mad Mike the hammer SPC

[@alansanchez-cp5lx]

If it was a vacuum leak wouldn’t the check engine light stay on all the time? Having this issue with an 04 silverado 5.3 with intermittent check engine light and threw maf code… but had a buddy with a vacuum leak on his same model truck and his engine light stayed on all the time… he was diagnosed with a vacuum leak… verdict? Do i have a bad maf sensor or vacuum leak?

[@SweetProjectCars]

When you get the check engine light, check the codes at that time, that's how you will be able to tell alan. Hope this helps, thanks for watching and asking, have a great day and all the best on your project my friend. mad Mike the hammer SPC

[@antwana6288]

Just because the engine quits after unplugging mAF sensor, doesn’t mean the Sensor is free from fault. Best method is a scan tool and Repair manual

[@SweetProjectCars]

We've found this method one of many to fix the issue, have a great day. mad Mike & team

[@reembright4231]

So I had a check engine light on b4 for my 02 sensor which I replaced and it went off but it’s still stuttering when I drive , I unplugged the maf sensor and it still ran so that’s the problem ? Even tho there’s no engine light for it ?

[@SweetProjectCars]

Do this video kzbin.info/www/bejne/aKasiZKCg7yriLs before you do anything else so you can get your system back to default, then we will go from there. Thanks for watching and asking, have a great day. mad Mike the hammer SPC

[@musicfashionstyle4251]

Can you tell me why. I already changed new mass air flow sensor on my car and I drive around 20-30 minutes. But the check engine light it's still on.

[@SweetProjectCars]

Try this, disconnect both battery cables, let it sit overnight. Clean the posts and the terminals well before re-installing. If it comes back on get one of these amzn.to/3jwL8f1 it will tell you exactly what the problem is. Thank you for watching and asking, have a great week my friend. Happy New Year! mad Mike the hammer SPC

[@GrantRTanner]

very helpful video! inspector gadget woohooo!

[@Abdullah-hc1cz]

hello i have question..please help me SPC..i have scanner that read zero gram per second on MAF sensor in my car..can u tell whats wrong?

[@SweetProjectCars]

Well for the cost of an MAF these days, it's best to just replace it. Thanks for watching and asking Abdullah, have a great day. mad Mike the hammer SPC

[@marktodd5646]

I had signal to MAF, cheaked all wiring, it was the Ecu

[@SweetProjectCars]

glad you found the issue Mark

[@chelle315]

Wow! What am impressive diagnosis!! My hubby and I just changed the injectors on our 3.5L Maxima.... You're absolutely right....Those seals do get hard.

[@SweetProjectCars]

Thank you very much, Rochelle! We appreciate the view and comment, have a fantastic weekend. mad Mike the hammer SPC

[@andrewrobinson2869]

Do you know a cheap scanner that uses the mut2 protocol as my old Pajero does not work on obd2 scanners , no one seems to be able to help. I oam on a disability pension so money is a issue as you could understand, can you help me, regards Andy Perth Australia

[@SweetProjectCars]

Hello Andy, there's nothing inexpensive for your needs, most of the one's we know of are between 500 to 1,200 dollars, your best bet is to take it to a dealership have them give you the diagnosis and then fix it yourself if possible. Hope this helps, thank you for watching and asking, have a great week and all the best on your project my friend. mad Mike the hammer SPC

[@Scoopy4444]

Thank you very much!

[@SweetProjectCars]

You are very welcome my friend thank you so much for being here with us have a great night

[@michaelvalone907]

Great video! Did you change the fuel injectors? Will this trick work in every car or just some?

[@SweetProjectCars]

Michael Valone yes we installed new injectors and the problem was solved, vac leak gone...this method works on most all cars and trucks my good friend :)

[@mariotafa-ij6gi]

Is this MAF test 100% sure? And for all car models? I have MB with M271 engine ,P0171 code

[@SweetProjectCars]

It works for all of them we have used them on, give it a shot, sounds like you've got nothing to lose my friend. Thanks for watching, have a great day Mario. mad Mike the hammer SPC

[@RiceARonia]

What if when I pull out the MAF sensor sometimes my car stops and sometimes it keeps running? Could it still be an issue. I have no check engine light on, but my car will randomly die at stop lights and will start back up as soon as I put the car in park and crank the key. Would appreciate any help. Love the vids btw!

[@SweetProjectCars]

Sounds like your mass airflow sensor is starting to go I would replace that and then I would check all the wires and connections on the female part of the plug-in hope this helps

[@chrismasters7373]

In the end the only problem was the injectors seals and not the intake manifold or his gasket, right?

[@SweetProjectCars]

Yes, Chris, it was the seals you are correct on that. Thanks for watching, we really appreciate it, have a great weekend. mad Mike the hammer SPC

[@MrEyad1990]

Great idea .

[@SweetProjectCars]

EA Jam thank you so much, and all of us here at SPC's thank you very much for being here, if you could do us a favor and *Share Our Channel Everywhere You Can,* that would be awesome as we want to get the word out to the world that good people like you can DIY on most all the issues they have with their cars and trucks :)

[@christophertapkins7515]

This is a nightmare to do if your intake manifold is blocking everything 😧

[@SweetProjectCars]

You are correct Christopher some vehicles are very tough to get to the injectors and all we can say is pray that it is not your intake or intake gaskets that job is not fond of a great night my friend

[@chestertillson4819]

is that true for all maf shuts off good stay running bad

[@SweetProjectCars]

for the 100's we have tested it does but it may not for some of the more off the wall models

[@waynewoodrick5055]

great info, I have used this trick myself a few times. Sweet Project Cars needs a TV show

[@SweetProjectCars]

Thank you Wayne we truly appreciate that my friend it means more to us than you know if you could do us a favor and share our channel anywhere and everywhere that would be awesome

[@marks7352]

Great teaching... Thanks teacher. I'm your next subscriber

[@SweetProjectCars]

thanks Mark glad to have you

[@kylemartin4010]

Sorry, what are you spraying? I rewound five times but you never say what it is...?

[@SweetProjectCars]

Use this to test to see if there is a leak amzn.to/2IbaUkt then use this for cleaning your MAF amzn.to/3qzQ969 and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@zarikparsanian3940]

You fixed the obvious problem but you didn't verify the repair by looking at the readiness monitors being ready along with mode 6 data to confidently say it is fixed for sure.

[@SweetProjectCars]

It was fixed, the car ran like it was brand new check engine light never came back on car has never run better customer was ecstatic even gave us a tip they thought they were driving a new car they said that’s all we really need to know and that’s all the do it yourself really has and needs Video was about helping them find issues and just more knowledge for their memory bank have a great night

[@oldschooldude8370]

@Zarik Parsanian Did you not see those injector o-rings? The motor damn near stalled out spraying brake/carb cleaner on the one. Pretty obvious what the problem was.

[@SweetProjectCars]

Oldschool Dude you are very correct it was as plain as day the bad seals, that is where it was coding from...thanks for backing us my friend

[@cubanhack3r]

Hey buddy! Ss always great channel!!! I have a question for you if u can possible help. I have a code for the same thing. I removed the sensor harness as u showed here and the car kept on running like it wanted to turn off but it didnt go off. Does that mean i need a new mass air flow sensor?

[@SweetProjectCars]

Jose that is a great indication you need a new mass airflow sensor hope this helps my friend have a great night

[@cubanhack3r]

Thank you thank you! Keep rocking with your channel man :)!!!

[@SweetProjectCars]

you are very welcome :)

[@masterofnone7846]

Thought disconnecting maf sensor doesn't always work,?

[@SweetProjectCars]

When you are working on cars my friend, you try anything and everything ruling out every possible situation that can be causing you problems. Follow the video, if it doesn't work, try something else. Thanks. mad Mike the hammer SPC

[@auntbarbara5576]

My sir you are truly a good mechanic. You went straight to the problem with common sense and no drama. You saved the owner of this '07-ish Yaris a lot of diag & money!!

[@SweetProjectCars]

Thank you very much, it's our pleasure to help. Thanks for watching and sharing, have a great day. mad Mike the hammer SPC

[@TrustTheProcessKB]

With my mass airflow sensor plugged up my truck won't idle it cuts off but unplugged it idles fine. Running rough what could be wrong?

[@SweetProjectCars]

The first thing I would do is replace the sensor if you are not pulling any codes. Thanks for watching and asking, have a great week. mad Mike the hammer SPC

[@TrustTheProcessKB]

@@SweetProjectCars I've replaced the Mass airflow sensor twice so far. Maybe they both were bad?

[@briandeines5019]

Thank you for your knowledge. 06' C/K 2500HD . I replaced the Mass Air Flow Sensor with one from Auto Zone and cleared the codes, no more MIL . Today it came back. I unplugged it and the idle changed but it kept running. what do you think I should do?

[@SweetProjectCars]

I would say you need one of these amzn.to/3PBL9ur with 10% OFF CODE :T9BRFI99 Plug this in and it will tell you exactly what you need to do Brian. It's way more economical than going to a repair shop my friend. Thanks for watching and asking, have a great week and all the best on your project. mad Mike

[@HUBBABUBBADOOPYDOOP]

Always silicone paste all O-rings. Press & twist connections together. When in doubt of age, or if over 6 months old- never reuse O-rings. A spray bottle of plain water is safer, and just as effective- to help find vacuum leaks.

[@SweetProjectCars]

HUBBABUBBA DOOPYDOOP thank you so much for sharing, and all of us here at SPC's thank you very much for being here, if you could do us a favor and *Share Our Channel Everywhere You Can,* that would be awesome as we want to get the word out to the world that good people like you can DIY on most all the issues they have with their cars and trucks :)

[@zcadn]

wont carb cleaner conpletely dry up anything plastic or rubber like those vacuum lines

[@SweetProjectCars]

No, carb cleaner is made for carbs and they have rubber & plastic lines on them, it's perfectly safe. Thanks for watching, have a great day. mad Mike & team

[@zcadn]

@@SweetProjectCars it has acetone in it, try to clean anything plastic and it will start to melt

[@habibpallath]

Hi.. Thanks for the video.. I have a touareg vw 2006 model has p0102 code and tcs light came on..thevair bag light also was flashing sometimes since long time..Replaced maf sensor.. It was fine for a half hour journey.. Tcs also went away..after hslf hour tcs light came on and scanned by odb2..code getting now p0101..totally confused.. Checked air filter snd hoses everything fine..intake manifold was removed once a time replace the head cover gasket.. It is fine fitted by looking..no leaks found anywhere.. I guess while code p0102 got i was got a misfire cilynder 1 and after multiple.. Do i removed out the spark plugs outvand checked one plug was little bent its metal rode where the spark occurs..removed out all plugs and coils..cleaned all with petrol and the bent plugs adjusted spark gap's and installed back andvsame time replaced maf sensor also.. After i am gettimg p0101 code.. Do uou have any idea about it..? It spatk plugs or coils damaged due to cleaning by petrol.? Is this bad coils or plugs cause this code..? I have a sudden or lazy pick ups sometimes while driving..gear shifting also not smooth sometimes.. But when clearing codes its runs fine for a hslf hour..after Tcs is on.. Air bag is also flashing some times....i am totally confused what to do.. Kind uour help please.. I am an Indian from Kuwait..

[@SweetProjectCars]

If you didn't replace all of your coils, now is the time to do so. Once you've done that start the car up and spray the top of the engine while it's running close to the intake and fuel injectors with this amzn.to/3ZH0X2q to see if you have a vacuum leak the engine rpm's will pick up if there's a vacuum leak, you need to spray around until you find which area is leaking. The other thing to do is this kzbin.info/www/bejne/aKasiZKCg7yriLs for no less than 24 hrs. longer if you can. Thanks for watching and asking, have a great day and all the best on your project my friend. mad Mike the hammer SPC

[@utuber2940]

great video you guys cut to the chase no b.s glad im a subscriber.............

[@SweetProjectCars]

u tuber thank you so much, and all of us here at SPC's thank you very much for being here, if you could do us a favor and *Share Our Channel Everywhere You Can,* that would be awesome as we want to get the word out to the world that good people like you can DIY on most all the issues they have with their cars and trucks :)

[@MuhammadShahbaz-hv9bm]

Hi, i have honda 8th gen 1.8L and short term fuel trim at ideal position -16% to - 10% LTFR 0% and fuel consumption only 7km per liter. My cat is TOTALY blank inside (all material which was in exusat weast though exusat but both o2 sensor intact. Is it due to expired cat?

[@SweetProjectCars]

Yes you should replace the catalytic converter

[@gee620]

What kind of spray are you using?

[@SweetProjectCars]

We use this amzn.to/3qzQ969 Thanks for watching, we appreciate it Go Ma. Have a great day. mad Mike the hammer SPC

[@bradvincet1848]

Can you have a vacuum leaks without DTC's? My mileage sucks on my 5.0 f150 and I'm thinking the computer is using more gas with the "extra" air.

[@SweetProjectCars]

You can have a vacuum leak, try this; disconnect your battery, both cables, let the vehicle sit overnight then reconnect the battery this will help the computer re-set back to default. Hope this helps Brad, thank you for watching and asking, have a great day and all the best on your project my friend. mad Mike the hammer SPC

[@Tec2Nut]

I am going out to do this now as I keep getting the same reading , I was going to change my 02 sensor but I'll do this first injectors on a Subaru are a pain to access

[@SweetProjectCars]

Subarus are tough to get to but you have to realize those seals on those injectors take one heck of a beating from the heat down inside there they don’t last very long good luck my friend

[@g.cosper8306]

Martin Gillespie glad to hear the MAF was the problem!

[@Tec2Nut]

Sweet Project Cars will do when putting pink injectors in .

[@SweetProjectCars]

Martin i thought you would say you were going to use the lucky green ones lol have a great day my friend :)

[@Tec2Nut]

Sweet Project Cars The green ones are a bit short 😂🤣😂

[@thejasonkellett]

WATCHING SPC CHANEL HAS ADDED A LOT OF MASS TO MY WALLET!! Thanks a lot guys...this works on carburetor engines like motorcycles as well!

[@SweetProjectCars]

Thank you Tyler you’re right it does work on carburetors and motorcycles have a great night my friend love the pun as well

[@x-man5056]

When you vacuum leak check with Carb Cleaner or other, use the straw on the nozzle. It will help you pinpoint where the spray at the suspected leak source. If you need to extend it, use a piece of clear vinyl tubing. You want the spray source as close as possible to the item you are spraying. The spray will be more dense (spray fans out with distance) and easier to see the exact spot that's leaking that way. If you ever have to change 1 injector seal, change ALL of them.

[@SweetProjectCars]

Thanks for watching and sharing, have a great day. mad Mike & team

[@AllanJ1175]

Nice to see what happens on the newer styles of cars. I happen to be stuck in a time warp with a 1983 AMC Eagle. Yup they did make something like that. And, it has massive vacuum which is a massive problemmmmmm............ Thanks for reading my comment.

[@SweetProjectCars]

The AMC eagle was a vehicle of its own that’s for sure that’s pretty cool you have that thank you for sharing have an awesome day

[@AllanJ1175]

$2383.00 will put her in your driveway :-)

[@Thomas-kh7qk]

I tried this method with maf sensor on my fiesta st 2014, pulled out the maf sensor and cur still runs. I have system too lean bank 1 code and trying to find a solution. Revs go up when idling around 1600 and then down again

[@jrcapulong2928]

what is the problem when i brake may rpm go low idle sometimes engine shout off

[@SweetProjectCars]

Sounds like you have an electrical problem. Brakes, when applied, use a lot of electrical power, you might want to put a volt tester on your battery while the car is running and have someone apply the brakes and make sure you are not dropping below the necessary voltage to keep your car running. This is just one of many, many issues you could have but it sounds like you may be drawing too much power away from your injectors. Hope this helps JR, thanks for watching and asking, have a great day and all the best on your problem my friend. mad Mike the hammer SPC

[@landonhsmith]

I just got done dealing with a P0101 code (MAF). After changing and checking all I could it ended up being a bad battery. I had an Oddsey battery and it had enough power to start the truck but not enough for the “brain” to operate. Swapping the battery solved the problem.

[@SweetProjectCars]

Thank you very much for watching and sharing, we appreciate it my friend. Hope you have a great weekend. mad Mike the hammer SPC

[@manofgodkevin714]

Great video can you do a video with A QG15 ENGINE ❤️❤️❤️❤️

[@SweetProjectCars]

Maybe one day Kevin. Thanks for watching, have a great day. mad Mike the hammer SPC

[@vindieu]

go and try that on my audi :( it's just not doable to pull the injectors off, they come with the intake manifold which is imprisoned by 30 different tubes hoses and crap. it's 3 hours to take off for a seasoned mechanics.

[@SweetProjectCars]

Thank you for watching and sharing vivien. Have a great day. mad Mike the hammer SPC

[@jessicaduclos7597]

Does it have to be carb cleaner? I have some mass airflow sensor cleaner.

[@SweetProjectCars]

You can use whatever you want to use, we are just showing you what we know works after 50 years in the industry. Thanks for watching, have a great day. mad Mike the hammer SPC

[@utuber2940]

you saved 300 to 500 times 2 the mechanic would have shot the parts cannon and still not hit the problem nice method of trouble shooting Thanx ....

[@SweetProjectCars]

tuber glad we can help and glad to hear you are DIY, thats awesome !!!

[@nicholaslynch7651]

They want 89 dollars for an intake hose on a flip I'm doing anybody just make one out of 3.5 inch radiator tube and a 3/4 pvc hose receiver b4?

[@SweetProjectCars]

Thank you for sharing Nicholas we truly appreciate it have a great night

[@dnfwme]

If I pull mine in C230 , rpm go high and then come back to Normal. Mine MAF is very expensive . What you suggest? Thanks

[@SweetProjectCars]

This sounds like you need to take it into a certified repair for Facility to have them take a look at it you’ll most likely end up saving more money doing it that way

[@duposflies2621]

I have a problem with my mass air flow sensor, I tried to clean it up and still the engine light comes up. Then I bought a second hand mass air flow sensor and change the one I have, and my engine runs smoothly no rough idle and no more engine light. When I test to remove the connector while the engine running it didn´t stop so meaning the one I put also bad? I saw also a video here in you tube regarding fulling out the contact while engine running, why my engine still running when I full it out the connector? can anyone explain pls.

[@SweetProjectCars]

ok are you sure it is because of the mass flow and not a 02 sensor?

[@duposflies2621]

@@SweetProjectCars what is the 02 sensor sir? I read from my scanner faulty mass air flow. I don´t know if the MAFS or something else. But now it seems running good no engine lights, I will try again the method disconnecting sometimes. Thanks for your time.

[@SweetProjectCars]

leon if it is running good and the check light it out then you are good to go also if you disconnect your battery both positive and negative cables for 15 minutes and then reconnect then drive for 50 miles or so it will reset your computer back to default.

[@peterswanepoel2807]

Excellent video Very informative audible and extremely helpful One concern IS NOT DANGEROUS TO CARB CLEANER ON A HOT RUNNIG ENGINE????

[@SweetProjectCars]

Start the car then use the carb cleaner while the engine is still cool Peter, thanks. mad Mike the hammer SPC

[@codycheney3401]

do you have a way to clean rubber floors like in mini trucks that didn't have carpet ? how about bed liners ? it can't leave them slippery but also look like new ?

[@SweetProjectCars]

cody my friend we use this to clean all vinyl and rubber as well amzn.to/2zQhnwO mix it 50/50 hot water hope this helps my friend :)

[@hardenstine]

Can you use the 303 protectant on the injector gasket?

[@SweetProjectCars]

Definitely soak those gaskets in your 303 Stephen they will last and last thank you for asking have a great weekend my friend

[@adanarceo4636]

Very good tips Mr, thank you very much for Sharing this 👍👍👍

[@SweetProjectCars]

thank you very much

[@silvergrizzly316]

NOT BAD??? I'm wishin I lived closer to my KZbin mechanic!!!😁,,, Thanks for sharing another GREAT video, my friend! Received my 3M headliner adhesive today can't wait to use it!!! GOD BLESS YOU ALWAYS, Mike.

[@SweetProjectCars]

Hog Man thank you very much and hope you have fun with the headliner project...it is actually quite fun but then again I do it for a living lol, God Bless you as well Jay :)

[@MrHollywood663]

Is it better to use OEM injectors or reman"s??? Can I use TB Intake cleaner to check for vacuum leaks??? If car has dual mass air flow sensors do I have to unplug both???

[@SweetProjectCars]

luis lopez you have many options in parts so we say use what you can afford. most any flammable spray will work for checking leaks,

[@MrHollywood663]

If Car has dual mas air flow sensors do I have to disconnect both??? Thanks!@@SweetProjectCars

[@2bnax]

THAT'S WHY I'M AFRAID OF LAQUER THINNER? IT'LL CAUSE THE SAME PROBLEM DAMAGING THE "O" RINGS

[@amana1480]

1:17 Most diesel engines will continue running with the MAF disconnected...

[@SweetProjectCars]

Aman A you are correct :)

[@ceciliafranceschi768]

I would like to know what spray you used. I am going to try this on my car. I have had mechanics diagnose not really. I will come back with results 💪

[@SweetProjectCars]

We used these Carb Cleaner amzn.to/2IbaUkt & Mass Air Flow sensor cleaner amzn.to/3qzQ969 Thank you for watching Cecilia, have a great week and all the best on your project. mad Mike the hammer SPC

[@jacobperry426]

You may have just solve a 3 year problem with my 2019

[@SweetProjectCars]

Glad we could help jacob!! Thanks for the view and comment, have a fantastic week and all the best on your project. mad Mike the hammer SPC

[@S4_QUATTROPOWER]

What other CRC products can I use instead of the carb cleaner?

[@SweetProjectCars]

you can use this amzn.to/2mhmDFp

[@S4_QUATTROPOWER]

@@SweetProjectCars Thanks! Your the best!

[@SweetProjectCars]

no problem glad to help

[@GTDpowah]

Can you spray carb cleaner onto a diesel engine? I am guessing the engine wouldn't really appreciate it? :/

[@SweetProjectCars]

No you should never do that my friend

[@kellyspann9845]

My 93 Pontiac Grand Am GT with the 3.3L V-6 when put in park will surge from 500 rpm to 1000 rpm but when put in drive it goes away and drives fine until I stop at a stop sign or traffic light then idles rough until I give it gas to go. Sometimes it will stall when I stop like it's not getting enough gas. I cleaned the MAF senor but still does it. Could it be a vacuum leak or maybe some other senor I'm overlooking. Thanks for your help and love your videos.

[@SweetProjectCars]

If it only does it when it's in drive, just leave it in drive LOL. Did you use this amzn.to/3MjGFIu and only this when cleaning your MAF? Also, make sure that your air filter has been replaced. You will also need to use this here amzn.to/3VX5rRT use the whole bottle on half a tank of fuel. We are doing these things to rule out the least expensive problems out of the equation. If doing these things does not take care of your problem, use this amzn.to/3LOiiRO and this will tell you what codes you are pulling up, once you do this let us know what codes you received and we will get you pointed in the right direction Kelly. Thank you for watching and asking, have a great day and all the best on your project my friend. mad Mike the hammer SPC

[@kellyspann9845]

@@SweetProjectCars I will Thank YOU.

[@muanabutawamuanabuta7072]

Hi , is the test working on diesel engin? I follow your instruction on my volvo xc60 2011 witch I got the same fault but in my case: air flow too high, I try to remove the stick on air flow sensor while engin running but the engin still running. then I try to start without connecting air flow sensor and the engin start as well. Should I conclude the failure on air flow sensor?

[@SweetProjectCars]

it just maybe but check with your repair shop first

[@limited50scla]

My OBS 2000 Tahoe limited had the light on. Replaced the vacuum line and I guess that fixed it 🤷🏻‍♂️ Always read Misfire p0305

[@shanehall5659]

Hi, can we use intake cleaner spray to check vacuum leaks just the way you sprayed around the hoses ? Thanks

[@SweetProjectCars]

When you are doing that, you want to use something very potent, this amzn.to/30hfYic is the stuff that will help you find vacuum leaks. Thank you for watching and asking Shane, have a great day my friend and all the best on your project. mad Mike the hammer SPC

[@CITYOFANGELES1343]

I have a 93 Toyota pickup with a air flow meter. Is it the same method as with the MAF sensor?

[@SweetProjectCars]

Should be the same method with every vehicle that has a mass airflow sensor

[@alfonsocamacho2234]

Hey man... I had a bad injector I changed all eight injectors on my 2001 expedition and now I have codes p0132 and p0152... I changed the mass flow sensor, cleaned the throttle body and I still have both codes, also there black smoke a (little) coming out when there was none before the bad injector... Any ideas will be greatly appreciated... Thanks....!

[@SweetProjectCars]

Alfonso, first thing you need to do is disconnect both battery cables for 15 minutes. Then re-connect, and drive the vehicle a mile or two. If it still does it at this point, then you may have a bad injector, even though it's new. Start the vehicle up, disconnect one injector at a time and see how the vehicle is running. If you find one that you disconnected and it does not affect how the vehicle idles, then there is your bad new injector, or shall we say, your malfunctioning new injector. The black smoke is telling me that one of the injectors is running rich, or not injecting as it should. Also, make sure that all of your connections are good and that you installed the injectors that they are sealing properly. Hoping this helps my friend. Thanks for watching and asking. mad Mike the hammer SPC

[@alfonsocamacho2234]

@@SweetProjectCars thanks for your reply man... I will work on this next weekend and let you know how it went..