Splitting signal from Behringer Stage Boxes to 2 Consoles through one cable

[@sounddoc92]

Just fyi, the console with the clock set to internal will be the one with gain control and the other console(s), will have trim. Not sure on the wing but on the x/m32 console there is a separate page which you can adjust the gain(if your console only has trim and need a little more level coming in)

[@bradenlarsen2074]

It would be awesome if you could run a cable from the rack back to the full-sized wing to create a loop for redundancy, kind of like digico's opticore, if any of the middle connections were broken the signal could go back around the other way

[@steffsb9895]

In which situation to use the HA Remote AES5O function, thank you

[@rolfdc2934]

The HA remote is to be used if gain for the local inputs from a wing console need to be controlled from the other wing console via AES50

[@sweettreeproductions2149]

@rolfdc2934 is correct.

[@DustySeven7]

Note that with the s16 box and the dl16 box you dont have to do the output routing like you did, the boxes have a new splitter mode that does all the routing for you. I believe the s32 and dl32 will auto split with a console conntect to both sides, but if you add a sd box or the dl8 I think you have to start doing manual routing like you showed.

[@sweettreeproductions2149]

Awesome! That is great to know.

[@BlakeTechnology99]

Are those sE V7s? How ya liking them?

[@sweettreeproductions2149]

One of those is an SEV7. The rest of them were CAD D90s that we have all over the shop. We have sold a few hundred of the V7. A lot of people like them. We are not the biggest fan they work for some applications sometime just not all the time. We really like the Austrian Audio and Heil capsules we’ve been using the last few years.

[@duaneallen1792]

The V7’s are great. If you like SM58’s…. They are a better fixed version of a 58 with a Hyper cardiod pattern.

[@duaneallen1792]

There is a reason they are very popular.