Swimbait-MANIA: Running A Ton Of Soft Plastic Swimbaits

[@WorldsWorstFishing]

Thanks for tagging along, which one's were your favorite?

[@deadeyedarren]

The baby bass bloodlines are killer! My favorite yet. Great way to implement the black bloodline.

[@WorldsWorstFishing]

@@deadeyedarren 🙌

[@avifreed5243]

Those light hitch big ones and the light blue small swimbaits are sick!

[@fernandoisidrohernandez4840]

How are you so good at this ?

[@basscatlildave]

Baby Bass look awesome

[@bentoutofshape6319]

That last hand pour was awesome! It was most definitely a "Golden Trout" the par marks on an adult fish is a dead giveaway. Keep living the dream!

[@FreedomFishing]

They all look amazing! Especially the orange trout

[@kyledooney5565]

Also the golden trout mold that was pretty good turned out awesome.

[@Papaws-Hobbies]

Baby bass was my favorite. You are making me want to start making baits.

[@theoutdooroffice432]

does angling AI have the duel injector with the mixing block?

[@cfuzzkennedy]

Ever tried mixing with a 5 gallon paint mixer that attaches to a cordless drill? They have them at most home improvement stores.

[@DeeDee-vu5mi]

Great looking baits. I have yet to get the process down on doing a 2 color injection with the color seperation you get. I get more of a half swirl in places.

[@karlh6692]

Have you tried pre casting the blood lines and internal organs of the fish onto the hook plate So it is aligned and suspended inside the cavity allowing an over skin injection?

[@bigdaddyg.8708]

Impossible to choose a favorite, they're all awesome but that Emerald Shad takes the cake! Another great video saved in the Chris Jones KZbin vault.

[@WorldsWorstFishing]

Heck yeah! Thanks for watching

[@johndedrick4619]

Great job!!!! Enjoy each video!!!! For me, it's a tie between the Baby Bass and the Cut Throat Trout. Thank you so much for sharing your craft!!!!

[@WorldsWorstFishing]

Thanks for watching

[@moedf5317]

Its really nice, i know the Melt but where can i bye the Plastisol?

[@SnappySnapfire]

Them are beautiful baits! Them 8 inch would be awesome here in Minnesota for Pike or Muskie! Love the shade colors!

[@kyledooney5565]

Where can I find some molds or makes molds between the 4 inch and 8 inch range? I’m using them more for Seabass and lingcod?

[@anthonyreed7745]

Can you put the link you used to get the emrald shad molds please I got to make some

[@mateuszpurgal6662]

could you try and do a rhubarb and custard colour shad? (popular in the uk)

[@DiegoPablos3]

Hard to decide on a favorite, they all look great! Keep up the great content coming!

[@WorldsWorstFishing]

Please keep watching the content 👍

[@aaronschwanke3563]

Man any of the color shift ones you do are awesome! Thanks for all the great videos!

[@WorldsWorstFishing]

Thanks for watching

[@Snap-Time]

Love the way those baby bass came out with the black line on the side! They all looked great, really, but the baby bass was my favorite!

[@WorldsWorstFishing]

Thank you

[@rickybell2.056]

You don't get much shrinkage or a dip after cooling , i use lureflex and find it dips on the top if i quick cool my lures , thats a very professional set up you have , you make nice lures sir 😊

[@raymonddebrooke55]

The rainbow trout are beautiful. The beer was nice too.

[@WorldsWorstFishing]

haha thanks!

[@frogassassin1587]

That last color would the pink line look better skin poured because in the picture it looked like the orange came up under it? I liked that color tho👍

[@jamesscallyiii27]

Emerald shad & baby bass are by far my favorites, getting the itch to start making soft plastics because of your channel, look forward to getting the notifications & watching the vids, good stuff

[@WorldsWorstFishing]

Thanks James

[@rwilliams160]

Those are all beautiful baits. Being just a few weeks past the 4th, that red, blue, and silver is a favorite. But for the private pond I used to fish, that baby bass would have been killer. Love them all! Doing all those eyes deserves another Yuengling!

[@WorldsWorstFishing]

yes it does

[@razorbak6783]

Awesome work....baby bass looked really good!!!!

[@gsloat2424]

love my rainbow trouts in the 8 in you made for me! keep killing it!

[@WorldsWorstFishing]

heck yea

[@i2aspire]

Way to go they all are awesome, like to see you use some to catch some bass.

[@WorldsWorstFishing]

Me as well haha

[@gregphelps1989]

Good job on that trout color... I like the baby bass ones. That system for those is pretty cool

[@WorldsWorstFishing]

I love it

[@shanewickham8667]

such amazing work man the texture on those baby bass baits is so good.

[@WorldsWorstFishing]

thank you

[@konsta0415]

I love the emerald shad and baby bass because they resemble baitfish nicely and i think they would work in my area for pike

[@WorldsWorstFishing]

Thanks

[@andepenn71]

Great job on the molds man!👌🏾

[@frogassassin1587]

I’m going to try to copy some of your Swimbaits when I get my mold so keep them coming 😂

[@WorldsWorstFishing]

Give it a try

[@frogassassin1587]

World's Worst Fishing maybe they will turn out half decent but I haven’t decided on the marlin baits 7.5 or your angling ai I’m getting them in a couple of months so I have time to decide

[@tezzabhoy1888]

Frogassassin 15 how did you get on?

[@ricolatson7004]

Where do you get your molds from? And do you do shrimp as well?

[@theodorehope4238]

Your baits are second to none. Love all of them

[@WorldsWorstFishing]

Thanks buddy

[@keithgagnon761]

Loving the vids I just subscribed but the last trout is a golden trout they originate from Virginia also keep grinding on the vids they r awesome!

[@ryanferrara2996]

I like the baby bass and both trout's. Great job.

[@WorldsWorstFishing]

Thanks 👍

[@youngfisho]

These baits look awesome.

[@chriswren3636]

Bling trout and baby bass where awesome but love them all keep up the awesome work

[@WorldsWorstFishing]

Thanks man

[@jaychino1621]

which plastisol do you recommend for grubs or small swimbaits under 3"?

[@chrissherwin89]

Great video and great baits. I have learned so much about this hobby watching your videos. It's really hard to select just one favorite. They are all amazing baits

[@WorldsWorstFishing]

That's my goal is for my audience to learn about this great hobby

[@lukealbers7520]

What mold is the 8 inch that you used to make the trout? Beautiful colours on all of them!

[@WorldsWorstFishing]

Stankx ribbed mold

[@lukealbers7520]

@@WorldsWorstFishing thank you sir

[@deadeyedarren]

I just bought some basic injection supplies to get started. 6oz injector, a few Do-It cast molds, some dead-on plastic, and a variety of pigments and glitter. I would like to shoot more baits more efficiently but I’m not sure if I should buy another injector or buy more molds. What would you recommend I get first?

[@WorldsWorstFishing]

Molds..more cavities the better

[@deadeyedarren]

World's Worst Fishing Thanks for the help. I’ve learned a lot from your channel and I really appreciate your content.

[@juanchavez6152]

Where do you order that size bottle for lure works paint ?

[@devonavery2642]

on the 4 inch anging ai handpour, how do you get the eyes to stick to the bait before clear dipping?

[@WorldsWorstFishing]

loctite gel, i dont dip the ai pours tho

[@michaelmullane8141]

The baby bass are amazing ! What fish would you target with that giant trout.

[@cherokeeboggs534]

Love the shad and baby BASS colors LOVE to have some of those 2 colors. Awesome great job.🇺🇸✋😎😷

[@WorldsWorstFishing]

Thanks 👍

[@richardcooper38]

What a great channel. I'd have to go with the baby bass.

[@tracynewman5246]

Sweet the 4” just is a good looking bait still would like to see it swim before I buy ....awesome

[@WorldsWorstFishing]

You can see it swim on the video where I launched the 4-inch open for

[@WorldsWorstFishing]

*pour

[@jackiemchugh8362]

Love all your content you probably won’t read this but if you do pls after you make the swim baits can you pls fish with them

[@WorldsWorstFishing]

I don't get much time to fish but I hopefully will get some footage soon now that it's cold

[@dmilleroutdoors]

Baby bass & Emerald shad I think would work the best. Very good realistic colors! Great job man love the content

[@WorldsWorstFishing]

Thanks for tuning in

[@customrodsandbaits8620]

They all look good! I gotta say I like the 8” trout. But i would throw any of those. You are the hand pour master! NICE!!!

[@WorldsWorstFishing]

Thanks 👍

[@artfanatic405]

So when do you clear dip vs not clear dipping?

[@pimpshack81]

Man those emerald shads are perfect !!! Those are hawg killers for sure 👊👊👊

[@WorldsWorstFishing]

Some of my favorites I've ever done

[@pimpshack81]

World's Worst Fishing they are masterpieces 🤘🤘🤘

[@Jordankons123]

U should do more giveaways. I don’t have instagram

[@gurohyena3649]

I think the grout color is called a golden trout. That one was my favorite.

[@WorldsWorstFishing]

yeah a golden trout for sure

[@boanderson6716]

Is pourasol plastic good for lure making because it is super cheep and seems good I just wanted an opinion

[@WorldsWorstFishing]

i used it for years..it is very decent stuff..you will need heat stabilizer tho to keep it for scorching during remelts..my opinion

[@boanderson6716]

World's Worst Fishing thanks

[@byerboys2607]

Love those bling trout red white and blue ish type pattern gonna have to grab some of those from ya but I don't have a Insta so I'd have to em mail you

[@WorldsWorstFishing]

Send me an e-mail, world's worst fishing at gmail.com

[@Roders8189]

Are you still selling baits? I'd be interested in some 8 inch swimbaits in rainbow trout.

[@kingofaces4384]

You have probably been asked before and answered the question already or made a video about it, but is it possible to remelt elaztech? I know it isn't plastic in the traditional sense but is it possible?

[@WorldsWorstFishing]

nope!

[@kingofaces4384]

Good to know thanks

[@jonnquasine]

where did you get the molds?

[@The420MadCat420]

The trout was amazing! New sub here from Australia, just getting into fishing, haven't gone yet due to COVID-19 restrictions. But it's fun learning and watching fun new videos. Much Love from Melbourne, Australia😊✌❤🇦🇺

[@jimmyruffin2695]

This is jimmy Ruffin! I like all your colors, however the baby bass is my favorite since I fish for bass mostly! Good work!

[@WorldsWorstFishing]

Good choice!

[@andrewjohnterry7630]

Quick question what clear do you use and how do you get it ready to dip

[@andrewjohnterry7630]

@world worst fishing

[@1xdramakilla]

Want kind of blueish material did you use to mold that 8” swimbait?

[@WorldsWorstFishing]

its a silicone

[@outdoorswithmollyk]

Off topic question. Do you know what size your core shot rods are? Like thickness

[@WorldsWorstFishing]

i do not

[@MrTjmk]

When using the silicone mold for the larger swim baits, can those be placed safely placed on the Hot-Plate without melting or charring? I ask because the concentrated heat coming out of a heat gun can just as easily reach a couple of hundred-plus degrees if pointed at the same area of the mold. Is it possible to just set the heat of the Hot-Plate just hot enough to keep the Plastisol from hardening to quickly before that next layer gets added?

[@WorldsWorstFishing]

The heat plate will mess em up

[@MrTjmk]

@@WorldsWorstFishing I believe you but, it's hard for me to picture in my mind how a hot-plate set at a heat level that the silicone mold will tolerate and that will mitigate the cooling of the plastisol just enough to get it to flow correctly for you, will be negatively effected by placing it on said hot-plate. Do you know if possibly this same silicone is microwave safe? This may be another option for keeping the silicone mold just warm enough to get the plastisol flow and viscosity just right.

[@WorldsWorstFishing]

@@MrTjmk most people who heat a silicone mold do so in a convection oven at a controlled temp

[@MrTjmk]

@@WorldsWorstFishing That makes sense. I just got my order of Plastisol. I'll be trying out my newly 3D printed mold within the next week or so. I printed them out of resin with sufficient heat resistance to withstand the shock of molten Plastisol as it's injected into the cavities of the mold. This same resin is said to be microwave safe so I look forward to testing these DIY molds. Thanks for taking the time to respond to my inquires. Sorry if they come off sounding stupid. I'm learning as I go.

[@teamfishlineswfl9099]

All...just awesome..Dang!!

[@MisterDanis1]

Do you have a website where you sell, Facebook? No Instagram here

[@Mjones8383]

2 questions, how do you keep it from forming a dip in the top of v the 4 in mold and do you want to have them level or leaning?

[@WorldsWorstFishing]

the molds needs to be hot!

[@rrgH20polo]

New here. Nice stuff! Do you sell these lures?

[@unclejay9205]

This channel so underated. 👍👏

[@WorldsWorstFishing]

Let's fix that!

[@unclejay9205]

I gotchu fam

[@raymiller3646]

Hey im new wanting to get into it what's a basic order for a guy to get to start

[@WorldsWorstFishing]

Check out a video I have called how to get started on a budget

[@charleshall3420]

I really love the emerald shad bait my guy👌🏿👌🏿😎

[@WorldsWorstFishing]

Thank you

[@atomicoutdoors8631]

Great vid what your favorite swim bait

[@atomicoutdoors8631]

Kinda wanna get some hand pours

[@ncfishon965]

U make open pouring look so ez. I got a lot of practicing to do my attempts so far have been rough

[@WorldsWorstFishing]

It's an art form for sure...I've had to practice a lot

[@ncfishon965]

@@WorldsWorstFishing facts. Maybe mine will look better once my Jetson eyes 👀 get here. He must be behind been over a month.

[@WorldsWorstFishing]

@@ncfishon965 he's in high demand

[@ncfishon965]

@@WorldsWorstFishing im sure its all good just gives me more time to practice lol

[@frankvazquez0238]

How or where can I buy those molds for a 4 inch paddle tail with the hook slot?

[@WorldsWorstFishing]

Angling ai molds

[@TycodOutdoors]

Man these look awesome!

[@DogDudeDrone]

All so sick but I like the baby bass and emerald shad for sure! I'm gonna have to get a couple packs of your baits before you get famous ;)

[@WorldsWorstFishing]

Haha yeah for sure man!

[@kbody_slade]

How much salt do I need to use in my worms?

[@Ncbasspuller]

where can i buy these molds

[@timevans4874]

I love them all keep it up

[@joncook4148]

I know this may be a long shot but is there a kit for like “beginner” bait pouring? Like a starter kit or something?

[@WorldsWorstFishing]

not any that I would recommend

[@fishman92772]

You can not go wrong with anything Dead on Plastic. Easiest stuff I have ever worked with.

[@WorldsWorstFishing]

@@fishman92772 🙌🙌

[@jeihlonlewis8911]

The swimbait vids are the bast

[@WorldsWorstFishing]

👍👍👍👍

[@hoo33u]

I think that Emerald shad would kill in a clear water situation.. A swim bait will be my next mold I have only shot Senkos so far. (I get a little better each time)

[@WorldsWorstFishing]

That's the goal....improve every time

[@matthomas6575]

Love the baby bass

[@hagman6124]

The trouts gold looks great I would love to bye some!

[@DeChane369]

Damn I was hoping for some more sunfish/bluegill colors, still a bunch of great baits though

[@WorldsWorstFishing]

haha those are tough

[@DeChane369]

@@WorldsWorstFishing yeah they are, but definitely my favorite color patterns on a swimbait by far. Especially because that's the main food source of all the fish up where I live

[@finnmitchell9698]

the trout you did is a california golden trout. that one was probably stocked.

[@MrCami2]

A great video and, mainly, great soft baits. Your videos are a really good training moment for a lot of Soft Bait Makers. What do you think about a cold top coat, as 50% PVC glue + 50% MEK, instead to dip soft bait in hot clear plastisol? Sometimes, with thin soft baits, you can ruin them with the last "bath" because the weight of body can stretch the tail. Bye Cami

[@WorldsWorstFishing]

If you did them before they are set up then yes you can over stretch the tails..that is what I would consider a beginner mistake that you will quickly fix.

[@MrCami2]

@@WorldsWorstFishing They were set up, they were THIN, so this kind of COLD top coat could be an useful option for a lot of us: let try before judge

[@maxwellsmart89]

Can you recommend me a good open pour worm mold?

[@WorldsWorstFishing]

Angling ai MoJo worm

[@kix-mi9it]

Bro... how can I purchase some of your lures?

[@chrisferry9878]

Definitely a talented man...

[@WorldsWorstFishing]

Thank you

[@geraldpacheco1260]

Nice change of pace video.

[@WorldsWorstFishing]

Glad you liked it!

[@gregorystacy470]

I like them all but I like the 4 inch hand pour the best.

[@WorldsWorstFishing]

👍

[@mikeockler7121]

You can throw those happy meal toy trout my way if they need a home. I have two little boys who need to learn how to throw baits without losing daddy’s plastics hahaha 😆

[@WorldsWorstFishing]

Right on

[@tomaskolecko3748]

As Always 💪💪💪💪👍👍👍👍 (Czech republic)

[@noahmcgalliard8622]

Just got my 5 gallon bucket in now I'm ordering me some new colors on top of the ones I have.

[@WorldsWorstFishing]

🙌

[@rickybell2.056]

Small green bass is my favourite

[@TheMrcooldjbigones]

I don't see a link to purchase any of these baits. Shall I try searching your store on Facebook marketplace?

[@WorldsWorstFishing]

That's because I do not sell online, I'm a content creator not a bait store. the only way to buy my creations is to catch one of my sales post on my Instagram account

[@TheMrcooldjbigones]

@@WorldsWorstFishing oh, ok I'll be sure to look you up there. Cheers, Michael

[@matthomas6575]

Like the baby bass I’m in Australia the baby bass would be good for dusky flathead in the salt Australian bass in the fresh