UPDATE: The sigpatch-updater is no longer available on github, you may search elsewhere forget the tool and manually install sigpatches to your switch.
@iRaven-_-5 ай бұрын
what are u saying that this video is useless?
@kushalean4 ай бұрын
so could you not link one that works and helps us or no because basically your saying it will get us banned?!
@slambergamer914 ай бұрын
why it removed. will this get our device ban ? still safe ?
@GrownUpGamingGUG4 ай бұрын
I'm saying you can find it elsewhere or you can do it manually like in this video kzbin.info/www/bejne/epS3gItne7lpiMU
@TwskiTV3 ай бұрын
@@slambergamer91 if you can't search a link on your own and you're asking those kind of questions, maybe you shouldn't be jailbreaking a console in the first place
@clizana7 ай бұрын
This has to be one of the most scuffed tutorials i've seen in a while and yet, works like charm lol. tysm!
@GrownUpGamingGUG7 ай бұрын
Thanks but what's the meaning of scuffed?
@clizana7 ай бұрын
there were a few wrong steps, i did them wrong like you and then the right way with you too@@GrownUpGamingGUG
@GrownUpGamingGUG7 ай бұрын
Oh, lol 😂
@d05music177 ай бұрын
Bro I dig it. Even better when things don’t go as you expect (which is for most of us) that’s more helpful than a smooth run. Good stuff will follow and sub. Thanks
@GrownUpGamingGUG7 ай бұрын
Thanks for the comment and support!
@ginyuTV7 ай бұрын
works great, couldve definitely cut this down by half time wise but everything works
@GrownUpGamingGUG7 ай бұрын
Wanted to make an in depth guide for newbies.
@JohnTurney9 ай бұрын
I just got an Oled switch pre-modded :D So awesome!
@GrownUpGamingGUG9 ай бұрын
That's great, still good to know how Hekate and atmosphere works. :)
@kennethokay7 ай бұрын
Is it work for oled and battery extended version?
@user-ym1qf4ox5v6 ай бұрын
@@kennethokaymod Chip
@cupelixwan8 ай бұрын
I have followed other videos you have made in the past and they always were very through and helpful. I am getting an Unpatched V1 Switch (Brand New in the Box Still), and using this video to set it up. Thank you for these guides you make, they are all very well done.
@GrownUpGamingGUG8 ай бұрын
Great to hear! Thanks for the comment! Appreciate it!
@tobenachosandtacos28928 ай бұрын
how did it go?
@DrBeefy7 ай бұрын
I feel bad that you paid for a v1 at this point. Other versions can be modded now for like 10 bucks. Also there is the mig switch.
@GrownUpGamingGUG7 ай бұрын
@@DrBeefy depends how much he paid for a v1 unboxed. I think it will definitely go up in value considering how it gets rarer as time goes by. Where did you find someone to mod the switch for 10 bucks? Sounds unlikely. Also mig switch is totally different, it just plays pirated games which is different from cfw. And it's proprietary. I did preorder one for testing and video content but if I was just a user and has a modded switch, definitely wouldn't buy it.
@DrBeefy7 ай бұрын
@GrownUpGamingGUG the chips themselves cost 10 bucks and are super easy to install.
@ivan_at_sea64Ай бұрын
Wow. I have just noticed that you have Nintendo Switch videos as well! Very informative. You channel is the best in portable gaming topics!)
@GrownUpGamingGUGАй бұрын
Glad you like them! 😁
@_BootyTang_9 ай бұрын
Thanks can't wait to try, the other video I was gonna follow got taken down so I'm happy you decided to put one up!
@GrownUpGamingGUG9 ай бұрын
Good luck!
@Mefrom_Here5 ай бұрын
I just picked up a switch waiting for it to arrive in 1 day will definitely try this out
@GrownUpGamingGUG5 ай бұрын
Only works on v1 unpatched switches. You bought one second hand?
@Djsanddy5 ай бұрын
Thanks a ton brother. Followed the guide step by step and it worked. very detailed and easy to follow. keep the good work up. I found another way to quicken the install I copied the roms to the SD card and then installed from there. It was much faster.
@GrownUpGamingGUG5 ай бұрын
Glad it helped 😁
@icemanff238 ай бұрын
Best informative instruction on how to get CFW on your switch thus far. Your video helped me allowed to have it done properly on my switch. Used your one cause you included the NUT explanation which was really helpful for me. Thank you man and appreciate the video you made
@GrownUpGamingGUG8 ай бұрын
Glad it helped! Thanks for the comment! Appreciate it!
@Honesty697 ай бұрын
Good day bro,,I have tried everything/way to get my OLED to boot CFW,,just followed your process to the t,,still nothing 😭,will boot to other options but not CFW,,plz help,,I'm on 17.0.0,,do you think that's the issue? Should I drop to 16.0.? I don't know what else to do🥴. Error is the one that says unknown pkg1 ver. HOS ver. not supported, your emummc mite be corrupted.@@GrownUpGamingGUG
@efrainmachay24835 ай бұрын
Thank you so much I was stuck following other tutorial cuz a fusee error and yours fixed my issue
@GrownUpGamingGUG5 ай бұрын
Glad it helped 😀
@PabloGamer2-rh3rk7 ай бұрын
To play installed games online you have to use emummc or syscfw
@GrownUpGamingGUG7 ай бұрын
I do all my online stuff with sysnand.
@mrpaddenstoel9081Ай бұрын
Do you need to have ur PC if you wanna boot in hekate from stock everytime even with autoRCM??
@GrownUpGamingGUGАй бұрын
@@mrpaddenstoel9081 no but you need to have a way to inject payload like using pc, android, iOS, payload injector.
@mrpaddenstoel9081Ай бұрын
@@GrownUpGamingGUG 1 how can i do it from ios? 2 with payload injector you mean something like RCM loader? 3 i also really appreciate you always commenting so fast to almost a 1000 comment thank you!
@GrownUpGamingGUGАй бұрын
@@mrpaddenstoel9081 1) there's iOS/android apps to inject payloa 2) yes there's dongles to inject payload available 3) thanks for the comment ☺️
@makandalp9 ай бұрын
What about patched switch? Bought mine very early in 2018.. But patched
@GrownUpGamingGUG9 ай бұрын
patched switch can only be modded with a mod chip and requires soldering.
@radio_bug9 ай бұрын
Which I've done and it is a pain in the ass
@GrownUpGamingGUG9 ай бұрын
Soft modding and hard modding are different levels.
@Vanish15420 күн бұрын
Ugh! I have a switch that’s patched but it’s firmware version out of the box is 2.3.0!! Oof if 3 was a 2 I could’ve maybe modded it!!
@GrownUpGamingGUG20 күн бұрын
If it's patched, doesn't matter the firmware, you still need a mod chip. If it's an unpatched switch, even if you updated to the latest firmware it's still moddable.
@5543Mj9 ай бұрын
I love the tutorial! I must ask one question, will I be able to still use the eShop? (to redownload games)
@GrownUpGamingGUG9 ай бұрын
If you do it correctly, you're SysNand should be clean and safe to go on the eShop. Just do all the modding, cheats, game backups, etc on EmuNand.
@bit-zh4gu6 ай бұрын
90dns setter isn't working for me. Nintendo remains unblocked even after rebooting to apply settings
@GrownUpGamingGUG6 ай бұрын
try manually setting it on internet settings and setting the dns.
@leezyputa90928 ай бұрын
i tried but my nintendo switch not boot after inject payload rcm ok
@GrownUpGamingGUG8 ай бұрын
make sure your files are updated. fusee.bin, your atmosphere files, hekate files.
@sublimatedsnake6 ай бұрын
Hey mate, my sd card doesn't format, what could be the issue?
@GrownUpGamingGUG6 ай бұрын
Yes that happens to me with that app sometimes too. I just format it with windows and then go back to the app to format fat32.
@sublimatedsnake6 ай бұрын
@@GrownUpGamingGUGOK cool, it got fixed! But how do i connect to filezilla, i don't know where to find my host or username
@GrownUpGamingGUG6 ай бұрын
When you launch the FTP app on switch, all the info you need is on the screen.
@quranrecitation27308 ай бұрын
very good bro , i have a moded switch lite it can be work ?
@GrownUpGamingGUG8 ай бұрын
If it's already modded then yes you can.
@paoworkfromhome8 ай бұрын
Bro had 1mil subs posting random things
@MinoxJoen7 ай бұрын
@@paoworkfromhomecrazy ! This world is HUGE lol.
@MinoxJoen7 ай бұрын
@@paoworkfromhomeif he resells these he’d be rich after taking tips from this tutorial.
@Thomas-tx6dhАй бұрын
When I start Atmosphere, the screen goes black and stays that way. Even if you use hekate, it will still work. How can I fix it? Atmosphère ver1.7.1 switch ver18.0.0 Can anyone help me?
@GrownUpGamingGUGАй бұрын
You can start atmosphere when launching from Hekate but not from tegrarcm?
@Thomas-tx6dhАй бұрын
@@GrownUpGamingGUG tegrarcm to do, it's impossible.
@GrownUpGamingGUGАй бұрын
I don't understand you
@xvnon8 ай бұрын
Great tutorial followed it perfectly and switch is working well but my wi-fi just randomly stopped working on the cfw just won't connect at all
@GrownUpGamingGUG8 ай бұрын
Just the connection or WiFi adapter broke?
@xvnon8 ай бұрын
@@GrownUpGamingGUG it won't connect to the router, reset it but everything else in the house can connect and will connect on ofw just not cfw
@GrownUpGamingGUG8 ай бұрын
Check the settings maybe?
@xvnon8 ай бұрын
@@GrownUpGamingGUG yeah I reset them all too and I definitely did 90dns and checked as well so it wouldn't be banned
@GrownUpGamingGUG8 ай бұрын
maybe you blocked everything including the internet. try undoing the 90dns (make sure you don't go on nintendo servers though) and see if internet is working.
@adonizss2 ай бұрын
İs it work with mod chipped switch oled because im thinking to mod chip my switch oled
@GrownUpGamingGUG2 ай бұрын
Yes, if you have a mod chip then you don't need to do the first steps to go into RCM.
@adonizss2 ай бұрын
@@GrownUpGamingGUG Ok thanks i think i dont use my switch online so i will modchip
@GrownUpGamingGUG2 ай бұрын
Yes, it's either mod chip or no cfw for oled switches 😂
@ManualJod9 ай бұрын
Good stuff and nice video i was wondering if you could do a video on the new system update and how to update a modded switch to the update
@GrownUpGamingGUG9 ай бұрын
Ok coming up
@underourrock4 ай бұрын
So you now have to use a computer to boot your switch every time it is shutdown or rebooted in order to inject hekate. That's a bit of a pain. Thanks for showing the process from the beginning and how it works.
@GrownUpGamingGUG4 ай бұрын
Actually you can use your phone with a usb-c cable. There's payload injector apps for android and iOS. Or you can buy a RCM injector tool. So it can be done without a computer. I try to keep the switch on sleep rather than shutdown so I don't need to inject frequently.
@underourrock4 ай бұрын
@@GrownUpGamingGUG thank you for the options! Knew about the basic rcm jig, but didn't know about the injector. If I can have one of those in my case when I travel then I don't have to worry about rebooting thoughtlessly. I don't always have C to C cables with me as some of my older chargers are still type A to C.
@GrownUpGamingGUG4 ай бұрын
I prefer c-c cable, just put one in the switch carrying case. I had a RCM injector back from sxos era, they require power so you have to charge it from time to time and obviously when you want to boot up the switch it is always out of power.
@underourrock4 ай бұрын
@@GrownUpGamingGUG good to know. Thanks!
@robertdaone7 ай бұрын
So after doing this I can install game emulators on the switch?
@GrownUpGamingGUG7 ай бұрын
you could!
@wtfbearr79055 ай бұрын
I have a unpatched switch and was wondering after the step by step is done can I update my console in stock mode or leave it un updated and will I still be able to play online
@GrownUpGamingGUG5 ай бұрын
You can update the stock firmware for online play.
@Cyko..9 ай бұрын
It's still 2023.
@GrownUpGamingGUG9 ай бұрын
future proofing this video lol. it's not going to get a lot of views until 2024.
@Mind_BENDERfacts7 ай бұрын
@@GrownUpGamingGUGyour right
@user-xm5kl4jr8w7 ай бұрын
No
@zznet74916 ай бұрын
HAHAHA
@curtis4455 ай бұрын
Found this in 2024 haha
@user-gh2mm1eo7l7 ай бұрын
Hi, i am super new to this and just bought a oled switch for my son, watching a bunch of videos trying to figure out "how to", just wondering if i have to install a chip like i read in other forums? Thank you your video is awesome and i had to subscribe!
@GrownUpGamingGUG7 ай бұрын
This only works on v1 unpatched switches. For other switches including the switch oled, you need to install a mod chip. Thanks for the sub!
@user-gh2mm1eo7l7 ай бұрын
Thank you, you are awesome!
@quentinyeung86288 ай бұрын
My system version is 17.0.1 not the same as yours and when I put in the SD card after copied the files from my computer in the switch, it prompt that the SD card is being used by another Switch, I need to delete the data or else can't continue... What shall I do??
@GrownUpGamingGUG8 ай бұрын
maybe backup the data on your sd card. then format the sd card with your switch and then start then move your atmosphere, hekate, etc files over. make sure to backup your stuff.
@Alina-qp6ce5 ай бұрын
It’s not working:( we get this error message after we want to start the CFW: unknown pkg1 version. HOS version not supported or emummc corrupt!
@GrownUpGamingGUG5 ай бұрын
Make sure the atmosphere, Hekate and payload files are updated and correct.
@colinblanchard13144 ай бұрын
Hi I am stuck on HEXATE-IPL 25:35 still blank
@GrownUpGamingGUG4 ай бұрын
Maybe your atmosphere files are bad? Just make sure atmosphere, Hekate, payloads and sigpatches are good and in correct location really, I suggest downloading them again.
@flandrescarlet738612 күн бұрын
This tutorial can make me play online with mods ? cause i wanna play smash bros with training mod pack and imput latency mod for better online expérience.
@GrownUpGamingGUG12 күн бұрын
@@flandrescarlet7386 no, if you play with mods you risk a ban.
@lessthanpopi13 күн бұрын
I don’t get it, do you have to inject the payload every single time you reboot?
@GrownUpGamingGUG13 күн бұрын
Yes, that's why I keep the switch in sleep mode rather than turning it off.
@patrickneky96383 ай бұрын
Great tutorial. I have got to a point in the video that I cannot go any further, I am guessing this is because I made the switch firmware update to 18.01 prior to my jailbreak attempt. I get to 25:25 and select the CFW ( emuMMC) icon but then does not load and kicks me back home page without launching. I launched the fuse payload and I was able to get home page on switch/ from there when i clicked on the album I received an error message and could reboot. if anyone has any tips please let me know. Recommend doing an update video when there is an update to atmosphere.
@GrownUpGamingGUG3 ай бұрын
make sure atmosphere, hekate, payloads and sigpatches are all updated to the latest. i'd recommend doing the whole process from scratch with the latest update of everything.
@lonesuk7 ай бұрын
Thanks for switch video just started to do my switch again I forgot the steps remember watching your video the new cart that’s coming out fit switch looks nice has a slot for micro card suppose to be a dumper coming out to
@GrownUpGamingGUG7 ай бұрын
Glad I could help! if you have a v1 unpatched switch, you don't need to spend over 100 bucks for a flash cart and dumper.
@fridgeman72 ай бұрын
The tinfoil link doesn’t work please if you have another link halp
@GrownUpGamingGUG2 ай бұрын
Their website has been down for some time now. There's alternative apps like goldleaf or you can try harder to find tinfoil (nothing is really taken off the internet 😉)
@AdamTheHammer5 ай бұрын
hey man a little problem, annl the nro files cause my switch to crash everytime i try to run them and the icons whe i look for them in the albums folder is a switch with an exclamation mark on it, what am i doing wrong?
@GrownUpGamingGUG5 ай бұрын
I just put the nro files in the switch folder and launch it from album. No special techniques. Maybe the nro files you got are corrupted?
@AdamTheHammer5 ай бұрын
@@GrownUpGamingGUG i thought this so i re downloaded them and put the new nros in the switch folder and still get the same problem. im at my witts end with it
@GrownUpGamingGUG5 ай бұрын
Maybe your atmosphere files messed up? Try installing everything from scratch.
@AdamTheHammer5 ай бұрын
@@GrownUpGamingGUG ive done that too. same story. whats throwing me is tinfoil installed no problem from the nro and i and do all the unmentionable things tinfoil can do with no problem, this is a weird one to be sure
@AlexKingSL4 ай бұрын
I NEED HELP!!!! i came untill ( 25.32 min in the video) cfm launcher , but my device never go ahesd. just black screen. pls advice!!
@GrownUpGamingGUG4 ай бұрын
So does your computer recognise the switch in RCM?
@Misho875 ай бұрын
How do I remove everything that has to do with the jailbreak? I want my switch to be normal as it was before jailbreaking it. Need help tried haku33 but now I can’t login to my stock os no more, Nintendo logo boots up and then everything is black on the screen. Please help me
@GrownUpGamingGUG5 ай бұрын
All the files are just on the SD card really. Just disable autoRCM in Hekate and just boot normally and you will boot into stock os. Then you can format the SD card in stock os.
@Misho875 ай бұрын
I don’t know if I bricked my switch after Haku33 because when I want to start normally only Nintendo logo shows up and the pitch black screen
@GrownUpGamingGUG5 ай бұрын
I've never used that tool as I've never felt the need. github.com/StarDustCFW/Haku33 there's a part near the bottom of the page regarding "known bugs black screen after 17.0.0" and there is 3 possible solutions you might want to try.
@NGute877 ай бұрын
Finding an unpatched switch has been difficult.
@GrownUpGamingGUG7 ай бұрын
yes of course, there's not a lot out there.
@seavers114 ай бұрын
Thanks for this very good tutorial, i love your tutorials, they are simple explained, that is what i love. I get my switch with a mod chip, i think it will works the same as with the RCM ? THANK YOU FOR YOUR GREAT VIDEOS
@GrownUpGamingGUG4 ай бұрын
Thanks for the comment! If you have a mod chip then you don't need to do the first part with the jig to go into RCM.
@CommunitySkratch3 ай бұрын
why was everyone making a partition if the emu works on your sd card
@GrownUpGamingGUG3 ай бұрын
File based is easier to backup and transfer to another SD card if needed. People were afraid Nintendo can see the contents of the SD card if it were file based and ban you but I've not been banned. Also some say partition is faster than file based, but I don't feel any difference.
@MakerManX4 ай бұрын
Everytime I try to run tinfoil installer, a message saying "corrupt data has been detected" appears. Also, I've already manually installed sigpatches
@GrownUpGamingGUG4 ай бұрын
Most likely your sigpatches aren't correct. Try getting from another source and make sure it matches your current firmware.
@maxducoudray6 ай бұрын
When I try to run the NUT server on my PC, it says "could not get title id" from the atmosphere folders. Is there a step I missed? I didn't see him configure anything like this.
@GrownUpGamingGUG6 ай бұрын
No configuration, just install drivers and run the nut.exe.
@LorddOfChaoss6 ай бұрын
Everything works fine but I can't boot into anything except Fuse. When I try to return to Stock/OFW I just get an black screen error saying "unknown pkg1 version HOS version not supported"
@GrownUpGamingGUG6 ай бұрын
did you add the hekate_ipl.ini code in the description? worst case you can always go back to stock firmware by disabling autoRCM and just boot the switch normally.
@zezozac84954 ай бұрын
Hello sir my switch firmware is 13.2.0 can I install atmospare 18.0.0 or must I update the system firmware from 13.2.0 to 18.0.0 then jailbreak it to atmospeare 18.0.0 ?
@GrownUpGamingGUG4 ай бұрын
You don't have to update firmware to install cfw.
@nicholasramey45706 ай бұрын
When I’m injecting the file and I’ve made sure it is the correct file. The Nintendo switch doesn’t turn on. It turns on if I press the on button but it doesn’t load up hekate
@GrownUpGamingGUG6 ай бұрын
Try injecting another payload like fusee.bin.
@marciquaki50805 ай бұрын
When launching into into hekate, all my tinfoil games are gone but my micro sd card is still full, so the games are anywhere but where?.
@GrownUpGamingGUG5 ай бұрын
Hekate isn't the cfw so you won't need to see the games.
@marciquaki50805 ай бұрын
@@GrownUpGamingGUG I meant the cfw emu mmc launch option
@GrownUpGamingGUG5 ай бұрын
@@marciquaki5080 I'm not sure what you did to get to this point. But if I were you I'd probably just format the SD card and reinstall cfw and games again.
@robertkoripsky6407Ай бұрын
Hey, I bought a switch that I found out is banned. Do you think if I follow these steps I can get online?
@GrownUpGamingGUGАй бұрын
No, if it's banned already then it's not reversible.
@Milan56053 ай бұрын
I need only - boot android or linux without any touch to emmc?Question - when i have switch os in latest version - can i use hekate + boot linux?Can i reflash emmc to android or linux + boot or not?
@GrownUpGamingGUG3 ай бұрын
Why no touch?
@john69826 ай бұрын
What I do is setup a light theme to the normal Switch OS, and I setup the dark theme for the Atmosphere OS. So that way I know on which OS I am.
@GrownUpGamingGUG6 ай бұрын
That's a good method! Thanks for the tip!
@chriskavvadas3044 ай бұрын
A quick question, what’s the difference between sysnand and stock launcher (looks to me that they boot the same thing), and what’s the difference between emunand and atmosphere?
@GrownUpGamingGUG4 ай бұрын
Per my understanding, sysnand is the place where the original firmware is located, you can boot into custom firmware with this location but it's not recommended as it leaves a trace that you've tempered with it and if you go online afterwards you could get banned. Emunand is like a virtual machine separate from sysnand so you can boot into custom firmware here and do all the mods and play backups here safely. atmosphere is the name of the custom firmware. Stock firmware is the original firmware otherwise known as horizon os.
@crazynjmanАй бұрын
this may be a very noob question but if i replace the sd card currently in my switch now with a new one and follow the steps in the video is the jailbreak stored on the sd card. like if i put my old sd card back in will it just be a stock switch again?
@GrownUpGamingGUGАй бұрын
The cfw is stored on SD but the jailbreak is done by going into RCM and injecting payload. If you just want to go to stock then you just have to boot normally without going into RCM.
@mafakabebe8 ай бұрын
Sorry that im typing so much cuz each time i have a issue i already fixed it and delete my comment but ur so fast at responding😂
@GrownUpGamingGUG8 ай бұрын
Lol 😂
@sparklingautism5 ай бұрын
I followed this to the T. Everything worked fine and I eventually didn't play my switch much. Well my switch ran out of battery and when I tried to play again put it in charge etc. Nothing happens. It wont turn on not even with the 20 second hold power let go hold again for 10 seconds method. What do I do?
@GrownUpGamingGUG5 ай бұрын
keep charging it for longer. when you power on, since you have autoRCM setup, you will boot in RCM. the screen is just black, plug it in the computer with tegraRCMgui and you should reconize it and you can inject payload.
@sparklingautism5 ай бұрын
i had it charging all night, and tried that to, but i will try some more :) I will let you know@@GrownUpGamingGUG
@sparklingautism5 ай бұрын
while it does inject payload the screen doesnt light up and nothing happens@@GrownUpGamingGUG
@GrownUpGamingGUG5 ай бұрын
@@sparklingautism so the computer recognizes the switch and detects it's in RCM? Try injecting a different payload like Hekate.
@sparklingautism5 ай бұрын
i tried that, and then i got for a single second the screen turned grey a tiny red battery and a yellow lightning bolt appared, this was after it being in the charger for 3 days, and then nothing again, i feel cursed@@GrownUpGamingGUG
@skidnoob69918 ай бұрын
Can I play online again when my switch is already banned? No right? Probably no chance
@GrownUpGamingGUG8 ай бұрын
If you're banned you can't play online or go to the online store.
@Cosmic76Guardian7 ай бұрын
You know, I'm planning on getting another Switch (basically the OLED), alongside my unpatched Switch I got from Christmas 2018, so I can transfer all my unpatched Switch datas to the Switch OLED, and delete my main user with my account from my unpatched one, just to be extra 100% safe. But with this video, I'm thinking about it, since I bought an RCM jig, but I don't have a PC, so I'll have to use my Android phone and order a USB OTG (C-Cable). Just have to be extremely careful not to get my Nintendo account ban. -.-
@GrownUpGamingGUG7 ай бұрын
Good luck!
@Cosmic76Guardian7 ай бұрын
@@GrownUpGamingGUG Thanks, but gotta need more than luck, because I'm afraid I'll accidentally brick my Switch or instantly get banned lol. 🤣 Also, today's my birthday! 🎊😊🎉
@GrownUpGamingGUG7 ай бұрын
HAPPY BIRTHDAY 🥳🎂
@Cosmic76Guardian7 ай бұрын
@@GrownUpGamingGUG Thank you ^^
@brxvo70556 ай бұрын
My fat32 format doesn’t want to work it says “The process cannot access the file because it is being used by another process”
@GrownUpGamingGUG6 ай бұрын
It happens to me sometimes too. I just format it with windows and then use fat32gui again.
@brxvo70556 ай бұрын
@@GrownUpGamingGUG thank you
@andreaguerrini77775 ай бұрын
Can i still play my zelda cartridge in this modded switch or i can’t play a cartridge anymore?
@GrownUpGamingGUG5 ай бұрын
you can
@user-yj6jx3sh4d4 ай бұрын
Do we need to plug everytime on PC to start up the switch after it jail break
@GrownUpGamingGUG4 ай бұрын
If you shutdown, and you want to boot into cfw then you need to inject payload. You can plug into computer or use phone with usb-c cable or you can buy a RCM injector.
@gloth7 ай бұрын
when you start using 'album' switch allocates less memory, you should start by starting a game while pressing 'R'
@GrownUpGamingGUG7 ай бұрын
thanks for the tip!
@nickherr93387 ай бұрын
Yoyo followed every Step of you and everything seems to work ! But when im on the Stock Partition where i have Mario Kart 8 installed it says Software could not be started. Please help me bro
@GrownUpGamingGUG7 ай бұрын
i think i replied you on discord. anyway, the game is probably corrupted. you can check if it's corrupted in the game information. else, just delete the game and redownload. see if it works.
@raph21st9 ай бұрын
You are a GOD amongst men! Thank you!!
@GrownUpGamingGUG9 ай бұрын
Thanks for the comment! Appreciate it!
@downloadzy5 ай бұрын
Hi friend, I have lite version, is it jailbreakable?, if so, where can I plug the jig in? thanks
@GrownUpGamingGUG5 ай бұрын
Cannot soft mod at the moment.
@oscarcamcho3173555 ай бұрын
So to switch between system and emuMCC we will always need to have a computer around?
@GrownUpGamingGUG5 ай бұрын
There are apps on android and iOS that can do the same but you need a usb-c to connect your phone to the switch. Or you can buy RCM loaders.
@oscarcamcho3173555 ай бұрын
Okay I see thanks
@ganjean42099 ай бұрын
Good Stuff my friend!! Thank You
@GrownUpGamingGUG9 ай бұрын
Glad you enjoyed it! :)
@KY502ShinyHunter3 ай бұрын
Im hoping to do this in a week or so after my Switch SD slot reader part comes in (broke a while back). I do have a few questions: My system firmware is on the latest version 18.0.1, is it still safe to homebrew on latest version? Should I remove my Nintendo account from the Switch, do a factory reset and create like a temp account? I’m kinda worried about accidentally banning my account by mistake since I have a lot of digital purchases that my kids play on their switches. Don’t want to lose those in a ban. As I mentioned, I have 2 kids that play Switches (a lite and a newer patched Switch), but one of them prefers to use the unpatched Switch that I’m working to homebrew. How childproof is the CFW? Could they accidentally brick the Switch if they push any wrong options or buttons? I’m guessing it would be difficult, I also have a homebrewed 3DS and they play it on it since going in the internals of the CFW require button combinations.
@GrownUpGamingGUG3 ай бұрын
I think it's a good idea to factory reset it and then do the jailbreak and backup. If you setup the 90dns correctly the switch will not connect to Nintendo servers so it's pretty safe.
@GrownUpGamingGUG3 ай бұрын
And yes 18.0.1 firmware is fine.
@mayi84684 ай бұрын
TYSM, great video! I'm stuck at 25:25 though. When I choose CFW (emuMMC) the Hekate screen loads but then black screen and my switch disconnects from the PC. You know what the issue is?
@GrownUpGamingGUG4 ай бұрын
Once you boot into Hekate you should disconnect from pc anyway. Have you tried launching with fusee.bin payload? Maybe the Hekate launch with emummc cfw script is incorrect.
@mayi84684 ай бұрын
@@GrownUpGamingGUG thx. won't launch with payload too. The switch turns off at the Hekate/Atmosphere screen
@GrownUpGamingGUG4 ай бұрын
@@mayi8468 try charging the switch. Maybe it's out of battery.
@kingarron51493 ай бұрын
Hi, my Nintendo is done jailbreak and I wan to ask if I wan to make a new SD card with different games is it possible and Which part I need to start? Like when I play I can only need to change the SD card to play others games.
@GrownUpGamingGUG3 ай бұрын
Copy everything on the SD card to another SD card and it's fine. Best if you don't have any games on it and install them with tinfoil.
@BlackPoisonGamez6 ай бұрын
when i press the power button while holding the volume up it turns on
@GrownUpGamingGUG6 ай бұрын
Then you are not in RCM. Did you put the jig in?
@BlackPoisonGamez6 ай бұрын
@@GrownUpGamingGUG Tes I’m using a switch oled
@GrownUpGamingGUG6 ай бұрын
@@BlackPoisonGamez it doesn't work for switch oled. Only v1 unpatched switches.
@BlackPoisonGamez6 ай бұрын
@@GrownUpGamingGUG ohhhh ok thank you. Do you know a method that does that doesn’t include me having to screw my switch open?
@GrownUpGamingGUG6 ай бұрын
@@BlackPoisonGamez only v1 unpatched switches can be soft modded now. Other switches needs to install a mod chip.
@alexanderjoserosarioindria28118 ай бұрын
amigo una pregunta ... mi switch tiene la magia, pero cuando quiero conectar luego de cargarlo porque se descargo completamente, no ha querido encender, con el programa.---- que debo hacer
@GrownUpGamingGUG8 ай бұрын
You might need to charge it longer. I'm not sure of your situation.
@corysmith38956 ай бұрын
Should I update my stock firmware after i finish setting this up? Also I got an error on the tinfoil driver where it says "Could not load keys.txt, all crypto operations will fail" with the new nuts 3.3 files. any idea why?
@GrownUpGamingGUG6 ай бұрын
You need to update stock if you go online. It's up to you if you want to update or not. I'm using nut 3.3 and didn't have that error.
@crazynjmanАй бұрын
if i have games and things saved to a sd card already in my switch how do i transfer them to the sd card i will use for this?
@GrownUpGamingGUGАй бұрын
I wouldn't, it's not really important honestly. Not worth the risk of messing stock firmware data to emunand data. That's just me.
@muhdnurazmin84914 ай бұрын
I got stuck on hos panic occured code 06, did the same steps over and over again from the beginning but the result is still the same, could anyone help me with this please 🙏🏻
@GrownUpGamingGUG4 ай бұрын
what step?
@muhdnurazmin84914 ай бұрын
@@GrownUpGamingGUG In minute 25:32 step, my switch doesn't turn on and reboot like yours
@GrownUpGamingGUG4 ай бұрын
Are you sure your files are correct? Atmosphere, Hekate, payloads and sigpatches need to be updated and support the firmware you are on.
@user-jd2mt4kl2j4 ай бұрын
So I have a oled pre modded switch I just bought and I was trying to set up the emummc on the sd file and I did it and completed the installation but whenever I boot up the emummc nothing pops up and it stays as a black screen, can you help me? Thanks!
@GrownUpGamingGUG4 ай бұрын
It could be many reasons really. For starters, make sure atmosphere, hekate, payloads and sigpatches are correct and updated. It might be the launch settings in hekate. I'm not really sure without knowing your setup.
@user-jd2mt4kl2j4 ай бұрын
@@GrownUpGamingGUG you where right! The person I bought the switch form had not updated everything I just got it working, thank you!
@GrownUpGamingGUG4 ай бұрын
@@user-jd2mt4kl2j glad you got it working so quickly 👍
@TrapzPlayz8 ай бұрын
literally the best guide out there!! thank you so much man :))
@GrownUpGamingGUG8 ай бұрын
Thanks for the comment! Happy New Year 🎊
@TrapzPlayz8 ай бұрын
@@GrownUpGamingGUG happy new year! 🎉🎉
@georgeliard25618 ай бұрын
After you did i, did you find anything suspicious on ypur computer like a virus or something because iam scared to do it
@GrownUpGamingGUG8 ай бұрын
@@georgeliard2561do it on a computer at a public library.
@TrapzPlayz8 ай бұрын
@@georgeliard2561 no bro, as far as i know none of the files had a virus. if they had, they wouldve been automatically detected by my antivirus
@mafakabebe8 ай бұрын
Thanks for doing this i had some issues tho cuz i was doing it with an rcm loader but i fixed it but i still have a question. if you go in launch you have 4 options right like stock and fusee but what are the other 2 for?
@GrownUpGamingGUG8 ай бұрын
I think some people may have use for different launch options. For me, I just use stock sysnand for online play, and cfw fusee emunand for other stuff.
@danialonso48603 ай бұрын
After updating "Failed to register placeholder NCA". Please, help!!
@GrownUpGamingGUG3 ай бұрын
Make sure your Sigpatches, Atmosphere and Hekate are updated.
@Dontwhisk4 ай бұрын
Why can’t the microsd card be the microsd card that’s already in the switch
@GrownUpGamingGUG4 ай бұрын
You can, it's just 32gb, you're not left with a lot of space after for your backups.
@Dontwhisk4 ай бұрын
I have a 128gb microsd card on my old switch
@GrownUpGamingGUG4 ай бұрын
@@Dontwhisk that's fine
@Duplicated7 ай бұрын
hi im really sorry if this is a dumb question but we can only play official games ? like cartridge, not games installed by tinfoil right ?
@GrownUpGamingGUG7 ай бұрын
you can install your backups with tinfoil.
@drmountainman27498 ай бұрын
ok so now when I switch back to stock firmware, internet appears to still be blocked. Is that sound right? How do I get back onto Nintendo servers to download more of my digital games?
@GrownUpGamingGUG8 ай бұрын
If you used 90dns setter on emunand it doesn't change the internet settings on sysnand. I think you should check your internet settings on sysnand, make sure DNS is auto instead of manual. Also, make sure you are really on sysnand before attempting to go on Nintendo servers.
@khaoskroc4 ай бұрын
I formatted to fat32 AND accidentally deleted important files. FML
@GrownUpGamingGUG4 ай бұрын
i've been there. i accidentally formatted my d:\ on my computer instead of e:\ the sd card once.
@GrownUpGamingGUG4 ай бұрын
that's why i mentioned in the video to double check the drive you are formatting.
@spltnnocto1245 ай бұрын
If the screen comes on is it still gonna work? (Asking bc I don't have an rcm jig so I'm using a paper clip)
@GrownUpGamingGUG5 ай бұрын
If you are in RCM, when you power on, nothing should show on your screen.
@spltnnocto1245 ай бұрын
Ok i have to reposition it then
@your_favTeacher5 ай бұрын
Are there any other formaters i can use, sadly it wont allow me to use that one?
@GrownUpGamingGUG5 ай бұрын
I only know this one for free. Sometimes you need to format it with windows first, then use the program to format immediately afterwards.
@possi2131Ай бұрын
Very chaotic video, full of errors. Maybe cut them out next time? Thank you anyway.
@GrownUpGamingGUGАй бұрын
Noted!
@JS-wj6vbАй бұрын
What do you mean by errors?
@quangtruong63487 ай бұрын
Hey i followed you're guide when i go to systems how come none of the games show up
@GrownUpGamingGUG7 ай бұрын
What systems?
@adriansanchez29436 ай бұрын
When I did the sigpatch updater and rebooted it showed an error code 2002-0039 what do I do
@GrownUpGamingGUG6 ай бұрын
I'm not sure. Maybe just remove it. Sigpatches you can do it manually.
@olivervazquez56915 ай бұрын
Its says the sigpatch site is taken down. Do you have any tips?
@GrownUpGamingGUG5 ай бұрын
yes it's been taken down, you can still probably find it online else you can get them manually too. good luck!
@fabioconde71457 күн бұрын
Bro how can i switch the ports to off
@GrownUpGamingGUG7 күн бұрын
@@fabioconde7145 what ports?
@vietdragon56105 ай бұрын
do it slow down ur nintendo swich?? if you install soo many game in it?
@GrownUpGamingGUG5 ай бұрын
No it doesn't
@mrpaddenstoel908119 күн бұрын
For some reason the emummc is still disabled after i checked for free space could u help??
@GrownUpGamingGUG19 күн бұрын
What do you mean check for free space?
@mrpaddenstoel908119 күн бұрын
@@GrownUpGamingGUGwhen i created emuMMC it says its still disabled
@GrownUpGamingGUG19 күн бұрын
I'm not sure, for me when I create emunand it takes some time and then it's there.
@mrpaddenstoel908119 күн бұрын
@@GrownUpGamingGUGi did the same but it didnt create it (it says disabled) And everytime i try again it says: Error (5) while creating I cant go any further and cant find any answers online 😢
@GrownUpGamingGUG19 күн бұрын
@@mrpaddenstoel9081 maybe use another SD card?
@patrickallen58227 ай бұрын
hi got switch playing "borrowed games" lol. Question can i keep it in sleep mode or do i have to always put it into rcm mode before i can use it. Thanks
@GrownUpGamingGUG7 ай бұрын
You can keep it in sleep mode. But if it restarts, if you have AutoRCM on, then you need to inject payload, or if you don't have AutoRCM on, then you need to use the jig and hold vol+ and power on to put the switch in RCM and then inject payload.
@AlkaiserNeo8 ай бұрын
Hello! Question! Is there a way to make the Switch boot up by simply holding the power button like normal? I noticed that I have to plug it into my computer every time I want to turn it on.
@GrownUpGamingGUG8 ай бұрын
no that i know of. you can set it to auto RCM which means the switch boots into recovery mode every time you press the power button but you still need to inject payload when the switch is in this mode. you don't have to plug it into a computer to inject payload, you can use a phone or buy a rcm jig.
@AlkaiserNeo8 ай бұрын
Ok. Thanks. I'll just use sleep mode then. This is still pretty cool though.@@GrownUpGamingGUG
@TWOBITONEGUY8 ай бұрын
Mine has been like that for a long time and the good thing is you don’t need a jig I just connected my rc loader and it’s boots the bad side is when the battery has Completely drained it’s takes hours to get a little Percentage of battery once I boot Atmosphere everything goes back to normal
@alimccullough50396 ай бұрын
when you say input the port and ip address on filezlla where can i find my ip address and port details please?
@GrownUpGamingGUG6 ай бұрын
When you open the FTP app on your switch, it's written on the switch screen.
@alimccullough50396 ай бұрын
after applying 90dns setter when testing nothing is blocked, i followed everything
@GrownUpGamingGUG6 ай бұрын
It works for me but I have some other people in the comments saying the same thing. It maybe location dependent. You can try manually setting the DNS in your internet settings.
@alimccullough50396 ай бұрын
how do i do that please? @@GrownUpGamingGUG
@alimccullough50396 ай бұрын
also you whizzed through the filezilla bit where and what do i need to input in that?@@GrownUpGamingGUG
@GrownUpGamingGUG6 ай бұрын
When you open the FTP app on the switch, it's written on the switch screen.
@GrownUpGamingGUG6 ай бұрын
When you config your WiFi settings, select manual instead of auto for DNS settings. Go online and search what IP address you should use depending on your location to block Nintendo servers.
@Originalgremlin8 ай бұрын
Any idea why my 90dns isnt working? everything else went fine. Ive triedd multiple times and the tester always says the servers are unblocked after using the blocker
@GrownUpGamingGUG8 ай бұрын
Not sure, but you can set manual DNS in internet settings, you got to look up the IP address to use online though.
@steshancorea44628 ай бұрын
Hey so you might have already tried this but you gotta reboot after setting 90dns press y
@brdane6 ай бұрын
If im doing this to a switch with save data, I assume the save data will still work once the switch is jailbroken?
@GrownUpGamingGUG6 ай бұрын
Yes
@brdane6 ай бұрын
@@GrownUpGamingGUG Thank you, friend!
@GrownUpGamingGUG6 ай бұрын
@@brdane you're welcome 🤗
@tosinoladele9437 ай бұрын
hey man followed your guide everything works besides from when I try to backup up my emummc any tips on how to fix it, it says failed to find partition
@GrownUpGamingGUG7 ай бұрын
i didn't backup my emunand. i just created it on sd card and just backup the emunand folder.
@tosinoladele9437 ай бұрын
@@GrownUpGamingGUG ah thanks so much bro makes sense