Switchback turn signals | Sold the nittos

[@deadbolt8285]

Larry looks so good!

[@jacobn3160]

2” lift coils on Larry. Even a leveling spacer would look good, but those factory springs are probably due for a replacement anyway

[@straight4.646]

@American_Fighter I have a 3in spindle lift and a 1.5 level puck same style as Larry and it honestly rides stiff but not uncomfortable and not bouncy.

[@dillondufrene5373]

I have the same switch backs and have not had a problem with them since, everyone ask about them

[@americanoutdoorstv7648]

Nice! My guy went from 25k to 61k REALLY quick! Cant wait to see him with 100k subs and a verified logo by his name!

[@adamsmidsouthdetail4979]

Larry looks awesome he'd maybe look better with the ford expedition bumper just saying

[@dustybaker1273]

you can get a new blinker relay from auto zone for led turn signals which are much easier and a better permanent fix for the hyperflash

[@alexisturntup03]

Part # for relay?

[@desmondigou233]

You should buy a king ranch Black and Tan version and do like twins. I’m thinking about buying one and naming it Clyde and doin it kinda like larry

[@dannypatrick6262]

You could have just replaced the flasher relay up under the dash with a led relay so they will flash right

[@sinceregrant3765]

I know I'm always late aye just ordered mine today hope I don't have any problems I have a short bed 97 f-150 so I don't think anything will be wrong lol💯I guarantee switchback fr

[@drewsnider8893]

Put the tractor tires on earl. It’s sitting without a setup so why not

[@Daniel-bm4zn]

Hopefully my truck will look like Larry

[@justinmoon4350]

Love this wheel tire setup. What is the lift kit setup and wheel/tires and off set? Would like to do something similar

[@fer.a5262]

Lifting the front up might be the moves

[@robertbidochon7949]

fix Larry's front bumper and put a short antenna on it.

[@securedabagesteban]

That’s a nice looking truck question I have to ask where did you purchase the clear turn signal housing I been looking everywhere.

[@mfthick]

Hey man make sure the switchbacks are installed in the correct orientation, if they're backwards you wont get the switchback effect. just the orange turn signal and the white turned off

[@eggdaddy4153]

You should put the hood guard back on. It would look so good and would match the wheels

[@salvadorlongoria3596]

Larry would look sick with some c shape led tail lights

[@johnparker9324]

They also make led flasher relays instead of the resisters having to be wired in I had to do that on my 1995 Tahoe

[@firestancegang132]

Tailights on f150 and get lightbar on it

[@tjthompson4672]

He gone put the reps on the ford and wanna keep it

[@coltinwatson6600]

i straight piped my 03 5.4 😬

[@ko4wyt245]

Modern badges

[@camdenlambertz5693]

Help….I bought resistor kits for 3157 led bulbs and they came with 2 resistors on each of them… the turn signals work but DRL lights don’t work now? Would that be because there’s 2 resistors

[@Jake-ej7yf]

can we get a hair reveal soon

[@lmfscrew]

Ain’t got none

[@sethsnipes408]

@@lmfscrew instead of using those fire hazards. Go to advance auto and get the flasher relay I had an 01 and that's what I used for mine to quit hyper flashing

[@TurnThemWheels]

@@sethsnipes408 yeah I replaced the flasher relay on my old 2001 tundra

[@DOODER4X]

Look up Cruzin with mel

[@colbybailey5088]

But hood scoop on it

[@russellglanz9786]

Y not just get a directional relay. Mine are hyperflashed. Kinda like it kinda don’t

[@tylersuttles4164]

Houston wanted to help you load up them tires didn’t he!😂 been loving these vids man and I wanna see more on earl!

[@lmfscrew]

He’s always trying to help haha earl videos soon!

[@Pissingonmyflowers]

Could've just changed the relay under the dash to fix hyperflash

[@alexisturntup03]

Could you explain,just recieved same switchbacks and have 02 F150

[@Pissingonmyflowers]

@@alexisturntup03 there's a relay under/behind the dash that you have to replace. Common problem when you switch to all LEDs. Just Google it and you'll see a relay for hyperflash for a 10th gen f150. You have to remove on flower dash panel to get to it but it's pretty simple

[@jacobhughes2581]

Larry looking clean! I’ve been wanting to do this to my 10th gen, definitely doing it now!

[@The_Crasher-xj4el]

Did these in my 95 obs Chevy... down here in florida people always stop and stare! They’re used to seeing it in their Mercedes and stuff 😂

[@jackson8447]

install the 2 inch coil springs on Larry pleaseee

[@tristenmckenna7764]

What happend to all the chrome on baby squat?

[@ruben-jb7ru]

Should’ve got a flasher relay instead, they like $7 at autozone. It’s located under your steering wheel and it’s plug inplay.

[@elijahbonilla2002]

Earl looks good to

[@Jonyj8dp]

What kind of bed cover on Silverado?

[@AyyItsJk]

I’ve got white turn signals rn on my Jeep. Looked in to state law and turns can be amber or white

[@kaellee6541]

Can I get 2" spindles for diy a 99 chevy suburban

[@Rooftop2468]

billet grille would look good 👌🏼

[@danielwright_69]

i did they same thing you did bought the exact same things off the links when i installed them they still hyper flashed. do i have to get ones for the taillights or just i get duds?

[@Htownballla]

You must really stay in the sticks, all that late night clappin 🤣

[@seanmadigan5505]

Don’t use resisters. Get the new turning signal relay for led bulbs at autozone for 17 bucks. It worked for me and no splicing or hot resistors

[@throwingbeef3524]

I was wondering this myself. And wanted to ask someone who has already done this. I'm about to start converting mine over to LEDs. and was wondering exactly how to do this. Or if they make a flasher which you speak of. Because I really dont want to have to splice in 4 turn signals.

[@riccochettv8638]

you interested in selling Larry?

[@Migo3456]

Lift Larry more bro

[@leemyers5898]

Put the bigger springs in the front

[@bandit0724]

I don’t like Larry’s wheels just don’t look right to me man

[@americanoutdoorstv7648]

I think they’d look better if the truck was a tad higher

[@bandit0724]

@@americanoutdoorstv7648 facts, I like wide but there just something about these wheels on Larry I don’t like

[@americanoutdoorstv7648]

@@bandit0724 agreed.

[@michelleparrott2163]

Yes please take those wheels and tires off of Larry!!

[@rubyrednation7198]

You should Rhino Line that grey strip front and back bumper all the way around

[@pjstryke3254]

I’d like to see led taillights, and paint match bumpers in the white color

[@02mp9696]

I have always hated this year of f150. But im starting to come around with yours lol 👍🍻🇨🇦

[@ryantaylor4205]

Hey buddy, any way you could maybe make a video on what you’ve done to little squat? I want the same look on my truck and the sound and all but mines black and I’m doing snowflakes but I love the way it sits and sounds from what I can tell

[@chiefsosa4442]

Larry needs roof racks and level kit

[@derekwilburn8100]

Are you going to ever put a sound system in Larry?

[@chadreasons5398]

Can you please do some engine mods to Larry? Maybe a 5.0 swap?

[@wesrose4371]

Show the lights at night to see how bright they really are

[@jamesdockery6609]

You make me wanna buy one and I’m a Chevy guy

[@kylehenderson3083]

The easiest way was use a led flasher relay I just did my 06 f150 with switch back leds

[@andycliett3346]

Please please please don’t lower any of em. They’re all clean as hell lifted

[@ImBradSpencer]

Hey man, I got the same truck as you I was wondering do you think you could fit 35s on ole Larry if you stepped it up to a 5.5 inch lift? Reason I’m asking Bc I’m getting the 5.5 for my truck

[@matthewpearce5593]

I have a 2010 F150 and ordered these same lights and resistors and installed them exactly like you did and they still hyperflash...any suggestions?

[@jonmoreno3048]

What did you use to shine up you bumper? It looks pretty good.

[@coreyreimer5171]

Where did you get the bulbs?

[@ghosted4403]

add more lift to larry!!!

[@Rich-gd4fc]

Who else is watching this on on their switchback turn signals? I know I am!