Sword 1X Rear Derailleur Installation Guide

Рет қаралды 10,100

microSHIFT

Күн бұрын

Пікірлер: 39

@davidhsieh604 Жыл бұрын

Kudos to microSHIFT for the release of the Sword groupset. Looking forward to videos of the 2x setup.

@EletronicaCatia Жыл бұрын

perfeito, perfeito, completa aula muito obrigado

@scottatkins8381 Жыл бұрын

when will this be available for purchase?

@microSHIFTTECH Жыл бұрын

Parts should arrive at distributors this fall, sorry I can't be more specific!

@dser4455 3 ай бұрын

would a flat bar adventX trigger shifter be compatible with a sword 1x mech?

@microSHIFTTECH 3 ай бұрын

Yes, 100% compatible

@jacklo325 Жыл бұрын

Still cannot find the sword rear derailleur, any closer ETA? And also the advent x ver.2 rear derailleur availability?

@microSHIFTTECH Жыл бұрын

Ver.2 just hit the US, it's available at a few online retailers and your local shop can get it too.

@SolidxSnakexDuke Жыл бұрын

I got the micro shift road schifters for Alfine 8 gears is whas amasing and jet i can´t wait 4 Sword

@masajoced Жыл бұрын

Where to buy?

@microSHIFTTECH Жыл бұрын

It's not in stock yet, should be available globally in the fall.

@edst8600 6 ай бұрын

No info on Sword clutch maintenance :(

@themindunset 11 ай бұрын

When? Tons of great reviews, can't buy the 2x10 drivetrain anywhere. WHEN will we be able to purchase this?

@microSHIFTTECH 10 ай бұрын

Apologies for the late reply. Sword is selling better than our distributors predicted, so it's taking a while to become available again. If you see some in stock, buy it!

@allanalvarez1757 6 ай бұрын

Will a 12 speed chain work in this groupset?

@microSHIFTTECH 6 ай бұрын

It will probably function, but the shifting will be a lot slower than with a 10 speed chain.

@Mateusz_17 10 ай бұрын

Can I install a bigger front sprocket to 1x10 Sword?

@microSHIFTTECH 10 ай бұрын

Yep!

@JohnSmith-ox7xc Жыл бұрын

I take it the shifter has a spring in it for the small paddle? Also I'd be curious is there would be someway to get a 48 cassette working on the 2x.

@ondrejmanych5688 Жыл бұрын

they have 2x version already

@JohnSmith-ox7xc Жыл бұрын

@@ondrejmanych5688 yes but it doesn't accomodate the 48 tooth, only 38 max cog despite having a greater capacity.

@ondrejmanych5688 Жыл бұрын

@@JohnSmith-ox7xc Oh I see now. I was mistaken that it is the same for both.

@microSHIFTTECH Жыл бұрын

To use an 11-48 cassette with a double, you would need an incredibly long derailleur to take up all the chain slack. Like, it might scrape on the ground. So, it's really not feasible for us to make something like that, unfortunately.

@ENDRJUZ 10 ай бұрын

Hi. Is it compatible with Deore XT 10s shifter? THX 😁

@microSHIFTTECH 10 ай бұрын

You might be able to get it to work, but it would not be optimal. Fully compatible with ADVENT X however.

@cliffsangelsphotography Жыл бұрын

My gravel bike came with an 11-51 10spd cassette. Can the Sword derailleur go up to 51?

@microSHIFTTECH Жыл бұрын

Hard no! The ADVENT X Ver.1 rear derailleur had some wiggle room to go to a wider cassette, but Ver.2 and the Sword rear derailleur are limited to 48t.

@cliffsangelsphotography Жыл бұрын

@@microSHIFTTECH thanks. I'll keep my Advent X derailleur, but I'll definitely get the Sword shifters

@LtKojak Жыл бұрын

this ticks allmy boxes, when avalable in EU?

@microSHIFTTECH Жыл бұрын

Should be available this fall!

@samwu1202 Жыл бұрын

Is 2x setup fit with 50/34 - 11/34 gearing?

@microSHIFTTECH Жыл бұрын

Our 2x system uses an 11-38t cassette and either a 46-29 or a 48-31 crankset.

@ondrejmanych5688 Жыл бұрын

@@microSHIFTTECH 46-29 with this casette sounds pretty awesome for a hilly area. What about doing some adventure/bikepacking version of this? That would basically mean fitting the smallest small ring possible and bigger one. I think people would love that. There is a hole in the market and you have to hack something to make it.