SYMPTOMS OF A BAD FUEL RAIL PRESSURE SENSOR P0190 P0191 P0192 P0193 P0194 CODES

In this video I explain why you're getting P0190 P0191 P0192 P0193 AND P0194 fuel rail pressure sensor codes. In addition, i explain all possible symptoms you may experience with a bad fuel rail pressure sensor.
Top5autorepairs
Subscribe

[@johnvrbka570]

As a mechanic I just replaced one on a 17 duramax LP7 it's located on the front rh side rail. Just remove the inlet air tube & throttle valve. There was a discrepancy between sensor 1 & 2 took me a while to figure out there is only one sensor meaning there are 2 sensors in one. Test states key one engine off & should be no more than like 290 psi difference between the 2. It was well with in the spec. While driving I could see 3000 psi difference between the 2. There is also a bulletin about the connector. It looked good and did a drag test & felt good but I replaced the connector anyway. After which I saw around 100 psi difference between the 2. Problem solved. Oh was getting a po191

[@jamesgregory7089]

This video is short but very informative. Thank you.

[@stephenfritz7493]

...fixed a hard start for me

[@mohammedsajjad5943]

Will there be a possibility of code not appearing but pressure sensor is bad.

[@bolden2k12]

Im getting a P.0087 code

[@뚜벅이오]

I got the code 0192 and it cranks, but it doesn't start at all?

[@smokieklown274]

Common with Fuel rail system pressure too low ( also a P0087 code) im having the same issues.. obly its throwing both P0087 and P0088..

[@smokieklown274]

*only

[@fullycircle262]

that sensor can give error code like "fuel temp issue" ?

[@TW-80]

Had a problem for months, symptoms started as a slight, random and intermittent "cough" at motorway speeds. No engine light or fault codes, then it got a bit worse after a while with a random dive under hard acceleration. then I finally got the p0193. It really took about 6 months if driving to finally get a code. Ford Mondeo 2008, 2.5T

[@JS-ri2rx]

What was the problem?

[@ScienceDayYT]

What was the problem?

[@chaps203]

Same situation on my 04 Lincoln LS v8. Hoping replacing the sensor will do the trick cause hoses and all that seem out my wheelhouse

[@DigitalDissident]

What was the problem?

[@jansotik8466]

Hello , I have Dodge Nitro 2,8 crd , 4x4 177PS , 130kw 2008 . Somebody who knows fault code P2453? Fuel filter pressure sensor ?

[@danieljavier7104]

Having a P0191 on a 2008 mustang have replaced the sensor once already any ideas ?

[@jtdouglas9535]

Great stuff my friend great stuff

[@josuekisembo1177]

I’m getting P0191 on 1AZ-FSE only after long distance drive. hesitation symptoms , check engine light come and disappear, after restart I can normally drive but just feeling low acceleration, is this pressure pump or I can still replace the fuel rail pressure sensor,

[@carlosmerino5547]

I will replace fuel rail pressure sensor first, and drive for wall , if not take to mechanic to check fuel pressure , they will tell if fuel pump, check fuel filters if it has if not have fill filter throw in trach that truck. All truck must have fuel filters, start with filter first

[@yasinugur986]

Hi my friend, can you pleade share with me how you solved it? I have the same deviation and couldnt find any solution :( Would be very helpfull.

[@ajharkhan3293]

P08700 fulte code Audi Q5 diesel

[@Top5AutoRepairs]

Is that the correct code?

[@saifo7773]

cobe 2539 patrol y62 and I changed the fuel pump front and back and the problem is still there

[@shwndh]

Awesome man! Short and straight to the point. I'm having P0089. I'm thinking my issue is the the low pressor fuel sensor or low pressure pump. No drivability issues. Listing the P0190 codes is helping me to eliminate the high pressure fuel rail sensors.

[@ricardorohden5421]

Have you fixed it? im having a intermitent P0089. Thank you

[@shwndh]

@@ricardorohden5421 Yes. ECM update with GAP IID tool fixed the issue. It was just an over sensitive algorithm.

[@ricardorohden5421]

@@shwndh Did it some months ago, no luck =/ thank you!

[@MarieGamboa-w2e]

Fuel short circuit problem

[@DigitalDissident]

+1

[@escobaresco7855]

can it cause misfire

[@dxcpasamonte8347]

I changed the sensor, but still up and down pressure

[@konstantin-big]

Then the problem wasn't a bad fuel rail pressure sensor Did find a solution????

[@mystiktv4066]

I’m getting P016F

[@jacobchitwood4365]

Same. Did you figure anything out??

[@christianlorenz843]

Thanks!

[@Top5AutoRepairs]

Thank you for supporting the channel!

[@christianlorenz843]

@@Top5AutoRepairs You bet! Thanks for the help. 🤙

[@joenguyen-vlog8063]

So the possible cause could be the fuel pump ? I am getting a code P0192 for 2016 CX5. Already replaced the fuel filter and the pressure sensor. Car can start and idle. But do have that code. Any suggestions?

[@JackedITguy]

did u change the fuel pump and it got rid of light?

[@joenguyen-vlog8063]

@@JackedITguy Code is there after the pump was replaced.

[@JackedITguy]

@@joenguyen-vlog8063 yeah I think might have to replace the fuel pump in in a similar situation rn will do it when I have the time

[@TechGod7]

Mine is leaking could I replace it?