Syncrowave 210 TIG/MIG Complete from Miller

[@alexcorreia5959]

What’s the recommended bottle size for the “cart”? Can it hold 2 120cf bottles or better 2 80 cf bottles

[@joshpit2003]

I can't figure out why I would choose this Syncrowave 210 over the Multimatic 220: - Similar price. - They both do AC Tig. But Millermatic seems to have the following advantages: - better duty-cycle. - better MIG gun for non-aluminum applications (not a spool gun) - Allows for larger 8" DIA mig spools. - Higher MIG Amp output (230A vs 210A) - lighter in weight - smaller in size I loved my old Syncrowave 200 and am planning on purchasing a replacement. What advantages (if any) does the Syncrowave 210 have over the Multimatic 220?

[@MillerWelders]

We recommend checking out those product pages and spec sheets on our website to see which better fits your welding needs: MillerWelds.com.

[@joshpit2003]

@@MillerWelders I already looked at the spec sheets. Hence my question as to why I would choose the Syncrowave 210 over the Multimatic 220. (be sure to expand my original comment to see details).

[@Motorrad127]

From what I've noticed on machine specs, the 220 has slightly more mig capabilities(3/8"), but it doesnt do AC pulse. The 210 is slightly better for stick welding(6010 electrodes), and does have AC pulse. The format/layout of the spec sheets is so different they are difficult to compare. Personally I like the 220 better because of the interface and higher MIG capabilities, but if it doesnt have AC pulse thats kind of a bummer.

[@billyroque7857]

looks like a great machine. in regards to the spool gun, what are the differences and similarities to regular mig guns? What am I losing versus an actual mig machine?

[@horseblinderson4747]

Billy Roque have to run 4" spools aka 2lbs for steel 1 lb for Aluminum.

[@horseblinderson4747]

It's actually not a bad set up it just costs way to much if you ask me.

[@KatyLynnWinery]

Do you have any links regarding the output on feauture for Tig-Welding process? Do you have to lift start the arc then?

[@MillerWelders]

Thanks for reaching out, Adrian. Here is an overview of the Syncrowave 210: kzbin.info/www/bejne/iWikgpdpfLqlqac. We would also recommend checking out the spec sheet which is located here: MillerWelds.com/equipment/welders/tig-gtaw/syncrowave-210-tig-welders-m00488. Please let us know with any additional questions.

[@jasvan4359]

What does the Climate do to the Inverter machines since they are all solid state , my welders are in the Garage and pole barn ,their is no climate control such as Heat in winter and A/C in summer their is high humidity durning the rainy seasons what effect will this have on the Inverter machines ? I rdady have two transformer machines that i owned for at least 22 years now with no effect

[@MillerWelders]

Thanks for reaching out. Inverters are made with more sensitive electronic components than transformer based machines. Because of the sensitivity of the electronic components used in inverters, the inverter are more sensitive to temperature. You will not and should not expect the same results when storing an inverter outside verses storing a transformer based machine. Thank you.

[@jasvan4359]

I like the welder I am in the market looking for ,the tig ,and mig features all in one acdc ,thumbs up ,, But I most likely won't buy this one because of all the pushing buttons on panel to set up different processes and parameters ,To me it would take too much time to adjust power and or wire speed ,having to push a button 2 or 3 times to get to wire speed to make a correction or 2 I like the switches and knobs faster on the fly to make changes,

[@horseblinderson4747]

jas van It's also spool gun only, also only painted blue and assembled here in America probably mostly from foreign components.

[@MultiAudrey1234]

Hi! I'm interest in buying a synchrowave 210. I will mostly do tig stainless with it but I would like to know if its possible to mig weld steel with the spool gun? GMAW, FCAW, FCAW with autoprotected wire? Thanks and sorry for my english i'm from Québec!

[@MillerWelders]

Félix Picard Yes, the Syncrowave 210 TIG/MIG complete package (951616) does provide functionality to GMAW. This includes: solid wire steel, 75/25 shielding gas, CO2 shielding gas, stainless steel with Tri-mix gas, aluminum with argon and flux core with self shielded wire. However, it was not designed to weld flux core with a gas. If you have any further questions, please let us know.

[@goodmoney2306]

Can it used a 30 amp spool gun

[@jimderess2206]

is it possible to use a wire feeder with this instead of the spool gun?

[@MillerWelders]

Thanks for your question, Jim. The only option for MIG welding with the Syncrowave 210 is a spool gun.

[@nicolascossette8362]

it would be an awesome machine if it will.....already pretty much complete features!

[@luckygato8717]

Hi, what generator or power plant do I need to be able to move that equipment outdoors? Thanks

[@MillerWelders]

Hi, Freddy. The Syncrowave 210 requires a 2.8 KW generator when connected to 115V, and a 5.35 KW generator when connected to 230V. The generator size is smaller on 115V because the machine is de-rated where full power cannot be produced. This is the minimum generator size required. We normally recommend a generator 1.5 times the size indicated above.

[@luckygato8717]

thank you very much for your help

[@MillerWelders]

You're welcome, Freddy!

[@ByronBeverly]

I can’t get my 210 to even start a puddle on ac. Dc tig is fine.

[@camarenamartinjc]

I have the machime but i dont have tha mig option , how can upgrade it to use a spoolgun??

[@MillerWelders]

Hello, thanks for reaching out. If you could please provide the serial number of your Syncrowave 210, we can verify if it can accept a spoolgun.

[@camarenamartinjc]

Miller Welders # ME220108J

[@camarenamartinjc]

Thanks for you help

[@MillerWelders]

Thank you for providing the serial number. Unfortunately, this is is an older unit and cannot be upgraded to do MIG welding.

[@camarenamartinjc]

@@MillerWelders thanks.. Also i have this machine can you check if i can buy a spoolgun for it. Millermatic 250x serial number kj184534

[@ccapehart1980]

does it have a 110 outlet on it if it doesn't then no sale

[@horseblinderson4747]

ccapehart1980 It's has the MVP plug which you can just spin off and change too my knowledge they give you both plugs.

[@Jaypeeco]

Can I use a water cool torch with a syncrowave 210?

[@MillerWelders]

Tig Rebel Yes. You are able to use a water circulator/cooler with your Syncrowave 210 if you use the 195380 connector. Please let us know if you have any further questions.

[@Jaypeeco]

Ok thanks miller! Now which coolmate should I choose for the syncrowave 210?

[@MillerWelders]

Tig Rebel We recommend going with the Coolmate 1 115 VAC, a light-industrial 1-gallon cooler designed for water-cooled torches on power sources rated up to 200 amps. You can find more information on the Coolmate 1 here: www.millerwelds.com/pdf/spec_sheets/AY7-2.pdf Please let us know if you have any further questions.

[@Jaypeeco]

Yeah but isn't the syncrowave 210 > 200 amps?

[@Jaypeeco]

Thanks anyways! the main thing is that I can cool down the torch with a coolmate. Now I did tig with an older model sync 250 years ago and it worked until my hands couldn't work anymore. When I worked in Brooklyn and we got a brand new sync250 it couldn't handle welding 1/8" aluminum for more then 10min. It will shut down and trip the breaker. I hope this doesn't happen to me with the syncrowave 210

[@bearkawiboy6246]

A 1/4” thickness limit Is more than laughable!

[@Bryan19910]

I want it soo bad! Lol

[@ALSomthin]

Just wondering what it costs.

[@MillerWelders]

The Syncrowave® 210 TIG MIG Spoolmate™ 150 Package has a manufacturer suggested retail price of $3,799.00 (USD). You can find additional information here: www.millerwelds.com/equipment/welders/tig-gtaw/syncrowave-210-tig-welders-m00488. Please let us know if you have any other questions.

[@ALSomthin]

@@MillerWelders not a bad price for that.

[@enriquetrejo6827]

tengo una maquina miller syncrowave y quiero soldar aluminio que parámetros necesito ponerla maquina para realizar dicha actividad

[@MillerWelders]

Hola Enrique, un distribuidor local le puede ayudarte. Para encontrar un distribuidor cercano a usted, visite: www.millerwelds.com/where-to-buy.