Synergy Mobile Audio 5.1D On The Dyno! 5,000W or Bust

[@Bobbystilz43]

That 1 dislike must be from the guy who wasted his money on a Salt 4k.

[@SiggMark]

Lmaooooo

[@MasterDJRenn]

Facts 🤣🤣🤣

[@coreyreeves6833]

I have the WFO 3.1D. I bought it about a week after watching your video. It is 💯%brutality in the trunk of my car. I've got 3 10" XFL'S in a self built enclosure and the word my girlfriend used was "violent" lol Hands down THE best amp I have ever owned. Thank you for all of your videos. I think I speak for everyone by saying what you're doing is freaking awesome. Keep on rocking out!! Next on my list is the 4ch WFO and a single 15" WFO !! SYNERGY AUDIO #1

[@FatboyBass]

I bought the 2.1 because of your video on it. Have not been disappointed. Thanks for these.

[@MrShiffles]

Who else presses the like button before they even start watching?

[@Road2Rally]

Always XD

[@gilloyola7271]

Yup first thing I did

[@mcf3778]

no

[@handymadness]

Always on this channel 🙋🏽‍♂️

[@RyanBassForLife]

Me

[@jorgem50]

3:18 "find me a 5yr old Taramps amp, I'll wait.....................Yeah you don't find them, they blow the fuck up" YES!

[@xchimnyx]

Five years from now, there will be countless taramps circulating. Taramps did something that companies tend to not do and listened to criticism and made changes for the better. Last I checked, amps don’t blow from time they blow from inexperience user error.

[@bigblank69]

Check out Barevids, he did a breakdown on why a Taramps HD busted and it wasnt user error, it was from the fans blowing dust on the Mosfets causing it to arc and fry... So again... please find me a 5 year old Taramps that was used for powering subwoofers and run maxed out like halfbridge amps are typically run...

[@Bassotronics]

This amplifier made me laugh so much but a good way. While other amplifiers hardly can even reach their true power, this one went way beyond with its actual ratings; it’s awesome!

[@wtmf80]

@16:40 OMG a five channel amp that actually has enough power to make a five channel amp worthwhile for a lot of people!

[@OxBlitzkriegxO]

Sundown has made similar 5 chan amps

[@wtmf80]

@@OxBlitzkriegxO I haven't seen one with 1500 watts on the sub channel.. what model? I'd like to see that!

[@25hztolife86]

That's what I said.

[@needfospeedone]

I agree this amp keeps putting out massive power for a lot less money than sundown amps do, very well made amp, great job 🤘

[@evanfield580]

Wow it's been like a month glad too see you back

[@holeshotinspectionllc2412]

I love my high quality Korean amps, I have a DD m3c, for a Supercharged DD 9915, at .5 ohm.... I do admit on my build in my Durango I’m running a Sundown SFB 8k, 75 ah cmax, 3 psi18 platform 2s, 300 amp JS alt.. I clamped 6651 watts,”on a burp”at 13.7v wired at 1.33, three months on a daily, and 3 shows later it’s still going strong first full bridge amp, so far it’s doing good... Synergy fml, doing work for sure👍👍 respect... Incase anyone is wondering my dd m3c was $1200 rated 3800... Synergy is a Gem 💎 💯 percent...

[@wal]

Beast! I want that 5ch, gimme!

[@bigblank69]

I kept the 5 channel... no way was that going back lol. The 5 channel is my favorite amp I have tested to this point.

[@sunitadhyani1013]

Aren't you both the same guy?

[@loganmilam4065]

@@sunitadhyani1013 no

[@thatunknownguy2680]

I've been looking forward to this video for months. Thanks, Ryan! And now I know why my 1,750 watts RMS Fi Audio Q 18s didn't like 0.5 ohms on this WFO 5.1D. Lol

[@________GHOST________]

MADE IN KOREA GAME OVER :D LOLOLOOL it is a tie between synergy and twisted sounds man what a WORK OF ART :)

[@jr1001jr]

You no like Brazil? 🤷‍♂️

[@root7205]

I hope they go forward with that 5 channel!!!! If the test results are close to rated, That would probably be my next amp purchase for the old work truck..

[@hittinhertzaudio8950]

Ive got a wfo 3k wired to .33 and was clamping over 5800 on it at 36hz

[@scottiffanimccord1509]

Wow, what ohm was you clamping? DUDE post that! Plz leave a link.

[@hittinhertzaudio8950]

@@scottiffanimccord1509 I dont have the pic of the 5800. it was during testing for midwestspl when i was trying to stay under 4k, yes TRYING to stay under 4k haha. Check out my instagram (HittinHertzAudio) and you can see when i did a 151.7 under 4k. When i do my next build ill make sure to get the 5800 pic lol. (And im wired to .33)

[@scottiffanimccord1509]

@@hittinhertzaudio8950 Oh wow your not playin!! I just looked at your instagram. I just made my account last night i will post some pics of my little build.

[@jbell0507]

Do you have a fan to keep it cool or do it handle it just fine I’m thinking about going with synergy

[@hittinhertzaudio8950]

@@jbell0507 if youre wiring below .5 dont go over 15.3 volts. but you might wanna fan if you plan on playing music. Ive got a 8.1 now but when i had my 3.1 at .7 it rarely got warm

[@casey360360]

The thought of designing, fabricating, and installing a multipul alternator bracket for whatever that's going in is making my happy inside... I need to open my shop back up.

[@gijoemolinaro]

Wow man my goodness what an amp now that's a top result 10 out of 10

[@paulmorabito7040]

MOVE FORWARD SYNERGY 5 channel!!!

[@bigblank69]

Let me just say... Its damn good

[@25hztolife86]

Those amps are gonna sell like crazy..... I want one for Christmas.

[@charliefrancis6438]

This seems really good ,great looking insides,didn’t catch the price on your video , I will definitely check these out good job synergy

[@aaronwilcott4561]

Great review Ryan!!!Always look to your videos before making purchases for any of my car audio.I appreciate all you do for "we" the people👍

[@emersonmayeaux2482]

Holy crap !! What a beast of an amp !!

[@robland6118]

Great video man. I'm glad see finally got to see it. I am very impressed with the amp to say the least. I sure wish I could afford it. Sure would have like to have had a chance to own one of the syn series. I guess that dream was shattered.

[@Maswan._.]

YES!!! I have been waiting so long for this!

[@alyssadraculesti]

This thing is underrated like the old Addcom amps from back in the 90's This thing is a frigging BEAST - I have a 525Amp alternator in my car and no way I could power this on peak.

[@pdbnc]

Holy crap I need that 5 channel. I don't care what price it is, it looks perfect.

[@drifttrash37]

Been saying it since day one SYNERGY AUDIO FTW!!!

[@BiGGBLUNT1]

Yessir!!!!!

[@tatialo37]

Yes!!! More amps tests!!!! Thanks for the video!!!!

[@hittinhertzaudio8950]

Lol wait till Curt sends you the wfo 8.1 haha. Ill try and agg him on lol

[@BiGGBLUNT1]

Synergy ftw!!!! Cany wait to see the 8k

[@mccleery3]

Waiting on that 8.1 dyno 🥰

[@soggyfries4347]

Is there such a thing of being a little too conservative with their ratings? Good stuff. I'm with you on this whole Taramps thing. I bought the TS400 for my mids. Sounded like mud. Replaced it with a 4ch Pioneer. Clarity is restored.

[@evilmonstertruck]

Nice dude. Thanks for the content. Always appreciate these videos

[@passionatelyloud130]

I was waiting for you to opened 🙃

[@1970chevy]

Someone lagit with a different opinion about sundown. Thanks for the straight up honest opinion.

[@RobertSmith-nx6tw]

The power output is wicked!

[@kevinnelson9588]

I like how you don't beat around the bush.

[@RyanBassForLife]

Love it crazy loud wish I had $1k dollars to spend on an amp but if I don't even have cash for 2 Rockville DB comp 5s. What I do have is 2 old Hifonics Brutus BRZ 2000.1D wired to .25 per amp strapped to .50 ohms and they work just fine for now. After box rise each amp is around true 1 ohms each.

[@minus3dbintheteens60]

Your power supply is bloody impressive bro!

[@scottiffanimccord1509]

LOL oh dude you got the coolest name!

[@cjon24s69]

A higher S/N ratio is better and 100db is pretty good

[@minus3dbintheteens60]

If it were at 1w then it would be impressive. At over 7KW it *really* isn't, at 1w it must be in the mid 60's

[@cjon24s69]

Hickory Dick Its not much different of S/N of any other amp in its class

[@minus3dbintheteens60]

​@@cjon24s69 I had a bit of a look around and you are right, the HCCA amps, DC Audio, Taramps etc are all around 100dB S/N at full swing. The biggest Alpine monoblock I could think of (MRX-M240) will do 108dB at rated power (1500w) into 4 ohms. So with my math (going by the rated 1935w @4ohm numbers), this Synergy amp is running about 39dB of gain, so you could say that its S/N at 1w output will be about 61dB or maybe even below 60. The Alpine is rated for 82dB. Rockford Elite amps from 2004 (eg T40001bd) are rated for >80dB at 1w also. These are top shelf brands give their manuals detailed and realistic specs, for example, they both admit their S/N figure is A-weighted, the RF amps even include their slew rate! My point is that having shit loads of power like this on the cheap is more often than not, going to come at the cost of a ton of noise at idle or low level listening. But you get what you pay for.

[@Brock_Landers]

That sir is why when I purchased my amp to power my four Sundown SA12-D2s I bought an Orion HCCA 3k SPLX amp. Overkill? Yeah, but I didn't want to strain the amp and have it overheating and clipping out.

[@crazy8sdrums]

Sundown may cost a bit more, but everything they put out is quality and you won't be going wrong...if you are willing to spend a bit more. Some of that money they make is used building the community. How is Synergy interacting with the community? It may not be important to everybody but to some it is.

[@chrisjones6165]

Sundown amps are not USA made

[@crazy8sdrums]

@@chrisjones6165 Neither is Synergy. Made in South Korea.

[@chrisjones6165]

@@crazy8sdrums I never said they were. I run Orion xtr amps my self. I'm not aware of any made in usa amplifiers anymore

[@crazy8sdrums]

@@chrisjones6165 What was your point?

[@chrisjones6165]

@@crazy8sdrums what is your point?

[@silenthaiku5092]

Omg!!! Thats a beast with excellent quality!!

[@1andonlyjoeyb534]

That board looks EXACTLY the same as the Crescendo Audio BC-4K but the BC has dual inputs and not tripple inputs

[@Hittin2thabass]

Ok Ryan we need the below 1 ohm tests...

[@scottiffanimccord1509]

Yes!!!

[@thatunknownguy2680]

I know. I've been running mine at .3 for months. I'd love to know what kinda power it's making.

[@aaronwilcott4561]

I'm sure he would love too,but it's a customer's amplifier unfortunately.

[@themantheman-vo7wd]

Thanks as always for the great videos I will have to look into synergy

[@greenreaper8663]

Wow, that amp is a boss! Great review!

[@RockeyDAproductions]

hay i like the bass boost. heres why. my 8's bottom out of i let somthing like 20hz hit them full tilt, if i use the crossover controls its to aggressive and i loose my subsonic, giver alittle boost the in the 45 and cut the gain down instill that bottom out condition goes away and i still got all my power were the sub can take it, and i got a as much low as im going to see without over travel.

[@rashad5286]

jesus, that amp is a beast

[@scottiffanimccord1509]

Dose he post back? Do you see him? Do you hear his voice? I hear Jesus too!

[@wilsonrawlin8547]

I wish I had found these amps before I bought what I have now. More power and quality for close to the same money. Dammit.

[@BiGGBLUNT1]

Yeaaahhh!!! Synergy baby!!!!

[@benblauvelt9034]

Love the channel and the video keep it up. And what track are you using during the dynos I've tried shazaming it and can't find it or who does it.

[@SeanOMatic]

It's literally stuff they got off of Alibaba from S&I and DONGGUAN ERISSON ACOUSTICS.

[@xchimnyx]

Yesssssssssssssss zBuT tHeY aRe So gOoD

[@CORZER0]

Welcome to the global economy. No longer limited to vendors!

[@SeanOMatic]

@@CORZER0 It's totally the current state of the industry. Sundown gets all of their stuff from DONGGUAN, too.

[@alhi6708]

Thank you boss!!!

[@WeirdJerz3y]

I had my taramps since 2016 DSP 3000, it's been running great. But that amp u tested I'm sure will take alot of abuse.

[@notyobiz6207]

could buy almost two taramp bass 8k for that price! just save the other one for later! lol. decided to use both of mine now tho! all joking aside i love that this amp just shits all over its own ratings surpassing them like that! i wish more companies could do that, that's awesome. thing is built like a tank

[@annihilationindustries1990]

That is not what bass boost is for. And yes u can use bass boost and have it work just fine and not blow subs, The whole point of bass boost is to help with the bottom end of the frequency if your tuning is higher or small sealed boxes. The bass boosts frequency usually 35hz or 45hzor Adjustable to help flatten the bass response. Bass boost is to be used first before your gain, NOT after to just bury the clipping to the max . my box I have at the moment is tuned to 37hz, I use quiet a bit of bass boost to help with below tuning , then I turn the gain up till I see clipping. the whole point is to get a flatter bass response if you're not worried about having the loudest subwoofer for one song . I run a JP2300 on a single 10 inch sundown Classic in a 2.25 cube net box with 36 inches of port area. I beat the shit out of it and its loud , I've had walled set ups and this ten is getting down and hits below 30hz all day long and its been 8 months still slamming. People have been taught just like me 20 years ago that bass boost was bad, but amazing how so many amps still have it too this day. if u use your bass boost correctly it's no different than using DSP for an Audio control amp or alot of home theater amps to get the flattest response u can. So yes when you use your bass boost first u will get to clipping at that frequency first and be under clipping for the rest otherwise u might have a peaky box that rocks out for only one genre of music.

[@allmotorhash]

Waiting for the O series.

[@hippo-potamus]

The efficiency is damn good. I'm impressed.

[@MikeMik86]

I came to find a dyno on these since someone was trying to sell a couple that were blown, kinda tempting but I'm hard pressed to give $250 for an amp that could be completely torched. On another note I have a Taramps HD3000 I paid $100 for that I beat on for 4years until I upgraded it, it didn't sound the cleanest but it got loud with 2 Rockville punishers.

[@95Sn95]

I've never used bass boost on my other amps except my pioneer which the "bass knob" was the bass boost vs remote gain and I would up it only on rock with no bass, but i experimented with bass boost on my new APCLE 1800 because it has frequency for boost. My box is tuned to 29 so on rock it's not as good so I set it at a higher frequency and upped it some and worked good but I turned it off because I still heard not much but a did hear a slight bit of boost down low and I was paranoid it would clip even on low bass type music where I set my gains without it but in theory it shouuuld be ok...but not worth it to me.

[@Jboost412]

Wow that was amazing 1ohm dynamic! And for someone who wants to say taramps blah blah this amplifier isn’t much more then the taramps anyway...and you have to replace the taramps every 3-6 months of your really running it lol

[@ruffnrede2]

This amp is a monster and very efficient

[@johnnypiper1717]

🔥🔥 you think these synergy amps are better choice over Salt amps? I been debating on which 3k amp or 2500 amp to get. Synergy looks pretty good and cheaper then Salt line

[@cpufrost]

Big numbers but I'd be impressed if they didn't use junk caps inside! Rubycon, Nichicon, Hitachi, Panasonic electrolytics FTW!

[@michaelhollon5332]

Over 1,000 watts of dynamic head room @4ohms 🤯

[@minus3dbintheteens60]

about 1.7dB dynamic headroom from 1% THD continuous to 1% THD dynamic at 40hz

[@dellalexander7205]

I'd love to have it

[@Does_it_come_in_black]

Holy crap I need to buy a few ASAP 🤤😍

[@666nacirema666]

i love synergy but i do have a taramps amp thats almost 5 years old

[@scottiffanimccord1509]

Yea I'm with you. A lot of brand bashing in this video, I lost a little respect.

[@JadensPressureWashingYt]

tiffani smith, why be a snowflake

[@matthewjustice3383]

How is she being a snowflake? Don't get your reasoning.

[@xchimnyx]

tiffani smith I did too. If he was talking about a company that actually designed and manufactured the amp he was reviewing I’d be a bit more understanding to the bash. But this amp is literally on Ali baba unbranded, none of these dudes have a say in what the build houses do to their amps. Sundown is the only Company I know of that literally flys overseas and has a hand in their product. Don’t call yourself budget gem or bust, if you’re just going to bust all over the #1 selling budget brand. You can’t cry about longevity when taramps and most Brazilian companies are in their infancy

[@bigblank69]

Lots of butt hurt Taramps peeps... Totally missing the point... Drive a taramps or any full bridge amp as hard as people drive S&I made half bridge amps and watch the smoke come out... Why do I say this? Because half the time I get a full bridge amp on the dyno its so damn finicky I have to worry about it blowing up (and they have... numerous times). Full Bridge amps have failed the most of all amps on my dyno.. And its not from running them beyond what they are rated for... I had a Taramps DISTRIBUTOR talk me out of dynoing a HD5K because in his words if the voltage was too high, or to low the amp could blow, if it was clipping for more than a second it could blow etc... basically trying to give me reasons why the amp is going to blow before I even put it on the dyno... fuck if any of you want the thing, send me $250 and you have a brand new HD5k sitting in the box...

[@gibronjamaludin3683]

Hopefully the orino hcca 5k does something like that

[@tymanG19fan]

Yo awesome vid....and love the language brother 👍

[@25hztolife86]

This Amp qualifies as a Cheater Amp. And, for the folks at Synergy.....get on the trolly.... I want the 150 watts x 4 ch and 1500 x 1 ch amp. Just release it and I'll build my system around this amp.

[@bradmeek]

I'll build my home stereo with this amp 😆😆😆

[@Hertzsogood219]

Agreed!

[@bearxbunny1835]

The Orion HCCA SPLX and even the XTR does numbers way over the rating too

[@joeyholthusen6495]

Drop ohm load a little more on dynamic.. please I'd like to see

[@EBMproductions1]

so top 3 gems is 1.)Orion HCCA 3000.1SPLX thing did 4k to 11k on Big D's channel things just rare 2.)Synergy Audio 5k-9k watts 3.)Wolfram 7500

[@bigblank69]

Dynamic I wouldnt put much weight into... Most underrated amp I have seen uncertified is the Powerus 8000

[@jr1001jr]

👍😎👍 ORION!!! HCCA!!! 👍😎👍

[@lawrencebloom7327]

I wanted to see a half ohm test. I just bought this amp and my only options are 2 ohm or .5 ohm final .. It's actually .4 ohm. Might be too much power for my Deaf Bonce 18 rated at 2700 watts rms. Guess i;ll have to be easy on the knob.

[@thatunknownguy2680]

I've been running this amp on my Fi Audio Q 18s. They're only 1,750 RMS, but can take a beating. I'm running it at 0.3. They get a little stinky at times. 😂

[@Supercharged1976]

So it's a 6500 that they list as a 5k and priced like a 6500. Fantastic amp but they should just call it what it is and stop trying to make it look like it's more than it is.

[@xchimnyx]

Facts

[@rickybobby8294]

Great video. 👍

[@bygboie]

Did Synergy copy Trauma or did, Trauma copy Synergy Mr Blankenship you must answer the question? Absolutely love the up loads.

[@bigblank69]

Neither.... Trauma and Synergy customized designs from S&I... This is not the same thing as RF designing a all new amp, but better than just straight generic

[@maggiecockatiel7177]

Nice amp Awesome job!

[@robertsartino7664]

Could you do a review of the Rockville RXH-F5 5 channel amp and I’d like to know the true ratings and your thoughts

[@dd2kean9tlsfresh13]

Did anyone notice he was trying to be like Wilson audio labs with a little extra if you watch the credits, and if you notice in the beginning I think he hooked up the amp wrong because he goes on about the plus and negative positions... Just saying LOL 🤣🤪😂😁😛

[@adrienturbo]

If he hooked it up wrong, amp would have been blown and unable to test

[@bigblank69]

As mentioned, if I had reversed the polarity I wouldnt have had a video, and I would be out $900 buying the owner of this amp a new one.... The rant was caused because on my test bench I have my power connections drilled into the side of the bench, and I run short runs of power wire to the amp and 3 of them in different orders was really pissing me off connecting them lol.

[@dead6last]

what about a half ohm run? or .8 ? love to see it it looks like a great amp! oh ya i got a 5 year old taramps .. they are better than you say they are, just sayin i like the amps personally

[@bigblank69]

Tramps are decent amps, but they do not like getting over driven at all.. if you run them properly they are fine....

[@quintonlitton6779]

I miss my synergy 2k amp

[@no_vtec_si8167]

What about the comparison of that wfo 5.1d and an orion hcca splx 5k?

[@terranwallace7528]

Love to have that amp on for sundown 18s

[@michaelbartholomew8155]

I'm pretty sure I've seen that same board design in Wolfram, DC Audio, and Crescendo amps. Monster amp for sure.

[@bigblank69]

Wolfram doesn't use S&I (Except for the old C2400)... so you didn't see it there... DC and Crescendo is possible, but my understanding is these are unique boards

[@mcf3778]

it looks pretty familiar to that dc 7.5k

[@shastriroopchand1245]

some serious power there wii

[@rlg222]

WOW! That's very impressive...

[@gregory-vw9vq]

Please dyno a ORION HCCA 8k

[@jayboogie7956]

Just wished that it was way more more affordable or much much much cheaper. I shouldn't have to break the bank just to get the RMS wattage for my subwoofer craving for power. I'm definitely not on the taramp bandwagon either.

[@pdbnc]

Quality, power, budget. Pick two.

[@Lazerchicken69]

gotta pay to play

[@evanfield580]

I wanna see that 5 channel you previewed at the very end

[@bradgilpin9740]

I want one of these sooooo bad!!! To bad the price will double after this video😢

[@hittinhertzaudio8950]

Nope. That was wolfram lol. The owner of synergy is an awesome guy and doesnt pull that kinda stuff

[@Violentbassonly160]

Now it’s $1,100

[@bradgilpin9740]

It’s still 899 on preorder right now. And Curt does seem like a good guy! Always been there to help me out any time I had a question.

[@schons77iceman]

It's 1100 dollars right now

[@FATHERSOFBASS]

Ok wth happens with that first test your shit went back to 15 v after it was done it was on 14v

[@TheJmoniez1]

Which Korean board in a different color heat sink is this now

[@Violentbassonly160]

Similar to Skar audio rp 4500

[@xchimnyx]

Violentbassonly160 skar rp series are Chinese thooooo

[@TONYSTARK-jh2wu]

So out of the 3 test which one is the most important?

[@gregory-vw9vq]

Please dyno a Orion HCCA 8k. That’s what I have

[@charliefrancis6438]

I would love too see him dyno an Orion 8k I have 2 on 12 batteries and my voltage drops below 11 when I really punch it , I would just like to see what they do on the dyno

[@jr1001jr]

I saw BigD dyno an Orion HCCA 3k (cant remember exact model number)... It kicked out over 10k watts. I believe that it topped out somewhere around 11-12k. 🤯 AND IT WAS HALF THE SIZE OF THE Synergy Amp. 🤷‍♂️

[@franksanger2641]

So what did the SYN 3.5k do on dyno??

[@thatunknownguy2680]

The 12 dislikes are from Taramps owners. 😂

[@Jamie-ig9vo]

I've a Synergy Audio WFO 15.2D that's begging for a dyno test. Let me know if you want me to send it your way!

[@michaeljohanson9499]

does it run hot at all

[@michaeljohanson9499]

looks good

[@stevenwiltse9611]

Sundown will. Bet on that!

[@liteflexin8129]

Thanks again