T-Bone's Tips: How To Prevent Sights From Bottoming Out

Does your sight bottom out? Odds are you can fix the issue with some adjustments in your anchor point or peep sight. Travis "T-Bone" Turner shows you how.
~-~~-~~~-~~-~
Please watch: "203" Colorado Whitetail with HUGE Mass | Vicki Cianciarulo"
• 203" Colorado Whitetai...
~-~~-~~~-~~-~

[@oneshotonekill2528]

Great tip like always, thanks again.

[@11796rlv]

thanks for the info i was so stuck with this problem i'll use ur advice and see if it works :)

[@HogZombies]

My 12 year old son got to meet T-bone at a hunting show and shared a hunting story with him. He cherishes the photo he signed for him.

[@Takuplumbing]

Thanks!!

[@matthew197735]

hm this was actually more helpful then the other videos on youtube just got my bow and the sights are bottomed out only get 20yrds out of it! guess its going to the shop to adjust the peep hole already tied the other suggestions

[@bernieatkinson8070]

travis ur the go to man as far as im concerned i am in canada,nova scotia to be precise and its damp to say the least , i recently fletched a bunch of arrows to the colors of the nhl team i love lol used fletch tite glue following the directions precisely all to have the flights tear off after a very few shots ,frustrating, so my ? is this what glue works best for you ty in advance

[@twenglish1]

Any tips on correcting a bottomed out sight that uses retina lock and not a peep? I'm am having some issues with mine

[@mariannesisler2020]

naturally😁

[@fred7705]

Mine is topped out? Is it the same procedure?

[@tray22]

You do have to be careful because using this method can cause your arrow to kick up or down when you move the nock and arrow rest around. What I have is a bow with the arrow rest set perfect and the nock perfect, but I am still out of adjustment on the sights. Instead of detuning my bow I made a steel plate that mounts on the bow and has 2 new holes lower to adjust the sight bracket where it should be. Some sight brackets have that adjustment built in where others don't. You can also move your sight pins closer to the string and that causes the adjustments to be more course, gaining you more range.